Start icons all be changed and used by default

Similar Questions

• the wireless network icon is suddenly changed and I do not now see my signal strength

  the wireless network icon is suddenly changed and I do not now see my signal strength... What do I do to fix this... ?

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also try temporarily disabling computer security software and check.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• How can know you if someone has consulted and used the default Administrator account in Vista?

  I was not aware that the default Administrator account is so easily accessible if there is no password on it. In my view, a standard user has accessed this and it seems that the computer is having a lot of problems now. Is there a way to tell? Needless to say I care that much personal info could acceded as well as commercial information.  Security, 3 administartors (users) appears in some of the boxes, and I only know 2 of them, myself and the default admin?  I'm a recruit of the computer and the other person is somewhat a geek so I could really use some help. I am the system administrator, but don't really know what to look for. I would really appreciate if some wiz could help me.

  Thank you

  Hello

  You can't find if someone has consulted and used the default Administrator account in Vista. You will need to set up a password so that no one will be able to access the admin account.

• I can't find the start icon to restart anywhere and it used to be here.

  Used to be in the lower left corner of the start icon and also a menu to the sidebar with start option to the right of the screen.

  8.1 Windows startup icon is hidden?

  If the area of Firefox toolbar does not appear, Firefox may be full-screen mode. The F11 key toggles between normal display and full-screen.

  If the Firefox toolbar is visible, but the Firefox window is too large and does not block the Windows task bar, you can try to resize the Firefox window. Press Alt + space to display the ' in control ' of the Firefox window, then click on size or type s, tap the arrow down on the keyboard, then press the up arrow button repeatedly until you see the task bar, and then press ENTER.

  Who help me?

• Gwetting a list of all virtual machines and used space

  
  I apologize for my very basic question.

  I need to make a file (better if an Excel file) with a list of all virtual machines in a simple 5.x vSphere infrastructure including 2 VMare ESXi 5.x servers and the disk space used (allocated, used) of each virtual computer.

  The easiest way seems to list the virtual machines from the vSphere client and export the list as a .xls file.

  It seems simple, but when I look at the file I see a lot of missing VMs or a large number of missing values for several virtual machines (just the Runts).

  Is this a problem with my vSphere client?

  I tried to create a PowerCli script using the "Get - VM|" Select-object Name"command, but my limited skills will let me extract the value of the used space.»

  Can someone please provide a sample of PowerCli I can just copy and use?

  Is there another way to get the information I need?

  Concerning

  Marius

  .

  Not knowing that if you have configured a cluster or just stand-alone hosts, here is one simple line...

  Get-VMHost-name | get - vm | select name, usedspaceGB

  From there, you can make formatting, get total usage etc.

• Menu start a username like mine and a Public default - is a problem of security and safety?

  I want to secure my PC as much as possible. I had a pirate that I had to pay an expert to check out it. Now, I try to learn more about my PC. When I go to the System Configuration and then tap tools and then look in system information and then expand software environment and click program groups - I see not what follows, and I want to know if the - access Public is correct and what is it? And it is a threat to security?

  My Start Menu has a Public Start Menu name and a user name Public as he looks and a "defect".

  Start a Public programs: programs on the Start Menu
  Public's early Menu\Program\Accessories: Star Menu\Program accessories
  There is a Menu\Programs\Administrator Public: start

  Now; I have mine listed as well and also a 'default', I need to fix this? If I please give me instructions step by step. Thank you

  ' p

  Hello coldtoes10 a welcome to the forum of Microsoft.

  It doesn't matter its content in your menus, but if you want to be sure it's something I can do

  one of the following will improve your security greatly,

  First off get your firewall in bulk to the top ethical hackers are paid to hack to help you improve your security

  Ethical Hacker

  never do anything on an open wy - fy. buy a router, when you configure the network goto this site and create a network password

  http://www.random.org/passwords/

  30 digits should do

  15chiffres of computer passwords, 45 figures to break is almost impossible

  10 digits for all online accounts

  then on the Internet, don't spread your IP instead use Tor navigation Pack your completely anonymous being online

  then read a ton of books on security Internet here are just a couple

  COMPUTER security for Dummies

  Computer security handbook

  If you want to be proud look high-tech in your firewall, Spike

  {note: spike is notorious of very effective malicious code entering your firewall}

  Good luck

• Is it possible to buy a subscription for all adobe programs and use it on different computers?

