Start since the. ISO converter can not see paravirtual (or NIC) scsi drives

Similar Questions

• MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

  MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL

  Try this restart your iPhone, iPad or iPod touch - Apple Support

  If this does not work, it may be a hardware problem.

  Hope this helps, good luck to you.

• Updated since 5-5.71 - can not see previous matter

  I upgraded from 5 to 5.71 and now can not see the photos already imported from an external hard drive, they are still on the external hard drive. I'll have to re-import them to see in LR?

  Jeff,

  Do not re - import!

  Most likely, you have created a new catalog. Try the menu file-> open recent and open each catalogue shown here until you find the right one.

  HAL

• When I try to play a CD/DVD it works but it does not open the file, you can not see or hear something

  Cannot get the CD/DVD player to play

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Norton Ghost Recovery - can not see Windows XP VM SCSI & NIC

  Hi, my first post here.

  I have been using Norton Ghost incremental backup sets to backup and restore my Windows machines physical for years and thought this would be a good way to backup my virtual machines as well. I use VMware Player 4.0.1 on 2 x XP, Vista x 1 and 1 x Win7 VMs, backup everything on the network using NG within each virtual computer.

  My problem is that when I boot 2 XP computers virtual from the NG, NG recovery disc has no drivers for the NIC VMware or VMware SCSI so firstly I can't not to backup over the network, and secondly, if I put them on a USB key so that I can see them, NG is not all disks to restore.

  I have not tested a restore on Vista/7 yet but a boot recovery NG sees the network and local drives, so I presume it's specific XP.

  I could create NG recovery disks of in NG on virtual machines, but he does not think VMware drivers are missing, and if that were the case, I can't find them anywhere in the installation of VMware Player/tools to add the disk

  Is it possible to add the VMware drivers to a NG recovery disk so that I can use it or what else exists for backup computer virtual to make it easy to remove files and folders when necessary or to completely rebuild the virtual disks?

  Thanks in advance.

  Now, where on this planet are the NIC drivers?

  Somewhere along the way, VMware has changed its routines of facilities of the pilots in VMware Tools well, while the previously mentioned installation path exists in the particular Windows XP Virtual Machine I looked in however a new installation of the VMware Tools using the "http://softwareupdate.vmware.com/cds/vmw-desktop/player/4.0.1/528992/windows/packages/tools-windows-8.8.1.exe.tar" VMware Tools of the Package Windows Installer of ISO he only created the hgfs under folder «C:\Program VMware Tools\Drivers\» folder

  "However, for the 'VMware Accelerated AMD PCNet Adapter" is installed and who manifest not only by the description of the NIC itself, but also by the presence of an oem*.inf file in the C:\WINDOWS\inf ' folder that contains the installation for her information and the header indicates "vmware - nic.inf.  So you can reverse engineer to be a package from the oem*.inf file or install from a former VMware Tools of Windows ISO Installer bundles like "http://softwareupdate.vmware.com/cds/vmw-desktop/player/3.1.5/491717/windows/packages/tools-windows-8.4.8.exe.tar" will create the folder "C:\Program VMware Tools\Drivers\vmxnet\.

• Cannot start on the screen and can not access early startup options

  Original title: no access "advanced boot options".

  I've had my new Sony Vaio laptop for a little less than two months now, it came preloaded with Windows 8. However this afternoon after startup, I got a blue screen, followed by the message: "repair disk errors. It may take more than an hour to finish '. After less than 10 minutes, it restarted itself, only to start on a black screen with a cursor. When I stop or put it to sleep, it will start ONLY at the back screen after a short while on its loading screen "VAIO". Windows does not make me a "Advanced Boot options" as it should, so I have no access to any system restore, update them or safe mode options.

  The only thing I've been able to think is to ask a Windows 8 install disc my manufacturer because I don't have access to an iso of windows 8 DVD/USB to boot from. Are there other options I can try as I wait to hear from Sony on an installation disk? I am so far not impressed with 8 in all, the system "Advanced Boot options" auto seems ridiculous to me.

  I looked at the options for creating the installation of Windows 8 media, and I have access to another computer running Windows Vista to create this, but I don't have access to a product key of Windows 8, because my Sony notebook came with the operating system pre-installed, and I couldn't find a key product or on the laptop itself , or anywhere in the documentation that accompanies it. For this reason, the Installation of Windows 8 media doesn't seem to be an option for me.

  However I saw a feature on my phone that allows me to start directly on the boot advanced options. an assist beside my power button which, when I hold while the laptop is turned off, starts directly at the menu said.

  Now that I have access to advanced startup options, I tried an auto-recovery, he said was not possible, and I also had the same thing when you attempt a system refresh, so was the only thing I was able to reset to the factory settings.

  I still have no idea what triggered the problem, or why it was not possible for automatic retrieval or update it, however it seems to work fine now that it is restored to factory settings, though not ideal or practical.

