IP not set to start the virtual machine

Similar Questions

• Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

  Scenario is,

  1. smart card reader is connected to the VM with card inserted in

  2 initiate a prompt suspension of the VM toolbar

  3. now to resume the virtual machine by using vmrun command into the host machine

  WS t vmrun start xxx.vmx

  Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

  My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

  Kindly help with this problem.

  Host operating system: Victoire 2012 R2

  The VM OS: win 10 x 64

  Thank you!!

  Dear all,

  I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

  VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

  For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

  ~ Surendra

• ZPrint accident of process before starting the virtual machine

  I see the following messages in system.log everytime my Windows VM starts. These accidents zprint apparently never happened before today. There is no previous accident for zprint report. The messages below always repeat 3 times before other messages on VM, commissioning.

  09/02/15 21:20:33... Report of incidents ReportCrash [7538] advice for zprint processes [7537]

  09/02/15 21:20:33... ReportCrash [7538] error saved crashreport to /Library/Logs/CrashReporter/zprint_2015-02-09-212033_...crash using uid: gid 0: 0, euid: egid 0: 0

  Extract from the report of crash:

  Exception type: EXC_ARITHMETIC (SIGFPE)

  Exception codes: EXC_I386_DIV (division by zero)

  Why the merger issues the command zprint? If she has always done so before, why is zprint now blocking?

  (If I run the terminal zprint command without specifying the name of the area it blocks the same way.)

  Anyone have any ideas?

  Some things that I did today that might be important:

  My Mac Pro locked up while I was running Firefox (open Youtube and Yahoo pages).  I pushed the power button / stop. The virtual Windows machine was running at the time.

  After restarting the Mac Pro, when I tried to start the virtual machine, I got the message: "... vmdk has one or more internal errors that cannot be repaired. The only option is to restore from a backup copy of this disk... »

  So I renamed the corrupt VM bundle, then drag-and - drop copied all of the virtual machine to a backup volume.

  When I started the virtual machine restored, I noticed the crash zprint above messages.

  Thank you!

  OS X 10.5.8, Fusion 3.1.4

  Fusion uses zprint to internal information of the kernel which are very difficult to obtain by other means.

  Given how long it has been since OS X 10.5.8 or Fusion 3.1.4 were changed, either something has been corrupted or something has changed in the system environment for that to happen early.  I can't find any other references to zprint triggering a SIGFPE anywhere else on the Internet...

  If you do not already done, I highly recommend running disk utility and check (and possibly repair) the disks of your host before doing anything else.

  See you soon,.

  --

  Darius

• Cannot start the virtual machine after you create snapshop

  I found a strange behaviour. I have a Windows 2008 guest that I just copied in my new box ESXi. I am trying to create a snapshot before upgrading the guest to 2012 Windows operating system. The virtual machine has currently no snapshots. Whenever I have create a snapshot, he succeeds, but then I can't start the virtual machine saying that it does not find the vmdk file delta even though I see there in the data store. In order to start the virtual machine, I have to delete the inventory and it readd, but then I lose the snapshot. I also have another computer virtual running Windows 8.1 that does exactly the same thing. How can I create snapshots safely without damaging the virtual machine? I also tried to create the snapshot while the virtual machine has been activated but that makes crashing and then it does not start again, so I have to repeat the process to remove the inventory and it time. Frustrating. See the screenshots, I have attached.

  Once these virtual machines have been in Hyper-V in the past and I just convert to VMware format using the StarWind V2V converter.

  Yes, for an ESXi host and target you must either select the ESX f.vmdk as format target (growable option is for VMware Workstation), or you must convert the virtual machine once more instead of simply upload the files to an ESXi host.

  André

• Unable to start the virtual machine after restoration

  Guests including Test host: ESXi 5.1.0.1065491

  Vm problem: 32-bit, Server 2003

  I use Veeam Backup & Restore 6.5 to back up my vm.  I always do a test restore to ensure that my backups are good.  I'm having a problem with a restore.  The 32-bit Server 2003 vm starts just fine on the main host it runs on.  All the vm are 64-bit except for one who is a 32-bit Server 2003 vm.  Restoring the machine virtual and implemented on a host except the 32-Bit vm Server 2003 test.  After restoration and trying power to the top, I get the following error:

  Unable to start the virtual machine.

  Turn on VPCM module has failed.

