Start / Paging file / TEMP / Drive problem fusion (listen to me)

Similar Questions

• Start with external hard drive problem

  I recently bought a Western Digital 1 TB external hard drive. When it is connected through the USB port my Pavilion a815n Windows XP hangs on the blue HP screen at startup. Western Digital technical support Advisor info sent to me I need to change a setting in BIOS but I can't find the trunk of USB device option setting in the BIOS of HP.  Can you tell me how to access this setting, or what else to do to solve the problem?  Thank you!  Jake

  Problem:
  After connecting a device USB to the PC, the computer does not start in Windows.

  Cause:
  The motherboard has a boot from the USB device, or a similar option, which is enabled in the system BIOS.

  Solution:
  In the system BIOS, disable the option to boot from the USB device and the USB Legacy Support option. This will allow the PC complete the process on the internal hard disk and allow you to enter Windows. If this does not work for any reason, you should boot your PC before connecting the USB key. Once the computer is fully booted Windows, plug the USB and wait for the operating system to detect the drive.

  Update the BIOS seems to have solve the problem. It was normally restarted with the attached hard drive.  Thank you!!  Jake

• Driver problem with a dc7100 cmt

  I have a driver with my Hp dc7100 cmt tour 7 months ago, I upgraded Windows Xp pro to Windows 7 Edition System Home Premium, it was working fine... or so I thought, then week or so I did a Windows update that has problems starting

  Windows 7 upgrade advisor has been downloaded in my system, I started to have a driver problem he always tells me to update my drivers for systems, I well updated some drivers but I was not of the most important of them.  It is a Graphics driver (WDDW) driver for windows aero graphics would work my CD-Room go stale and USP port pilot who was also outdated... The player windows Media have also stopped...  He told me to contact my PC manufacturer or retailer to see it an upgrade is available, I've been looking and asking for two days... I hope someone reading this and can give me some advice on how I can get these updates, or tell me why I can't get HP... My goal is not to get out a purchase of a new system, but fix the one I have... as a student, my funds are very low!  Pease Help, thank you

  Hello:

  What graphics card you have in your PC?

  You mentioned Aero, and you wouldn't get Aero on a dc7100 with the integrated Intel graphics card.

  You'd only Aero, if you have a PCIe x 16 graphics card is windows 7 capable.

  If you have the Intel integrated video card, I got something that will install the video driver, but you won't have Aero.

  In addition, he will work for W7 32 bit.

  So, please post back and let me know what video card you have in the PC, because if it's an add-on, one, I would need to know the manufacturer and model.

  Paul

• I just want to know if there is a problem if I delete the files '%Temp%' race

  Hey guys, I just want to know if there is a problem if I delete the files '%Temp%' run! ???

  Free disk space
  Last updated 18/01/2014
   

  Content

  • To see how much space you have used and free
  • To see where the files are too much space
  • Disk Cleanup
  • System restore
  • Fix the basket
  • Fix temporary Internet files
  • Delete files in the system and the folder Temp of Service Profiles
  • Check the size of the swap file
  • Disable the hibernation
  • Compact the Windows databases use various
  • Delete the files updated by the Service Pack
  • Move your Documents
  • Remove saved files created by Photo Gallery
  • Which extends the size of the disk
  • Compress files
  • Turn off the low disk space warnings
  • Boost disk cleanup
   

  To see how much space you have used and free

  Start - All Programs - Accessories- Click with the right button on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  For the system drive

  WMIC volume where (DriveLetter = '% lecteur_systeme %') are legend, capacity, freespace List

  For all readers

  WMIC volume get/all, freespace, the ability, the legend

  If you want to store this info on your desktop

  WMIC /append:"%userprofile%\desktop\Free on disk space" volume get Caption, freespace format:htable

  To open double click on Free Disk Space on your desk or type

  Start "" "%userprofile%\desktop\Free report.HTML of disk space.

  Then come back here after cleaning and repeat these commands to see the difference.

  If for any reason, the wmic command does not work, use these two commands. Both take a lot of time.

