Start Motorola services & question with the Lolipop

Similar Questions

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BITS service fails with the error code 193: 0xc1

  Program update of Microsoft with Vista SP 2 is a failure with error code 80246008.  Looking at the forum it was suggested that the BITS service does not work so I check this service and it is not executed.  When I try to start it, it fails with the error message 193: 0xc1.

  The only suggestion I have for this fix is to reinstall Vista.  It is probably not necessary?

  Hello

  I suggest you follow the steps mentioned in the article below.

  You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start the Background Intelligent Transfer Service

  http://support.Microsoft.com/kb/916251

  If this does not help then I suggest you to download the update that is mentioned in the link given below and install it on the system.

  Update for Windows Vista (KB960568)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=d7ae9660-BB13-4F0C-816b-85de3980ec1b&displaylang=en

  Click the link below for more information about the Windows Update error.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  http://support.Microsoft.com/kb/956706

  Windows Update error 80246008

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  I tried all listed in other postings, but our VSphere 4 server resides on a SQL server server.

  I tested the connection odbc with the SA password and it works, it rebooted several times now, tried to stop all services and bringing up one at a time, but whenever a dependency is not. I get this error in the system log, the VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  And

  VMware VirtualCenter Management Web Services service depends on the VMware VirtualCenter Server service which failed to start because of the following error:

  The service has returned a service-specific error code.

  Application log says this

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  I don't know how to fix it. It was working fine yesterday. Nothing has changed. Or has anyone experience this problem and have a solution?

  see if that helps

  http://KB.VMware.com/kb/1015101

• How to start my subscription abroad with the foreign language and writing unknown?

  How to start my subscription abroad with the foreign language and writing unknown?

  These can also be useful:

  FAQ: Is creative cloud available in my country?

  FAQ: Why my purchase showing the wrong currency?

  FAQ: How can I view Adobe web pages in another language?

  FAQ: How can I change the country associated with my Adobe ID?

  FAQ: How can I change the language that appears in my creative cloud app?

• Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

  Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

  There are dozens of discussions in this forum that describe the fix

• VCenter Server service stopped with the error service special 2 (0x2)

  Hello

  I installed vCenter Server 2.5 5 update on the WIN2003 SP2 server, but after reboot I get this error:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7024

  Date: 25.09.2009

  Time: 09:19:43

  User: n/a

  Computer: VCSERVER

  Description:

  The VMware VirtualCenter Server service stopped with the error service special 2 (0x2).

  and I can't connect using VMware Infrastructure Client.

  Follow the pdf file and you will be fine.

• Disable "start a new process with the data of this task.

  Hi all

  As the title says, I would like to disable "start a new process with the data of this task.

  Because I find that it will not work with form preparation process has data, I understand that you can fix by some changes to the procedure of data preparation, but I don't have time at the moment.

  Here is the screenshot to show what is a function 'Start a new process with this task data' in the workspace.

  

  Concerning

  Bill

  I think your only option is to customize the Worksapce interface.

  I'm sorry.

  Jasmine

• 64 bit Vista crashes when the system goes into Sleep Mode. Have cold start. Simultaneous began with the June 8 patches.

  This problem started a week ago, say at the time of the June 8 fix release. I think the relevant in case the log message is 'detected bad event COM + a system code back during internal processing. HRESULT is C 8007043 line 45 of d:\longhorn\com\Complus\src\events\tier1\eventssystemobj.epp. Error report, please contact Ms Product Support Services. "However, when I contacted MS, they would not help without paying the fees because it was an OEM installation. The system remains upward after the stabilization of the system going on in SafeMode after cold start, close and then switch to normal mode. However, once launched, it seem (ed) as the hard drive light was permanently. I did a restore to June 8, most early I could continue.  The hard drive worked without interruption after that.  I did a forced sleep and restart and the system froze again. With this in mind, I wonder if .NET patches that were released were running somehow at the time of sleep and that he could not recover.  OR, during sleep, the system was made of updates and the system has been disabled, corrupting the updates.  I looked at the Windows Update settings and it has been set to automatically install updates.  It is quite possible that the user did not know and did not recognize there are pending updates.  Maybe updates were not correctly packed in order to manage a system from going into Sleep Mode, while they were installing. In any case, any who would provide help on how to identify the problem and fix it.  There may be registry entries need to be corrected?

  Duane G. Leet, Ph. d. 45 years of experience in technology

  Microsoft support has provided a solution.  Here is the procedure:
   
  We can run reset Windows Update Tool and system update tool to detect incorrect manifests, files or data from the registry. Please follow the steps below.
   