  Viewed performance counters require version 3 or greater of architectural performance monitoring.

  Anyone know if there is a fix for this problem?

  TIA,

  Mux

  I assume you are using different hardware (CPUs, the BIOS settings) for VMS restored!

  The virtual machine has VPCM enabled, which causes the problem. You can either disable it in vSphere Web Client (you can do this in the vSphere Client Windows), or directly modify the .vmx VM by setting vpmc.enable to "FALSE".

  For how toggle this setting in the Web Client see allow virtual in the Web Client vSphere CPU Performance counters. If you want to edit the .vmx file manually, you need to delete/re-add the VM from the inventory or recharge (see http://kb.vmware.com/kb/1026043)

  André

• Trouble entering the Configuration Page of the BIOS to start the virtual machine by key pressing (F2).

  To start the virtual machine guest OS (Win XP), I want to enter BIOS, by key configuration page by pressing "F2", to change the order of boot options.

  But the initial startup if page flashes quickly, so that I don't get time to press 'F2', most of the time.

  The problem is exasperated because my press F2 is not taken initially without first mouse clicking, somehere in the start page.

  So the order of actions is

  b click the mouse on the settings window, so as he prepares to receive the keystrokes.

  (b) and press 'F2 '.

  Before these two actions are completed, pages flashes by so quickly.

  Anyone can suggest a quick and easy solution for this?

  concerning

  Note: don't know if it is the appropriate forum category.

  + I also not my button "Start a new Discussion" in the General category page? +

  Hello.

  You can manually edit the. VMX file to the virtual machine and add the following line:

  bios.bootDelay = "5000".

  for a period of 5 seconds.

  Good luck!

• Unable to start the virtual machine after Migration - ESXi hosts

  Last night I wanted to move a virtual machine to a host of test to a production cluster.  All hosts (test and production) have shared access to the same LUN, so I usually am able to simply remove the virtual machines of the inventory in the test environment and add them to the production environment by accessing the .vmx on the data store file.  Two of the 3 hosts migrate perfectly and are running in the production environment.  However, the third server, while the migration starts.

  First he gave me errors that it was missing some files.  The only thing I did was different to rename the folder for the virtual machine on the data store.  It was called 'New Virtual Machine' for a reason, so I renamed it to "Antivirus."  However, something strange happened.  Instead of renaming the folder, it seems was created a new folder named "Antivirus" and the old folder 'New Virtual Machine' was still there.  In addition, the renamed folder 'Antivirus' had only SOME of the files needed.  So I just copied from the old folder in the folder "Antivirus" and he hung up the virtual disk of 20 GB file.  So I closed the VI client and checked the vdmk 20 GB folder and back this morning is in the folder with other files.  However, when I try to start the virtual machine, I get the "cannot access a file because it is locked" error message.

  I've done some detective and I noticed that in my second datastore where was the other folder vdmk, the file was now .40kB in size.  Looks like I've lost my other vdmk folder.  What happens here?

  It looks that the virtual machine was still running when you tried to change the name, so the old folder could not be renamed because of the lock. That's why a new folder has been created instead, and why your vm hung on the vmdk file until the lock has been released. Don't know what happened to the 2nd vmdk file, but the file vmware.log in virtual machine directory must have some info as to why does not start the virtual machine. If the 2nd vmdk is gone, this might be a reason.

  -KjB

  VMware vExpert

  Post edited by: kjb007: changed vm in vmdk

• A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  Hello gentlemen,

  I can not only save this virtual machine with Backup Exec 2014 for a long time.

  They are there was no snapshot in snapshot Manager.

  Could you help me?

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\VMware vCenter Server Appliance.

  V-79-57344-38260 - failed to create a snapshot of the virtual machine. The virtual machine is no longer exist, or may be too busy to pause to take the snap.

  A suspended snapshot could not be created for the virtual machine (DC) ha-data center (DC) \vm\FRPA111PRIM01.

  V-79-57344-38299-\vm\FRPA111PRIM01 ha-data center (DC) VMVCB::\\192.168.204.42\VCGuestVm\ (DC). To try to take a snapshot of a virtual machine failed because it could not be suspended in a file system.

  Hello

  I found the solution.

  I disabled the JOB BE general relativity.

  and the host where the virtual machine belong was not the right time. No Ntp server has been configured.

  I did and now there works.

  I think that the problem can come from this.