  % Lecteur_systeme % - one defrag

  or

  dir %systemdrive%\*.*/a/s

   
  To see where the files are too much space
   
  It lists the number of files and the size of the folders on your drive. Each command is a subset, so you can run it better.
   
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
   
  Then configure the command prompt. Right-click on the tab of the titlebar - Properties - Layout command prompt - and enter 1000 screen buffer size height and 43 (or 50) to Window Dimensions height. Change the color (color tab) and the police (police tab), if you want.
   
  To see the size of the folders in Documents, excluding images, video, or music files.
   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Personal"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "\/"^|findstr/l/v "photos video" ') @echo %j & echo. "

   
  To see the size of the folders in the music.
   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My music' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the image files.

   

  for /f "Skip = 2 tokens = 4" %A in (' Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" "My pictures" /v ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files in the video.

   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My videos' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files on the desktop.

   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Desktop"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

  To see the size of the files in the Windows folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%windir%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   
  To see the size of the files in the Program Files folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%ProgramFiles%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

   

  Disk Cleanup
  To run Disk Cleanup, normal is to click with the right button on the drive in my computer (Start menu - computer), then Properties - general tab - Disk Cleanup button.
   
   
  Another way is menu Start - All Programs - Accessories - System - Disk Cleanup tools.
   
  Disk Cleanup can be started from the command line.
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   
  To make your primary drive.
   

  cleanmgr letter

   
  Choose which lead to do.
   

  Cleanmgr

   
  See the last section of this post to see how to performance of disk cleanup.

   System restore

  With disk cleanup displays above the Other Options tab. You can delete all but the last System Restore point and see if that is too much space.

  System Restore uses 15% of the space normally. Change click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and navigate to

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg

  Double click on DiskPercent and click on decimal and change the value to the desired percentage,

  You can change the command prompt.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the system restore folder.

  You don't normally have access to this folder. You will need to take possession, allow administrators to permission, then the size of the query.

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  dir "%systemdrive%\System Volume Information" / a/s

  To see the current percentage

  Reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent

  It is in hexadecimal. The numbers are 0-9 and a-f. So 0xf is 15. 0x5 is 5, 0 x 9 is 9, 0xa is 10, 0 x 14 is 20.

  To set a different value.

  You can use decimal values to set. This affects 10% (in bold in the example and the last item in the line).

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent /t REG_DWORD /f /d 10

   
  To repair the system restore, file delete and restart the system restore.
    

  SC stop vss

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  e "%systemdrive%\System Volume Information" / q/s

  SC start vss

  Fix the basket

  Sometimes, files get lost in the trash. Remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.

  Empty the trash.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the files in the Recycle Bin

  It must have one or no files inside if you work. There should be a directory (folder) by user.

  dir % systemdrive%\$RECYCLE. BIN\ *. * /a /s

  To reset the trash

  e % systemdrive%\$RECYCLE. BIN/s/q

  Fix temporary Internet files

  Sometimes, files get lost in the temporary internet files folder. Delete the files. It will be automatically recreated the next time download you. It will remove the current user only.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the temporary internet files size empty files folder

  RunDll32.exe InetCpl.cpl, ClearMyTracksByProcess 8

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

  Then delete.

  First close Internet Explorer. Some files may not remove at the moment, they can be deleted later.

  "%userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files" del /s /q

  So to see the new size.

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

   
  To see the size of the cache, type the following
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  Reg query /v "Settings\5.0\Cache\Content Software" CacheLimit valid

  Use the calculator to convert hexadecimal into decimal. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter the value returned above. Menu display - decimal. To convert windows units divide by 1024 for kilobytes, divide by 1024 megabytes.
   
