Start windows XP Home Edition with a RunDLL error

When I boot windows XP Home, after the Welcome screen and the office fills with icons, I have a RunDLL error box that says the right: error loading c:\windows\dlioneg.dll the specified module could not be found. I ran RegistryBooster2010 but it did not help.  Any idea.  The computer is a small netbook from ASUS.

This file was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

For more information about how to use the Autoruns, please see:

Autoruns for Windows Windows Sysinternals Autoruns Forum

Boulder computer Maven
Most Microsoft Valuable Professional

Tags: Windows

Similar Questions

  • My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

    My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

    original title: status: network address acquisition
    Hi BKlap,
     
    Try these methods in the order.
     
    Method 1: Repair the network connection to solve the problem.
    For more information, see:
     
    Note: The information in the article applies to Windows XP Home Edition as well.
     
    Method 2: Follow the steps listed in this article to resolve the problem:
  • Cannot format disc disc HARD NTFS - Windows XP Home Edition with Service Pack 3

    Hi, I hope someone can help me to solve this problem, because it drives me crazy. I have Dell Inspiron 4500 which HDD is running out of space. There was also a problem with the disc essentially installed 2 new 1 x 120 GB Maxtor hard drives and 1 x 320 GB Hitachi. I installed Windows XP Home Edition on the Maxtor from scratch and load all the drivers and patches, etc... However whenever I try to put in place the Hitachi under NTFS, it falls on the formatting. If I use third-party tools all right until you try to access it through windows, then I get "cannot access the disk, the files are corrupted or damaged. In windows Disk Manager, you can see the drive, but the file system is empty. I can take out the drive and set up on my other machine without problem. I can set up the correct disk in FAT32? If I then try to CONVERT, switch again.

    Any help to fix this would be greatly appreciated.

    Kind rgds

    Hello Maver1ck63,

    Thank you for your message.  You have the jumpers physics master/slave accordingly?  Otherwise, the value OS hard drive (Maxtor) to the master and your Hitachi to the slave.  After a reboot, your system recognizes this drive in 'my computer '?  If so, can you right click and format the drive?  (Keep in mind, the formatting will erase all data on the disk, you will need to back up any important information before formatting).  If you cannot access or recognize this drive:
    Click 'Start' > right click on 'My computer' > select 'manage '.
    Click on "disk management".
    Do you think your player, you can get in shape from here (or assign a drive letter if it is not recognized in my computer)?
    Please let us know the result.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Have a Dell PC with Windows XP Home Edition with restoration, internet and the program of the questions that I went into the details in the body of the present.

    I have a Dell with Windows XP Home Edition system that uses the internet connection. Friday, he had a problem with images in line being "pixel-ed", which means that the image was blurred and boxes. So I did a restore of the system back as much as she would in July and concluded that the IAF has a program called accelerator that had been implemented to go faster, but eventually would make very good images. Then, I got that part fixed but now a game that I play "Mahjongg" won't play right and when I go to the area "help and support" to try to reschedule, so it don't open even now. Can someone help me please? Thank you

    Thanks for the help. I returned and reinstalled everything, even if it was already installed and now everything works.

  • Activation of a windows vista home edition with my HP laptop

    I have a home edition of windows vista with my HP laptop, I installed it with its written code and I need to activate it. the phone number method has the wrong number. I need to activate it. online or by phone number valid in Egypt. Help, please

    Hi a2aan,

    ·         What happens when you try to activate online?

    Follow the steps in the article.

    How to activate Windows Vista

    http://support.Microsoft.com/kb/940315

    Activate Windows on this computer

    http://Windows.Microsoft.com/en-us/Windows-Vista/activate-Windows-on-this-computer

    Activation and registration of a Microsoft product

    http://support.Microsoft.com/kb/326851

    How to find a phone number for a Microsoft Product Activation Center

    http://support.Microsoft.com/kb/950929

  • How can I disable the basic after you have reinstalled Windows 7 Home Edition with BitLocker Drive encryption?

    Original title: Bit Locker Drive Encryption problem

    . I bought my laptop with windows 7 home basic operating system. After 1 year my Software Engineer friend makes me Express Windows Ultimate.Then upgrade after a few viral problems, I recovered my system, then I went home base only. But when I was working with Ultimate, I used Bitlocker Drive Encryption.But when I got to the Home Basic edition, I couldn't stop this disc encryption. So please help me to stop temperature Drive Encryption.

