Start and stop very slow on Dell Inspiron 531

Similar Questions

• Start and stop too slow

  My computer starts and stops very very slow (more than 3 minutes)

  Hi AngelAcevedo,

  ·         Did you do changes on the computer before the show?

  ·         The startup problem occurs after the connection or if you are referring to restart is slow?

  Follow these methods.

  Method 1: Run the disk cleanup tool.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to set performance options in Windows XP

  http://support.Microsoft.com/kb/308417

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Start and stop is slow in Windows 7

  Original title: I desperately need some help here.

  I have a Toshiba LT, running the Windows 7 operating system. Start and stop is slow, so I downloaded

  MicrosoftFixit to analyze and fix my computer. It is scanned and was told that more than one anti-virus program is running, I'm only using Microsoft

  Security Essentials, also more than one user is logged on when I'm the only person using this computer!

  Several programs are currently running in the background at the start and during the shut down, but I can safely remove. Help, please!

  Hello

  Have you made changes on the computer before this problem?

  Method 1: Resolution of Performance problems.

   

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

   

  Method 2:

   

  Step 1: Check in safe mode.

   

   

  You can also check if the problem persists in safe mode.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

   

  Step 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

  My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• With 32-bit and a clean install also takes a long time to start and a very long time to stop.

  I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

  Hello Duane,

  For more clarity and response, I divided it in its own thread.

  After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

  What are the specifications of material of this machine?

  We might want to try a clean boot and see how that affects the issue.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve this problem.

  Best regards

  Matthew_Ha

• Windows XP Version 2002 Media Center Edition Service Pack 3 running very slow on Dell desktop

  Very slow system Dell desktop for quite awhile.  It was "suggested" that the system is corrupt and OS reinstall may be necessary.  Cannot change system settings and make them 'hold', for example "show the hidden files and folders" under Display/Options files will not be applied.  Other things to try before wiping clean system and starting with delivery complete?

  Hello

  · What is the model number of the computer?

  · You receive an error message or error code when you try to change the system setting?

  · Do you remember all the recent changes on the computer before the show?

  · You have the Windows installation disk?

  1. to improve the performance of the question, try the steps listed in the links below: how to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx

  Slow PC? Optimize your computer for maximum performance: http://www.microsoft.com/athome/setup/optimize.aspx

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Mac keeps restarting and is very slow running

  Why not keep restart my mac and works very slow since I installed El Capitan?

  Most likely because you upgraded an already dysfunctional system without the first fix. Or your HARD drive may be faulty.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

  When you get it working properly, and then download and reinstall OS X El Capitan 10.11.3 Combo Update.
  

• Equium A100-338 has started to go very slow after using the recovery CD

  I used the recovery CD after my Equium A100-338 has started to go very slow, it still seems slower than it used to be.
  I haven't added anything to the computer from the CD recovery and verified the Manager tasks to see if I could spot anything suspicious.

  Statistics say, use 18-22% CPU, but the physical memory is about 68% is this normal or should it be less?

  Is there a list of standard processes I can check against mine to see if its doing something, it shouldn't be?

  Thank you

  Hello

  I think you feel that unity is a bit slow due to the high amount of different processes that run in the context of the BONE.

  The fact is that your laptop supports various features such as buttons FN, Toshiba control buttons, etc.
  All this has needs drivers.

  In addition, as I m not wrong the Norton Internet Security has been installed on your system.
  It s part of the image of Toshiba and this tool could affect the performance of the system.

  I have used in the past, but now changed to another application that doesn t need a lot of material resources.

  So if you want you can disable or delete some of the tools and utilities that are not important to you and could clean the system using a 3rd third party tool called CCleaner

  Welcome them

• use of an input signal to start and stop screws

  IO have a Vi that must be started and stopped by a signal from a sensor on an automated production line. the problem is that the Vi I created to capture and compare images from a webcam placed on a robotic arm that is used to fasten the screw in part needs to be started and stopped a man using the screw that is "run" buttons located at the top left of the façade of the screws. How can I use an input of probe signal (+ 5 V for 10 ms) to statrt and stop the Vi? The Vi cannot be allowed to run when there is no room for the robotic arm work, it would consume electricity that costs money.

  No program in any language can be started by an external signal.  Some software must be running in order to detect the signal.  If this software is an integrated program running on a microcontroller or a multiprocessor supercomputer it still works the same way.  The power required by the computer is probably low compared to the power consumed by robots and other manufacturing processes.

  As you have described your system, you will need a computer that runs all the time while waiting for something to happen on the Web site, which indicates that a paypal transaction has occurred.  What is different from having a computer running LV with a VI in an idle state?

  If your process needs to be thrifty, you expect better have enough orders that you turn the whole sytem market very often.  The cost of automation of all would be excluded by the income of sproradic.

  It is certainly feasible to have a master computer that controls the power of certain parts of the system that are not needed at all times.  PLCs are used to control the State strong relays or contactors put different subsystems.  Make sure that time is allowed for systems comes on and initialization before you begin production.

  I would focus first on getting the automation of a condition but inactive of working before trying to go to the complete power down and control.  I think you will find that the power process will require sitting in a State of inactivity for some parts of the system while the other parts are being initialized, you will need to do in a State of rest.

