Start the Virtual Machine and stop Option

Similar Questions

• Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

  Hello

  See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.

  If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately

  Tried add/remove the NIC of the model

  Tried to move the comments on different hosts

  Tried to create a new template from scratch

  NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.

  Anyone seen this before?

  I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)

• Unable to start the virtual machine and snapshots are missing from snapshot Manager.

  Hello

  I'm new here in the VMWARE communities and I don't know if I'm posting this survey in the right place. I am currently using VMWARE Workstation 9. The issue I'm having is that I can not start my VM. The error that says:

  

  This is an overview of my settings:

  

  When I try to get a snapshot I can go back, I get this snapshot Manager screen:

  

  I checked the files on the directory of the virtual machine. The snapshot files are still there.

  I tried to solve the problem by editing the configuration of virtual machine file to use another vmdk. I got an error saying something about the parent and the child are not synchronized. Sorry I don't have a screenshot of that. I also tried to make a copy of one of the other VMDK and rename it to match with the name of the missing file. That also made me anywhere I tried looking on the net but I get answers to other vmware ESXi and vSphere products. So I don't know if they apply to my current situation.

  At this point, I'm hoping to recover my machine or at least be able to use snapshots. Please notify.

  I think that the restoration was the best way to solve this problem. I actually checked the different files, but it looks like I missed something. In any case, create snapshots with the virtual machine in a state engine is my personal preference. It is not only to save disk space (since there is no need to preserve the current state of memory), but also provides a consistent state. As for the number of snapshots, you're always on the stop side, and if you are not having issue of performace with small changes you make you should be ok. In case there is a performance problem, you may consider to store the computer virtual on an SSD that will certainly help.

  Since the Center of Documentation of VMware Workstation 10

  To the premises of the virtual machines, you can take more than 100 snapshots for each linear process. For shared virtual computers and remote, you can take a maximum of 31 snapshots for each linear process.

  André

  Post edited by: a.p. corrected fault, "SSD" instead of "SD".

• Avalibale features in the free ESXi version - auto start the virtual machine and scripts shoutdown?

  Hey all,.

  Evaluating 60A expired on my ESXi (5.0.0.623860) host which runs a couple of virtual machines. Virtual machines have been setup to autostart when the host said, but now the assessment is complete, the virtual machine no longer autostart.

  In addition, I ran a simple scipt using PowerCLI. This was shot issue a stop host command, which in turn stop the gracfully VMs, then stop the host: the script command were:

  Connect-VIServer -server mysESXiHost -User root -Password xxxxxxx
  Stop-VMHost mysESXiHost -Confirm:$false -force
  

  If I run these commands from the PowerCLI confirmation, I see the following error message:

  Stop-VMHost : 08/12/2012 17:01:52    Stop-VMHost        fault.RestrictedVersion
  .summary
  At line:1 char:12
  + Stop-VMHost <<<<  mysESXiHost -Confirm:$false -force
      + CategoryInfo          : NotSpecified: (:) [Stop-VMHost], RestrictedVersi
     on
      + FullyQualifiedErrorId : Client20_VmHostServiceImpl_ShutdownVmHost_ViErro
     r,VMware.VimAutomation.ViCore.Cmdlets.Commands.StopVMHost
  

  What I read, I thought that current same ESXi of execution in the free license must always let these things happen, or am I wrong?

  Chris

  There are two things to note:

  (1) the fault of . RestrictedVersion.summary details can be found here http://www.virtuallyghetto.com/2011/06/dreaded-faultrestrictedversionsummary.html

  (2) regarding Auto Start, fairytale look here http://blogs.vmware.com/vsphere/2012/07/clarification-on-the-auto-start-issues-in-vsphere-51-update-1.html

• IP not set to start the virtual machine

  Environment: ESX 4 server, hosting VMware Studio 2.0 (final version), will deploy device created in the same ESX host.

  -

  ---

  I was not yet able to determine if my wait will not, but I expected that my VM would be marketing it would have an assigned IP address already if I finish the network settings section in the build settings. But when I start my VM, it starts with IP = 0.0.0.0.

  I'm going to network Type = static and by filling in all the details for the IP, mask subnet, gateway, DNS 1 and 2. It seems that they are used when the virtual machine is in 'construction' on the host, but I'm not entirely sure about this.

  In the OVF IP assignment settings, I tried selecting OVF environment, but have not set of OVF properties (I don't think that this should be mandatory if I am already addressing in the build settings).

