How to start and stop a task with c#?

Similar Questions

• Start and stop Virtual Machines with the system

  Hello

  In a server cluster @vcenter HA/DRS 5.1, I enabled start and stop virtual machines with the system option but after I checked two days later, he is off again somehow. What makes this option off? I had a power failure in the datacenter. vCenter server has not been upward. I started all of the ESXi servers manually then went all VMs account is declining. I want that they start automatically when server ESXi upward.

  Thanks in advance,

  Thank you. This option is more valid than if the hosts are part of an HA Cluster license. I suspect that you configured through the traditional vSphere Client and that it is a bug with this client. If you try with the new vSphere Web Client, you will find a notice that it is disabled and there is no button "Edit".

  Concerning

• How to start and stop the APEX?

  Hi all! I am new to this forum and APEX too...

  We are runing (Version: Application Express 4.1.1.00.23)

  I need to reboot the server.

  How can I stop APEX graciously and start back after? Thank you!

  Kind regards

  Ghyslain salvation,

  to reinforce what Mike says. Apex is a database and, with the exception of the HTTP server application, runs entirely on the database. (Note with EPG, its all in the database) It contained in the users/schemas database and built items of data such as tables and PL/SQL packages. If the server that is running the Oracle database in which the Apex is installed needs to be restarted, the database must be stopped, which stops indeed Apex. If the HTTP server is also running on this server (ESS or earpiece of the Apex) then this should be stop as well.

  Of course, if your desire is not to stop the database, but to deny the user access to the Apex, perhaps for purposes of maintenance of database, then this can be done by stopping the HTTP server or by stopping the EPG.

  I hope it is clear now.

  André

• How to start and stop two parallel loops?

  Hello

  I want to control two parallel loops with different timing in a vi. Second, it means that to start the loop 1, roll 2, stop 1 or 2 restart loop 1...

  But if loop 1 turns that I can't start looping two then reverse.

  Can someone help me and show what is bad in my example?

  Thank you

  Christian

  Hello Christian,.

  The reason why you can't do what you want is actually quite simple.

  You have an external loop which is 'on' the two inner loops.

  So when you stop one of the inner loops, the outer loop will still be in the same iteration until the other inner loop ends - stop the other inner loop.

  You can see very easily if you explore the outer loop iteration count - only when both loops internal, it is incerment.

  So, to do what you want, you need to make them independent - you need two external loops.

  Check my attachtment, see if that's what you need.

  Hope this helps,

  Paulo

• How to start and stop the video capture in a state machine

  Hello

  I am a student of neuroscience and this is what I try to do: 1) trigger a camera to GigE (200 FPS), 2) start the video capture, 3) triggers a light that stays on for x milliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve at the same time and 5) stop the video capture 1 second after 4). For this, my VI is a state machine, with a State for each trigger (ex, 1 State for trigger camera 1 State of light of trigger, ect) and a statement to "stop" and a "time-out State." Everything worked except the video acquisition - the program could trigger the camera but only acquire a frame, because it was not running in a while loop and this is my first question: for an acquisition video is it always necessary to have a while loop?
  I guess the answer is Yes, so I built a loop of 'consumer' for the camera. A queue of the pre-trial 'trigger camera' in the loop of producer, I was then able to start the video capture, but now the problem is to stop it at the right time. I have an another queue in the State of 'stop' in the loop of the producer, but is not able to start the State 'stop' in the loop of consumer, I think that maybe it's because the loop of consumer gets "stuck" in the whole loop.

  I hope you can help me, the VI is attached. Thank you!

  Hello

  First of all, in your loop producer: STATE 'Stop', you use the flushing line, then there is no need to use 'item queue at the opposite end. You can use the enqueue function.

  Secondly, you said "I moved the command stop inside the while loop as you said, but it did not work. But if you look closely, you moved "Enqueue function" inside the while loop. Instead you should use Dequeue function. Please, look at the picture I posted an orderly manner.

