Start-ORA-03113 Oracle 11g Win 2003
Hi guys,.Please help I get this error when you try to start the database.
Thank you.
It's really important alert.log read...
your flash_recovery_area is full
ORA-19815: WARNING: db_recovery_file_dest_size of 161061273600 bytes is 100.00% used, and has 0 remaining bytes available
You must purge, follow the recommendation:
You have following choices to free up space from recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Fatal OR connect error 12170 for this problem, you must add in sqlnet.ora "listener diag_adr_enabled = off" and restart the listener
Tags: Database
Similar Questions
-
Hi guys Pls help
Target name = prod
Target = Instance of database Type
Host = db02
Metric = status
Metric value = 0
Timestamp = 11/07/2011 15:38:18 EET
Severity = critical
Message = could not connect to the database instance: ORA-12519: found appropriate TNS:no services Manager (ERROR of DBD: OCIServerAttach).
Notification rule name = availability of data and critical States
Notification rule owner = SYSMAN
Notification Count = 1
Thank you.Did you perform the action specified by the error message?
ORA-12519: Manager TNS:no of appropriate service found
Question: The auditor could not find any available service manager which are suitable for the client connection.
Action: Run "lsnrctl services" to ensure that the authorities have registered with the listener and accept connections.
-
Developer of form for oracle 11g (win)
Hi all, I have worked on oracle 9i and used with the developer 6i. now, I am more civilized :) to oracle 11g (win32_11gR1_database_1013). It is installed properly. now, I need to do some development projects, as I did before. Please guide me what development tool will be ideal for this version of oracle installed and where to can download it. Thanks in advance.kashif_ashfaq wrote:
This link does not work. There is change in the appearance of the oracle site. Please advise according to the new interface.Yes, it's a very confusing page. Here is the translation of this page:
(1) If you want the version 10 gr 2 Developer of forms, find the line that reads "Oracle Developer Suite 10 g (10.1.2.0.2) (including forms and Designer)" and then click on the link "Windows". On the resulting page, accept the agreement and download the two files zip to developers. (I urge you also to read the installation instructions at http://download.oracle.com/docs/cd/B25016_08//doc/dl/core.htm.)
(2) If you want the latest version, click the link that is provided in red and underlined. Scroll down to the part that shows the forms download and download the 4 discs for WIndows. ALSO, make sure that you have the following installed (most of which you get from the same page)
* WebLogic Server
* Deposit creation utility
* Identity management
* Wizard for the SSO metadata repository
* Identity management 10 g 3
* Oracle database(3) you can also get it yourself. Exploration is half the fun in Oracle (and a quite necessary skill). One way possible: follow the bouncing ball
http://OTN.Oracle.com
-> Products (main menu on the left): development tools (link)
-> Traditional tools (Portal Central region): forms (link)
-> Downloads (extra area on the right side): forms (link)When there, read* and follow the instructions carefully.
In addition, you can other research tools. JDeveloper/ADF and Application Express come to mind.
-
Access Enterprise manager - oracle 11g - windows 2003 - Doctor of password
We have windows 2003 server and we run 2 oracle databases
11g version.
We were EM properly configured for a database and when we were
trial for the other databases, we met configuration errors and
We were able to sort by performing a search on "google", the solution was "ocijdbc10".
file must be placed in the bin directory. It worked, but we flew upward
by accessing the EM. It does not accept the sys/pwd as sysdba, which I can
use for the sqlplus session.
Anyone can suggest what would be the cause and the solution or work
This round.
Thank you
PKSSakap,
I'm not sure of the cause of the error. It should work. On Metalink too, there's nothing that I could find on the subject. But a google search, gave to this thread.
http://KR.forums.Oracle.com/forums/thread.jspa?threadID=630058Here, a small workaround is discussed the Sysman password should be the same as Sys and also, he is asked to check that account the Sysman must not be locked. Can you check these options and go back?
HTH
Aman... -
Validation error - 11g Win 2003 backup configuration
Hi guys,.
While the configuration of backups I get this error, but the user is good, what can I do now?
Thank you.
Validation error
Review and correct the following errors, and then try again:
-Error connecting to host dbadmin user failed. ERROR: password and/or user name invalid
Thank you.NDP says:
Hi guys,.While the configuration of backups I get this error, but the user is good, what can I do now?
Thank you.
Validation error
Review and correct the following errors, and then try again:
-Error connecting to host dbadmin user failed. ERROR: password and/or user name invalidThank you.