• Performance metric power group do not show anything on the virtual machine

  Hello

  I have a small question about the metrics of power Group found on the side of the virtual machine in the charts of perf ahead. It shows only 0 for usage.

  If I'm in the same group of metric on the host, it shows the values.

  do you know why it does not show anything on the virtual machine. is a group of metric that is not usable for virtual machines?

  Thank you very much

  Eric

  You have a support contract in place? Otherwise, I can connect this with them for an official answer... If that helps?

• Write notes or description of the virtual machine

  Hello

  I need to write notes or description of the virtual machine to understand the purpose of the virtual machine. Where can I find this option in vCenter?

  We are using vMware vCenter Server version 4.0.0 build 208111 Update 1 and ESX version 4.0.0 build 208167 update 1.

  Thank you

  Kind regards

  NcmsVmware

  u see an option of notes on the summary of a vm tab

• Cannot start the virtual machine in a HA cluster

  I installed a HA cluster with 2 hosts configured in it.

  I disabled the admission on the cluster control.

  Each host is a Dell Dimension 9150 with 2.8 GHz CPU and 2 GB of memory.

  I created a virtual machine on a host with 1 vCPU and 512 MB memory.

  However when I try to start the virtual machine, I see the task of 'Power on a virtual machine' fail with the status "the host has sufficient memory resources to satisfy the reserve."

  Why this is happening and how do after that?

  You have the minimum RAM required by ESX ESX 4.0.

  Add more RAM to play also some virtual machines.

  André

• Could not start the virtual machine: "the specified file is not a virtual disk.

  Hi, I have a problem from a guest vm-workstation.

  Details below - I've done some reading here for some other "the file specified."

  is

  not a virtual disk' messages and I suspect that I am out of luck

  but I have

  wanted to ask just in case there was something miss me

  Here I tried to gather records / logs that other threads

  mentioned - I

  Welcome to all the tips on the revival of the guest, or a

  pointer to a how-to on recovering the files of a given snapshot.

  Thank you

  John

  Summary:

  VMware workstation: 7.0.1 build 227600

  host of os: Vista sp2, 64-bit

  (16 GB of ram)

  guest operating system: sles10 sp2 64-bit (4 GB ram)

  the virtual machine folder:

  drive eSATA (samsung 320, blacx attachment)

  symptom: guest vm

  does not start: says "the specified file is not a virtual disk.

  history: this particular comments works fine; I've done about 30 shots

  during the last 2 months.  The guest is not a copy - even if she did start life as a full-clone

  another linux-client with or without an operating system installed.  In any case, I've used it to very good

  effect for 2 months now.

  So last night I wanted to power off of the host, while I lived my usual steps:

  (1) stop my os of burst (# shutdown - h now)

  (2) even worksation vmware (file - & gt; exit)

  (3) stop start vista (not "suspend" but the real stop turn off the power).

  (4) visa bluescreened.  Now she is doing this every so often, so I thought that it would be

  a big deal.

  (5) this morning I tried to turn on the virtual machine and I got the 'not a virtual disk' error.

  My best guess at this point is the bluescreen stopped some write cache to be

  flushed to disk.  The funny thing is, after the previous bluescreens 3 or 4, the

  Comments to restart without a hitch.

  shrug In any case, just to be weave, I disabled write Vista for outside cache

  device (set to security policy / deletion in Device Manager).  Seems smarter to

  an external device.

  Spare part

  Attached is a file cant_start.zip (191KO) containing:

  dircontents.txt - directory of the client's file listing
  sles10_sp2. NVRAM
  sles10_sp2.vmsd
  sles10_sp2.vmx
  sles10_sp2.vmxf
  VMware.log - other requests asked for *.log files, so I thought
  VMware - 0.log - I should send him these as well.
  VMware - 1.log
  VMware - 2.log
  \ui-logs - 2 IU-logs from C:\Users\jgreve\AppData\Local\Temp\vmware-jgreve
  \vmdk_files - subdirectory of *.vmdk files, light, & can be useful
  -end-

  I checked the VMDK and newspapers - and the VMDK all look great.

  Last departure also seems to succeed?

  As it seems that instant 36 is not used so far - I was just going to throw it away and try again.

  To do this, you would change the line vmx file

  scsi0:0. FileName = 'suse11.2_x64 - cl1 - 000036.vmdk.