  Step 1: Launch the tool to reset Windows Update and the update of the system tool
  ====================================
  1 download and run reset Windows Update Tool from the link below:
   
  http://go.Microsoft.com/?linkid=9665683
   
  2 download and run the update tool of the system from the link below depending on the Type of system:
   
  Update for Windows Vista 32-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b4d90b06-c27d-4483-bc1f-04d43fa7b293&displaylang=en
   
  Update for Windows Vista 64-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f6f353c0-d00e-43e7-97EF-0feefc7ff064&displaylang=en
   
  Note: It may take an hour or more time to detect and replace the erroneous data, please be patient. When it is finished, restart the computer and reinstall Windows Vista SP2.
   
  If Windows Vista SP2 can not always be installed, I suggest to download the stand-alone Installer and install it in clean boot Mode.
   
  Step 2: Download the installer of Windows Vista SP2 Standalone
  ===========================================
  1 download the installer of Windows Vista SP2 Standalone from the link below depending on the Type of system:
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 32 bit (KB948465) (475,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d&displaylang=en
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 64 bit (KB948465) (745,2 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3&displaylang=en
   
   
  Step 3: Install Windows Vista SP2 in clean boot Mode
  =========================================
  Please disable all startup items and services of third parties at boot to avoid conflict when installing Windows Vista SP2.
   
  1. click on 'Start', type: MSCONFIG in the search box and press ENTER.
   
  Note: Click 'Continue' if the "User Account Control" window appears.
   
  2. click on 'Services', check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).
  3. click on 'Start', click 'Disable all', click 'OK' and restart the computer.
   
  Note: Disable temporarily the startup group only prevents the start up programs from loading at startup. This should not affect the system or other programs. We can manually run these programs later.
   
  4. double-click the downloaded standalone installer and follow the instructions to install Windows Vista SP2.
   
  To restore the computer to a Normal startup, repeat step 1 above. Then click "Normal startup" in the general tab, click on "OK" and restart the computer.
   
  If there are any questions or concerns, feel free to let me know. It is my pleasure to be useful.

  +++++++++++++++++++++++++++++++++++++++
  The cause was not determined, but evidence tends to a disturbance in the download or installation process, with one of the errors in the event log is an error in checksum on one of the modules. With a large file, 745 meg, the mean time to failure on a LAN network is probably shorter than the download time.  The installation process was probably longer than the time that the system has increased...  Corrective actions for Microsoft could include more small download / install, not allowing an automatic installation for automatic download over a certain size, or deal with the best controls during installation to intercept the checksum error.  Duane G. Leet, Ph. d. 45 years of experience in technology

• Automatic start of VM:s with the option disabled after crash

  4 guests lost their power and when she came back and the hosts started the auto started vm:s. Without auto-start has been configured. How could this happen, something new in esxi 5? My only explanation is that HA has started virtual machines, but I did not now why...

  With the help of Duncan, my theory is confirmed

  See his blog on this here

  This cannot be prevented and is just how HA, unless you disable HA

  I think it's a good feature

  So my recommendation if you want more control on the virtual machine startup.

  1 set the priorities of start correct HA for your virtual machines

  2. If you have many questions of power, set the hosts do not to start after power failure. (storage as well)

  In this way, you can manually start the guests once the power problem has been resolved, but it is more a question of infrastructure.

  I can only imagine what would happen if the power goes down every 5 minutes, especially with your storage space

  Please allow points to useful/correct answers

• I can't find the start page in Firefox with the Set Up synchronization link

  I try to get the synchronization on my android device code find all my favorites on my main computer to the tablet-PC. The directions on the Mozilla support site say "Type set up button on the start page for Firefox Firefox Sync." Well I can not for life on my find this button or start page for Firefox. Or perhaps is it? My tablet pc, when you use Firefox, does not all of this page with the said button.

  Firefox for Android the Sync promotion has been removed. You will need to use the button 3 or button menu device > select settings > sync

• All-in-One C200 / Win7 allways starts in VGASave mode with the NVIDIA drivers installed

  Hello

  I have a problem with a C200 all-in-One (my mother-in-law). Allways Windows 7 starts in VGASave (vga driver regular) mode, but the NVIDIA ION drivers are correctly installed. Device Manager displays the NVIDIA graphics card and drivers installed. It says device is fully functional. I tried several different versions of the NVIDIA driver. The one on the CD drivers, two different from the Lenovo Web site, one that comes with the last windows update and later from NVIDIA. Always the same.