What is your version of the OS?
If linux and oracle or windows user then go to settings => panel-online administration tools-online local-online possiblity user rights security policy and select create global objects and then add your OS user and try again -
Hi guys,.
I have 2 instances that are running on the basis of 1 data. How can I move between the 2
On solaris, this is what I'll do: export ORACLE_SID = newsid
Set ORACLE_SID = newsid
On Windows what to do?In windows instead of using export use set
for example:
Set ORACLE_SID = orcl
echo % ORACLE_SID %
the second instance:
Set OTRACLE_SID = orcl1
Kind regards
Mohamed -
HI during startup of the database of the following errors is. Please help solve the problem.
SQL > alter database open;
change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.
============================================================
Please see the alerts log entries
--------------------------------------------------------------------------------------------------------------------------------
Commissioning:
Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With the options of partitioning, OLAP, Data Mining and Real Application Testing.
Using parameters in spfile D:\APP\ADMINISTRATOR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEATTNDPRD server-side. ORA
Parameters of the system with default values:
process = 400
sessions = 624
memory_target = 4G
control_files = 'D:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB0M_. CTL.
control_files = 'C:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB13_. CTL.
DB_BLOCK_SIZE = 8192
compatible = "11.2.0.0.0."
log_archive_format = "ARC%S_%R.%T."
db_create_file_dest = 'D:\oracle\oradata. '
db_create_online_log_dest_1 = "D:\oracle\oradata".
db_create_online_log_dest_2 = "C:\oracle\oradata".
db_recovery_file_dest = 'C:\oracle\oradata\flash_area. '
db_recovery_file_dest_size = 8G
undo_tablespace = 'UNDOTBS1.
Remote_login_passwordfile = "EXCLUSIVE."
db_domain = «»
dispatchers = "(PROTOCOL=TCP) (SERVICE = ATTNDPRDXDB)" "
audit_file_dest = "D:\APP\ADMINISTRATOR\ADMIN\ATTNDPRD\ADUMP".
AUDIT_TRAIL = 'DB '.
db_name = "ATTNDPRD".
open_cursors = 300
diagnostic_dest = "D:\APP\ADMINISTRATOR".
Sun 24 May 13:43:09 2015
PMON started with pid = 2, OS id = 5792
Sun 24 May 13:43:09 2015
VKTM started with pid = 3, OS id = 6500 high priority
VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms
Sun 24 May 13:43:09 2015
GEN0 started with pid = 4, OS id = 13072
Sun 24 May 13:43:09 2015
DIAG started with pid = 5, OS id = 1424
Sun 24 May 13:43:09 2015
DBRM started with pid = 6, OS id = 8240
Sun 24 May 13:43:09 2015
PSP0 started with pid = 7, OS id = 2980
Sun 24 May 13:43:09 2015
DIA0 started with pid = 8, OS id = 12956
Sun 24 May 13:43:09 2015
MA started with pid = 9, OS id = 13356
Sun 24 May 13:43:09 2015
DBW0 started with pid = 10, OS id = 14248
Sun 24 May 13:43:09 2015
DBW1 started with pid = 11, OS id = 17900
Sun 24 May 13:43:09 2015
LGWR started with pid = 12, OS id = 5564
Sun 24 May 13:43:09 2015
CKPT started with pid = 13, OS id = 16736
Sun 24 May 13:43:09 2015
SMON started with pid = 14, OS id = 14068
Sun 24 May 13:43:09 2015
RECCE has started with pid = 15, OS id = 16288
Sun 24 May 13:43:09 2015
MMON started with pid = 16, OS id = 10884
commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...
commissioning or shared server 1...
Environment ORACLE_BASE = D:\app\Administrator
Sun 24 May 13:43:09 2015
ALTER DATABASE MOUNT
Sun 24 May 13:43:09 2015
MMNL started with pid = 17, OS id = 16128
Mount of redo thread 1, with mount id 3325657453
Database mounted in exclusive Mode
Disabled lost write protect
Completed: ALTER DATABASE MOUNT
Sun 24 May 13:43:23 2015
change the database open
Sun 24 May 13:43:23 2015
LGWR: FROM PROCESS ARCH
Sun 24 May 13:43:23 2015
Arc0 started with pid = 21, OS id = 10084
Arc0: Started archiving
LGWR: FROM PROCESS ARCH COMPLETE
ARC0: FROM PROCESS ARCH
Sun 24 May 13:43:24 2015
Arc1 started with pid = 22, OS id = 18400
Sun 24 May 13:43:24 2015
ARC2 started with pid = 23, OS id = 17280
Arc1: Started archiving
ARC2: Started archiving
Arc1: become the "no FAL' ARCH
Arc1: become the "no SRL" ARCH
ARC2: Become the heartbeat ARCH
Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:
ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.