  Located between 50 MB and 250 MB. You can use decimal here. The unit is expressed in kilobytes. Here it is 250 megabytes (250 000 x 1024 bytes)
   

  Add tracking 'Software Settings\5.0\Cache\Content' v CacheLimit valid /t Reg_DWord /d 250000 f
  

    

  Delete files in the system and the folder Temp of Service Profiles

  The system temp folder is only used when no one connects. It is rarely used but never cleaned. Some services have their own temporary folder which is also cleaned.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To the list

  dir c:\windows\temp C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp/a/s

  To remove

  del C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\*.* C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\*.* c:\windows\temp\*.*/s/f/q

  Check the size of the swap file

  As a rule generally you want to your swap file slightly larger than the amount of memory that you have. It develops automatically but spread automatically. If you use hungery memory programs as this video editing should be bigger. If too big you can reduce and rush of space can be moved to another drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see what was your use

  WMIC pagefile get List

  To see the size of the file on disk

  dir /a c:\pagefile.sys

  To change the size or change the road see change the size of virtual memory in Start - Help and Support.

   

  Disable the hibernation

  The file shows up is the same size of installed memory. If this is not the case, turn off the computer in hibernation and save a lot of disk space.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see if it is on

  If the file will be found. If off the file won't be there.

  dir %systemdrive%\hiberfil.sys /a

  To turn off

  powercfg-h off

  Make a u-turn

  powercfg-h on

  Compact the Windows databases use various

  You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, and certificates of security, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

  Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

  See how much space taking up type which is below and note the total size (because it scrolls away).

  Start - All Programs - Accessories- Click with the right button on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  Then at compact

  SC stop wuauserv

  stop bits SC

  SC stop wsearch

  SC stop cryptsvc

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /p "%A" / o

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /d "%A".

  SC start cryptsvc

  SC start wsearch

  SC start bits

  SC start wuauserv

  Then to delete some temporary files.

  del c:\*.integ.raw c:\TEMPDFRG*.edb/s

  To see the new size and compare it to the old size

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  If a program has a file open, you can use this procedure to find out which program.

  openfiles/local on

  Reset

  openfiles/query /v | findstr /i "WebCacheV [0-9] *------catdb \.edb \.msmessagestore .dat".

  Delete the files updated by the Service Pack

  See how much space taking up type which is below and note the total size (because it scrolls away). Also, note that the total is higher than it actually is.

  This will remove the ability to uninstall service packs.

  According to the service pack that Windows was provided with you can have both, one or none of these two files.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir /a /s c:\Windows\WinSxS

  Then type

  Vsp1cln.exe

  COMPCLN.exe

  To see the new size and compare it to the old size

   

  c:\windows\WinSxS dir /a /s

  Move your Documents

  If you have another disk, you can move the documents folder to it.

  Click with the right button on your Documents (or pictures, etc.) Office, videos, Contacts,) the tab file - Properties - location - move.

   

  Delete the thumbnail and icon Caches

  These files can contain thumbnails or icons of files deleted a long time ago. The files will be recreated if necessary.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste). The desktop and the start menu will disappear briefly.

  To see the size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

  then remove

  Taskkill /im explorer.exe/f
  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  
  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
  del "% userprofile%\AppData\Local\*.db".
  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
  Explorer

  to check the new size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

   

  Remove saved files created by Photo Gallery

   

  Photo Gallery Windows makes a copy of any file that you are editing. Click Start - All Programs - Accessories - (or press the Windows key + R). Type

  Images of the hull: original

  Delete the ones you don't want.

  Which extends the size of the disk

  If all the space on the disk has not all been used it is possible to extend your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  DiskPart

  then type

  Select the c volume:

  Then type to see in size

  the list volume

  then (it will work if possible or not as appropriate)

  extend

  type to display the new size

  the list volume

  then type exit

  output

  If you want advice on the extension of the partition type the following and paste the result back

  DiskPart

  list disk

  the list volume

  Select disk 0

  partition from the list

  Select disk 1

  partition from the list

  output

  To copy the final text right click in the window - Mark , then select the text and press enter.
   

  Compress files

  There are two ways to compress files in windows. Zip files and built-in file compression. It's built-in file compression. For more information on compression type zip in Start - Help and Support .

  Photos, music and video are already compressed. They can get larger if Windows tries to compress it any further. Also usually a bad idea to compress system files.