  If I buy the complete package off adobe cc it costs me 60.49 euros per month. My question is, if I buy this subscription, if I can use all the programs on different computers with the same adobe ID. I have my laptop, my mums computer and my dads, and I want to use my programs on all computers. Is this possible or do I have to buy 3 subscriptions for each computer that will be cool me much... ? And is it possible to work in the same programs on different computers at the same time? I want to know this before I spent so much money because I really need these programs for my work...

  IRIS Vergnes

  Hi,

  CC Adobe license can be activated on 2 machines using the same Adobe ID.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

• OfficeJet 4622-E All In One and using Windows 8

  I bought the HP officejet 4622-E in 2012. My warranty has expired.  At that time, I was working with Windows XP.  Now, I have a new laptop which uses Windows 8 as the operating system.  I tried to use the installation disc, but I was told that my computer was not compatible.  I am able to print documents manually or by using the "print key" on Word and other programs like Quicken, but I am not able to do much about elce.  My S/N is {deleted personal information}, the product number is CZ294A. I hope you can help me.

  Hi, here is the link for the HP Windows 8 driver.

  Just download and install.

• MAIL - ignore 'Message Font' change and returns by default

  If anyone else here is having a problem where if you replace him do 'Message' by default Helvetica to something else, and he returns with each reboot, the solution is simple. For me, it was happening on my Mac Pro, but my MacBook Pro was very good.

  Go to ~/Library/Preferences and remove com.apple.mail - shared.plist

  OK, scratch that. It did not work.

  I also deleted the file com.apple.mail.plist in ~/Library/Containers/com.apple.mail/Data/Library/Preferences/ without result. After a reboot, it is by default in Helvetica.

  All ideas are welcome!

• T410S frezze problem. (I read all related to theme and using latest drivers)

  Hi all, I bought a new T410s in Lenovo U.S. online store in January 2011.

  T410s 2901 CTO

  i5 560M

  4G of RAM * 1 (by myself added an another 4G)

  Intel SSD 160G

  Switchable GPU / Intel HD + NVS3100M

  Multi touch screen

  Gobi2000 3G WWAN card.

  Intel 6200 AGN WIFI card.

  OS: Windows 7 x 64

  configuration of base as above.

  I have a problem of frezze despaired of the T410S.  It's totally random. When it's happened, everything is frezzed and the computer is totally dead.

  I read the related topics in this forum, my T410s overheat issue, when it is using integrated graphics, the CPU card

  temperature is about 50 c/122 ° f, the fan speed is about 3000.

  I also installed last site of form lenovo drivers and BIOS of the machine is v1.41.

  I tried:

  Remove the 4G memory that added by myself.   -No effect

  Disable switchable graphics card BIOS.  -No effect

  help ~ please ~  BCZ it's a new machine, I won't ask for lenovo to replace the motherboard.

  Any suggestions?

  I have one of these T410s. He did action gel several times last December. What I did I thought he was the pilot chart + audio driver, because when sometimes a film/youtube is played, it freezes.

  I did download the relevant drivers from the Intel Web site. Then use the device drivers to uninstall lenovo those. Reboot, it will show a screen very ugly as the default resolution of window 7 is low res. find intel drivers and install it, reboot.

  If that fails, uninstall the audio driver and use the default window 7 (from windows update).

• Get all the layers and apply to other documents

  Hello everyone,

  I'm copying all layers from one document to the other. But just copy paste is not enough for several reasons (root document may already be closed, copy at a time when the new document is not open yet,...).

  This means that I have to remember all the layers and use them later.

