start-up in win xp that I got the error as "system3_.exe" file not found, search... what kind of error is? Please help me.

Similar Questions

• I get an error message RunDll module 'wgsdgsdgdsgsd.exe' is not found. What does that mean? Where can I find the statup line which refers to this module?

  This message only appears at startup (resarts or normal startup) and just close it all can work (apparently) very well.

  Assuming that when you close it message your computer works fine, there is probably something in the routine to start looking for this file. When I updated my antivirus AVG, they had a free trial of a utility that scans your computer and corrects errors such as something poining to a lolocation that does exist (because you deleted the infected file).  I think it's how I solved the problem on my computer, but I don't know what it was.  Good luck.

  Jim Lago

• I tried to install a game on my computer, but every time that happens at a certain point it says "file not found".

  I tried to install a game on my computer, but some time during the installation it says "Windows cannot find the file. "Make sure the file exsits and try again. I checked to see if it was compatilbe with my operating system and it has been. What should I do? The game is Lego Star Wars 2 the original trilogy. My computer is Windows Xp.

  Hi Jesusfreakmir123,
   
  -How you try to install the game? It is with the downloaded file or installation disc?
   
  If you try to install the game with the installation disc, copy the contents of the disc to the hard drive and then run the installation and check if the game is installed successfully.
   
  Keep me updated on the status of the issue.

• Many of my photos in Lightroom have exclamation points in the upper right corner of the file.  I can't export, modify, or doing something with those photos.  They system (Lightroom) tells me that the files not found

  Many of my photos in Lightroom have exclamation points in the upper right corner of the file.  I can't export, modify, or doing something with those photos.  They system (Lightroom) tells me that the files not found

  Hi Jenny June,.

  Please take a look at the following article, it should be useful: https://helpx.adobe.com/lightroom/help/locate-missing-photos.html

  Kind regards

  Tanuj

• My computer freezes and the only way so he can come back is to hit the reset button. He did it since the day that I got the computer.

  I talked to my people to internet protection and they say that it must be something to do with microsoft software. I bought the computer from people don't get it to reproduce the problem, so they can not fix it. Sometimes I'm on the internet or not that's why I tend to think it's a matter of microsoft.

  How old is the computer?  Is it is a Windows problem, then a clean reinstall or reset to factory State would fix it.  It was present from the first day that you got the computer so I tend to think that it is a hardware problem, call those who sold you the computer using, if I had received such a machine, I immediately, he would have returned, computers are not supposed to work like this when they come new out of the box!  To solve this, I would like to start by running a test of the RAM on the machine.

  Windows Memory Diagnostic

  http://oca.Microsoft.com/en/windiag.asp

  John

• I got the error message error video compilation that follows? What should I do

  I got the error message error video compilation that follows? What should I do

  Export with the SOUL. Open Preview and watch the encoding until it fails.

  This is the place on the timeline, you need to fix.

• Upgrade Windows xp to Windows 7 Professional. During installation I got the error code 0 x 80070005. Solution?

  error code 0x80070005

  Upgrade Windows xp to Windows 7 Professional. During installation I got the error code 0 x 80070005. Solution?

  How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers
  http://support.Microsoft.com/kb/938450

  Error code 0x80070005

  Symptom
  When you try to use a KMS host, a KMS client, or a MAK to activate one or more computers, you may receive the following error message:

  0x80070005
  Access denied that the requested action requires elevated privileges.

  Cause
  This problem occurs if the user (UAC) access control does not allow activation of process run in a not high command prompt.
  Workaround
  To work around this problem, follow these steps:

  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as.
  2. click on the next user and then select Administrator in the user name list.
  3. click on OK.
  4. at a command prompt, type the following command and press the "Enter" key: slmgr.vbs

  J W Stuart: http://www.pagestart.com

• I got the error message "Spooler subsystem app stopped working and was closed".

  I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

  Hello

  You should probably check with Support from Adobe and their communities and Forums in case
  There are known problems.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ====================================

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Message says: "Windows could not load correctly" then he got the error: "0xa0000001.

  So I recently got these computer errors on my laptop. The pixels on the screen start to panic and it still restarts my computer.

  The first time, he started was when I was playing a game called League of Legends and it worked perfectly fine on my laptop, and he had always run around 70 fps. I played this game for a long time. Then, in the middle of an online game the screen flipped out and restarted my PC! He sent me a message saying: "your PC has encountered a problem :(. "