************************************************************************
You have choice to free up space in the recovery area:
1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard
then consider changing POLICY of DELETE ARCHIVELOG RMAN.
2 back up files on a tertiary device such as a tape with RMAN
SAFEGUARDING RECOVERY AREA command.
3. Add space drive and increase the db_recovery_file_dest_size setting to
reflect the new space.
4 remove the unnecessary files using the RMAN DELETE command. If a service
the system control has been used to remove the files, and then use the RMAN DUPLICATION and
Commands DELETE has EXPIRED.
************************************************************************
Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:
ORA-19809: limit exceeded for file recovery
ORA-19804: cannot recover disk 44571136 bytes limit 8589934592 space
ARCH: 19809 error creating archive log file to ' C:\ORACLE\ORADATA\FLASH_AREA\ATTNDPRD\ARCHIVELOG\2015_05_24\O1_MF_1_10343_%U_. ARC'
Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:
ORA-16038: log 2 # 10343 sequence can be archived
ORA-19809: limit exceeded for file recovery
ORA-00312: wire 2 1 online journal: ' D:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYD8B_. JOURNAL"
ORA-00312: wire 2 1 online journal: ' C:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYDF6_. JOURNAL"
USER (ospid: 10400): put an end to litigation because of the error 16038
Sun 24 May 13:43:24 2015
ARC3 started with pid = 24, OS id = 2188
Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_arc2_17280.trc file:
ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.
************************************************************************
You have choice to free up space in the recovery area:
1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard
then consider changing POLICY of DELETE ARCHIVELOG RMAN.
2 back up files on a tertiary device such as a tape with RMAN
SAFEGUARDING RECOVERY AREA command.
3. Add space drive and increase the db_recovery_file_dest_size setting to
reflect the new space.
4 remove the unnecessary files using the RMAN DELETE command. If a service
the system control has been used to remove the files, and then use the RMAN DUPLICATION and
Commands DELETE has EXPIRED.
************************************************************************
Instance of stopped by USER, pid = 10400
--------------------------------------------------------------------------------------------------------------------------
Regarding
Ngoyi
Hello
Now it works very well... with following
--------------------------------------------------
using sqlplus
- Startup mount
- ALTER database noarchivelog;
- ALTER database open;
-------------------------------------------------------------------------------
Concerning
Ngoyi
-------------------------------------------------
-
Oracle 10g 32-bit (win 2003) to Oracle 11 g 64-bit (Win 2008)
Hello
I am a beginner on Oracle DB side. I have 2 Windows servers
"Win Server A - current Prod" whose configuration is as follows
O / s: win 2003 R2 sp2 (32-bit o/s)
Oracle DB: 10.2.0.4 32bits
DB Dimensions: 50 GB
NLS_CHARACTERSET: AL32UTF8
"Win Server B - to be new Prod" whose configuration is the following
O / s: win 2008 R2 sp1 (64-bit o/s)
Installation 11.2.0.3 planning software 64-bit db
NLS_CHARACTERSET: AL32UTF8
I need to move/migration/upgrade my db 10g and 11g db on the latest version of win o/s on ServerB.
What are the options I have for db upgrade? After a little research on Google I did, it is what I found
(1) OPTION 1: install 11.2.0.3 software on server B, create empty db, then take datapump exp of patterns non-system (from 10 g) and import it on 11 g
(2) OPTION 2: do something through clone RMAN... not 100% sure how it works and what great advantage I have is going to get compared to OPTION 1
(3) OPTION 3: install 10.2.0.1 on 'ServerB', upgrade to 10.2.0.4 via the Group of hotfixes. Then using the upgrade database Wizard, perform an upgrade of 10.2.04 to 11.2.0.3. I don't know if 10.2.0.4 is compatible with Win 2008 R2 SP1.
Option 3 is seems to be safer and better.
Can someone give me some advice, metalink not. who can put me on the right track. NLS_Characterset remains the same.
Would there be a problem due to the fact that 10g we use is 32 bit and we would go to 64-bit Oracle.
Concerning
LearnerThe simplest option uses the Data Pump utilities.
If your application uses only some of the schema, export/import only those schema.
