start reading at the beginning few visa

Similar Questions

• How to read from the beginning to reference trigger?

  Hello!

  I develop a system a little on a NI DAQmx 6025 and want to know how can I get data from an early relaxation of reference.

  I use "AcqVoltageSamples_IntClkDigStartAndRef.2008" to control the unit in c#

  If I set up the Starttrigger only, I can trigger... (the measure is to start by climbing aboard PFI0)

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  myTask.AIChannels.CreateVoltageChannel (physicalChannelComboBox.Text,"", (AITerminalConfiguration)(-1), rangeMin, rangeMax, AIVoltageUnits.Volts ");

  myTask.Timing.ConfigureSampleClock ("", sampleRate, SampleClockActiveEdge.Rising, SampleQuantityMode.FiniteSamples, 1000);

  myTask.Triggers.StartTrigger.ConfigureDigitalEdgeTrigger ("/ PFI0/Dev1", DigitalEdgeStartTriggerEdge.Rising);

  Reader = new AnalogMultiChannelReader (myTask.Stream);

  ...

  drive. SynchronizeCallbacks = true;

  drive. BeginReadWaveform (-1, New AsyncCallback (myCallback), null);

  ... MyCallback...

  data = reader. EndReadWaveform (ar);

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Now, I want to stop my measurement by the trigger of the reference, so I set up the Referencetrigger on the same source (PFI0)

  myTask.Triggers.ReferenceTrigger.ConfigureDigitalEdgeTrigger ("/ PFI0/Dev1", DigitalEdgeReferenceTriggerEdge.Falling, 10);

  (This line is after the configuration StartTrigger)

  If I start the task and give the triggersignal, the measurement starts. But now the measure must stop if I start PFI0 again!

  I don't know what I have to do to become a measure from the beginning to trigger Stop... I mean PFI0 PFI0 rising Edge edge

  Thanks for the support!

  Suchen für alle die noch immer nach einer Antwort, ich habs jetz!

  For all who are looking for this answer, I get it now!

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  myTask = new Task ("aiTask");        Create a new task
  Initialize local Variables
  Double sampleRate = Convert.ToDouble (rateNumeric.Value);
  Double rangeMin = Convert.ToDouble (minimumValueNumeric.Value);
  rangeMax double = Convert.ToDouble (maximumValueNumeric.Value);
  Create a virtual channel
  myTask.AIChannels.CreateVoltageChannel (physicalChannelComboBox.Text, "", (AITerminalConfiguration)(-1),
  rangeMin, rangeMax, AIVoltageUnits.Volts);
  Set up sync Specs
  myTask.Timing.ConfigureSampleClock ("", sampleRate, SampleClockActiveEdge.Rising, SampleQuantityMode.FiniteSamples, 1000);
              
  Configure start and reference triggers
  myTask.Triggers.StartTrigger.ConfigureDigitalEdgeTrigger ("/ PFI0/Dev1", DigitalEdgeStartTriggerEdge.Rising);
  myTask.Triggers.ReferenceTrigger.ConfigureDigitalEdgeTrigger ("/ PFI0/Dev1", DigitalEdgeReferenceTriggerEdge.Rising, 100);

  Check the task
  myTask.Control (TaskAction.Verify);
  Create the object reader
  Reader = new AnalogMultiChannelReader (myTask.Stream);
  Start the task, and set the playback position
  myTask.Start ();
  myTask.Stream.ReadRelativeTo = ReadRelativeTo.CurrentReadPosition;

  AnalogWaveform[temp];

  {while(!myTask.IsDone)}
  Temp = reader. ReadWaveform (60000);
  }

  myTask.Dispose ();

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Mit dieser Lösung kann man von mension zu messen mension.

  With this resolve you can measure from edge to edge.

• Doesn't have installation of Vista updates. He continues to try set up the third update with 0% completion and then it turns off and start again from the beginning. Keep in the loop... Help! There is no error message.

  As above. He is not in windows more simply the third update installation and then turns off computer and restart new since the beginning. Tried running safe mode but without success

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Stop and restart Windows Media Player starts playback from the beginning, rather than the last played time

  I just set up a new computer and have windows 7 home in windows XP and formerly on my Windows 7 laptop when I got to the top of the Media player, it is always picked up with the last song playing when I stopped it now on my new computer and laptop when I restart the game, it starts at the 1st song in the library , how can I do start with the last played I was not able to find something that will tell me

  Thank you

  This isn't a feature of this program, he remembers of this piece has been played last time.

