Disable "start a new process with the data of this task.

Similar Questions

• PCIe ASPM is disabled "by reason of incompatibility with the hardware on this computer"

  My desktop computer running Windows 7 Professional x 64. As far as I can tell, my computer has no trouble mode sleep (S3) and no trouble waking from sleep mode. My power settings work very well, as far as I know.

  Nevertheless, my Windows 7 'Power report' shows the following "error":

  PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer.

  In my view, that it is PCIe link state power management.

  Considering that this computer is almost new, with no changes made to the original material, and that Dell is not likely to include material "known incompatibility" in its systems, can I just ignore this "error?

  If there is someone at Microsoft who really knows what the "known incompatibility", they aren't saying.

  After the search the Web site of Microsoft and the Web for an answer and finding none, I came to the conclusion that it is one of these incomprehensible Windows messages that Microsoft is trying to ignore ("...") consult your manufacturer for assistance... ") and nobody else can understand.

  Fortunately for me, my computer goes in and wakes from hybrid sleep without a problem, despite the "known incompatibility" that nobody at Microsoft.

• Get the new laptop with the data from the old laptop

  My laptop was stolen. :-(

  However, I made frequent use the software recovery and used my external hard USB drive for that matter.

  Now I'm about to buy a new laptop... probably a new ThinkPad (which would also depend on this issue).

  Can I use recovery software restore feature to retrieve my stolen laptop data and copy it to the new machine? If so, how? I've never had to restore anything, so I don't know options, features, etc., given by lenovo recovery software.

  Please let me know as soon as possible. As I said, there's going to be an effect on the laptop that I will buy in the next few days.

  See you soon,.

  Audiodroid

  
  

• When I search something, firefox opens a new tab with the results. How can I change the settings to where it will stay all in the same tab?

  When I search something Firefox automatically opens a new tab with the results of this research. How can I change the settings to where the results will appear in the same tab where I made the research?

  If you want to open search results in a new window most often is a parameter of the search engine you use.

• Cannot start a new conversation with relay of sms on the Mac or iPad.

  Very strange problem and I have tried seemingly everything. SMS relay works fine on all my Apple devices. I can send and receive messages either SMS or iMessage. However, I can't start a NEW conversation with relay. I can only answer to the conversations that are already started. (does not matter if I started or the other party)

  When I want to send texts to my boyfriend who doesn't have an active conversation in the list of messages I have to text him to my main iPhone (that the relay is activated on) and after that the convo appears right in messages on mac, the other my iPhone and my iPad, and I can continue to send messages from any device.

  I tried to close off the coast of relay and allows once again. Restart the phone. Restart the mac. Disabling iMessage on the iPhone. Ensure that all devices are on the same wifi network. A lot of things that shouldn't matter...

  A few tips here after a reset of the iPhone?

  Also note that my iPhone is running iOS 10 beta 2 now, BUT I had this problem for some time. Long before I had the beta version.

  Well, that's disappointing...

• Server data store will automatically get updated when the new file (with the same name) is placed in the landing area

  
  Hi guys,.

  The data store server-side will get automatically updated when a new file with the same name is loaded in the landing area?

  for example

  1 data store created for server-side get the file named UK.xls (he has 5 rows)

  2 snapshot created for the above data store

  3. created with the snapshot process

  After that if I remove 2 lines from the same file and load again to the landing (with the same name). So by re-running the process will take the last file OR do I need to reload the file in the data store every time when there is a change in the file. We also tried with option to work but the last file was not picking up.

  Any help will be really appreciated.

  Please lets us know your updates.

  Please advice

  Thank you

  VT

  Hello

  When you create a snapshot, you create a snapshot whose task (provided that you use a data store server-side) can be run from a job. To refresh the data, run the snapshot in a job task. If you create a task at the time the snapshot and the processes that use it, they will automatically connect and will be 'upstream' data through the snapshot in the process. You can then choose whether it would be appropriate to write the snapshot or not (for the effectiveness of performance if you want to do the straight through processing) by activating or deactivating the bucket of data staged that the snapshot written to. The snapshot in the work task means that the data is refreshed.