  At the moment I am sth. Like this:

  ---------------------------------------------------------------------------------------

  public static std::vector < PIActionDescriptor > layeractions;

  Sub testGet()

  {

  Result PIActionDescriptor = NULL;

  numLayers Int32;

  SPErr error = kSPNoError;

  DescriptorTypeID typeID = 0;

  Int32 docCounter = 1;

  error = PIUGetInfoByIndex (docCounter,

  classDocument,

  keyNumberOfLayers,

  & numLayers,

  (NULL);

  If (numLayers > 0)

  for (int32 layCounter = 1;

  layCounter < = numLayers & & error == kSPNoError;

  layCounter ++)

  {

  error = PIUGetInfoByIndexIndex (layCounter,

  docCounter,

  classLayer,

  classDocument,

  0,

  and result,

  (NULL);

  layeractions.push_back (result);

  }

  }

  Sub testSet()

  {

  SPErr error = kSPNoError;

  Result PIActionDescriptor = NULL;

  for (auto & it: layeractions)

  {

  error = sPSActionControl-> Play (& result, eventMake, he, NULL);

  }

  }

  ---------------------------------------------------------------------------------------

  So what I'm doing, open a doc with some layers. Then testGet(), open new document then testSet().

  But bench always puts "the command 'Make' is not currently available." and error = - 128.

  Hope you get what I'm trying.

  Thanks for any thoughts!

  Who's going to be a difficult path to travel to this topic. Even if you can get all the properties of the active document and the layers within the document, you have not dealt with pixels on a normal layer data. You will need to save this broad as well. And for dynamic objects and linked smart objects... you have a job to do. Any topic of a document is not capable 'get '.

  Trying to cope with this: "document might already be narrow" would be almost impossible IMO.

  Remember, the source document, which is now closed I now want to copy. Then you can do:

  1. open closed source document. (Or make it more if it is already open)

  2. for each layer in the source document

  a. Select the layer

  b. copy of the document target

  3. close source document.

  The Get accessor routines are not for 'read' directly. You must get the interesting bits of information on and then use the game code that you found using listener.

• All my icons have changed and my programs don't show up on the Start button

  All my icons changed, and my programs don't show up on the start buttonessing. Why?

  Original title: programs do not show

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  To better understand the issue, answer the following questions.

   

  You did changes to the computer before the show?

  You can perform the methods suggested below and check if they will help you solve the problem.

   

  Method 1:

  Step 1: check the feature Safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in safe mode, try to perform a clean boot by using step 2.

   

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Run the tool (SFC.exe) System File Checker and check if it helps.

  Follow the shape of measures the following link: http://support.Microsoft.com/kb/929833

  Method 3: Run the system restore.

  Restore the computer to the date where it worked very well: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

   

  If the problem persists, or if you want more help answer we are happy to help you.

• Try to use my arrow keys to go to an icon on my desktop, and all I get is nothing.

  I am running xp pro and it works on a dell computer. whenever I try to use my arrows to go to an icon on my desktop all I get is nothing.

  now I can use my mouse and click on them and then get the arrow keys to work but not the origin of the proscess.

  But as I said, if I just click on one icon click and turn it on, then I can move around the office with my arrows.

  I can also bring up the start menu and the arrow keys are working on it? Yes it is strange... but if I close the menu then the arrow keys won't work

  on the items on the desktop. Window Eyes 7.5 also used as my screen reader as well. I turned it off and it makes no difference.

  It's driving me crazy! Connect to a blindman please!

  OK, here's a stupid question for you guys. I can not get my office works > what should a blind man?

  Hello

  • What were the changes made before the issue started?

  I suggest you to refer to this method:

  Method:

  I suggest you to check the safe mode issue.

  Here is the link:

  http://support.Microsoft.com/kb/315222

  If it works in safe mode, I would say lets you perform the cleanup start and check.

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Association__Unable of loading Windows files: for example; "vlc. INK." invalid file.__All because my desktop icons have changes and all end. Insread of INK. EXE?