• How to set the waveform table to start data since the beginning of the race

  
  

  Create a property of the graph node.  The property you are looking for is history.  This property, you can clear the table.

• audio is launched from the beginning of the song little matter where I click in the movie timeline to start playing?

  I need the audio to help the photo calendar synchronization. However, no matter where I start playback to check a second time when a certain image, audio ALWAYS starts again from the beginning of the song! How can I stop this?

  Since you have posted in a forum XP... I'm guessing that you're
  using Movie Maker 2.1?

  If you drag the playback indicator (vertical line with square
  at the top... Rest the pointer on the square and drag)...
  the music should start playuing.

  Unlike the video track... you can click left/make dragging clips
  the audio left and right. And you can change the
  duration of a single photo on the timeline manually. Move
  your pointer autour in border of an element until you see a
  double red arrow. Now drag the double red arrow... you'll
  display a ToolTip that shows the evolution of life.

  Articles that offer information about audio sync with the video

  "Collections of projects".
  http://www.Papajohn.org/newsletters/024-Collections.html

  Study the rendering of DV - AVI files
  http://www.Papajohn.org/newsletters/048-StudyDV.html

  Editing film 'Basics '.
  http://www.Papajohn.org/newsletters/139-EditingBasics.html

• FledgeHook should run whenever a simulator is started or can I just he start at the beginning of my day?

  C:\Eclipse\plugins\net. RIM.ejde\vmTools > FledgeHook

  Make FledgeHook every time I start a Simulator or can I start FledgeHook at the beginning of my day and let it run without having to start and stop each session Simulator?

  Edit: I started the Eclipse Simulator and run FledgeHook from a command prompt and it runs for about 10 seconds and then closes - I can watch it in the Windows task-> process manager.

  Is it supposed to do?

  Hi Todd.  Thanks for the clarification and sorry for be not more detailed in my earlier answers.

  As you indicated, there are essentially two ways to close the Simulator: out of in the Simulator itself (output, x-button at the top, etc.); Select disconnect from the Eclipse.

  In the first scenario, Eclipse closing the Simulator itself, is never notified the fence on win7 64-bit, and if the process is around.  Where the need for a FledgeHook be executed until we can make the plugin do that for you.

  In the second scenario, when you click Disconnect in Eclipse, Eclipse 'knows' you try to shut it down and are able to clean the process, without the need for FledgeHook.

  In addition, it is only a problem with pre - 6.0 simulators.

  Are there opportunities you can test both scenarios that I pointed out and report to confirm that this is actually relevant to your experience?

  Thank you!

• RAM Preview starts at the beginning of the work area

  Hello

  I've just updated my computer to AE CC 2014 running on OS X Yosemite, and I searched around, but can't find anything on this subject.

  When I do a preview RAM of my workspace, it will not start playing from the beginning. It loads the entire work, and if I sound/music I can hear the music start playing from the beginning, but I do not see the image plays until after about 1 second.

  It is not because of the RAM preview of"current time" parameter, which is off.

  Data sheet:

  MPB retina end of 2013

  2.3 GHz i7

  16 GB OF RAM

  GeForce GT 750M 2048MB

  OS X Yosemite

  After Effects CC 2014

  See the description of the problem here:

  http://bit.LY/AE_MacOS_Yosemite

• 2015 CC took over at the beginning of the timeline, when voice-over recording

  Im trying to record some simple voiceover for a project. Whenever I click on the microphone icon in the track to start the recording, he jumps at the beginning of the timeline to record.  It doesn't matter what position in the timeline panel, I always leave her start recording from the beginning. I need to be able to specify where to start voiceover recording.  This does not appear to be linked to this particular project that others work great too.  Is there a setting somewhere that I'm missing?

  I thought about it.  I had to delete the entry and exit of the markers.

• Reinstall Photoshop elements 11 since the beginning

  I use Photoshop elements 11 Organizer and the system is so corrupt I want to start again from the beginning. I have all my photos on memory sticks so I am not concerned the removal of the pictures by mistake. I want to start from scratch and with a clear Organizer.