  I googled for hours, but found no resolution. Is it possible that the vga driver is set somewhere in the system to be still used, even if the other drivers of work are present (force vga)? This could be a hardware problem? Any other ideas?

  Thanks for any help!

  Best regards

  Helmut

  Hello

  Now, I solved the problem. I learned on the net that the C200 all-in-One does not use the NVIDEA graphics card normally. If the integrated Intel graphics card was the problem. The new Intel driver that came with the last Windows Update does not work with the C200. Simply, I installed an earlier version of the Intel driver from lenovo site. Windows now runs the Intel driver correctly. But I have not so far if you never use the NVIDEA, and if it works then.

  Concerning

  Helmut

• Problem phone Motorola q synchronization with the computer

  My computer synchronizes with the Motorola Q phone, the computer is old and the phone is old window XP is outdated more some of my programs are missing also, as help and support center is it too late or there at - it some 4 HELP me? /// ...........

  your phone manual says that it syncs with windows XP?
  Have you installed the phones for this software?
  What happens when you try?
  Are you activsync installed Microsoft?

• AutoDeploy question with the new deployrule

  Hello

  I wan´t to create a new configuration of autodeploy in my test environment. To do this, I use the latest version of vsphere 6 and last power cli version 6.3 release1.

  Following orders which help to create a rule to deploy this automatic add a host to the cluster named "cluster."

  First, add the filing of software

  Add esxsoftwaredepot 'path to the zip file.

  new-esximageprofile - cloneprofile ESXi - 6.0.0 - 20160302001 - standard - name Nested

  This is where the question pops up.

  New-deployrule-name 'test' - point 'Nested', cluster - model "ipv4 = 192.168.1.50"»

  I get the following error message

  

  If I did the same thing with powercli version 6.0 Release 3, the problem does not occur. There is a problem with the 'cluster' point in the command.

  Anyone who would confirm?

  Frank

  Hi Jim,.

  When we create a New DeployRule, we provide objects that contain the values for the switch "Item" (or directly the name of the element, literally).

  This means that below PowerCLI command must work.

  example: new-DeployRule-name - point $img, $hp, $cluster - AllHosts

  In the example above,.

  1) $img is the variable that contains the value of the profile Image. We can create this variable by-' "$img = Get-EsxImageProfile-name ".

  2) $hp is the variable which keeps the value of the host profile. We can create this variable by-' "$hp = Get-VMHostProfile-name ".

  3) $cluster is the variable that has a value of Cluster folder or data center. We can create this variable by-' "$cluster = Get-Cluster-name ".

  It works well with PowerCLI 6.3 Release 1 as well.

  Avinash-

• Customer Web couldn't connect to VMware Lookup Service error with the old server DNS name

  Hello

  I had a Vcenter server named virtualcenter.domain.com (192.168.1.10) with Vcenter 5.1 (with SSO, inventory, Webclient) on a windows 2008 R2 with a MSSQL2012 db.

  I tried to upgrade from 5.1 to 5.5u1 and he failed, Vcenter & Webclient installers have been crashing before you finish update

  So I decided to make a clone of my Vcenter and still have my production work while trying to update.

  My clone has been virtualcenter2.domain.com with a new IP 192.168.1.12

  I uninstalled everything for the webclient service that I had to clean files and registry entries manually, because he didn't find the uninstall program when I was clicking on uninstall.

  Then the installation went well, everything except the webclient service works very well

  When you try to connect to the new vcenter: https://virtualcenter2.domain.com:9443 / vsphere client / I got:
  

  Unable to connect to the VMware Research Service https://VirtualCenter.domain.com:7444/lookupservice/sdk -The SSL certificate verification failed.

  Why the error message is wearing the old DNS name?

  And why when installing, the webclient service to connect to the search service perfectly and then it doesn't work?

  After 1 day, uninstall/reinstall/install, try SSL things and many things, that I found online, the solution is the STUPIDEST thing ever.
  WHY DON'T C:\ProgramData\VMware\ls_url.txt USE VMWARE to provide the URL of the LookupService for the Webclient service? During the installation provide you the URL for registration with SSO, why the hell isn't it written that URL somewhere and use it after?

  And why the hell with all the gel/reinstalling ALL THE COMPONTENT of the Vcenter, I did, this MUTE txt file has not been updated with the new DNS name of my server?

  In any case, my webclient is currently working, but 1 day of work and mental torture do not understand why the hell my client was not working due to a file text fucking, it's depressing.