  Lynn

• Why my computer does not delay when I try to watch the video again? It's a constant start and stop and buffering?

  I get a lot of golf maaterials and lesson over the internet.  It became a real pain and a problem for me to keep up with instructions.  When I received instruction to internet and start to play the video it winds and winds and play them for a few seconds then start and stop throughout the presentation.  What can I do to fix this problem?

  If several computers are using the internet at the same time, it might slow down the video stream on a computer (laptop or desktop).

  Or your internet connection is simply not enough fast to stream the videos you want to watch. There are several different speeds for DSL, so the speed increase may help.

• How to start and stop a task with c#?

  Guys,

  I need a help. I'm trying to reproduce a task created using Meansument & Automation Explorer. The task is very simple create a channel of digital output and send the values 0 or 1 to enable and disable a relay in my board DAQmx.

  Kind regards

  Alexander has.

  I found the solution, add a new item in solution using Add new item choose component or and together the configurations such as a task type that you need. The issue will create a class for your task, this class has all the events to start and stop a task, and you can add your new methods if necessary.

  Thank you all.

  Alexandre Albuquerque

• Records of Vista Media Center starts and stops at the wrong time

  I use Windows Vista Home Premium, SP1 and that you may have noticed that when I schedule recordings for some a particular channel, Media Center starts 2 minutes beforehand and ends 2 minutes in advance.  This affects only shows record from my local affiliate Fox - all other shows for other strings start and stop at the appropriate time.

  I checked the system clock with the start times of the shows and both are correct.  In fact, I saw one day Media Center started to record for a show that did not begin until 08:00 at 19:58 (according to the system time).  I had my TV on at the same time and was able to verify that the program in question had not yet begun, so the flow of the internet was sychned with the dissemination of local transmission.

  It's very frustrating because I miss the end of some shows and cannot always extend registration ends because I'm ordering another channel, the next hour.

  I have the same problem with the FOX network...

  -1 make sure your clock automaticly sets in the internet and update once by pressing the link (which makes that he can see the time server)...

  There are two ways you can go with this:

  -If your departure time is correct, then just go to the Planner and choose the program (or series) you are trying to install, select the recording settings (or adjustment of series) or advanced setting... There is an option to "stop recording" 1 min, 2 min, 3 min, 5 min, until 2 hours after the recording is finished... I have mine set to 5 minutes after, and she fixed it...

  -If the starting time is disabled (as mine is), to enter ERM and manuver to tasks > settings > TV > recorder > recorder defaults

  This is where you define all the flaws of the recorder, find "Start when possible" and "Stop when possible", 4 min value (max allows MCE)... Save and exit, restart the machine too...

  You should be good to go...

  PS, I just read the last sentence in your post, you must only have a tv tuner card in your machine (I have two, and that's the reason why I bought two), so you can always have a problem when recording two different channels (back to back on the same channel should work okay).

• Long start and stop times, offline files

  Systems Windows Vista, Windows 8 server, roaming profiles, Outlook using POP3 Microsoft DPM.  local copies of offline files are set to encrypt.

  Because of past problems with several revisions of files group policy is set to synchronize the start and stop.
  Users are complaining of delays and slow performance during periods of start-up and shutdown.  I suspect that this is because of the synchronization.
  What is available to speed up the synchronization process or to monitor the total size and the speed of the process?

  Server gurus hang out in Windows Server support forums, better to ask this kind of question it:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Reference Dell inspiron 531 vista equipped s won't start

  Dell inspiron 531 s fefuses Vista running at startup. Monitor shows nothing. Once I deleted pwer offers completely for about 20 minutes, it starts then as usual. This has happened for 2 weeks now

  Hello

  1 when was the last time it was working fine?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try the steps from the link below.

   

  Troubleshoot monitor and video card:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Note: Also, check with your diet.

  Hope this information is useful.

• Upgrade a Dell Inspiron 531 to something with more memory and faster?

  Hello, I have a Dell Inspiron 531, 32-bit operating system, and the 3G memory in it but is Vista. I tried to upgrade to Windows 7, but after many attempts, could not go without having to clear everything and start over. So I'd do it if I have to do I was wondering if I could make the machine that is more memory better and faster, without having to buy a new computer say a Dell XPS 8300 (that I'll have to run a lot of photographic software in the future and I understand that this could be a good computer for that?) In any case, it is possible to 'upgrade' the computer something like this please, or I have to save my pennies for a new? Thank in advance for your advice.)

  Hello

  If you upgraded to 4GBs off RAM you won't get many benefits

  Here is an article on what is happening with 4GBs of RAM:

  http://support.Microsoft.com/kb/929605

  "If a computer has many features implemented, the available memory can be reduced to 3 GB or less." However, the maximum memory available in 32-bit versions of Windows Vista is typically 3.12 GB. »

  and you should also consult the Dell manual for your model desktop computer see what amount of RAM your motherboard would answer anyway

  http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

  and here is the reason why you can not upgrade to Windows 7

  There are no Windows 7 drivers written for her by Dell

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=INSP_DSKTP_D531&OS=WLH&OSL=en&CATID=&impid=

  Click on the menu at the link above drop-down operating system

  itonlt has XP and Vista drivers available