Start the virtual machine and wait for WF, does not connect to the computer virtual for Vds (Windows 2008 R2)

Similar Questions

• Firefox did an automatic update on my machine and now my firefox does not connect to internet

  Firefox did an unexpected update and now it does not work (to connect to the internet)

  See-> unable to connect after Firefox update

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Windows XP restarts all the time; does not start mode safe mode and last known Configuration does not work either

  Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.

  I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?

  Thank you.

  The afflicted system has a working CD/DVD drive (even an external).

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu, it has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Microsoft Security Update 11/01/2012 installed including Service Pack 2 and now start the computer fails. No Windows security, no system restore.

  Can't start at a fixed point to the password screen. Goes to a blue screen and try to restart automatically.  When you run safe mode cannot use the system restore, have no security of windows, so does not automatically restart when the change is made impossible to read.  Norton 360 found two viruses at the origin and the fixed, no viruses detected in recent failure.

  Hello

  You can use the full version of Windows Vista installation disc and try to perform a restore of the system, the Windows recovery environment and check.

  For more information, you can consult the following article ot.

  What are the system recovery options in Windows Vista?

• I've upgraded to Windows 7 Ultimate and now my system does not connect to internet and my built in webcam does not work.

  help please

  I tried to upgrade the verson windows seven that came on my computer vaio to windows 7 Ultimate edition. now I can't connect to internet, my built-in webcam does not work, the menu drop-down selector top of page disappeared and I do not see where there is no improvement in the operating system. That's happened?

  This thread was created in the Windows Update forum.  The moderation of Microsoft answers team has moved to forum installation, upgrade, and activate.  Thank you.

• How to restore the backup on iPhone 5 s after 9.3.2,and if my phone does not connect to anything?

  Yesterday, I received 'update available', and so without thinking I just did.  Today my phone will load a web page not (Wifi or cellular), I can't turn off find my iPhone because my password can not be verified, my mailbox is not updated and my messages are all coming through an hour after they are sent.

  To do this, I'd go straight to reset network settings.

• Get this 'swistrres.dll' error message when I start the computer portable 64-bit Windows 7 Professional.

  I get this error in my laptop to windows 7 64 bit

  Please help me solve this problem
  Your immediate response is much appreciated...
   
  Original title: swistrres.dll

  Hello

  You don't tell us anything about what programs you have installed, or when you get the error.

  Here's what swistrres.dll is.

  http://www.ProcessLibrary.com/en/directory/files/swistrres/406794/

  "swistrres.dll is a SwiStrRes.dll belonging to the resource string API of Sierra Wireless, nonsystem Inc. as swistrres.dll process are created from the software you have installed on your system."

  See you soon.

• Bluetooth between iPhone and Macbook Pro 6sPlus does not connect

  Hello

  Trying to get MacID works on my iPhone 6sPlus.

  My iPhone is running 9.3 (Beta)

  My Macbook Pro (late June 2013) is El Capitan 10.11.3 running

  I got a Fitbit watch and it connects and syncs with my phone without problem.

  Every time I try to pair the two devices, I get security code 6 digit flashing on my screen for a few seconds, then dies and my phone shows the connection has failed and will not pair.

  I tried to remove the fitbit to my phone and once again pairing and the same thing happens (I have no other BT devices to test).  BT-sharing on my mac is also activated.

  Any ideas?

  See the following instructions for MacID. Note that Bluetooth must be turned on in both devices but the 'twinning' they do is done in the soft, not in the settings > Bluetooth.

  http://MacID.co/help/?c=Setup&SC=pairing%20A%20device

• Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.

  Original title: System Event Notification Service does not connect.

  Computer will not start.  Error message states that Windows cannot read the Service Notification of system events.

  Hi DACL.

  ·        What is the full error you receive when you try to start the machine?

  ·        You did it all change hardware or software on your machine before this problem?

  You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Repairs to the system of Windows recovery environment

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L40 - 14N does not connect to the WLan router

  Bought two portable Satellite L40 - 14N as Christmas gifts and one of them does not connect to the wireless router.
  Is the error that says "error message unknown" try please login again.

  The wireless network appears in the list of networks available with a strong signal. Notepad attempts to connect but the error 'wireless link failed for an unknown reason. " Made a comparison with the other laptop that works very well and the configurations appear to be identical!

  Tried it on wireless network from a friend with the same result. All suggestions, am pulling out my hair at this point.

  Seems to be a Vista issue.

  I found this article Ms knowledge base:
  http://support.Microsoft.com/kb/928233/en-us

  You need to add a value in the Windows registry.

  1. Click Start, type regedit in the search box, and then click regedit
  list programs.

  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE es\Tcpip\Parameters\Interfaces\ {GUID}
  This registry path, click the (GUID) subkey that corresponds to the
  Network adapter that is connected to the network.

  3. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  4 new value #1, enter DhcpConnEnableBcastFlagToggle, then
  Press ENTER.

  5. right click on DhcpConnEnableBcastFlagToggle, then click on modify.

  6. in the value data box, type 1 and then click OK.

  7. close the registry editor.

  concerning

• Satellite L350 does not connect to the internet, network adapter yellow exclamation

  Trying to help my Nan with his laptop...
  Model is Satellite L350-170

  Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

  She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

  All the drivers can be downloaded from the Toshiba UE driver page.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
  Then, you will get the list of drivers.

  If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

  You asked how to remove the network card?
  Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
  Click the single LED adapter, and then press or click on uninstall button driver

• the airport does not connect to the internet new

  I moved and now my airport does not connect to my new internet provider.  Can anyone suggestion solutions?

  Any time you change your provider or hardware networking it is always a good idea to perform a complete recycling of your network equipment power. Please check the following Tip of an airport users for assistance. Post back your results or if you need further assistance.

• Where can I find "Windows Fax and Scan" if it does not appear under my "all programs"?

  Where can I find "Windows Fax and Scan" if it does not appear under my "all programs"?

  WIndows Fax and Scan is only supplied with Vista business, full and firm.

  http://Windows.Microsoft.com/en-us/Windows-Vista/send-a-fax

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx

• my button is not the top of my list of contacts - when I start typing a name, a list does not appear, for me to choose and my spell checker does not work

  my button is not the top of my list of contacts - when I start typing a name, a list does not appear, for me to choose and my spell checker does not work

  Hi Lynn,

  What mail client do you use?

  Using Windows Live Mail or Outlook?

  For Windows Live Mail:

  The best place to ask your question of Windows Live is inside Windows Live help forums. The experts he specialize in all things, Windows Live and I would be happy to help you with your questions! Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

  For Outlook:

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

  If you are not using one of the people then please let us know what you use so that we can help you further.