Start slow c8180 printer

Similar Questions

• OfficeJet Pro 8600 +: OfficeJet Pro 8600 + very slow to print

  We recently purchased a new MacBook.  From the beginning on this MacBook, our HP 8600 printer takes long time to start an extremetly to print.  Sometimes it prints ever.  The printer is set up wireless.  Sometimes the print area will say that is having problems connecting to the printer, but not always.

  This only happens on this MaxBook.  I have an iMac and a Windows laptop, both connect to the same wireless printer.  Both of these printing devices print jobs fairly quickly.

  I downloaded the new drivers.  Uninstalled and reinstalled the printer.  Restarted the printer and wireless access point.  Disabled iPV6.

  Don't know what else to try.

  Hi @JH99,

  Welcome to the HP Forums!

  I noticed that your HP Officejet pro 8600 is slow to print on a wireless connection, with your Mac. I'm happy to help you!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know the results. Although the guide title does not match your question, I think that these steps will help.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Thank you for posting!

• C8180: C8180 prints but nothing on the page

  I feel and the printer works correctly, as is printing the page, but once completed, there is no ink on the paper.  Any offer of cartridges are good and replaced the black is new.

  Welcome to the HP community @albeland,

  I understand that your HP Photosmart C8180 prints blank pages. I'll be happy to help you.

  Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

• Satellite Pro A120 cannot start when the printer is connected

  Hi I have a brand new Toshiba Satellite Pro A120 but I'm having a very strange problem.

  I installed my printer - Epson Stylus Photo R300, but now the laptop will not start if the printer is on. When I turn it on the Toshiba screen comes ok, then the Windows XP screen comes with the black background when the blue bar to cross to load Windows but its all disappear and the laptop just hangs and will not!

  However, if you turn the printer off and turn the laptop it starts up fine!

  Its really the printer which is the cause as its only when I turned it on.

  It's never caused this problem with my old PC using Windows XP too.

  Any help with a resolution would be greatly appreicated.

  Thank you

  Adam.

  How to disconnect the printer during the boot process? ;)

• Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

  Open a book, tap, tap of he two, disable auto-nuit theme.

  

• at the start of the printer is offline and before you print anything,.

  want to start line printer, how do I?

  for some reason any (computer grimilins) at the start of the printer is offline and before to print anything, I have to go through the assets click Start-control-printer/fax-rt and click that the printer off line reviews and the thing will print.  and never to what I stopped and then all over again.  surly, there is a way to put these at the start, that it comes online, it's a hpmedia M7467c HP xp and printer is a HPoffficejet pro 8500.  This condition exists sense any solutions thank you, we installed the 8500

  Hello

  I suggest to refer to this link and follow the instructions in the link below and check, if this can help:

  http://support.Microsoft.com/kb/308028

  It will be useful.

• I have a HP Photosmart C8180 printer on the printer screen it displays C2FF8575.

  I have a HP Photosmart C8180 printer.  On the printer screen, it displays C2FF8575.  It won't turn off, unless I unplug islet that my Undo button keeps flashing. What does all this mean?

  The code of C2FF8575 refers to a fatal mistake in the firmware of the printer. The only thing you can do when this error is a hard reset. I will include the instructions below. If this does not work, you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• Envy 4500: Envy very slow to print 4500

  I have a craving for 4500 and it takes several minutes to print a single page.  The status bar indicates it is connected to the computer and the bar moves that printing takes place, but it's really slow!  Any suggestions?  I have a Macbook with OS X Yosemite.

  Welcome to the HP community @tsuzannenc,

  I've read about problems you encounter with your printing is slow, when printing from your Mac running 10.10, and I wanted to tender hand to try to help outs! Before you begin, try to make a copy or two in front of your desire to 4500. If copies are too slow, try a reset of the power and try to reproduce again. If the copies to work correctly, go to the procedure below.

  Reset the power supply:

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please, try the following steps in the order and try to print again to edit text.

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click here to download and install the complete driver: HP ENVY 4500 series full feature software and drivers
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers

  Good luck!

• 7510 slow to print printer

  My new HP Photosmart 7510 is extremely slow to print.  Way slower than the 6510.  Why is this?  On my computer it shows often feel to the "idle"... forever.  Is just like that?

  Thanks for any thoughts.

  Pat

  The signal strength of the wireless connection may play a role in the speed at which the printer can print the job. Also devices that use the same frequency (GHz) than the printer can interfere with speed such as cordless phones, microwave ovens etc.  I check the distance from the router to the printer and make sure that they are not too far apart.  Here is a document that will slow printing when using MAC operating systems.  In this way, you can use this document to address questions on the side of the computer.

• Get the error that says I have to start the local print spooler. How do I do that?

  Original title: laptop computer Dell

  When I try to print I get a message saying that I need to start the local print spooler - now what should I do
  ?