  And remove the circled (i.e. function. Enqueue function loop of consumption, where I wrote 'Why stop here').

  Try now.

• How to start and stop the timer by using the keyboard.

  Hello, I would really like to help please, I have

  here to launch a program whereby I press a key

  which starts the timer and press another button to stop the timer, the

  delay is displayed and used to move an object on the phase on the delay dependant.

  Thank you

  Attach a listener of events on the stage of your film.

  stage... addEventListener (KeyboardEvent.KEY_DOWN, keyDownHandler);

  According to the http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/events/KeyboardEvent.html# KEY_DOWN

  1 if you want any key, so you don't need a key code.

  var myKeyBoolean = false;

  function keyDownHandler(event:KeyboardEvent) {}

  if(myKeyBoolean == false) {}

  start my Countdown

  } else {}

  Cancel and reset my timer

  }

  }

  2. If you want the same key to both use a Boolean value like this:

  var myKeyBoolean = false;

  function keyDownHandler(event:KeyboardEvent) {}

  if(Event.keycode == MyKey) {}

  if(myKeyBoolean == false) {}

  start my Countdown

  } else {}

  Cancel and reset my timer

  }

  }

  }

  3. If you want two different keys

  function keyDownHandler(event:KeyboardEvent) {}

  if(Event.keycode == myStartKey) {}

  start my Countdown

  } Else if (event.keyCode == myStopKey) {}

  Cancel and reset my timer

  }

  }

  }

• Start and stop the movie with the key

  Can someone tell me please how to do this?

  I am very new to Flash.

  Thank you

  Place this code in the script you are trying to control - pressing a key will be play/stop depending on what mode it is in.

  Stop();

  var isPlaying:Boolean = false;

  stage.addEventListener (KeyboardEvent.KEY_UP, keyUsed);

  function keyUsed(event:KeyboardEvent)
  {
  If (isPlaying) {}
  Stop();
  } else {}
  Play();
  }
   
  isPlaying =! isPlaying;
  }

  If you have any other questions, try to anticipate what you might be asked and include details.

• I want cRIO to start and stop the acquisition by push physical button on the cRIO, is this possible?

  When you use my cRIO 9024 on the ground, I prefer to be able to start and stop the acquisition with pressing a physical button on cRIO.

  I want to say I don't want it to be "as a start-up," I don't want cRIO to start the acquisition as soon as the power supply is ensured.

  Is this possible?

  Hi Cashany,

  you will surely find this switch status. But there are easier ways (but more expensive) for a button. Fiddling with a pen or a small screwdriver to switch USER1 is not what I call "user friendly"...

  -You have at least 2 voltage inputs on your module available. Use a switch voltage on the power inputs. Use a 'real' button!

  -You have an available serial port. You can set some pins on GND or voltage and check their status inside the cRIO/RT target...

• Order /sequence to start and stop services in Version 11.1.2.

  Hi all
  
  
  
  Need to know the steps / order/sequence in which the 11.1.2 should be started and stopped.
  
  
  Hyperion Essbase, planning, and reporting tools
  
  OS - 2008 64 bit.
  
  
  If someone like automated how to start and stop it please share how do?
  
  
  Thanks in advance
  
  regds
  RAM

  Here is the official order:-http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install/ch06s02.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Satellite A200-1FL: cooler starts and stops every minute only with battery

  Hello.

  I just bought an A200-1FL and I test these days. I noticed that the cooler starts and stops every minute about when I use it only with the battery.

  Disconnected from the power, even if I do not have too much, just browse the Internet. Is this normal?

  If I work with trendy food, the cooler makes no noise.

  Thank you.

  David

  Hello David

  Do you also have it tested with different profiles in power options (balanced, power saver, high performance)?