  If you have files of worksheet they can very well be compressed. If you have files, installation files, they can also be good candidates. Web pages are also good candidates.

  In Windows Explorer, blue file names means Tablet (it is the file system compression not aka zip files compressed files). Green filename means Encrypted.

  To disable file names colored, in Explorer - Tools menu (Alt + T)- display tab and then clear the check box for Show encrypted or compressed NTFS in color .

  Windows compression, encryption and security to work for the most part by applying attributes to a folder and the files in the folder inherit the folder.

  If you have all the files appropriate for compression, find them in solution, made Explorer right click - Properties - general -Advanced button tab - Compress contents to save disk space. Choose to apply to all files and folders when asked.

  To use a command line to compress the files in the Favorites folder.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  compact/c /s:"%userprofile%\Favorites." *

  Put in Favorites to compress files added

  compact/c /s:"%userprofile%\Favorites.

  To view the details of the compression of the Favorites folder

  Compact '% userprofile%\Favorites\*.* '.

   

   

  Turn off the low disk space warnings

  To disable the function to display the disk low space warnings.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" v "NoLowDiskSpaceChecks" /t REG_DWORD /d 1 f

  gpupdate/force

   

  Boost disk cleanup

  • Operation of disk cleanup
  • Schedule disk cleanup
  • Creating custom cleaners

  To see a list of products of cleaning disk cleanup.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  @echo. & @echo list of cleaners&@echo = & FOR /F "usebackq tokens = 8 delims =-' %i IN ('reg query 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches'") @echo %i

  
   List of cleaners
   ================
   Active Setup Temp Folders
   Content Indexer Cleaner
   Downloaded Program Files
   Hibernation File
   Internet Cache Files
   Memory Dump Files
   Microsoft_Event_Reporting_2.0_Temp_Files
   Offline Pages Files
   Old ChkDsk Files
   Previous Installations
   Recycle Bin
   Setup Log Files
   System error memory dump files
   System error minidump files
   Temporary Files
   Temporary Setup Files
   Temporary Sync Files
   Thumbnail Cache
   Upgrade Discarded Files
   Windows Error Reporting Archive Files
   Windows Error Reporting Queue Files
   Windows Error Reporting System Archive Files
   Windows Error Reporting System Queue Files
   WLX Thumbnail Cache
  

   

• Virtual memory warning reset itself - problem of paging file No.

  Hello

  Since my upgrade from Vista to Windows 7. .everytime I restart my computer, maintains memory virtual reset itself. It keeps the switch back to "No paging file" and the "exécution Options" window keeps popping up when I restart my com.

  I tried value "Automatically manages the size of pagefile for all readers" and even "system managed size" and "custom size." When I try to reopen the window, it gives me this pop up:

  "Windows will create a temporary swap file on your computer because of a problem that occurred with your paging file configuration when you started your computer. File size of total paging for all disk drives may be a little larger than the size you specified.

  I tried to delete reg entry and see if it will fix itself... no agreement.   I have 3 GB of RAM...

  Help, please!

  Disabling AFS.sys (sc config start = disabled afs) has toured my situation when I had this problem (see http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/c5cfe9d0-e3d8-4625-85b1-3efdf04cd1a0 for full details).

  Arrive at an elevated command prompt (Démarrer\Tous Programs\Accessories - right-click on command prompt and select "Run as Administrator") and type the command above (sc config start = disabled afs).  Press enter and you will get a confirmation message that the Setup is complete.  Reboot and you should be able to put your swap file.

  Don't know why this happens, but starting from the thread that above, it appears that AFS.sys really did a lot for you, and my Win7 upgrade system works well without any problem in this configuration.

  I hope this helps.

• Problems with .dll and WPD files Volumn Driver Windows files is installed but does not work

  I wondered about the .dll files... I have internet explore as a default package as well as Java (TM) web start launcher by Oracle. Can you suggest other programs. I have all the Adobe programs. I would really be able to bind the DLLs of Visual Basic... but VB 08 also do not install and run on my computer, but also the Framework.NET version 4. Be an error in C:\Windows\system32\mvsvc.dll

  I couldn't install Windows WPD files Volumn driver and here's the windows diagnostic ran for me: what can I do to get this driver to run. Device in Windows systems manager is not supported on my system.