  In an effort to remove all the folders, I tried deleateing Photoshop Elements and then put it back, but when I looked at the files after you have reinstalled the program, they were exactly the same as they were before I deleated the program. I want to erase all records from the organiser and then start again.

  I would appreciate your help in clearing records and allowing me to start from the beginning.

  Thank you

  David Maddams

  http://helpx.Adobe.com/Photoshop-elements/KB/manually-remove-Photoshop-elements-11.html

• When I use my iPod in my class, I often play a short part of a song and then go back to play again. He goes back in the beginning, it starts a few seconds in the song. Any ideas on how to solve this problem? Thank you!

  When I come back he's going all the way back to the beginning. How to fix?

  • So you-and-release press the left arrow key, the iPod jumps at the beginning of the track
  • If you press and hold the left arrow button, iPod scrolls when you release the button and the reverse (rewind), the song will continue where the rewind is going on.

• How to start the wizard for the Driver NI-VISA development

  IM reading this manual:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  I have labview8.6 on this pc, and I installed the driver NI-VISA 4.6... the manual says:

  "" "" 1. to open the DDW, select Start ' programs ' National Instruments ' VISA ' VISA Driver Developer Wizard.

  but the thing is, the menu of VISA, there are a few documents... There is no VISA Driver Developer Wizard... but I installed the driver NI-VISA 4.6... any ideas?

  In fact this explains the problem. You install DURATION VISA. If you re-run the installation program, you will see the feature tree seems different from that displayed a stone.

  The component you need, driver development Assistant, is in full VISA distribution, which you can download from the link below. The runtime is usually designed for deployed application. The development tools are absent of the runtime and are in the full distribution.

  http://Joule.NI.com/nidu/CDs/view/p/ID/1370/lang/en

• PC does not start: fans increasingly turn upwards at the beginning!

  Hi all

  I have a Compaq CQ5335fr that worked very well for a few years (3).

  Then one day he went suddenly and would not start more:

  When I turn it on, fans (CPU and chassis) begin to run for 15 seconds and then they stop turning. Only the fan keeps spinning GPU. I'm still blue and orange lights on the front of the desktop computer.

  Usually, I push the power button upwards until he died. Then when I restart, same thing!

  I have tried the following with NO SUCCESS:

  -clean & dust parts

  -Reset CMOS

  -Bought a different PSU

  -Play with DIMM (put one by one, reverse, etc..)

  -Disconnected all components and reconnect a
  - And a few other desperate things
  -Put the drive in another computer to check if the data is there: OK (although he had ' cant' access ' errors at the beginning)
  Nothing has worked.

  NOW I NEED YOUR HELP TO LOCATE THE PROBLEM TO SOLVE IT!
  Thank you in advance.

  Hello

  Just a quick updte on this issue.

  I ended up buying another motherboard (not HP) and installed. But I got problems to start so I reinstalled windows but could not repair startup.

  I did a new install (kkeping my old files in a folder Windows.old). Now reinstall any software I really need and everything works perfectly.

  I activated my license and it worked! Thjat I was afraid of but seems there is nothing to worry about.

  So I'm going to mark it as RESOLVED.

  Thanks to everyone who helped or read this thread!

  Concerning

• Re: Satellite A100-011 does not start, a black screen at the beginning

  I have a Toshiba Satellite A100-011, which is almost 5-6 years. It suddenly started to behave abnormal.

  First of all, I started to get a 1-2 sec black screen when he was running. The screen was on and off occasionally.

  After a few days, I could not started upward from my windows xp sp3 operating system. I tried to start in safe mode with networking to see if I had a few spy, virus or something. I ran avast, hijact, ad-aware and some more, but not found anything.

  Later, I tried to format my laptop with a xp professional, but this time I can't see any reflection that passes more fun running and a black screen. I just got a black screen at the beginning and it does not start.

  I plugged on a television screen, and here I have started. I have re-installed all the drivers and formatted, but all I get is a black screen on my laptop at the beginning.

  What should I do now? Do you think I have a problem with my screen of HW or a driver problem with nvidia geforce go 7600? Maybe I'm missing something?

