T410S frezze problem. (I read all related to theme and using latest drivers)

Similar Questions

• Is there a better way to remove the toolbar "Frequently used tools" (which I've never used!) to open whenever I open Acrobat reader. rather than uninstall Acrobat and use another PDF reader?

  Is there a better way to eliminate the "frequently used tools.
  toolbar (which I've never used!) to open whenever I open Acrobat
  drive. rather than uninstall Acrobat and use another PDF reader?

  Hi jg49392310,

  You can disable the tool pane with Adobe Acrobat Reader DC was last updated, see this note cover hide the tools Panel in Acrobat and Acrobat Reader DC at all times.

  Kind regards

  Nicos

• E1000 2.1 and the xbox live NAT problem (I read all the others)

  So like everyone, im having troublewith xbox live and NAT, but I feel my situation of dns is unique, so my solution is perhaps just as well. Help, please

  Modem-> Router (e1000)-> port 1 (wired): xbox, wireless: mac computer

  Configuration: Auto DHCP

  MTU: tried 1365 and 1452, currently on 1452

  UPnP: off

  NAT: on

  Port Range Forwarding - (tried reccomendations cisco and xbox, tried the verses of individual ports this range, currently at)

  (looked in the outbreak, but as I have 2 devices, if I let a range of open ports, I want that it does match the xbox)

  Application: xbox

  Start port: 53

  End port: 3074

  Protocol: the two

  IP address: 192.168.1.20

  Xbox is set to:

  IP: 192.168.1.20

  Subnet mask: 255.255.255.0

  Gateway: 192.168.1.1

  DNS: automatic

  reading only 1 dns (see notes)

  Notes:

  router port range is 100-149, so DHCP should not be a problem (I guess) if ip xbox is put out of reach ([192.168.1.20] being 20)

  In my status tab in the router, it gives me only a dns. When I look at online modem, it gives 2 different DNS.

  Each time, I have everything works a turn at a time, the computer always connects, Xbox Live still connects, but he still has the problem of nat.

  I don't think it's a matter of double nat, bc when I look at the stats of my modem there is nowhere to configure ports (seems to be the modem only 1 Ethernet only)

  Also, I noticed that the mtu of my modem is 1500 (I changed the mtu on the router, but not the mtu of my modem [it only allows me to change the mtu of my modem])

  Help, please. I've been dealing with it and try different combinations of ports and options for 4-5 hours now. I'm starting to crack: S :).

  Well, I found my own solution.  I looked at all options as what could be easier for the components to deal with.  Here's what worked:

  Computer:

  Configuration: Auto DHCP

  MTU: 1452

  UPnP: on

  NAT: on

  DMZ:

  Source: 192.168.1.100 to 100

  Destination: 192.168.1.1

  Xbox:

  I could leave it on auto dhcp mac address book bc but it looks like this:

  IP:192.168.1.100

  Subnet mask: 255.255.255.0

  Gateway: 192.168.1.1

  DNS: automatic

  Combined with a DHCP reservation [via the mac address (for the safety of the DMZ)] all of it worked.  With a DMZ, I didn't have to worry about which ports where correct.  It was just messy because I was 2 devices of connection and could not choose a single static ip address. So, the example ip ending (20) was not default range of the router of 50 numbers. Pay attention to your range of ip addresses in the router settings.

  * Make sure that your DMZ is on only a single or a partition of ip addresses, and you have other DHCP reservations for these ip addresses * you can find the mac address for xbox by accessing the network > configure network > additional settings > click Advanced settings, and not choose a 'different address', you should see a below *.

• No VISA Read reading all the bytes available and ordered

  Hi all

  I use Write.vi VISA and VISA Read.vi to send and receive packets of bytes to and from a processor.  Generally, everything works fine.  I put a loop repeats until he sees at least 20 bytes to the port, then I VISA Read to read 20 bytes.   However, when I receive some packets of bytes, my property node indicates 20 bytes to the port, I ask VISA Read to read 20 bytes, but it reads 13 bytes and leaves seven bytes to the port.  If I run the read operation again, it will read their remaining 13 bytes.

  Any ideas on what might materialize this project?

  Thank you

  Forbes

  OK, I thought about it.  I put 'Stop character activate' in 'VISA configure Serial Port' to 'False', and all my problems disappeared.

  It's fun to talk to myself.

  See you soon,.

  Forbes

• CD/DVD drive reads all formats of DVD and regions

  Hello
  My Teac-dw-224th-a bed not all formats DVD and regions.
  It reads CD but not DVD at all.
  No DVD - R and DVD not yet regular. I checked the DVD region.
  I reinstalled the driver and also tried with different software.
  What can I do?
  Help, please!

  Hello

  It is possible that your DVD drive incorrect region settings.
  In this case, it is not able to watch all possible movies to DVD from different regions.
  Of course, you can change the settings for 4 times. But after this change, the parameters have been set and it is not possible to change more.

• Presario S6500NX (early 2000 XP system) - PROBLEM of READER of CD/DVD-RW and SON INTERNS

  Hello

  Hoping someone can provide assistance.