  When I go to open an application, I get a message that says "" could not load (any program I'm opening).»» Invalid file of INK. always comes to the top.
  I double click on an icon on the desktop, and a box pops up saying
  ' file: vlc.exe (for example.).
  To open this file, windows needs to know what kind of program has created. Windows can go online to look it up automatically, or you can manually select from a list of programs on your computer.
  Then it gives me an option to use the web to find the appropriate program, or to select the program from a list.

  Every time I try to look for an application to open it, or search for an anti virus or a fix it patch to solve the problem, I get a windows Explorer page saying "Windows file Association.
  Windows has the following information about this type of file. This page will help you find the software needed to open your file.

  File type: unknown

  Description: Windows does not recognize this file type.

  You can search the following website for more information and related software: web search
  ---------------------------------------------
  I do nothing, can solve the problem, I tried to restart at an earlier date to work on the pc, but I had fixed some time back, there is no date of previous work before this? Can someone plese help, I'm at my wits end... Thanks in advance

  Hey all, I met several times before - bit of a design on a flaw in Microsoft if you ask me.  If that's what I think is, you set all files with the extension ".lnk" to start with vlc.exe (or another program).  In short, here's what you need to do, but be careful in the registry.

  Do exactly what the instructions, exactly how they say to do it, and if something seems wrong, get the help of a technician or someone more experienced.  Make a mistake in the registry can make your system unbootable more or less well.

  1. Click on theStart Menu, typeregedit in start search and pressENTER .
  2. Navigate to the following registry branch:

  NtVersion ntVersion\Explorer\FileExts\ [ext]

  Replace the [ext] with the real extension of the file you want to restore the file type association to return to the original Windows 7 by default (probably .lnk). If you unsure, simply browse through all the Sub-touche under FileExts .

  1. Delete the subkey namedUserChoice .
  2. Exit the registry editor.

  As much as I would like to take credit for the difficulty, I can't - search this Web site for the theme "icons of Application and extension changed. LNK ".  'MyronH' is the host that the application of origin.

  To the extent where the fix proposed by spankydoggy...  Although the intention seems authentic, notice are a bit dodgy.  Considering of Manhood and the stealth technology in about 800 000 permutationsknown to modern virii / Trojans / malware, the only safe course of action is to back up your data and rebuild your system.  And that says nothing about the relevance of the instructions spankydoggy offers in relation toyour system (operating system, applications, recorded files, etc..).  Follow the advice of spankydoggy if you want, but 10 years experience suspect at best it's going to do nothing and lead you into a dead end and the worst cases - it could make your system unbootable or losing data.

  Best regards and good luck,

  Andrew Vliet from Vlietwerkz Inc.

• Computer starts normally but the desktop icons/Dowes/all are unclickable and cannot do something with them?

  My brother has recently installed FireFox on its Windows XP (the only recent change on this laptop). Last night my mother crashed the computer (the only thing she did apparently was click on volume control panel too often making it appear several times, and then go away, she then tried to open the shortcut on the desktop "internet explore", who then tried to load FireFox instead, as it has become the default value). From there on, the computer did not respond, and I could not close normally, so I had put out of service. Today, we have tried several times to use this laptop, but although it loads normally and the Mouse/touchpad moves correctly, we cannot click on any icons or the dowes or whatever it is is completely insensitive.

  Could someone tell me what to do?

  Ok

  Yes, it's more than enough RAM.

  Boot mode safe again and check all entries in msconfig to see from evry time you start.

  Start/run and type

  Msconfig

  Ok

  Startup tab

  Keep the page open, then click on the link below with your other machine. It will tell you what are all the entries and see if you can disable them or not. It will also identify malicious programs.  Turn off everything that is not necessary to run at startup

  http://www.SysInfo.org/StartupList.php

  Read the key at the top of page. Use the search box to check all your entries

  When you restart, you will get a message saying that you have begun in "Selective startup" click "don't show this message again" and then click OK

  Also check if there is a yellow speckles in Device Manager

  Right click on my computer/properties/hardware/Manager

  .