  For the work of design to the Director, you can refresh the snapshot by running again it manually in the context menu.

  Kind regards

  Mike

• I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost.

  original title: robocopy

  I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I bought a latitude d530 use. It came with Windows 7. Site Web of Dell initially said vista wit came. It is no longer start. Error says check the data cable

  I bought a latitude d530 use. It came with Windows 7. Site Web of Dell initially said vista wit came. It is no longer start. Error says check the data cable. Sometimes, reinstall drive. I do not have the windows CD. Can I download the original Windows on android phone and the transfer

  You can download and create a bootable copy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?tab=question&status=unanswered

  then

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• do all updates to date and new features with the plan of photography?

  It's a little unclear to me if this is the case.

  Hello

  Yes absolutely, you get all the updates and new features with the plan of photography.

  You'll have to use lightroom as well as photoshop.

  Reference:-Creative Cloud price and membership plans | Adobe Creative Cloud

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• Measures with the date Conference

  Hello

  I have to make an application, as part of my end of study project, which allows to calculate heat flow. Pour this, I have data measured with thermocouples. These data are stored on a data recorder that record these data on a .txt, .xls or .csv file (it is to be chosen by user).

  I'm not very chiseled with LabVIEW.

  In a Prime Minister, I tried to read the .txt file data. I can read the 1st line as I wish but not others.

  So I decided to work with a .xls file. The temperatures Conference goes smoothly. For time is the date, it's more complicated. Indeed, I would like to USE date and time corresponding to each measure to plot a graph XY with the date and time X and Y the temperature of the thermocouple.

  Kind regards

  Here's an example (VI from LV2011 but attached VI en LV2010) made on the basis of your code. Comment by watch it extract the news date and time of the string and generate the the from graph XY time in seconds in X. realized very quickly, it is without doubt room for improvement but you will serve as a basis for work at least.

  

  To define 'Structure box' serving at first as far as being 0 and calculate relative time to the following samples. Thus the x-axis of the graph starts at 0.

  My time is short, I renounce other comments but I happy to answer specific questions.

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Defining the new path for the data files for restoring using the VALUE of NEWNAME FOR DATABASE

  Version: 11.2.0.3 Linux
  
  Today, I had to do a restore RMAN to a new server and I came across the post following RTO on the VALUE of NEWNAME FOR DATABASE
  
  ALTER database open resetlogs upgraded;         error to throw
  
  So, I thought to use it to indicate the new location of the data files to restore.
  
  That's what I did
  ===================
  
  Restore the control file and catalog items to backup using the command of CATALOGUE START WITH. Then I started the restoration

  $ rman target / cmdfile=restore.txt
  
  Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:40:41 2012
  
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: SPIKEY (DBID=2576163333, not open)
  
  RMAN> run
  2>  {
  3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey';
  4>  restore database  ;
  5>  }
  6>
  7>
  8>
  executing command: SET NEWNAME
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of set command at 07/26/2012 04:40:43
  RMAN-06970: NEWNAME '/fnup/hwrc/oradata/spikey' for database must include %f or %U format
  
  Recovery Manager complete.

  Don't know how it worked for Levi without %f or %U. So, I added %f
  

   $ vi restore.txt
   $ cat restore.txt
  run
   {
   SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
   restore database  ;
   }
  
  
   $ rman target / cmdfile=restore.txt
  
  Recovery Manager: Release 11.2.0.3.0 - Production on Thu Jul 26 04:45:45 2012
  
  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: SPIKEY (DBID=2576163333, not open)
  
  RMAN> run
  2>  {
  3>  SET NEWNAME FOR DATABASE TO '/fnup/hwrc/oradata/spikey/%f';
  4>  restore database  ;
  5>  }
  6>
  7>
  8>
  executing command: SET NEWNAME
  