  Long ago, I put a cd very scratched into my dvd/cd-rw drive (Philips DVD 8301). The car tried to read, but could not. Can I have heard a strange noise in the process. After this incident, the drive would no longer turn entirely to allow playback of a media. I would like to see the green light go off/on power and hear start intermittently before it would stop completely. It is in my system, no error message about the drive and my software seems to be up-to-date. Think you that needs replaced or is training - it something else? Anticipate, I could swap out, I opened the tower and found two connections, labelled P4 and P8, loose. Don't know if this could have something to do with him or if the wires are supposed to not be connected. If the wires are supposed to not be connected, I wonder what they are for.

  Thank you for your understanding.

  Mark

  The problem with optical drives is that the laser errors are not reported to Windows.  If a laser fails, Windows will have no way of knowing this.  At this point, it seems not be a failure of the driver somewhere between the laser and the player interface.  Device Manager is usually a good place to look for errors indicating a material error, but it is not a definitive source to identify hardware problems.  When it comes to optical drives, Device Manager is ideal for checking the system detects it and if there may be a driver or registry problem.  Since it seems in good condition, which excludes a driver or registry problem and leaves only the material aspect of it.

  I agree with wb2001 that the best option at this point is to replace the drive itself.  It could be a replacement.  Amazon is not the only source, so don't forget to check around online to see what's out there.  If you use eBay, be sure to check the ratings.

  Another option would be to replace the drive with a SATA drive, which will give you more drives to the choice, because the motherboard has SATA ports.

  

  SATA connectors are located close to the VIA VT8237 chip.  If the power supply has a power cord SATA, pictured below, you could move to a DVD SATA drive instead.  IDE is not so common more with the advent of SATA connections.  Even if the power is not a SATA power connector, there are ways around that.

  

  You will need a few things to accomplish this task:

  1. a SATA like this one.  Make sure that the drive is a standard size rather than a thin/thin.

  2. If the power supply does not have a SATA power connector, you will need a molex to SATA converter like this one.  A SATA power connector is typically a black connector wider and flatter and would replace the molex power connector to the drive.

  3. If the DVD player is not come with one, you also have a SATA cable like this one.  Most DVD players tend to come with one, be sure to check features.  This would replace the wide ribbon cable, connect the drive to the motherboard.

  Let me know if this has answered your questions.

• How to clear all of a TX and use a user name?

  I just got a used TX. It has all the old info on it and of course the user name. I want to install my medical software etc and get rid of everything on the TX. I changed my username on the desktop with the Palm software, but it retains charge the information that was on the TX to the TX when I do a hard reset and it keeps using the ID of the person that I bought the TX of. I want to erase everything and start over. I'm still having a time difficult everything out of my Mac.

  Any ideas? Thank you. John

  Hello and welcome to the forums of Palm.

  Here are the instructions that you need to perform a hard reset on your palm, which will erase all the information.

  A hard reset is done by holding down the power button sticking something thin (your pen, paper clip) to the rear reset the hole of the device. Keep your hand on the power button while you release the paper clip in the reset hole. The display now shows "Palm Powered." Release the power button. Now, you will see a screen in 5 languages and invite you to erase all data from the Palm. Screen says "erase all data?" Yes - go to top, no - down"and you click on the arrow pointing upwards (Silver button on the browser of 5 channels on the lower part of the Palm). This erases all the info from your device.

  Message relates to: None

• Searchbar broken in v23 and problem with add - js related?

  Since the upgrade to v23, the search bar not working - I can enter search terms, but the menu drop-down appears on my second monitor, and pressing on enter, nothing happens - that is the search for the search bar no longer works, for any search engine installed.

  Also, even if it may seem unrelated question, I use the Devonthink added, in order to capture pages html since firefox directly to Devonthink Pro. After the capture of the page HTML in PAO, I can only convert a searchable PDF.
  Converting page captured from v23, in PAO, all I get is a reflection and a partial screenshot of the visible part of the original HTML page.

  These two functions worked perfectly in v22, but are broken to v23. I have since downgraded in v22, and both functions work as expected, so it is clearly a problem with Firefox v23.

  The only 'fixes' were either downgrade v22, or start with a new profile, v23.
  The search bar worked normally when booting in safemode, v23, but not when all THE modules, themes and extensions have been disabled.

  Whatever changes have been made in v23, required a new profile to 'fix' this problem.

  Again, reinstall all the extensions and try to put the same preferences is a way very frustrating to mitigate this kind of behavior of the software.

  Fortunately, it is often not necessary.

• I tried to convert doc to the pds.  He converted all the files in you folder to the pds.  The problem is that I can't open any files without buying adobe.   I can't unconvert so now I can't read all the files?

  I tried to convert doc to the pds.  He converted all the files in you folder to the pds.  The problem is that I can't open any files without buying adobe.   I can't unconvert so now I can't read all the files?

  Hi chrism43238735,

  May I know the process to convert Doc to PDF files. If you use Acrobat to convert the files, and then with the same application you open.