• No sound icon by volume in the taskbar. Can not see the box in the Panel... areas are greyed out. has tried windows Fixit... does not solve the problem

  My knowledge is very limited when it comes to computers, and I don't have a clue when it comes to walk through the bios, etc. Can you help me in Re-establishing sound on this computer. I can assure you that your patience will be judged.

  My hard drive has been cleaned and reformatted about three weeks ago, and I have not all sounds now.

  My OS:

  Windows XP - Pro, Version 2002, service pack 3.

  Is the motherboard: Asus M2N - SLI Deluxe

  Graphics card: Nvidia GeForce 7300 SE 7200

  CPU: AMD Athelon 64 X 2 Dual Core 4200 +.

  IDE controllers: ATA/ATAPI

  Standard dual channel PCI IDE Controller GS

  I bought one online drivers scanner / program, identified the drivers missing, downloaded from nvidia and reinstalled. still no sound.

  Upgraded hardware, Device Manager, I see 3 yellow dots to mark:

  1. audio Device on High definition Audio Bus.

  Details; HUHUDIO\FUNC_01 & VEN_11D4 & DEV_198B & SUBSYS_104381F6 & REV_1002\4

  2. properties of the unknown device on PCI Bus.

  Device ID:

  ACPI\ATK0110\1010110

  3 Dell USB Smart card keyboard.

  "Thank God" Friday, December 31, 2010 11:40

  My knowledge is very limited when it comes to computers, and I don't have a clue when it comes to walk through the bios, etc. Can you help me in Re-establishing sound on this computer. I can assure you that your patience will be judged.

  My hard drive has been cleaned and reformatted about three weeks ago, and I have not all sounds now.

  My OS:

  Windows XP - Pro, Version 2002, service pack 3.

  Is the motherboard: Asus M2N - SLI Deluxe

  Graphics card: Nvidia GeForce 7300 SE 7200

  CPU: AMD Athelon 64 X 2 Dual Core 4200 +.

  IDE controllers: ATA/ATAPI

  Standard dual channel PCI IDE Controller GS

  I bought one online drivers scanner / program, identified the drivers missing, downloaded from nvidia and reinstalled. still no sound.

  Upgraded hardware, Device Manager, I see 3 yellow dots to mark:

  1. audio Device on High definition Audio Bus.

  Details; HUHUDIO\FUNC_01 & VEN_11D4 & DEV_198B & SUBSYS_104381F6 & REV_1002\4

  2. properties of the unknown device on PCI Bus.

  Device ID:

  ACPI\ATK0110\1010110

  3 Dell USB Smart card keyboard.

  Go to this page and download the drivers for your motherboard:

  http://www.ASUS.com/product.aspx?P_ID=szSFtrap7crpBaQE

  --

  Roy Smith
  Windows 7 Professional
  Postbox 2.1.0
  Tuesday, January 4, 2011 22:09:51

• HP LaserJet p3005n: HP laserjet p3005n needs to rest of the plant but can not see the screen

  I have a HP Laserjet p3005n printer which is stuck in a manual IP configuration and I need to be automatic. To make matters worse so broken screen I don't see menus. I'm also currently in a place out just a new buying is not an option. I managed to find a way to print the configuration files (Menu Down Down Down CONTROL) that allows me to check things out. I was wondering if someone can give the exact configuration of button to do a reset to factory or the exact key combination to change the IP config on auto. Any help would be greatly appreciated. Thank you in advance!

  OK, which means the down arrow once is not reset cold, it was to turn the onboard lan. Repeat the process and it should bring back the network. Then do it again, but the press down twice instead of once, and then click the OK button.

• Windows7 home group sharing printers displays error 0 x 00000001, PC to join the Group House can not see shared printers but can see and share all files between the computers in the home group

  This issue just started about 4 days after years of good impression on the computers in the homegroup.  Nothing I know came to start this problem.

  Printers cannot be seen by the remote PC that needs to connect to printers via homegroup.  Printers, 2, a laser and the other color ink jet, showed both on the remote PC called but also showed "offline", I tried to find ways to put on line, but nothing could fill this function. I read a suggestion that I should remove the printer and then recharge it.  I removed the printer and is where I found that I couldn't see the printer on the network of homegroup to reload.

  I rebooted the bridge and the two PCs and turned off the firewall and virus protection software and closed the Group residential and the recreated homegroup and pretty much any other start-up base and installation process you can think, and nothing gets my functional printers through the remote PC.  I even physically removed one of the printers of the main PC and deleted the software and then reconnected and recharged and have made sure I have the latest drivers and it made no difference at all.

