Start-MGR missing again!

Similar Questions

• Error starting problems to drive solid state "Boot MGR missing - Press Ctrl + Alt + Delete to reset"

  OT: Solid State Drive startup problems.

  Hello

  I recently bought a Samsung 120 GB 840 Evo Series SSD to start my operating system and general programs faster than my current hard drive. I want to keep my hard drive 2 TB of storage mass (videos, music etc...) but I want to migrate my OS on my SSD. I copied my Program Files x 86 for my SSD and I went into the BIOS and set my boot option #1 and #1 Boot priority to my SSD, however, after I save and exit the BIOS, I'm greeted by the message "Boot MGR missing - Press Ctrl + Alt + Delete to reset" and now I don't know what to do.

  Any advice would be great!

  Kind regards

  Tommy

  How to pass Windows 7 to a larger hard drive to a smaller SSD drive using Acronis True Image:
  http://www.PAGESTART.com/win7sddatihim05011201.html

  (This is an extreme example that the SSD is only 32 GB in size, but the technique is the same).

  How to move Windows 8 to a HDD to SSD (concept is the same for Windows 7)
  using Acronis True Image 2013 or 2014
  http://www.PAGESTART.com/win8atihddssd07241401.html

  J W Stuart: http://www.pagestart.com

• My computer lag / freezes for a few seconds then starts to work again and get pop ups, I have never before.

  For example, while I am typing my computer freezes for a few seconds and I can't type or will not move the mouse. This lasts a few seconds but then starts to work again ok. This happens on every 10 minutes or so... enough to get on my nerves, especially at the time of the school. How can I fix? I also get a pop-up whenever I go to a new page. How can I stop this as well? I'd be so grateful for any help on this matter.

  Thanks, Elsie

  Hello

  What the popup say or lead?

  Search for malware, and then run the cleaning as described below.

  --------------------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I leave my computer for 10-20 minutes it stops itself and I have to go and start it up again.

  Original title: My computer turns off too soon. How can I change this.

  When I leave my computer for 10-20 minutes it stops itself and I have to go and start it up again. It's very frustrating. I want him to stay that I can continue to run a program that converts formats. When she stops formatting stops. How can I change the system to keep it set.

   

  Hello

  1. what operating system is installed on the computer?
  2. didn't it closes completely down or will he sleep?
  3 did you changes to the computer before the show?

  It could be due to food or an electrical problem in the PC.

  Method 1: Open the troubleshooter of power
  http://Windows.Microsoft.com/is-is/Windows7/open-the-power-Troubleshooter

  Method 2:
  Step 1: Check the Safe Mode issue.

  Reference:

  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If step 1 work, try step 2

  Step 2:

  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 3: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

• I have my ID Windows Live ID have not used for quite awhile and I would like to start using it again, the live ID is always committed, however I don't remember the password

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  original title: can reactivate you my windows Live ID?

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  It is a peer-to-peer (user forum.  You don't talk to Microsoft directly.  The answerto your question is, "No."

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

• Windows server 2008 boot mgr missing

  window Server 2008 boot mgr missing

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.
  
  Thank you,

• When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  I think that there is a prob with this game, it does not matter if you use firefox or IE. Or another browser. It blocks something. Or causes probs.

  FB needs to fix it. There are a lot of people (in a Google search), who are having probs. One way or the other

• Can I install a new edition of retail XP on an existing OEM edition or what I need to reformat and start all over again?

  Original title: Windows XP

  Can I install a new edition of retail XP on an existing OEM edition or what I need to reformat and start all over again?

  Hi billavery,

  1. which type of installation do you want?
  2. is it repair install or clean install?

  Yes, you can install the retail version of XP on an existing OEM edition.
  See perform a repair Installation
  See How to install or upgrade to Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Videos will play for a few seconds and start the buffering again.