  If you used another process, in this case try using the Adobe Acrobat Reader application. Adobe - Adobe Acrobat Reader DC Distribution

  Thank you

  Abhishek

• P12 creation problems (read all previous discussions and watched all the videos of youtube)

  Hello

  I am trying to solve a problem of p12 on Windows. I myself create a key as it shows in the video tutorial on youtube. I then turn my developer_identity in a .pem I then try to export in a p12 and I get an error saying that my key is not a password. Why this keep happening and what can do to solve? I created a p12 on a mac, but it does not work when I try to use it on a PC.

  I solved this problem by deleting all the files on a macintosh computer and then redo them via openssl. I cancelled my developer_identity file I made on a mac and do a new via openssl.  Once I did that it worked perfectly. Have access to a mac once in a while, but the development on a PC can be a major issue.

• Visa reading reads all bytes to the port

  I have a camera that I communicate via the Serial Port. I have a standard communications protocol. For a particular command, I know that the exact number of bytes expected in return. I send my order. I see the correct number and exepcted to bytes in the port. I then read the number of bytes in the port. However, the VISA read returns only the first two bytes.

  I contacted success with this camera and this Protocol for more than 130 commands unique and different. There are only about 6 orders in which the read visa does not read all the bytes in the port. Anyone know why that would happen?  I expect to see 6 bytes. I see 6 bytes. I have visa read the command with 6 bytes. The visa read returns only the first 2 bytes. It's very very frustrating. I can do this exact process even with a different command. I expect 45 bytes of this command. I see 45 bytes with this command and I read 45 bytes with this command.

  I don't think that it is device connected as I can converse with success with the same camera on the same computer with the same cable of connector using non-LabView. It seems to be a problem strictly related to labview and VISA read the order. If someone could help that would be greatly apprecicated.

  Thank you.

  What is the exact byte stream that await you in return with this command?

  Instead of opening VISA, use the configuration Serial Port VI.  In this way, you can override the default values.  It looks that your instrument using all the defaults VISA of speed in baud rate, start and stop bits, etc.  However, in the VISA software, there is a failure to use a termination character, and this character is 10 (0x0A).  If you use the configure Serial Port, you can tell the pilot VISA do not use the stop character.

• Equium P200 - DVD drive reads all discs

  My DVD player just started reading some disks and not others, as some records are not read all the time, you can put a disk in, click on the dvd drive and it will open the player and say insert a disc, the device manager says device working properly and up to date driver.

  Does anyone know what is the problem?

  How understanding your problem if you have written on some and other disks?
  Can you explain what it more detailed?

• Camileo S20 - How to read all recorded videos?

  Hi all!

  Ive has had not long ago the camileo s20, so always try to get mt mind around it. I think that Ive managed the basics but im having a problem with the game back.

  When I recorded a video - 6 minutes long, but I stop recording half back way through, then go to start recording where I left, while playing back it will play the movie sepratlely and manually I have to start the other half of the video to play.

  Is there anyway I can just click play and it plays all my videos continuously? a play all the setting?

  Thank you

  Hi wayne_1,

  First of all, I can recommend consulted the user manual. It contains a lot of information on your camera and how to use all the features.

  I checked the user manual, but unfortunately I think that such a reading function isn't available. With the play button, you can switch to playback mode and use the left and right button to go to the next picture/movie.

  But there is no function on playback of videos.

• Problem with read/write satellite U400 - 12 p PSU40E DVD on LG GSA-U10N

  Hello again,

  Another serious problem is the LG GSA-U10N DVD combo drive that comes with mine U400. For some reason he has serious problems with reading and writing to DVD. Doesn't depend on whether the media is expensive or cheap. It seems to read and write all the CD very well, however.

  I would like to avoid leaving service point (can take up to 3 weeks or more), because I need this laptop all the time.

  Is there anything we can do about it?

  My system - Vista Home Premium 32 bit has been restored to factory default and then fully update the site of microsoft, outside pilots. In addition, no other movements driver update has been made. It's just that you want it to be.

  Greetings

  > Doesn't depend on whether the media is expensive or cheap.
  Not really

  My notebooks drive can handle a lot of different CD and DVD from different manufacturers, there are cheaper and more expensive DVDs.

  I had a good experience with TDK DVD-R discs. In most cases, the burning procedure could be completed successfully
  But I had some problems with the other DVD writing.

  I think the whole issue is compatibility between the laser lens and DVD-surface and that's why I recommend you several DVDs from different manufacturers.

  Goodbye & good luck

• Re: My Satellite A200 - 28 p has stopped reading all DVD and CD

  Hello

  My Satellite a200 - 28 p used to read CDs and DVDs, but all of a sudden does not recognize cd or recordable cd brand he does not even recognize the recovery disc came with my laptop.

  I only got November laptop of Dixon's so ask why I'm having this problem when it is relatively new. It is a hardware problem software? All patches, easy?

  When I insert the disk and go to my computer it does not there be a disc in the drive of dvd - rw at all. When I double click on the dvd - rw drive, the Player automatically opens and I am asked to insert a disk, even if there is already in the drive.

  Help! : o).

  Hello!

  I agree with Akuma. Try removing the upper and lower filters that is also described in this paper to Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  If it doesn't work try to boot from a bootable CD or DVD. So you can make sure if it s a software or hardware problem.

  Good bye