  Hello

  post here for better support:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

• WUMC710 connected to the router, but can not see internet

  My media WUMC710 connector on my router Netgear Nighthawk AC1900 double band on the first try.  Can see the MAC address in the connected devices list when you are connected to the router.  However, the devices connected to the WUMC710 cannot connect to the internet.  Tried TV, Blue-Ray and laptop.  All other devices on the wireless network properly.

  What is the problem?

  Fixed a problem with the update of the firmware of the router.  WUMC710 works great!

• The sys user can not see tables belonging to the other schema

  Hello

  We have a database used to store the metadata of the soa suite, yesterday, we asked to grant select on certain tables of the prodsoa_bam schema, but we found this sys cannot see the tables of prodsoa_bam.

  If we question dba_tables we can list the tables of prodsoa_bam, but if we execute a query on the tables that we get an ORA-00942 error.

  Someone suggested a work around?

  Kind regards.

  try using double quotes. It seems that your table name is case-sensitive (which I do like):

  SELECT COUNT (*) FROM PRODSOA_ORABAM. SysIterPrivilege ';

• Try to add the hard file to the inventory, but can not see the file

  I am trying to add a hard file that someone gave me to my inventory.  I have already downloaded the file of the VM containing the hard file in my data store.  Now, I want to have it in my inventory.  I tried to add a new virtual machine, go to the custom configuration, and then when I get to "Select a disk", I take the "use an existing virtual disk".  I sail in my data store and to see the folder of the virtual machine, but inside there is nothing! There is no hard file, but I know that it IS when I just browse the data of the Summary tab store.  What is going on?  Thank you.

  If you have an OVF, open the vSphere Client and select "Import" in the "File" menu to import the OVF. This should create a complete virtual machine for you.

  André

• Windows 7 Pro Backup can not see my USB external hard drive.

  This seems to be an old problem, maybe someone has a solution:

  I have a Toshiba 150 GB NTFS USB 2.0 external hard drive I used as backup when I had XP, but now I have W7 Pro 64-bit (SP1), and the backup program is unable to see the player.

  It shows in Explorer, it works very well, has write permission, but is not in the list of Backup Options.

  Player is 18 months old. W7 found and installed the USB driver for it.

  It is wired, I don't have a network.

  In addition, Windows cannot format the drive.

  I changed the drive letter of that W7, named F to Z, no go.  All I see in the backup is C and the DVD player.

  It has been suggested that I have uninstall all the drivers USB and reboot and let Windows reload them, but I have a keyboard and a mouse USB, so if I do that has no way to control the computer.

  How can I make the visible external drive for the backup program? Any help is appreciated.

  I use Ghost on my 8 month, Toshiba Satellite L755 and have never seen a conflict.  I also have it on 3 desktop computers.  For antivirus I use AVG free on 3 systems, Symantec SEP on that and Norton Security Suite on the laptop (which I get for free from Comcast).  The only thing related to security, I see in the menu start from Ghost 15 is a small window to give people access to Ghost.  He also built in the feature called Threatcon, which I've never had any message of.  Here's the info of the construction in the help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  On Symantec ThreatCon

  ThreatCon is threat of Symantec early warning security system. When Symantec identifies various threats, the ThreatCon team adjusts the level of threat. This adjustment gives people and adequate warning systems to protect against attacks and data systems.

  When you activate the trigger of Symantec ThreatCon to a selected backup job, Norton Ghost detects changes in the threat level. Your computer must be connected to the Internet, at the time. If the ThreatCon level is reached or exceeded, the backup operation in which you have enabled Symantec ThreatCon is started automatically. You have then a recovery point to use to recover your data to your computer should become affected by the latest threat.

  Note:

  If your computer is not online, then it is not sensitive to online threats. But if you connect your computer to the Internet at any time, it becomes vulnerable. You don't have to enable or Disable Symantec ThreatCon when you go on or off line. Works if you're online, it doesn't matter if you're offline.

  For more information about Symantec ThreatCon, visit http://www.symantec.com.

  ~~~~~~~~~~~~~~~

  Good luck.

• How can I copy files/sub-sub-sub-folders in Icloud on MacBook? Since the upgrade to Sierra, I see all of my folders in icloud but not on my Mac.  Thanks - David

  How can I copy files/sub-sub-sub-folders in Icloud on MacBook? Since the upgrade to Sierra, I see all of my folders (with documentation) in icloud but not on my Mac.  Thanks - David

  Turn off the power of optimized storage and copy the files to your Mac.

  1. Click on the Apple icon in the upper left corner of your screen.
  2. Select has about this Mac from the menu drop down.

  3. click on the tab for storage in the system information window.

  4. click on manage the...

  

  5 disable the storage element optimize.

• I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

  I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

  Hi debg25514049,

  You will not be able to export your PDF to PPT using the service Adobe export in PDF format.

  You'll need subscription to pack Adobe PDF or the Acrobat application to convert PDF to PPT.

  Kind regards
  Nicos