  TO

  scsi0:0. FileName = 'suse11.2_x64 - cl1 - 000035.vmdk.

  and then try to restart the virtual machine. If that works then remove all the

  suse11.2_x64 - cl1 - 000036-* files

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

  Hello

  See a strange problem with only a Windows 2008 R2 model. When you use the built-in function "Start VM and wait" workflow to start a virtual machine (after conversion from a template either manually, or through workflow) NIC of the virtual machine (I tried VMXNET3 and e1000 times) does not connect to the problem. Vds can be replicated in a different VCenter, so spreading the vds. I also created several models of Windows 2008 r2 and all have this problem.

  If the model is converted and started outside VRO, it gets an IP from and is connected to the VDS immediately

  Tried add/remove the NIC of the model

  Tried to move the comments on different hosts

  Tried to create a new template from scratch

  NOTE: Windows 2012 R2 doesn't have this problem in the same circles, the only constant is the Windows 2008 R2 being started by VRO.

  Anyone seen this before?

  I found this article and it fixed my problem VMware KB: registration or the deployment of a virtual computer model fails apparently a fix a problem in ESX 5.1, 5.5 (I used the option to get around and things are good)

• Could not start the virtual machine after you use vmkfstools to resize - HELP!

  I thought I knew what I was doing, but apparently not...

  I tried to increase the size of a VM over 36 GB drive and now I can not start the server. Here's the change front of directory list:

  -rw - 1 root root 16781312 Sep 20 19:46 PJAEast-DL01-000001 - delta.vmdk

  -rw - 1 root root 325 28 August to 01:52 PJAEast-DL01 - 000001.vmdk

  -rw - 1 root root 4096 9 February 14:55 PJAEast-DL01-000002 - delta.vmdk

  -rw - 1 root root 277 9 February 14:55 PJAEast-DL01 - 000002.vmdk

  -rw - 1 root root 28201 28 August to 01:52 PJAEast-DL01 - Snapshot1.vmsn

  -rw - 1 root root 28267 9 February 14:55 PJAEast-DL01 - Snapshot2.vmsn

  -rw - 1 root root 131604480 26 August at 08:04 PJAEast-DL01 - flat hard

  -rw - 1 root root 8684 25 August at 21:03 PJAEast - DL01.nvram

  -rw - 1 root root 589 25 August at 15:18 PJAEast - DL01.vmdk

  -rw - r - r - 1 root root 1042 28 August to 01:52 PJAEast - DL01.vmsd

  -rwxr-xr-x 1 root root 2779 Feb 9 15:10 PJAEast - DL01.vmx

  -rw - r - r - 1 root root 267 Feb 9 15:10 PJAEast - DL01.vmxf

  -rw - 1 root root 9898631168 9 February 14:54 PJAEast-DL01_1-000001 - delta.vmdk

  -rw - 1 root root 331 28 August to 01:52 PJAEast-DL01_1 - 000001.vmdk

  -rw - 1 root root 73728 9 February 14:55 PJAEast-DL01_1-000002 - delta.vmdk

  -rw - 1 root root 283 9 February 14:55 PJAEast-DL01_1 - 000002.vmdk

  -rw - 1 root root 36322836480 28 August at 01:41 PJAEast-DL01_1 - flat hard

  -rw - 1 root root 597 25 August at 15:18 PJAEast - DL01_1.vmdk

  -rw - r - r - 1 root root 78710 25 August at 16:06 vmware - 1.log

  -rw - r - r - 1 root root 68108 25 August at 20:43 2.log - vmware

  -rw - r - r - 1 root root 122302 28 August at 01:41 vmware - 3.log

  -rw - r - r - 1 root root 90557 Sep 20 19:54 4.log - vmware

  -rw - r - r - 1 root root 69453 9 February 14:54 vmware.log

  Then, I run the command:

  vmkfstools x 256g PJAEast - DL01_1.vmdk

  And now the virtual machine does not start, return an error: "the virtual disk parent has been changed since the child was created."