    Hello

    Follow the described steps mentioned to turn off BitLocker.

    1. open the Bitlocker Drive encryption by clicking the button of theStart, clickingControl Panel, clicking Security, and then click Bitlocker Drive encryption.

    2. do one of the following:

    o to temporarily suspend BitLocker, click on suspend Protection, and then click Yes.

    o to turn off BitLocker and decrypt the player, clickTurn Off BitLocker, and then click reader to decipher.

    Check the link for more information.

    http://Windows.Microsoft.com/en-us/Windows7/help-protect-your-files-using-BitLocker-Drive-encryption

  • Windows XP Home Edition with two procesors

    Hello

    I have configured the VM Windows XP Home with two processors, but the Task Manager does not appear the two processors. Any suggestions?

    Kind regards

    Silica V.

    Like it in Microsoft KB "Note: Windows XP Home may use a maximum of 1 processor physics.", I don't think so Home XP supports two processors.

    http://support.Microsoft.com/kb/810231

  • I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490

    I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.

    Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1

    Hello

    Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:

    Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

    Note: Make sure you back up your data before you perform a repair of Windows installation.

    Hope this information helps. Back to us for assistance.

  • Qosmio F10 - cannot install Windows XP Home edition with the new HARD drive

    My F10 won't boot from a hard drive and because of its obvious from the hard drive, it is definitely broken. I changed the build in Toshiba 80 GB HDD for a Toshiba hard drive with 60 GB.

    I put an Installation of Windows XP disc in the drive and press C at the start to boot from the CD. It does not start the installation, but on the contrary, he says that I have to remove the hard drive.

    Why? Is this only possible ti disc editing hard identical because there is not bios?

    HELP PLZ!

    Hello

    Your new HARD drive is recognized correctly in the BIOS?
    Check it!

    Plus when you get exactly the message installing Windows and which will be displayed exactly?

    Can try you with Toshiba Recovery disk, please?

  • No sound on Tecra S5, "THotkey" error starting Windows XP Home edition

    I have a laptop Tecra S5, I deleted some old programs for card readers.
    Now, sound does not work and starting the PC, windows starts and I get the message: "Error THotkey" this audio diviece is not supported.

    Is it just the audio driver what is missing and how can I reinstall it?

    Who knows, what did you do with stuff pre-installed. THotkey has nothing to do with the old programs for card readers, but it is very important tool of Toshiba.

    Did do us all first to know what is the status of the sound card in Device Manager. Sound card installed and registered correctly?

  • Cannot start Windows XP Home edition

    If anyone can help me it would be much appreciated!

    My brother has problems with his laptop - I don't know what model exactly, but it was only bought last November and has not been used that - it's not only recently even had installed on internet!
    It is only 14 - and I think that's how it was broken...

    He downloaded the new version of iTunes for its new iPod touch. It was good and work fine. Then, he saw a DVD on his laptop computer, from this point on that he has failed the next time he turned...

    The Windows startup screen is entered as usual, but nothing, just a black screen. He kept this over and over again. Then a screen comes say he met a problem or something. And these guests:

    Run in safe mode
    Run the prompt command (or something)
    Execution of the last known good configuration.
    There was something else, too.

    So, I tried to run from the last good config. We found a date that he remembered and tried to run from there. This new, just did nothing. A black screen is empty.
    Thus so we tried safe mode because there was a small guest saying something about editing a file, but we didn t know what devil do!
    (My apologies for the buzz...)

    So, basically, my brother took on himself to try and restore the system - without me! I'm afraid he did it wrong and now it's even worse!
    He did the unpacking, etc. Once that was done he apparently "did nothing" again. It lacks a screen saying 'ntdl' or something?
    He did restore 5 times more that could have been the wrong thing to do?

    But once again, nothing. Just a stupid screen saying the ntdl or anything that is missing. In the manual of the laptop, he said there may be some repairs done with the installation disc - but the phone didn t comes with an and the system doesn't restore disc to tell...

    I'm really sorry if this makes no sense. But could someone please try and help?
    Thank you

    Hello

    According to your message, you have done all that is possible to get the windows running.
    But it s very strange that you have received the laptop without the Toshiba Recovery CD. Wait a minute you have a Toshiba laptop?

    In any case my opinion is not much to do apart from a fresh install of the OS
    You should really try to do!