  Buffering

  When I go to watch videos like on MSN or MSNBC buffer? Then play for a few seconds and start

  buffering again. Other Web sites that I can watch the video, but most of the videos to start the buffering. I run Windows Vista.

  Y at - it a cure?

  Thank you-Richard

  When I go to watch videos like on MSN or MSNBC buffer? Then play for a few seconds and start

  buffering again. Other Web sites that I can watch the video, but most of the videos to start the buffering. I run Windows Vista.

  Y at - it a cure?

  Thank you-Richard

  You download the video more slowly as you watch it. So when he says "buffering", he expects to catch up and download what you are willing to watch next.

  This type of internet connection do you have? Dialup? DSL? Cable? Whatever it is, it's too slow for what you do, or do you have some problem that it slows down.

• "Error system, the program cannot start because missing d3dx9_43.dll.

  Original title: error

  So I built a new computer and I was about to play my favorite game, legends, League then suddenly a message said, "an unknown DirectX error occurred and league of legends cannot start. Please make sure that your video card is to use the latest video drivers from the manufacturer. Know the name of my graphics card, ASUS GEFORCE GTX970, I went to their website and downloaded their latest driver. but who did not work, just made another pop up message that says: "system error, the program cannot start because missing d3dx9_43.dll.

  I tried several methods, but many of them do not work and I really need help to solve this problem. Now when I try both messages are in pop up. be really annoyed, I tried another game, Counter Strike Global Offensive, it's the same thing, he has done it before, but it doesn't have a pop-up, it just does not open.

  "I have tried several methods, but many of them do not work.

  This does not tell us what you tried, so I'll start at the top.

  d3d9_43.dll is one of the 'new' DX files, and you have a fresh install of Win7, you need to update DirectX

  (even if the "latest" DX files come from 2010).

  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  DX files can be damaged. In this case you can remove the suspicious file in System32 and sysWOW64 and run the Web Installer to replace this file or reinstall all files DX using the full DirectX Redist (June 2010), which will overwrite all DX files (Web Installer does not overwrite existing files).

  The second option is often necessary because you don't always get a specific file mentioned in the error.

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  .

• Qosmio F10 does not start system missing or damaged

  I have a Qosmio F10, and I use all the proper procedures for RECOVERY DVD-ROM PROUDCT.

  "I did all the necessary readers updates as well, but when I turn on the laptop came with an error message:" \WINDOWS\SYSTEM32\CONFIG\SYSTEM
  "Windows was not start because the following file is missing or damaged:

  So, now my computer with startup options start, but what that you choose the system starts again and again...

  What to do? Please, I beg you.

  Hmmm usually after using the CD recovery Toshiba, everything should work ok.
  I read on some computer expert sites that this problem could be linked to the hardware failure. The HARD drive or the module memory is possibly corrupt.

  I would first recommend formatting the entire HARD drive (remove also all partitions).
  Install the operating system again.
  If it does not solve this problem you could check if it is possible to install from the original CD of Microsoft XP.
  Further, you can see the memory modules. Try to remove one and use only one or replace it with a new one.

  But please note that these are just my suggestions and I m not 100% sure if these proposals will allow you to solve problems. In any case it s worth a try

• Boot MGR missing, Windows Vista,

  Hey! so I have a Lenovo that runs on windows vista, and it had this nasty virus that I could only remove by resetting my computer back to factory settings (I saved most of my personal files) and if that wasn't bad enough, when I tried to restart my computer it says "Boot MGR is missing, press Ctrl alt delete to restart ' does NOT incidentally , so long story short, to fix it, I need to use the windows vista disc to repair the file, but I don't have the disc, but I have the key phrase that sits on the bottom of my computer when I bought it, so any suggestions regarding How can I come on a windows vista disc or download windows vista so I can burn it to a disc? preference for free because I already OWN Windows Vista?

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer/laptop there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Blue screen - ntoskrnl.exe was able to start: kernel missing/corrupted dxgkrnl.sys

  original title: BSOD and freezes, several errors reported, puzzled.