• Digital start and stop trigger with restart HW

  Hello

  I am trying to write a program that reads continually samples based on the rise and fall of a digital triggering.  I want the measure to start on the front of the trigger and stop on the falling edge of the trigger.  I want the data that are read to be preserved and then added with the next set of data that the trigger rises again.  I have read the tutorial "Digital start and stop trigger" and can use the reference to stop the measurement process and I looked at the example "Acq & chart voltage - Int Clk - HW Trig restarts ' that comes with LabVIEW and I can get the two of them working separately with my request.  I'm quite confused however try to put the two together (see attachment).

  If I put a "Start.vi" icon inside the while loop then I get an error "you can do this while the measure is still ongoing".  If I put it out of the loop and then the process only runs once.  I tried to put a loop structure case for restart only if necessary, but this has produced another error which the source escapes me.  Is there a standard way to do this and if so someone can point me in the direction of an example?

  See you soon,.

  Glen

  I think that in this situation, it would be preferable to use a Pause trigger.  You can use the break to stop the acquisition when the trigger was low and start when the trigger is high.  In this way, served only for the duration of your trigger pulse.  I've attached a screenshot of a VI that illustrates this principle in action.

• How to stop the EN icon appear in Windows 7 Pro to start and stop

  I have a language loaded on my computer.  Whenever the computer starts and stops at the icon IN displayed on the screen.  I looked in the obvious places like Start > Control Panel > clock, language and region, for a possible solution for this turn.  The language toolbar is turned off and is not reduced to a minimum or displayed anywhere.

  How can I prevent the EN icon appears?

  Thanks Omnicore you snapped.

  I don't know if that has an effect, but under keyboards, I got two installed?  The keyboard for the United States and the other for the United Kingdom.  I deleted the one for US as I am in England, applies the settings and rebooted the system.  The stop screen does not display the icon of EN, but on the home screen icon EN reappeared.

  So I applied the settings of copy on the administration tab, and after the system restarts, it erased the EN icon on hospitality and the stop of the screens.

  I appreciate you taking the time and allows you to reconfigure your computer to solve this problem for me.

• Can you start and stop the glassfish server in JDeveloper 12 c and how?

  Mr President.

  Can you start and stop the glassfish server in JDeveloper 12 c and how?

  Concerning

  have you looked at

  http://www.Java-n-me.com/2014/02/GlassFish-extension-for-JDeveloper-12C-go-live.html

• PowerCLI defining politics NTP to "Start and stop with the host" in ESXi 5

  Would appreciate any help in the definition of the strategy NTP on ESXi 5 hosts 'start and stop with the host. My script is currently using the following:

  Get-VMHost MyEsx | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-policy "automatic."

  This sets up the NTP service in "start automatically if all ports are open and stop when all ports are closed.

  "When I cange to 'MyEsx Get-VMHost | Get-VMHostService | where {$_.} Key - eq 'ntpd'} | Game-VMHostService-political ' market / stop with host"" the following is returned:

  «The possible enumeration values are "auto, On, Off«»»»

  Anyone know of a way (in PowerCLI) of the set up for the 'start and stop with host?

  OK, then you should choose politics "on".

  These are the policy values and what they match.

  

  Like this

  Get-VMHost MyEsx | Get-VMHostService | where {$_.Key -eq "ntpd"} | Set-VMHostService -Policy On
  

• Need help with keyframes for start and stop an effect

  I use a mask and blurred for a few seconds. I understand that I must use keyframes to indicate when to start and stop this effect in the video, so that the same area is not trimmed for video full.

  The problem is, I can't find help by correctly setting the keyframes. When I opened the menu keyframes in the effect, it seems that I must together for both the mask took and the blur effect. I did... to start and stop at specific times, but the rest indeed throughout the video, so of course miss me something by using keyframes. The manual to create effects is not useful. I need assistance with keyframes as what I'm doing is clearly not working. Help!

  If the mask does not move that you don't have to set the keyframe. For the blur, click the stopwatch next to 'bluriness' add keyframes as below, the Reds don't blur and blue those maximum blur this fade effect.