    > But once again, nothing. Just a ridiculous screen saying the ntdl or anything that is missing
    The error message ntdl is missing is known to me. I found some discussions on this error message.
    Some users have solved this problem it might be interesting for you to check these messages:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24292
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=58&ThreadId=24051

    Good luck

  • Portege R100 - I can reinstall Windows XP Home edition with USB floppy & USB key?

    I recently damaged my R100 thanks to a virus attack. Despite late cleaning things up with Norton, it will now very slowly and I think that the only way forward is through a total reinstall XP.

    I have the original recovery CD and a USB floppy drive but not a PCMIA CD-ROM. As luck would have my USB CDRom is broken. How can I get out of this situation? I'm about to throw an old desk and would be happy to use the XP retail on the R100, if necessary. It is also possible to start the format & install process from a startup disk, and then most of the OS from a USB - having previously filled with copies of the contents of the CD? Desperate people make desperate methods!

    I've read a few other discussions on recovery XP issues but they are not entirely coincident with my situation. Any help on this front would be very welcome.

    Thanks in advance.

    If you can get the installation on the R100 HARD disk files using a FAT32 partition, you can install Windows from the HARD drive after booting from a bootable MS-DOS floppy. (MSDOS can not see NTFS drives).

    You can use a 1.8 "adapter HARD USB drive to copy the installation files on the disk HARD R100 from another PC. The adapter would be cheap.

  • Cannot start Windows XP Home edition as usual

    The other day I was on my laptop and accidentally, I pressed the button, turn to and went the entire computer. I went to turn on the laptop when a message came saying "your computer has not been extinguished shut down properly etc.." There is a list that I could take
    -Safe Mode
    -Safe Mode networking
    -Safe Mode (don't remember what the other said)

    Then there was the start in normal window. So I cliked and it came as he just turned on and the XP loading bar upstairs as when you turn on your computer and it keeps staying like that. Just the Windows XP and the bar under run through all its loading.

    Let him like that for nearly an hour and no different when I came back to the laptop. I also tried yesterday it turn on and off and today. The computer will not come. I'm now in Mode without failure.

    Can someone tell me please how I can solve this problem?

    See you soon
    Jordan

    Have you installed/updated a driver/software before that? You should uninstall in safe mode and try again.

  • I'm operating a windows XP Home Edition with service pack 3. Analysis of essential security of a windows shows that my computer is infected with a virus ' "Trojan horse: back/Alureon.A"»

    In January of this year my computer would freeze, or be very slow in its normal operation. This happened constantly. I tried to verify that my windows update check to be sure that I was getting my automatic updates. I was unable to connect to Windows update, no matter how many times I tried. This never happened before. So, I thought that my inability to connect to verify Microsoft Updates could be related to my computer running at a slow speed and / or gel constantly upward. When the computer froze, the only way to recover was to hit the kill switch and crash the computer. After the reboot, the computer could work normally for a period of minutes and resume again slow down and not to freeze completely upwards. For weeks, a Microsoft Tech person (Kevin) worked with me by e-mail and tried to fix my computer problems. Kevin exerted a lot of patience and accompanied me through a series of steps designed to understand what the problem was and fix it. At the time where we ran a Microsoft Scan (Scan, I believe was the name One) followed by an analysis "HijackThis". Kevin then read the results of analysis and recommended destruction of vast print of HijackThis. This has made some slight improvement to operations. As Kevin has attempted to provide additional assistance, I left for vacation. I came back, I did a scan of Microsoft Essential that determined that my computer is infected with a virus called "Trojan:DOS / Alureon.A.

    How do I rid my computer of this Trojan horse and restore my Microsoft updates and restore normal operation of the system?

    Thanks, Ben

    Run this Alureon is a rootkit . This can restore windowsupdate, once he removes the rootkit

  • Newly installed Windows XP Home Edition OS updates, 0x8024400A error code

    Windows is activated, load on a hard drive replacement, recorded, etc.. Used the OS disc that came with the computer

    You must be at Service Pack 3 level before you can use Windows updates.

    To determine which service pack is currently installed on your computer, follow these steps:

    1. Click Startand then click run.
    2. Copy and paste, or type the following command, and then click OK:

    winver

    A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

    See also: http://support.microsoft.com/kb/2497281
    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

Maybe you are looking for