  After construction, into my vSphere Client (ESX4), I chose the file & gt; Deploy the template OVF... & gt; Deploy from URL and paste the URL of the virtual machine built recently. I start the virtual machine and watch the console screen boot and load the operating system. IP address is never assigned and the console device is displayed with IP = 0.0.0.0.

  I then have to connect with the image, manually assign the IP settings and then everything works. I expect this happen at boot time so that my firstbootscript can take advantage of the assigned IP address.

  -

  ---

  Maybe I go about it the wrong way, but my usecase is as follows:

  Build a VM & gt; Distribute the VM on end user & gt;  end user deploys on ESX and chooses address IP & gt; end user boots VM for the first time & gt; firstbootscript runs automatically

  Am I missing something? Can I have different expectations about how IP assignment is supposed to work? I read about IP Pools, but this isn't an option in my vSphere Client.

  Property of the FVO is the best option to set an IP address.

  Long back for Linux OS, I have written a shell script to set the IP address and the hostname in firstboot Virginia you can try this for your going here is the link for the same thing.

  http://communities.VMware.com/docs/doc-10953

  In the OS from VMware Studio tab you can paste this script in the script firstboot.

  First of all, please run this script manually and then use it in VMware Studio firstboot.

• I get an error "the disk hard virtual parent is in a saved state. Discard the saved state or stop the virtual machine and try again. "during the installation of XP mode.

  I have Win7 Pro SP1 x 64.  I downloaded WindowsXPMode_en - us.exe (from Microsoft downloads) and run it.  The installation seems to work OK (I've specified a different location for the parent virtual hard disk file).  Then, installation happening and I provide the information requested (name of user and password for the XP Mode), updates Windows and OK to the issue of sharing.  The installation program then reports the following error:

  The disk hard virtual parent is in a saved state.  Discard the saved state or stop the virtual machine and try again.

  I get the error even if I try manually configure XP Mode (use the Setup Wizard).  I downloaded the installer XPMode (3 times) and reinstalled several times, always with the same result.  If it helps, I can't locate anywhere .vsv file.

  Any idea what's going on?

  Original title: XP Mode Setup error

  Hi smithnr10,

   

   

  You must post your question in the TechNet forums because it caters to an audience of it professionals.

  To do this, you must consult the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

   

  Hope this helps!

• ZPrint accident of process before starting the virtual machine

  I see the following messages in system.log everytime my Windows VM starts. These accidents zprint apparently never happened before today. There is no previous accident for zprint report. The messages below always repeat 3 times before other messages on VM, commissioning.

  09/02/15 21:20:33... Report of incidents ReportCrash [7538] advice for zprint processes [7537]

  09/02/15 21:20:33... ReportCrash [7538] error saved crashreport to /Library/Logs/CrashReporter/zprint_2015-02-09-212033_...crash using uid: gid 0: 0, euid: egid 0: 0

  Extract from the report of crash:

  Exception type: EXC_ARITHMETIC (SIGFPE)

  Exception codes: EXC_I386_DIV (division by zero)

  Why the merger issues the command zprint? If she has always done so before, why is zprint now blocking?

  (If I run the terminal zprint command without specifying the name of the area it blocks the same way.)

  Anyone have any ideas?

  Some things that I did today that might be important:

  My Mac Pro locked up while I was running Firefox (open Youtube and Yahoo pages).  I pushed the power button / stop. The virtual Windows machine was running at the time.

  After restarting the Mac Pro, when I tried to start the virtual machine, I got the message: "... vmdk has one or more internal errors that cannot be repaired. The only option is to restore from a backup copy of this disk... »

  So I renamed the corrupt VM bundle, then drag-and - drop copied all of the virtual machine to a backup volume.

  When I started the virtual machine restored, I noticed the crash zprint above messages.

  Thank you!

  OS X 10.5.8, Fusion 3.1.4

  Fusion uses zprint to internal information of the kernel which are very difficult to obtain by other means.

  Given how long it has been since OS X 10.5.8 or Fusion 3.1.4 were changed, either something has been corrupted or something has changed in the system environment for that to happen early.  I can't find any other references to zprint triggering a SIGFPE anywhere else on the Internet...

  If you do not already done, I highly recommend running disk utility and check (and possibly repair) the disks of your host before doing anything else.

  See you soon,.