  Hello

  I've been struggling with trying to understand an intermittent problem for the last 3 weeks.  The problem has been around for one more month, but it seems to happen more and more often can't find the source.  I wish I could attach the dump files memory here, but don't see any option for this.  So here it goes...

  Have had this computer for 2-3 years and have not changed the material at all and only the drivers updated.

  CPU: Intel Core i7 CPU * address email is removed from the privacy *.

  Motherboard: ACPI x 64

  PowerSource: Power TX 750W.

  2 Hardrives: WDC - WD6401AALS-00L3B2 ATA

  6 GB OF RAM

  Graphics card: NVIDIA GeForce GTX 260

  I have wiped the two HD, reinstalled Vista.  I've updated the Vista completely.  I've updated the following drivers to their latest: graphics card, motherboard, map its (motherboard), LAN (motherboard).

  The computer crashes more often that the BSOD appears.  When it freezes, the sound plays all that was the last one on again and again and nothing does.  No data memory is dumped to the crash.  I checked with another computer that is on the network to see if she could still access shared files and that he could not.  It has frozen or gave the BSOD when just doing electronic-mail/surf net or playing dungeons and Online (DDO dragons).

  Challenges in a relationship with install/updates: SP2 would not install through normal updating, so a download and install manually.  DDO requires NET framework 1.1 to run.  Had to integrate the installation so that it can install.  Do not remember having to do in the past.  The point of freezing/BSOD is always the same before and after I did the complete wipe.

  Made the following stress tests:

  Don't use memtest 86 + (2.11 and version 4.10) x no errors, 8 longer past track.

  Used Furmark 1.8.2 V max stress test, ran all night without crashing.

  Used Video Card Stability Test (Group in stone), no problem.

  Used Seagate Diagnostics on HD, long and short no trials, no failure.

  Reported on BSOD errors:

  Ntoskrnl.exe could not start: missing/corrupted core

  dxgkrnl.sys

  driver_IRQL_NOT_LESS_OR_EQUAL nvlddmkm.sys

  More information on these if necessary.

  I get about 5 freezes with no info to each BSOD with info.  Very hard to debug with any info.

  I've had freezes/BSOD occur minutes after the computer starts and the hours.  Have the box to open with an external fan blowing into the case.  Don't think overheating is the problem.  No overclocking ever carried out on the system.

  I'm relearning all debugging stuff, did not have to do this in a long time any help would be very appreciated.

  Thanks in advance for your help.

  Hello

  If you do not remove ANY power and reconnect the cables (at both ends, memory and cards)
  When possible) - in fact, remove and replace - do not just tight.

  As you re-installed Vista twice the question must be something that works with a low level
  as the BIOS, chipset of low level drivers or hardware.

  You can validate files minidumps on the SkyDrive or other file sharing sites so that they can be
  downloaded, and we will have a look. But to be honest they will reveal probably material
  or worth nothing useful, so.

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -----------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Boot Mgr missing. How should I do?

  Hello:

  Boot Mgr is missing on my Emachine T5254. After not being able to

  Windows Vista Home Premium 32-bit with SP1 to work, I installed ubuntu.com & it works. How to reinstall Vista & remove Ubuntu?

  Thank you.

  Phil Morey

  E-mail address is removed from the privacy *.

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Firefox blocks the entire system, then everything starts to run again

  As above. Began to occur since v20 came out. Looks like a lot of people have this error.

  Revenue to v19. Problems occurs as well.

  Tried everything (from FF in safe mode, create a new profile, reset FF, uninstall and a new installation, start in Windows safe mode). Nothing seems to work.

  It freezes again and again, only to resume normal service only to freeze up again. On and so forth. Really frustrating.

  Can someone point to me if this FF problem or is there a problem with my system itself?

  My system does not appear to freeze when FF is not running though.