  Click on the Start button--->run--->Type "services.msc"---> clickOK. ' " Scroll to the bottom for the ' print spooler service"and if it is not in the started state, right-click and select Properties." Click the option button to start the service and also make sure that the Startup type is set to automatic.

  Good luck.

• Officejet 5610 starts slow printing and button / stop flashes

  This just started happening.  A document (no matter what I print) will begin to print, get the first two lines printed and then take incredibly slow.  Meanwhile, the power LED flashes and the message says "print...". "If I restart my computer and as you turn the printer power on and off, it will correct itself.  Anyone else have this or know what to do?  Thank you

  Looks like the printer can be connected to a surge protector and the surge protector can not provide the stream of electricity the printer needs since it starts then slows down and the power LED flashes.

  The printer is connected to a surge protector?  If so, plug it directly into a wall socket.  If it's related to the surge, the question shouldn't be present.

  Let me know what happens.

• SETTING C8180 PRINTER FOR DESKTOP (WIRED) AND ALSO FOR LAPTOP WIRELESS

  I have a C8180 already hooked up to my counter top that works very well.  I brought a HP dv7-3173nr laptop that is running Windows 7 and I want to add so that I can also print on the same wireless printer. Bottom line I'll have two PC to the printer, printing via the USB cable, and a wireless.  I am fairly new to these things, so if possible make it easy for me to understand, if you PLEASE.  I use a router e2000 NETSYS

  Ben

  Assuming that both of your computers are connected to your router, your best option is to connect the printer to the router for all to use.  If you do what you propose, you will only be able to share printing with your new PC laptop and it is difficult to do.

  Read starting on page 33 of the Manual on how to connect your printer to your router.  Basically, connect you to your router via the front of the printer (wireless configuration wizard), then load the software on your PC (from here) by following the instructions for installation "through the network".

• Firefox starts slow, but works well in safe mode with all the running addons - why?

  Then... all of a sudden my Firefox (v. 38.0.1) is really laggy, with slow-to-respond buttons, scrolling etc. So I manually disable all addons, but nothing helped. Then I try safe mode and it works very well. Large. So I turn on my addons again one by one, until they are all allowed and it still works fine. My conclusion: it isn't the addons. What is what is the cause? I have updated all my addons and just Silverlight, Flash, Google updater, Shockwave and some others.
  One solution would be for this mode - Safe with addons running - being my default start mode, but I can't work out how to do it. Is no huge problem because I can make Firefox work perfectly, but it's a little bit of your time.
  Any ideas?

  Hi RufusWalker, please see if Firefox is slow after upgrading to Firefox 38 covers and solves your problem.

• Start slow time 700-25ISH 90ED

  I just bought a 700-25ISH Ideacentre 90ED

  I installed a samsung SSD 850 evo but boot time seems far too slow for this kind of machine spec

  I tried both legacy and UEFI but there is very little difference, actually start legacy is actually faster that shouldn't be the case that it should be faster in UEFI

  Turn on the quick start in windows made zero difference is he should do, it's just take 10 times longer to stop without increase in boot speed

  My old dell vostro 470 with the same type of SSD starts in about 10 seconds, but this machine takes about 30 seconds

  Just doesn't seem right to me that what should be a much faster pc takes 3 times as long to start something 4 years, this is supposed to be an upgrade!

  10 64-bit windows running and installed clean in order to avoid all the bloatware etc.

  When it is up and running it is fine, all this support almost instantly as you imagine starting an SSD is just starting the time I don't understand

  problem solved after doing some logical thinking

  SATA controller has been installed with the windows base driver only

  Lenovo does not provide fast storage Setup intel on the support section of the site (don't know why)

  I managed to find on the site of Hp after doing a bit of research to find a machine with the same chipset

  Installed the driver for the SATA controller and hey presto!

  Now start as I expected, fast boot works now (boot up in 6 seconds press the button I kid you not) still do not use quick start, it takes more than one minute to close

  Someone should really get this driver on the site, I noticed that even the original stored on the HARD disk image does not use it and it makes a huge difference for startup speed, he literally cut in two

• HP c8180 printer problems

  I get a message telling me that my C8180 hp magenta print cartridge is empty, even after installing a new cartridge. The message indicates its empty and I can't

  printing color. To verify said O.K. levels ink levels When I try to print colors, I always get the message trlling me, it's my cartridge magebta

  empty. I tried cleaning the contacts of the cartridge. I tried two new cartridges hp with the same results. Now what?.

  Hello

  Contact HP

  and also use troubleshooting, manuals, etc. the link for your printer below model

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3204788&LC=en&cc=us&DLC=en&lang=en&tmp_track_link=ot_we/prodlink/en_US/3204788/loc:0 & cc = us

  and try the HP Forums

  http://h30434.www3.HP.com/