  Starting restore at 26-JUL-12
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=19 device type=DISK
  
  channel ORA_DISK_1: starting datafile backup set restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  channel ORA_DISK_1: restoring datafile 00001 to /fnup/hwrc/oradata/spikey/1
  channel ORA_DISK_1: restoring datafile 00002 to /fnup/hwrc/oradata/spikey/2
  channel ORA_DISK_1: restoring datafile 00003 to /fnup/hwrc/oradata/spikey/3
  channel ORA_DISK_1: restoring datafile 00004 to /fnup/hwrc/oradata/spikey/4
  channel ORA_DISK_1: restoring datafile 00005 to /fnup/hwrc/oradata/spikey/5
  channel ORA_DISK_1: restoring datafile 00006 to /fnup/hwrc/oradata/spikey/6
  channel ORA_DISK_1: restoring datafile 00007 to /fnup/hwrc/oradata/spikey/7
  channel ORA_DISK_1: restoring datafile 00008 to /fnup/hwrc/oradata/spikey/8
  channel ORA_DISK_1: restoring datafile 00009 to /fnup/hwrc/oradata/spikey/9
  channel ORA_DISK_1: reading from backup piece /u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
  channel ORA_DISK_1: errors found reading piece handle=/u07/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk
  channel ORA_DISK_1: failover to piece handle=/u07/dump/bkpfolder/SPIKEY_full_01nh0028_1_1_20120725.rmbk tag=SPIKEY_FULL
  channel ORA_DISK_1: restored backup piece 1
  channel ORA_DISK_1: restore complete, elapsed time: 00:01:56
  Finished restore at 26-JUL-12
  
  Recovery Manager complete.

  As you can see, RMAN restore data files to the desired location. But the data file names ended up as

  1
  2
  3
  .
  .      
  .
  9

  !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -----------| Holy Cow |-----------------------------
  
  
  So I had to rename each file as below
  

  $ mv 1 /fnup/hwrc/oradata/spikey/system01.dbf
  $ mv 2 /fnup/hwrc/oradata/spikey/sysaux01.dbf
  $ mv 3 /fnup/hwrc/oradata/spikey/undotbs01.dbf

  I would have been better in execution of the order for each data below file

  SET NEWNAME FOR DATAFILE

  Now, I think, there is no advantage in using NEWNAME SET of DATABASE to. Only the disadvantages. I did anything wrong above?

  Martin;

  On the issue of the VALUE of NEWNAME FOR DATABASE, you must specify at least one of the first three of the following substitution variables to avoid collisions of names: %b f % U. see semantic entry for TO 'filename' for a description of the possible substitution variables.

  You use %f

  %b
  
  Specifies the filename without the fully qualified directory path. For example, the datafile name /oradata/prod/financial.dbf is transformed to financial.dbf. This variable enables you to preserve the names of the datafiles while you move them to different directory. During backup, it can be used for the creation of image copies. The variable cannot be used for OMF datafiles or backup sets.
  
  %f
  
  Specifies the absolute file number of the datafile for which the new name is generated. For example, if datafile 2 is duplicated, then %f generates the value 2.
  
  %U
  
  Specifies a system-generated unique filename. The name is in the following format: data-D-%d_id-%I_TS-%N_FNO-%f. The %d variable specifies the database name. For example, a possible name might be data-D-prod_id-22398754_TS-users_FNO-7.
  

  Source - E10643-01

  Backup and recovery reference

  http://docs.Oracle.com/CD/E14072_01/backup.112/e10643/rcmsynta2014.htm

  I see CKPT and I agree on that!

  Best regards

  mseberg

• When you try to start Firefox I get a message saying "a copy of Firefox is already open. Only one copy of Firefox can be open at a time. "I started a new profile, but the Profile Manager always tells me that by default it is still in use.

  When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?

  This has happened

  Just once or twice

  == I thought that I had left Firefox and he was new.

  I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.