  After it restarts my laptop and then after restarting the pixels on the screen start to panic again and it restarted. After that restart again once he sent me a message saying he will "fix the problem on my PC. I clicked on 'Repair' and then it restarted again. After the restart he freaked out again and then it restarted and it gave me a message saying "your PC will convert at an early stage when it doesn't have this problem. This can remove files that have been installed recently. So, I allowed it do and after 3 hours of waiting he brought me to an earlier stage if my laptop was not the problem. He only come back in a few hours. Then the next day, I decided to try again in League of Legends, it was working fine and it launched the game. I was running on my normal fps then he started trolling and it fell to 12 frames per second and the screen flipped out again and then my computer restarted. Once restarted, it it worked fine after 5 minutes it restarted again, and then he gave me a message saying: "Windows could not load correctly" then he said I got the error: "0xa0000001. I turned on my PC and my screen has panic when he started, and then it restarted again give the same message and tell you have the error: 'DRIVER_OVERRAN_STACK_BUFFER '. It came on again and it was worse still panic then it restarted and it gave me the same message saying that you have the error: "BAD_POOL_HEADER". It restarts and several times with lit the screen always freak out so I decided to just remove the plug and ask for help. I went on the computer of my brother and sought a solution for these errors. Turns out Im not the only one to these errors. They say that '0xa0000001' error is caused primarily by an AMD graphics card and my graphics card is an AMD graphics card. The solution for this error is to uninstall the graphics card and reinstall it directly from the manufacturer's website. I could have made this solution and corrected my graphics card, but there is a problem. Whenever I turn on my laptop the pixels panic and sometimes the screen turns black and then it restarts. I can't access anything whatsoever, and he keeps just restarting. Please help me and tell me how to fix my phone :( I really need a solution to this problem.

  Please answer quickly :(

  Thank you

  There is an old saying that if it ain't broke, don't fix it.

  It works again.

  Read this information

  You need to get the Driver of your laptop computer software or a hardware manufacturer, not through Windows Update (with the exception of Microsoft put updated material), as Microsoft normally does nor those have the most recent drivers available as Microsoft leverages the hardware manufacturer 3rd party to provide them.

  Go to the website for your laptop or manufacturing equipment > Driver and Software Support Section > search your laptop or material style number > then your operating system > locate the correct drivers > download and install.

  ______________________________________________________

  But this is no guarantee that this won't happen again.

  Also, it would be that the game hardware requirements are higher than supports the hardware in your laptop.

  It could also be due to lack of graphic material.

  All you can do is search for the latest drivers and play games that require only a material that has your Lapyop.

  See you soon.

• Error file not found in Temp. Firefox does not start

  When I try to start Firefox (Windows 8.1 desktop computer) I get a full white screen with only the following error message:

  File not found
  Firefox can't find the file at / c; /Users/ username/AppData/Local/Temp/name of file (more than fifty characters long, all the numbers and letters without anything that looks like a real word and ends in /BGAW05 .htm).

  It of only a button to Try Again that never works and some directions to verify the name of the error file, or check if the file has been moved, renamed or deleted. I check to see if the file is no where on C: and it doesn't. It is there no file in Temp even remotely close to that name. I run Firefox with several tabs that are registered and come back when I restart Firefox. So maybe this file in Temp was associated with a deleted tab.

  As I said, this error message comes up full screen, covering the taskbar and not reduce it, restore, close buttons, as if I was running in mode Metro, I never do and will never do.

  Because of this error I can not even start Firefox now, so I had to become a user of Internet Explorer.

  How can I get Firefox to stop looking for this file?

  Any help on this will be greatly appreciated. Thank you.

  I found a solution to my problem. Looking in my info on solving computer problems, I noticed that some problems can be resolved by the administrator. I tried with Firefox and it worked. The only damage was that I lost the current tabs. But Firefox seems to work fine otherwise.

• Firefox tells me I'm aware, but he also says that I am under 16 version. I can't download a more current (says file not found).

  When I got Firefox > on Firefox, it tells me I have 16.0.2
  However he also told me that I am up to date.
  Based on a quick search, it seems that you are on twenty something!
  I tried to download a new one (for mac, British English), but it says "file not found".

  Don't know what to do.

  The current versions of Firefox requires OS X 10.6 or later, so if you want to continue using Firefox beyond Firefox 16, you must upgrade to OS X 10.6.8 or later version.

  • https://support.Mozilla.org/KB/Firefox-no-longer-works-Mac-OS-x-10-5

  Firefox 16.0.2 is the last version that works on an Intel Mac with OS OS X 10.5.

  • https://FTP.Mozilla.org/pub/mozilla.org/Firefox/releases/16.0.2/Mac/

• McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.

  McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
  Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please

  [Moved from comments]

  Hey Carol,.

  It would help if you could answer these questions.

  -What version of Windows is installed on the computer?
  -What antivirus software do you have on the computer?
  -When you get this error? It is when the computer starts for the first time?

  Here are a few troubleshooting steps that you can try to get the matter sorted.

  First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is

  used by Mcafee and could be the reason for the error.
  Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.

  If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner

  Make sure that the computer is virus-free.

  Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

  Note: the steps mentioned in the link applies to Windows vista and Windows 7.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Let us know the results.

• How do another firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  How to make another firewall that windows firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  Hello

  • What version of Windows are you using?

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/Firewall-frequently-asked-questions

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• On the computer, it does not load XP but goes to the XP start and says: NVRD32.sys file not found

  On start-up the computer, it does not load XP but goes to starting XP, and says NVRD32.sys file not found. I have to go up to xp home line manually and it load. How to fix the problem, so he starts xp automatically without entering start xp
  Thank you

  Posing for the PC model, you show that you do not know the answer, it was a software problem, but you're right, it's a Dell.
  In any case, I found the answer elsewhere, must with the boot.ini file on XP