  --

  Darius

• Cannot start the virtual machine after you create snapshop

  I found a strange behaviour. I have a Windows 2008 guest that I just copied in my new box ESXi. I am trying to create a snapshot before upgrading the guest to 2012 Windows operating system. The virtual machine has currently no snapshots. Whenever I have create a snapshot, he succeeds, but then I can't start the virtual machine saying that it does not find the vmdk file delta even though I see there in the data store. In order to start the virtual machine, I have to delete the inventory and it readd, but then I lose the snapshot. I also have another computer virtual running Windows 8.1 that does exactly the same thing. How can I create snapshots safely without damaging the virtual machine? I also tried to create the snapshot while the virtual machine has been activated but that makes crashing and then it does not start again, so I have to repeat the process to remove the inventory and it time. Frustrating. See the screenshots, I have attached.

  Once these virtual machines have been in Hyper-V in the past and I just convert to VMware format using the StarWind V2V converter.

  Yes, for an ESXi host and target you must either select the ESX f.vmdk as format target (growable option is for VMware Workstation), or you must convert the virtual machine once more instead of simply upload the files to an ESXi host.

  André

• Connect physical hard disks to the virtual machine (and leave the data intact)

  Hello

  I'm looking to virtualize a SOHO headless server, that I use mainly for secure file storage.

  Currently, the system runs Linux installed on a small disc and has two drives 1.5 TB, used exclusively for data, in a cluster of ZFS mirroring. (I use the ZFS-fuse Linux-based application).

  I want virtualization for two reasons. One is to make administration easier and safer - avoid having to connect a keyboard and the physical monitor to the box from time to time. The other is that the machine is a bit more powerful to handle the load, and I'm hoping to make it work on other, more challenging tasks.

  Now, there is a catch. These discs are as highly important. I mean the data on them. What I need is to convert the current Linux system to a virtual machine, or re - install Linux on a virtual machine (don't like that), then connect the physical disks to the virtual machine as if they were actually connected.

  I certainly don't want to vmware touches those disks somehow.

  I've read the documentation, but I'm a noob when it comes to server virtualization and system engineering and don't quite understand if this is possible or not. These discs are not a SAN, they are physically connected to the server, I want to install vSphere on. (Of course, I'll log out when I run the setup of vSphere. But I need plug them again later, and they need to be sure that vmware will leave them alone and pass them to the virtual machine transparent.)

  Sigmoid wrote:

  Oh yes, the cluster mirrored ZFS. It is essentially a software RAID type thingie.

  http://en.Wikipedia.org/wiki/ZFS

  A material, or the point of view of virtualization, it appears two hard drives with a single huge partition on each that is not transparent to anyone, except the implementation of ZFS.

  OK, means that you can break the RAID, connect the drives to different host and configure RAID once again, right?

  Let's do it this way

  1. We will need a disc player more for VM, cause on flash, we install ESXi
  2. I will share ZFS :-), all you need to do with that before you install ESXi
  3. make the BACKUP!
  4. Disconnect the data host drives
  5. install ESXi 4.1 U1 free version on flash
  6. Download the site VMware vSphere client
  7. Connect the VM disk to ESXi
  8. customer help create the virtual machine and install the OS on it
  9. stop the virtual machine and esxi
  10. connect DATA drives to the ESXi host
  11. begin to ESXi
  12. See how to add RDM on youtube, after client use, change first hardware VM--> add a new hard disk--> choose Raw Device Mapping--> (physical or virtual) mode--> store it with folder VM - FACT
  13. Start the virtual machine, now your VM should see both drives, with good data course :-)

  I have just made this procedure (add ROW with data in Linux VM) on ubuntu VM, works well

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Could not start the virtual machine: "the specified file is not a virtual disk.

  Hi, I have a problem from a guest vm-workstation.

  Details below - I've done some reading here for some other "the file specified."

  is

  not a virtual disk' messages and I suspect that I am out of luck

  but I have

  wanted to ask just in case there was something miss me

  Here I tried to gather records / logs that other threads

  mentioned - I

  Welcome to all the tips on the revival of the guest, or a

  pointer to a how-to on recovering the files of a given snapshot.

  Thank you

  John

  Summary:

  VMware workstation: 7.0.1 build 227600

  host of os: Vista sp2, 64-bit

  (16 GB of ram)

  guest operating system: sles10 sp2 64-bit (4 GB ram)

  the virtual machine folder:

  drive eSATA (samsung 320, blacx attachment)

  symptom: guest vm

  does not start: says "the specified file is not a virtual disk.

  history: this particular comments works fine; I've done about 30 shots

  during the last 2 months.  The guest is not a copy - even if she did start life as a full-clone

  another linux-client with or without an operating system installed.  In any case, I've used it to very good

  effect for 2 months now.