Please do it on a test first, configuration so that you can test the connection and the behavior of applications.
Thank you.
-
Update 10g R1 WIN 2003 enter (no - asm) 11g R2 WIN 2008 enter ASM
Hello
My line manager initially asked me to investigate this:
upgrade all databases 10g R1 (std) to 11g R1 (std) in win 2003 enter the environment. I tried using VM, no problem.
Line manager back, changed his request:
upgrade all databases 10g R1 (std) to 11g R2 (enter) in win 2008 enter the environment. For more, using a single instance of the DSO. NOT A CLUSTER.
Don't know what to do... my idea was...
Old server - 10g R1; Win 2003
install oracle 11g R2 software
upgrade of databases
New server - 11g R2; Win 2008; Grid
What should I do next?
all comments most welcome...Pump configuration data.
Check first to output dir as data pump always have to run on the server (run as a job) and output must go to a db Server directory.sys@MYDB> select * from dba_directories where directory_name = 'DATA_PUMP_DIR';
If no results or the need to go since you won't need a lot of space for a full dump.
CREATE OR REPLACE DIRECTORY DATA_PUMP_DIR AS '/u01/idontknow/admin/dpdump';
To create a dump to the db from the source I use settings files to run expdp.
for exampleoracle@server~> expdp parfile=expdp-FULL.par
expdp - FULL.par file contains:
USERID=system/yourpwd@YOURSID FULL=Y DIRECTORY=DATA_PUMP_DIR DUMPFILE=YOURSID_20101118_full.dmp LOGFILE=YOURSID_20101118-expdp.log
This file is created on the source system.
I move the dump to DATA_PUMP_DIR desitnation of the server
and using importoracle@server~> impdp parfile=impdp-FULL.par
Impdp settings file is similar
USERID=system/yourpwd@YOURSID FULL=Y DIRECTORY=DATA_PUMP_DIR DUMPFILE=YOURSID_20101118_full.dmp LOGFILE=YOURSID_20101118-impdp.log
You can get help from the settings with
expdp help=y impdp help=y
Good luck!
-
Hello
Background:
We have Oracle 11.1.0.7.0 EE 32-bit on Windows 2003 32-bit EA and now migrated to 64-bit (OS and DB) and everything worked brilliantly ok except...
Problem:
We used to connect to an external application (zip code more than AFD) via extproc to search postal codes / addresses etc. However, after migration, the error:
ORA-06520: PL/SQL: error loading of external library
ORA-06522: could not load the DLL
Configuring listener.ora and tnsnames.ora as exactly the same as what we had on 32-bit machine (with the exception of the host name).
For more convenience, I attached the two here:
Listener.ora (on a 32-bit machine):
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(= Extproc PROGRAM)
(ENVS="EXTPROC_DLLS=C:\Oracle\product\11.1.0\db_1\LIB\pcpOracle.dll:C:\Oracle\product\11.1.0\db_1\LIB\afdutl32.dll')
)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(= Extproc PROGRAM)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.30.241)(PORT = 1521))
)
)
tnsnames.ora (on a 32-bit machine):
MYDB32 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.30.241)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = MYDB32)
)
)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)
Listener.ora (on a 64-bit machine):
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.30.247)(PORT = 1521))
)
)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(= Extproc PROGRAM)
(ENVS="EXTPROC_DLLS=C:\Oracle\product\11.1.0\db_1\LIB\pcpOracle.dll:C:\Oracle\product\11.1.0\db_1\LIB\afdutl32.dll')
)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(= Extproc PROGRAM)
)
)
tnsnames.ora (on a 64-bit machine):
MYDB64 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.30.247)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYDB64)
)
)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)
Issues related to the:
1 does extproc for Oracle 64-bit 11.1.0.7 on Win 2003 64 - bit 32-bit DLL load?
2 when searched got a quite a lot of link on extproc32 (for all versions of UNIX), but not for Windows and found this link - what want to say it is not possible to load the 32-bit on Windows 64-bit installation DLL?
3. is there no work around? Or am I confused so I would now go back and restore the 32-bit Setup?
Any input / recommendation is appreciated!
Concerning
KhaldiThis means is not possible to load the 32-bit on Windows 64-bit installation DLL?