  Description

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 10.

  Signature of the problem

  Problem event name: PnPDeviceProblemCode

  Architecture: x 86

  Hardware ID: wpdbusenum\fs

  Configure the class GUID: {eec5ad98-8080-425f-922a-dabf3de3f69a}

  The PnP problem code: 0000000-a

  Driver name: WUDFRd.sys

  Driver version: 6.0.6001.18000

  Driver date: 01/19/2008

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  DMI9C45.tmp.log.XML

  LOG9C46.tmp

  wpdfs.inf

  Thank you. I tried for days now to get this driver to run.

  Jann B

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• a paging file alert is on start up. I put the advanced settings. restart and the same alert happens. tried to adjust the EMR, that he won't let occurring

  virtual memory will not be set. I've tried everything. I also tried lighting the EMR but the ide ata / atapi does not work according to the instructions. Help

  Hi John abney,.

  Thank you for visiting Microsoft Answers.

  To change the size of virtual memory, follow these steps.
  1. Click Start, select Control Panel and click on system and Maintenance.
  2. click on system.
  3. in the left pane, click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. on the Advanced tab, under performance, click settings.
  5. click the Advanced tab, and then under virtual memory, click on change.
  6. clear him automatically manages the size of pagefile for all drives check box.
  7. under drive [Volume name], click the drive that contains the paging file that you want to change. Click Custom size, type a new size in megabytes in the initial size (MB) or maximum size (MB) box, click on set and then click OK 3 times.

  You can consult the following link: http://windows.microsoft.com/en-US/windows-vista/Change-the-size-of-virtual-memory

  Swati K - Microsoft support technician

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The paging file must be on SSD or HARD drive?

  * Original title: hard drive swap file

  The paging file must be on SSD? or HARD drive?

  Thank you

  I think that it is better to use the one we have the highest speed of read/write. In most cases, it would be the ssd. There plenty of room as you have good RAM. In my case it is 24 G, so it maybe is a consideration as well, if you are limited on space. Probably, it would not hurt to change it to one that you you do not for the moment and then see if it starts faster on the hibernation or stops faster. In fact, I have the file page disabled on my laptop to save space with a lot of other consequences that can't Hibernate.

• Trying to determine if BCD is fixable software/driver problem or hardware failure (GPU)?

  Hello

  I think this is the right place to post dump files memory to get the help of troubleshooting questions? I started on this: link

  to use Driver Verifier, and the latter built: link

  Learn how to find and download the files to get help. So this is a link to a drive to memory.dmp, extreme system windows system and report AIDA64 information: onedrive

  I suspect that my problem is a graphics card fault, but before I go out and buy a new one (not the best time now) I'm trying to determine if it is indeed a hardware problem that needs to be replaced or if it's a software/driver problem that can be solved. I had this crash pop up sometimes in the past, but it was very little common, until two days ago, I was playing a game more modern and the screen cut out on me & computer crashed. I had to be hard to recover the low once or twice until. I went to a game played and lower spec for awhile and it crashed again. Now it crashes whenever I start (sometimes canned music plays while the screen is dead) and now also when you watch a video or just browsing youtube.

  I already messed up around the graphics driver is uninstalled, using a program slate for leftovers, running a complete windows defender scan in safe mode and reinstall the graphics drivers. Doesn't seem to help. If my computer is turned off for a while she seems okay if I do not do much with it, but once it blocks then happens much more frequently to the point I just have to close for a while. It should not also be an overheating problem, I ran a tool to check the temp and my card works at 37 c in windows and 43 in a game low spec.

  For any help or suggestion would be appreciated, thanks. Once again, I want to know if it is something that can be fixed or if I need to replace something. I really need a new PC, but do not have funds for the moment, but I can handle a new GPU.