  The directory listing is now ("BOLD" indicates the change of information post-vmkfstools):

  -rw - 1 root root 16781312 Sep 20 19:46 PJAEast-DL01-000001 - delta.vmdk

  -rw - 1 root root 325 28 August to 01:52 PJAEast-DL01 - 000001.vmdk

  -rw - 1 root root 4096 Feb 9 16:12 PJAEast-DL01-000003 - delta.vmdk

  -rw - 1 root root 277 Feb 9 16:12 PJAEast-DL01 - 000003.vmdk

  -rw - 1 root root 28201 28 August to 01:52 PJAEast-DL01 - Snapshot1.vmsn

  -rw - 1 root root 28267 9 February 14:55 PJAEast-DL01 - Snapshot2.vmsn

  -rw - 1 root root 131604480 26 August at 08:04 PJAEast-DL01 - flat hard

  -rw - 1 root root 8684 Feb 9 16:12 PJAEast - DL01.nvram

  -rw - 1 root root 589 25 August at 15:18 PJAEast - DL01.vmdk

  -rw - r - r - 1 root root 1015 28 August 01:52 PJAEast - DL01.vmsd

  -rwx - 1 root root 2779 Feb 9 16:12 PJAEast - DL01.vmx

  -rw - 1 root root 267 Feb 9 16:12 PJAEast - DL01.vmxf

  -rw - 1 root root 9898631168 9 February 14:54 PJAEast-DL01_1-000001 - delta.vmdk

  -rw - 1 root root 331 28 August to 01:52 PJAEast-DL01_1 - 000001.vmdk

  -rw - 1 root root 73728 Feb 9 16:12 PJAEast-DL01_1-000003 - delta.vmdk

  -rw - 1 root root 283 Feb 9 16:12 PJAEast-DL01_1 - 000003.vmdk

  -rw - 1 root root 274877906944 28 August 01:41 PJAEast-DL01_1 - flat hard

  -rw - 1 root root 599 9 Feb 16:11 PJAEast - DL01_1.vmdk

  -rw - r - r - 1 root root 68108 25 August at 20:43 2.log - vmware

  -rw - r - r - 1 root root 122302 28 August at 01:41 vmware - 3.log

  -rw - r - r - 1 root root 90557 Sep 20 19:54 4.log - vmware

  -rw - r - r - 1 root root 69453 9 February 14:54 5.log - vmware

  -rw - r - r - 1 root root 39510 Feb 9 16:12 6.log - vmware

  -rw - r - r - 1 root root 39411 Feb 9 16:12 vmware - 7.log

  -rw - r - r - 1 root root 39410 Feb 9 16:14 vmware.log

  I can't do anything else until I get comments. Can anyone recommend a way to solve this problem?

  I thought I knew what I was doing, but apparently not...

  I agree

  Two a problem with the new drive.

  1. You get the error message comes from the basic disk with a different size than the disks of the snapshot.
  2. With a size of 256 GB, you will not be able to create snapshots of the disk (on ESXi prior to 5.0 with a block size of 1 MB)

  What you can try to do is to edit the file PJAEast - DL01_1.vmdk :

  • 536870912 VMFS 'PJAEast-DL01_1 - flat hard' RW--> RW 70943040 VMFS 'PJAEast-DL01_1 - flat hard. "
  • DDB. Geometry.Cylinders = "33418'-> ddb.geometry.cylinders = '4416.

  After that, I would recommend to clone the virtual disk to a new one, replace the virtual disk in the virtual machine settings and resize it to a maximum of 254GB (see "calculates the time system required by the snapshot files" at http://kb.vmware.com/kb/1012384)

  • vmkfstools-i PJAEast-DL01_1 - 000003.vmdk PJAEast - DL01_1a.vmdk

  André

• Failed to create snapshot - now I can not start the virtual machine.

  Hi guys,.

  I took a snapshot of my VM and got the error:

  Cannot open disk ' / vmfs/volumes/xxxxxxxx.vmdk' or one of the snapshot disks it depends on.

  Reason: Invalid drive string: cannot mix ESX and hosted style discs in the same chain.

  I deleted the snapshot in the Snapshot Manager, but my VM will always start (same error)

  Can anyone help? Its a vanilla install, just 1 VM on it.

  Thanks in advance

  Always pointing the Flash disk VMX configuration file. Whenever you remove the Flash disk, the drive-VMX configuraiton must be updated correctly. In your case it does not somehow. Anyway, lets get a work around.

  1 take the backup of the VMX configuration file

  2. edit the VMX file

  3 scsi0:0.fileName = "QFES_1.2.25 - RHEL52_x86.vmdk" (Please check the VMDK file name correctly it)

  4. save the file

  5. turn on the virtual machine

  Check your luck now