Yes, it is not possible, see MOS/metalink:
Is it Possible to call 32-bit libraries on 64-bit Windows using external procedure Agent Extproc? [372512.1 ID]
Werner
-
ORA-03113: end of file on communication channel: delivered Oracle SQL
Hello
We have a SQL comes in an application engine that throws the below error:
1. SELECT DISTINCT ELG. EMPLID, ELG. EMPL_RCD, '99', ((ABS1. EFFDT)
2 + (1)), SYSDATE, EVT. GPDE_DV_EE_STATUS, EVT. GPDE_AL_FREQUENCY, "FM_CG_0811".
3 PS_GPDE_DV_ELIG_MO ELO, ELG, PS_GPDE_DV_FLT_ABS ABS1 PS_GPDE_DV_ELIG_MO
4, PS_GPDE_DV_EVTDFN EVT WHERE ELG. CAL_RUN_ID = "FM_CG_0811" AND ELG. EMPLID =
5 ELO. EMPLID AND ELG. EMPL_RCD = ELO. EMPL_RCD AND EVT. GPDE_DV_EVT_TYPE = '99' AND
6 ELG. GPDE_DV_SV_CODE <>' 0000' AND ELG. GPDE_DV_ACTIVE IN ('2 ', ' 3') AND
7 ELO. GPDE_AL_SEQNUM = ELG. GPDE_AL_SEQNUM - 1 AND ELO. GPDE_RP_SIGRS_ANLZ = 0.00
8 AND ELO. GPDE_RP_SIDAYS = 0.00 AND (ELG. GPDE_RP_SIGRS_ANLZ > 0.00 OR
9 ELG. GPDE_RP_SIDAYS > 0) AND ABS1. EMPLID = ELG. EMPLID AND ABS1. EMPL_RCD =
10 ELG. EMPL_RCD AND ABS1. CAL_RUN_ID = "FM_CG_0811" AND ABS1. ABS_BGN_DT < =.
11 ELG. PRD_END_DT AND ABS1. GPDE_DV_AB_CODE = ' A ' AND ABS1.» GP_UNIT IN (4,5,6) AND
12 EXISTS (SELECT 'X' FROM PS_GPDE_DV_TRIGGER WHERE TRIG TRIG.) EMPLID = ELG. EMPLID
13 AND TRIG. EMPL_RCD = ELG. EMPL_RCD AND TRIG. GPDE_DV_EVT_TYPE IN
14 ('09', '31', '32,' 33', 34') AND TRIG. GPDE_DV_EVT_EFFDT < = ABS1. ABS_END_DT AND
15 TRIG. GPDE_DV_EVT_EFFDT > = ELG. GPDE_AL_BGN_DT AND TRIG. GPDE_DV_EVT_EFFDT =)
16. SELECT MAX (TRIG2. GPDE_DV_EVT_EFFDT) OF PS_GPDE_DV_TRIGGER TRIG2 WHERE
17 TRIG2. EMPLID = ELG. EMPLID AND TRIG2. EMPL_RCD = ELG. EMPL_RCD AND
18 TRIG2. GPDE_DV_EE_STATUS <>' n AND TRIG2. GPDE_DV_EVT_TYPE NOT LIKE 2% ' AND
19 TRIG2. GPDE_DV_EVT_EFFDT < ABS1. EFFDT)) AND ((ABS1. EFFDT) +.
20 (1)) > = ELG. GPDE_AL_BGN_DT AND ((ABS1. EFFDT) (1)) > (SELECT MIN (E3. PRD_END_DT)
21. OF PS_GPDE_DV_ELIG_MO E3 WHERE E3. EMPLID = ELG. EMPLID AND
22 * E3. EMPL_RCD = ELG. EMPL_RCD AND E3. CAL_RUN_ID = "FM_CG_0811")
SQL > /.
SELECT DISTINCT TASKS. EMPLID, ELG. EMPL_RCD, '99', ((ABS1. EFFDT)
*
ERROR on line 1:
ORA-03113: end of file on communication channel
above sql is passed a statement selection-insert inline, however, as we see, the select query has a problem.
The interesting part is that if I change AND TRIG. GPDE_DV_EVT_TYPE IN ('09', '31', '32', '33', 34')
to AND TRIG. GPDE_DV_EVT_TYPE = '31'
so, it works!
Suggestions please!
Thank you
VikasAccording to the Metalink3 #654658.1, is not always past in 10.2.0.2, which means that it happens.
The Oracle suggested patch is #5128368 or a workaround is to cut the SQL into small pieces to avoid in.You could also start an SR to your Oracle support (no support Peoplesoft) to use them for the patch and/or workaround solution to apply.