  If you have the integrated video card, you can always use it and calm down your use of graphics for a while... also consider whether there are computer shops and parts used in your area and find a backup card. If you need to adjust your monitor to the onboard video (as in DVI / VGA) there are adapters for this that attach the monitor cable with the connector on the computer.

  Redundancy, even if it is the same, is always good.

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Alternative to the reset by Satellite A660 for potential HARD drive problem

  In the last week or two, I got a few blue screens, saying he was driving demand, and that windows must be shut down to avoid damage my computer.

  I have just restart and continue working.
  The last time it happened, I had repeatedly "initialization failed" and it says hdd, SDS, fdd. If I pressed the power button until I didn't see no signs of activity, then started. Things went well. I called Toshiba support and they recommended that I go home and save my files before continuing. It took hours selectively to clean, sort the previous backups, and a small footprint of the backup system.

  When I called Toshiba once again, they recommended a "takeover", which is restoring the factory settings. It puts me in the stone age. I have to go through a never-ending process of the upgrade to Windows 7 Pro 64-bit, install and reconfigure all the applications and environments/configurations, etc. It will essentially take on holiday, if not more. I'll also have to get another computer (maybe a netbook) to stay in touch while I restart my laptop. It's barely more than a year.

  Is there a diagnosis I can do to determine the probability that there is a hard drive problem? Support for Toshiba said that is the surest way, because it provides a diagnostic F10 for the hard disk code, and it also pushes the bad sectors at the end of the disc (logically, I suppose, since you can't physically move a fault).

  > About Hitachi DFT, is it important that my HARD drive is Toshiba mk6465gsx? This is what is displayed "Hard drives" in the Device Manager.

  It s no matter what HARD drive manufacturer, it is the Drive Fitness Test is able to scan all hard drives to find errors.

  > Also, http://www.hitachigst.com/support/downloads/#DFTshows links to create boot disks, but I was wondering if I could create a bootable instead.

  Not sure if this is possible if there is that one option to create a startup disk, and then a flash stick does not work. But of course you can try this out.

  > This laptop does not come with a floppy drive, and I still create coasters trying to burn discs.
  You don't need the floppy drive, the tool must create a disk bootable (CD)

  > I guess that the same question can be asked on Memtest86. Another issue is the relevance of Memtest86 for my system. My c drive has a "Program Files" folder, but also a "Program Files (x 86)" folder for 32-bit applications. Memtest86 is for the x 86 architecture. I don't know if my 64-bit Windows 7 involves a non - x 86 architecture.

  I guess that Memtest86 should also work on Win 7 64 bit systems. But also the MemTest 4.20 is 64-bit capable

• Failed to get on the Web. Driver problem?

  I started having trouble with my Compaq Presario, out on the web.  I started working with a direct technology company,
  who is on your remote computer.  had some experience with them, which was really good.
  After a few days now (about 7 hours in total) they think I have some sort of driver problem and he said I need to get
  a Service Pack 3 for Windows XP Pro disc (which I have on my computer) since I can't get out, I talk to them with the laptop of my son,
  Windows 7 Home premium with SP 1.
  I can't find such a drive to buy.  Can I download a file SP3 from Microsoft, to my son's computer, burn it to a disk to use with my computer?

  Martin H,

  We can update the SP 3 for your system,
  Here the link to download:
  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
  Kind regards
  Chauvet J.

• Cannot start the new hard drive after clone on T61p

  I have a T61p which had a Hitachi HD of 100G.  I bought through Lenovo a Toshiba 500 G HD placed in the location of the laptop HD, put the old HD 100 G in an ultrabay adapter when we normally DVD drive and booted from a Clonezilla Live USB 4 G drive.  I made one device to device taking the detault options.  Seems to have worked without any problems.  I change all parameters of the pre box office IBM.

  BIOS is set to boot the HD in the laptop HD slot, then the HD in the ultrabay slot.  However, after start-up, it seems I'm now start from the old drive in the ultrabay adapter.  Windows Vista disk management shows the two discs, and it shows both drives, even with a score of 700M, then roughly a score of 93G.  The new HD has the rest of the unallocated space, which is ok since I use Vista or GPARTED to decompress.  The old HD has a flag "boot" game, and both car are "active".