  So last night I wanted to power off of the host, while I lived my usual steps:

  (1) stop my os of burst (# shutdown - h now)

  (2) even worksation vmware (file - & gt; exit)

  (3) stop start vista (not "suspend" but the real stop turn off the power).

  (4) visa bluescreened.  Now she is doing this every so often, so I thought that it would be

  a big deal.

  (5) this morning I tried to turn on the virtual machine and I got the 'not a virtual disk' error.

  My best guess at this point is the bluescreen stopped some write cache to be

  flushed to disk.  The funny thing is, after the previous bluescreens 3 or 4, the

  Comments to restart without a hitch.

  shrug In any case, just to be weave, I disabled write Vista for outside cache

  device (set to security policy / deletion in Device Manager).  Seems smarter to

  an external device.

  Spare part

  Attached is a file cant_start.zip (191KO) containing:

  dircontents.txt - directory of the client's file listing
  sles10_sp2. NVRAM
  sles10_sp2.vmsd
  sles10_sp2.vmx
  sles10_sp2.vmxf
  VMware.log - other requests asked for *.log files, so I thought
  VMware - 0.log - I should send him these as well.
  VMware - 1.log
  VMware - 2.log
  \ui-logs - 2 IU-logs from C:\Users\jgreve\AppData\Local\Temp\vmware-jgreve
  \vmdk_files - subdirectory of *.vmdk files, light, & can be useful
  -end-

  I checked the VMDK and newspapers - and the VMDK all look great.

  Last departure also seems to succeed?

  As it seems that instant 36 is not used so far - I was just going to throw it away and try again.

  To do this, you would change the line vmx file

  scsi0:0. FileName = 'suse11.2_x64 - cl1 - 000036.vmdk.

  TO

  scsi0:0. FileName = 'suse11.2_x64 - cl1 - 000035.vmdk.

  and then try to restart the virtual machine. If that works then remove all the

  suse11.2_x64 - cl1 - 000036-* files

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Trouble entering the Configuration Page of the BIOS to start the virtual machine by key pressing (F2).

  To start the virtual machine guest OS (Win XP), I want to enter BIOS, by key configuration page by pressing "F2", to change the order of boot options.

  But the initial startup if page flashes quickly, so that I don't get time to press 'F2', most of the time.

  The problem is exasperated because my press F2 is not taken initially without first mouse clicking, somehere in the start page.

  So the order of actions is

  b click the mouse on the settings window, so as he prepares to receive the keystrokes.

  (b) and press 'F2 '.

  Before these two actions are completed, pages flashes by so quickly.

  Anyone can suggest a quick and easy solution for this?

  concerning

  Note: don't know if it is the appropriate forum category.

  + I also not my button "Start a new Discussion" in the General category page? +

  Hello.

  You can manually edit the. VMX file to the virtual machine and add the following line:

  bios.bootDelay = "5000".

  for a period of 5 seconds.

  Good luck!

• Unable to start the virtual machine after restoration

  Guests including Test host: ESXi 5.1.0.1065491

  Vm problem: 32-bit, Server 2003

  I use Veeam Backup & Restore 6.5 to back up my vm.  I always do a test restore to ensure that my backups are good.  I'm having a problem with a restore.  The 32-bit Server 2003 vm starts just fine on the main host it runs on.  All the vm are 64-bit except for one who is a 32-bit Server 2003 vm.  Restoring the machine virtual and implemented on a host except the 32-Bit vm Server 2003 test.  After restoration and trying power to the top, I get the following error:

  Unable to start the virtual machine.

  Turn on VPCM module has failed.

  Viewed performance counters require version 3 or greater of architectural performance monitoring.

  Anyone know if there is a fix for this problem?

  TIA,

  Mux

  I assume you are using different hardware (CPUs, the BIOS settings) for VMS restored!

  The virtual machine has VPCM enabled, which causes the problem. You can either disable it in vSphere Web Client (you can do this in the vSphere Client Windows), or directly modify the .vmx VM by setting vpmc.enable to "FALSE".

  For how toggle this setting in the Web Client see allow virtual in the Web Client vSphere CPU Performance counters. If you want to edit the .vmx file manually, you need to delete/re-add the VM from the inventory or recharge (see http://kb.vmware.com/kb/1026043)

  André

• Cannot start the virtual machine in a HA cluster

  I installed a HA cluster with 2 hosts configured in it.