Finally and not at least, it seems that Peopletools 8.49 are not supported on Oracle 10.2.0.2 (obligatorily 10.2.0.3 or 10.2.0.4).
Nicolas.
-
RMAN-06004: ORACLE recovery catalog database error: ORA-03113: end - of -
Hello
I experience backup scripts. because once done, she will move to pod pre box.
Database runs in mode archvelog
I have lgged in the dbserver himself.
the shell scripts is:
#! / usr/bin/sh
source. / game - env # this file will have ID password for catalogue and the target sources
echo executing command: database Backup
ECHO
RMAN TARGET $dbuser / $dbpwd$ rmandb CATALOG $rmanuser/$rmanpwd@$rmandb < < eof
Run {}
stop immediately;
start-up;
}
expressions of folklore
output
When I run, I get the following error
connected to target database: HERMESQA (DBID = 3819666523)
connected to the recovery catalog database
RMAN > 2 > 3 > 4 > 5 >
database closed
dismounted database
Instance Oracle to close
connected to the database target (not started)
Oracle instance started
mounted database
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the boot command at 11/06/2009 11:27:54
RMAN-06004: the recovery catalog database ORACLE error: ORA-03113: end of file on communication channel
could you suggest where I have error.
Thank you
Benjamin GopalDo not back up the database using the same catalog of recovery recovery catalog of accommodation. You could just try it back up without a recovery catalog and to ensure that this database has an automatic backup of controlfile, for example.
-
Satellite L300 - no start menu of Vista after installing Win 2003 Server
Hi friends
Recently, I brought Toshiba L300 (pre loaded vista). I want to install Sql server 2005 enterprise edition.
So I installed Windows 2003, enterprise edition.
After that I installed when I start laptop, it won't for the menu of the OS.
Its loading only Windows 2003.I want vista also.
Please help meAnd I need driver sound and video drivers for windows 2003...
Please help me
It is very simply;
Your operating system server Win 2003 a damage and crushed to the Vista Boot Manager menu and therefore you don't get the Vista Boot Manager.You just lucky to get this Vista Manager startup is again to boot from the ORIGINAL Vista MS DVD. He undertakes to repair the boot loader, and you will be able to start in Vista.
Then, you need to install the EasyBCD tool. It of free and this tool helps you to understand the additional operating systems in the Vista Boot Manager.
PS: Win 2003 Server drivers are not available. You could check if some drivers Win XP would work on this laptop.
-
Database Oracle ORA-01034 starts do not: ORACLE not available and ORA-27101
Dear Sir.
today I rebooted (GR 11, 2) database server after the database service does not start, the error message is
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 error: 2: no such file or directory
Process ID: 0
Session IDs: serial number 0: 0http://www.krenger.ch/blog/ora-00845-memory_target-not-supported-on-this-system/
-
vCenter 4.1 on win 2003 x 64 can not auto-start on startup
Hello
I just realized that my vcenter 4.1 can autostart, even when I had set to start automatically in services.msc on my win 2003 x 64 server when I did not connect from client vsphere 4.1.
Experiences and/or solutions?
the virtual service center requires your SQL database to be accessible. If you're hostng SQL server on the same host, you will find that most probably, the VC try start before ot the SQL service starts, so he fails to start - to connect later of course, SQL is running.
Details on how to set up a dependency here:
http://support.Microsoft.com/kb/193888
Good luck
Maybe you are looking for
-
How can I restore signal from my Mac Pro to my Viewsonic monitor, connected by VGA?
I have a Pro Mac OSX version 10.7.5 running. Trendy top is a monitor 24 inch Viewsonic, the only monitor connected. Last week, everything was fine. I stopped him all night and the next morning, when I tried to start, there was no signal from the Mac
-
Well, I'm a frequent user Firefox announcement recently that my cursor began to disappear when I'm not moving it. However when I press a key it flashes back for a second, when I move it sparkles a lot (one moment sound here awhile it isn't). How can
-
I get an error message that is related to "hpConnectionManager.exe".
How can I remove this message so it will be neither appear whenever I turn on the laptop? original title: hpConnectionManager.exe
-
Can't burn music CD - R. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link. What is an easy way to find and fix this? I know little about the links and need a simp
-
Random BSOD at startup, sometimes perhaps 2 to 4 times a week
Hello worldFirst of all thanks for trying to help. I was make a random BSOD from time to time at startup. I have the minidump file that is downloaded and have an html element. Before that all the tech news goes, I have a few things more talk, my v