  If I take the HD in the ultrabay outside housing, I get a black screen with a title of Manager of Windows startup with three options, then the error below:

  file: \windows\system32\winload.exe

  status: 0xc000000e

  DESC: the selected entry could not be loaded because the application is missing or damaged.

  I have googled and looked through this forum and found several hits, but I don't know what I see.  I saw where someone had used Norton Ghost with the - ib switch, but I have used Clonezilla.  Any ideas?

  ALSO, how can I know if I have successfully copied the pre box office IBM?  and if I have to put hormaux or people with reduced mobility, where could I do?

  Problem solved.  Since then I cloned the drive and which included the partition predesktop area/hidden from IBM, so with the old drive in the ultrabay being removed housing, I was able to start using the blue thinkvantage key when starting of the machine.  From there, I could run a repair that solved the problem.  Now, the new disc has the 'boot' flag and cannot be used for a startup in Windows Vista.

• driver problem on teredo tunneling adapter device Microsoft

  The message is that a driver problem has been detected on Microsoft device adapter tunnelling teredo, reinstall the driver. to try to reinstall the driver, I get the message "this device cannot start [code 10]."

  I have Windows 7 home premium, any suggestion would be appreciated.

  You have a "HP"?

  If so, this may be of interest: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Microsoft-Teredo-Tunneling-Adapter-Code-10/td-p/4204314

  Or see this thread for common solutions: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/troubleshooting-sony-vaio-windows-7-computer/177ed59b-028f-432a-b451-7c52e1ce6b6c

  Quote:

  The most common resolution is to update the drivers associated with the device. To do this, follow these steps:

  a. in the device properties dialog box, click the driver tab.

  b. click put to update driver to start the Upgrade Wizard to update the material.

  c. follow the instructions to update the driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: You may be prompted to provide the path of the driver. Windows may have the built-in driver, or the driver files can always be installed since the last time that you have configured the device. If you are prompted for the driver and you don't have it, you can try to download the latest driver on the manufacturer's Web site.

  Discussions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Microsoft-Teredo-tunneling-adaptor-not-working/085a88bb-16cc-4E30-A4D6-ac987038a648

  Associated content

  • Microsoft Teredo Tunneling adapter does not (the device cannot start)...
  • Microsoft Teredo Tunneling adapter does not
  • Teredo tunnel card no working__
  • Microsoft Teredo Tunneling adapter does not...?
  • Microsoft Teredo Tunneling adapter works does not properly, computer...

• Dell Inspiron 15R SE AMD video driver problems (7520)

  Hello

  Updated Windows Installer update drivers AMD GPU for me earlier. I think the problem is that it has installed the AMD site instead of graphics drivers switchable drivers that are compatible with my laptop (Inspiron 15R SE).

  All programs that use the AMD card crashes when I start the system, including the Catalyst Control Center and the switchable graphics program. I tried to get into windows to display advanced options, but windows stops responding when I open the menu (Gray screen for about a minute then it returns with the window closed).

  Dxdiag crashes if I start it, and if I try to run again he asks me if I want to run without Direct3D. If I press 'No', it crashes. If I accept, he let me in but does not detect the graphics card AMD.

  I tried to uninstall the drivers and re - download coupons Dell website, but the problem persists.

  I'm running an AMD Radeon HD m 7730 GPU and 4000 HD Intel integrated graphics.

  TL; DR: All programs set to use graphic crash dedicated. Drivers say they have updated, but the problem is still there. Cannot access driver rollback screen (windows crash).

  If you need more information, just ask. I run the Dell Diagnostics tool and he found nothing wrong, so it is a driver problem.

  Hello

  I followed the steps you posted. Uninstall driver AMD asked me to restart later, so I allowed him to. I was greeted with a BSOD whenever I started. I tried to boot my Dell driver recovery disk, but there is no drive detected. I finally decided I had to do a system restore.

  The good news is that the problem is resolved.

  Bad news is that I lost all my files. This time I am disabling the windows driver updates...