  I disabled the admission on the cluster control.

  Each host is a Dell Dimension 9150 with 2.8 GHz CPU and 2 GB of memory.

  I created a virtual machine on a host with 1 vCPU and 512 MB memory.

  However when I try to start the virtual machine, I see the task of 'Power on a virtual machine' fail with the status "the host has sufficient memory resources to satisfy the reserve."

  Why this is happening and how do after that?

  You have the minimum RAM required by ESX ESX 4.0.

  Add more RAM to play also some virtual machines.

  André

• Unable to start the virtual machine after Migration - ESXi hosts

  Last night I wanted to move a virtual machine to a host of test to a production cluster.  All hosts (test and production) have shared access to the same LUN, so I usually am able to simply remove the virtual machines of the inventory in the test environment and add them to the production environment by accessing the .vmx on the data store file.  Two of the 3 hosts migrate perfectly and are running in the production environment.  However, the third server, while the migration starts.

  First he gave me errors that it was missing some files.  The only thing I did was different to rename the folder for the virtual machine on the data store.  It was called 'New Virtual Machine' for a reason, so I renamed it to "Antivirus."  However, something strange happened.  Instead of renaming the folder, it seems was created a new folder named "Antivirus" and the old folder 'New Virtual Machine' was still there.  In addition, the renamed folder 'Antivirus' had only SOME of the files needed.  So I just copied from the old folder in the folder "Antivirus" and he hung up the virtual disk of 20 GB file.  So I closed the VI client and checked the vdmk 20 GB folder and back this morning is in the folder with other files.  However, when I try to start the virtual machine, I get the "cannot access a file because it is locked" error message.

  I've done some detective and I noticed that in my second datastore where was the other folder vdmk, the file was now .40kB in size.  Looks like I've lost my other vdmk folder.  What happens here?

  It looks that the virtual machine was still running when you tried to change the name, so the old folder could not be renamed because of the lock. That's why a new folder has been created instead, and why your vm hung on the vmdk file until the lock has been released. Don't know what happened to the 2nd vmdk file, but the file vmware.log in virtual machine directory must have some info as to why does not start the virtual machine. If the 2nd vmdk is gone, this might be a reason.

  -KjB

  VMware vExpert

  Post edited by: kjb007: changed vm in vmdk

• Get the IP of the virtual machine and MAC

  Hello

  I'm trying to get the IP of the virtual machine and the MAC one of my data centers.

  When I run that the following script two things happen:

  1. I don't see a vm in the output of the csv file.

  2. when I send the output to the quick PowrCLI I see only a mac and one IP address for virtual machines with network cards.

  Script

  ---------

  $MV = Get-Data Center $DC | Get-vmhost | Get - VM

  {foreach ($VM to $VMs)

  $VMx = get-view $VM.ID

  $HW = $VMx.guest.net

  foreach ($dev to $HW)

  {

  foreach ($ip in $dev.ipaddress)

  {

  $dev | Select

  @{Name = 'Name'; {Expression = {$vm.name}}.

  @{Name = 'IP address'; Expression is {$ip}},

  @{Name = 'MAC'; {Expression = {$dev.macaddress}} |

  Export-CSV VM - IP - Info.csv - NoTypeInfo

  }

  }

  }

  My console output, tested on a virtual machine with two external network cards and an internal interface "dummy".

  Name                               IP                                  MAC

  ----                                   --                                    ---

  VM1 192.168.1.1 00:50:56:xx:xx:xx

  VM1 192.168.2.1 00:50:56:xx:xx:xx

  VM1 192.x.x.xxx xx

  You see the addresses expected in summary using vSphere Client VM?

  Oh sorry, I forgot the PS 3.0 requirement.

  You can put all the entries in a table and export all at the end of the script.

  $out = @)
  $VMs = get-data center $DC | Get-vmhost | Get - VM
  {foreach ($VM to $VMs)
  $VMx = get-view $VM.ID
  $HW = $VMx.guest.net
  foreach ($dev to $HW)
  {
  foreach ($ip in $dev.ipaddress)
  {
  $out += $dev. Select @{Name = 'Name'; {Expression = {$vm.name}}, @{Name = 'IP address'; Expression = {$ip}}, @{Name = 'MAC'; {Expression = {$dev.macaddress}}
  }
  }
  }

  $out | Export-Csv - NoTypeInformation-Path ' VM - IP - Info.csv.

  Concerning

  Emanuel