  Thanks in advance for all replies.

  If you can see the picture on the TV there are a few s laptop display problem. Y at - it some problem connection or display itself.

  You want to fix it yourself? You can disassemble the laptop?
  I mean if you have any experience with this kind of things that you should seek professional help.

• The data read into the buffer HAVE lack samples at the beginning

  I use a box USB-6251. The program implements two channels of AI (read I and Q) on a single task and one channel on another task. The channel uses the ai\SampleClock as its clock, so that both are synchronized. C creates a digital pulse periodic rising edge (a clock basically) which is used as a trigger on an external function generator. The signal from the unit after going through some material, external signal processing is ultimately what is read by the channel of GOT it.

  We know from the relevant signals, they seem to be correctly synchronized scope. IE, the analog signal to read arrived on the channel of the AI of the acquisition of data more or less instananeously when the trigger is activated. If there is a delay, it is of the order of microseconds.

  However, when I read in the buffer of HAVE (repeated FiniteSamples), waveform, I always come back has a section of samples at the beginning that seem to be returned of the first actually read data-point (see attached image). This delay is of the order of milliseconds (it varies with each series).

  I want to totally eliminate this delay. The signal should be a sinusoid which begins to sample 0 and is continuous through until the last sample read.

  I put the code below.

  Installation program:

  Create analog read the task
  
  analogReadTask = new Task ("analogReadTask");
  
  Create the virtual channel for the component I
  
  analogReadTask.AIChannels.CreateVoltageChannel (initParams.AddrI.ChannelAddress, 'I', AITerminalConfiguration.Differential,-4, 4, AIVoltageUnits.Volts);
  Create the virtual channel for the Q component
  
  analogReadTask.AIChannels.CreateVoltageChannel (initParams.AddrQ.ChannelAddress, 'Q', AITerminalConfiguration.Differential,-4, 4, AIVoltageUnits.Volts);
  To set the clock for the analog readings
  
  analogReadTask.Timing.ConfigureSampleClock (string. Empty, initParams.SamplingRateHz, SampleClockActiveEdge.Rising, SampleQuantityMode.FiniteSamples, Totalechantillons);
  Create the mult-channel drive
  
  analogReader = new AnalogMultiChannelReader (analogReadTask.Stream);
  
                  analogReader.SynchronizeCallbacks = false;
  pulseWriterTask = new Task ("pulseWriterTask");
  Creating a digital output channel that provides the trigger to the U/S system
  
  pulseWriterTask.DOChannels.CreateChannel (initParams.AddrUsTrigger.PortLineAddress, "US trigger", ChannelLineGrouping.OneChannelForEachLine ");
  
  pulseWriterTask.Timing.ConfigureSampleClock ("/ SampleClock/AI/Dev1", initParams.SamplingRateHz, SampleClockActiveEdge.Rising, SampleQuantityMode.ContinuousSamples, samplesPerPulse);
  
  pulseWriterTask.Stream.Buffer.OutputBufferSize = samplesPerPulse;
  
  pulseWriterTask.Stream.WriteRegenerationMode = WriteRegenerationMode.AllowRegeneration;
  pulseWriter = new DigitalSingleChannelWriter (pulseWriterTask.Stream);
  pulseWaveform = new DigitalWaveform (samplesPerPulse, 1, DigitalState.ForceDown);
  
  pulseWaveform.Signals [0]. The States [0] = DigitalState.ForceUp;
  analogReadTask.Control (TaskAction.Verify);
  
  pulseWriterTask.Control (TaskAction.Verify);
  
  

  From reading:

  analogReadTask.Start ();
  
  Start writing the digital pulse, however it will not start
  
  until the AI/SampleClock begins, so implicitly synchronizing the two tasks
  
  pulseWriter.WriteWaveform (pulseWaveform, true);
  analogReader.BeginReadWaveform (Totalechantillons, readerCallback, analogReadTask);

  Result (should be a sinusoid from end to end)

  

  Always seems to solve these problems, shortly after their validation.

  The problem has start the digital task AFTER the analog task. In the small delay between the two lines of code running, read analog had already begun, and so some of the impulses of the AI/SampleClock were missed by the task. The order of departure between the two tasks of switching solves the problem.