start with sad long time

Similar Questions

• With 32-bit and a clean install also takes a long time to start and a very long time to stop.

  I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

  Hello Duane,

  For more clarity and response, I divided it in its own thread.

  After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

  What are the specifications of material of this machine?

  We might want to try a clean boot and see how that affects the issue.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve this problem.

  Best regards

  Matthew_Ha

• Satellite M300 PSMDCA takes a long time to start

  I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

  First of all, when you start the computer, it takes a long time to start and activate Outlook.
  I am running Windows 7Home Premium.
  Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

  Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

  Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

  Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
  Quite often when scrolling on the websites of the page I'm going to freeze?

  I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

  Any thoughts? Thanks, Shirl51

  > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  This nonsense!
  The system should boot up quickly my laptop needs 30 seconds to start.
  In my opinion, the system is screwed

  In your case, I recommend to reinstall the system.
  Did you create the recovery disk?
  If this isn't the case, I think that detailed instructions should be placed in the user's manual.

  After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

• Time of very slow start with SSD

  Hello

  I spent the last few days the net trying to find a solution to the boot of win7 very slow but have led to nothing so far trawling.
  Im running Win7 Pro in bootcamp on a Macbook Pro with an SSD and 16 GB of RAM, but don't get a time horribly slow start, including a screen black (with usable mouse) for a long time before the watch office. I am not able to do a reinstall but would like to get the issue resolved if possible.

  So far, I checked the event viewer to see there are problems and I don't see anything significant that the mere fact that each entry includes an 'Error' level, but I don't see what this error. I also used the process monitor to see what takes so long and there are a couple of processes which are time consuming and show a result 'Cancelled', one being svchost.exe 110secs (path: ...system32\drivers\etc) and the other 23secs Explorer.exe (path: ...appdata\roaming\microsoft\systemcertificates\my)

  I should mention that I'm very new to this kind of troubleshooting but would appreciate any help I can get!

  Thank you!

  The problem is that windows has been hanged in trying to restore network connections. Problem solved!

• What is a fast alternative to starting a business of DPS app if Apple Store rejects the App? We are in a long time and can't wait for Apple. We host the application elsewhere. How we host our DPS application on the website of our customers?

  What is a fast alternative to starting a business of DPS app if Apple Store rejects the App? We are in a long time and can't wait for Apple to approve. We host the application elsewhere. How we host our DPS application on the website of our customers? Thank you.

  Unless I misunderstood the question, you can do what you want to do. Apple does not allow to circumvent their public applications store and host on a Web site. The exception is an enterprise application, which requires a company to both Apple and Adobe account. This type of business application can be distributed only within the company. If that's what you want to do, you can learn more here:

  Digital Publishing Suite help | Creating the observer for private distribution applications

  Distribution of iOS Viewer with Digital Publishing Suite business applications | Adobe Developer Connection

  Another option is to add the development application to multiple devices and use them for your demo.

• Starting the server takes a long time due to the storage of JMS persistence files

  Hello
  
  We use WebLogic 9.2 on a windows machine.
  Recently, we have improved our request to work with JMS.
  We are on 2 different servers in a cluster using 2 JMS servers and works with distributed destinations.
  We use file storage as our persistence store.
  
  Recently, we found boot server takes a long time because of the actions that are performed on the storage of files.
  Analysis of this problem, we have seen that the size of the file is of ~ 2 GB.
  We understand that the file size does not fear (unless it is compacted manually), and its size matches the largest number ever of pending messages in the queues (as a mark of high tide).
  We shot also store debugging, using weblogic. Debug.DebugStoreIOPhysical and we saw a lot of recovery after newspapers file storage is open.
  We have checked and checked our JMS transactions are completed successfully. We also checked that the current messages and number of courses is 0.
  We stopped the server gracefully, check that there are no messages pending.
  However, several times takes start server ~ 30 minutes due to heavy work on the persistence store.
  Compaction or remove storage of files eliminates the delay.
  However, we want to avoid the manual operations whenever we want to start the server.
  
  Please share your ideas.
  
  Thank you
  Itsik

  The only suggestions I have off the top of my head are:

  * Ensure (1) the host system has at least 2 GB (the store file size) memory physics in addition to the memory used by the current process, and (2) the host system is not rebooted between each restart WebLogic. If you ensure that both of these, then the operating system puts implicitly cached content of the file of the store in memory even between boots - when WebLogic starts subsequently storing files, the o/s should be the content of the file much more quickly.

  * You can move to a JDBC store. Runtime JDBC store performance are lower, but since you have generally has only a small amount of records to retrieve, startup performance should be higher in this case.

  * Not that it helps your case, but it happens that we have significant performance improvements of starting process for a future version (if all goes well a near future release).

  Tom

• After update on Mac, every time firefox starts with: problems recovering add en tabbladen

  Whenever I run firefox on my Mac after that I installed the latest update, each session starts with a problem window indicating: Excuses voor het ongemak. Firefox problems bij het van uw add en tabbladen recovering lapses. said wordt meestal een both geopende door quality page.

  The pages I used are different pages each time. I use Firefox for about 6 years now, never had any problems...

  I tried evertything: re - install, check plugins, cool - start, close the tabs, change Aperture site preference, clear cookies and history etc. Hours and hours... but the problem is repeated and it's annoying.

  There will be a new version with bug fixes?

  Thank you! Glad to know that the solution to the problem momentarily.
  It seems to work so far!

• "I update firefox from 7 to 8 and now when I run firefox every time it opens the page 'do start with firefox', in options I select the option ' display a blank page" How can I solve this problem?

  I update firefox from version 7 to version 8, now when I run firefox every time it itself open the Web "to start with firefox", in firefox options I select the "show a blank page" but his does not work. I use firefox on windows XP - SP2.

  Try to restart Firefox, the time of a page (s) after the beginning of a new version should disappear. In fact this last time with 8.0 they did not come to the top for me.

  If it works then raise Subject: config and insert the url of the page into the filter. Right-click on anything that appears and use "Reset".

• How to stop the tab 'Getting started with Mozilla Firefox' to open every time I open FF?

  Everytime I open FF, the tab "Getting started with Mozilla Firefox" opens. I checked and it is not in my list of homepage.

  If I open any additional windows, it does not open.

  But, once I close all the and reopen it again, the tab opens.

  I had a similar problem with some addons (ietab) do the same thing.

  I found the fix for it.

  About: config, filter for 'Start '

  Ones you want to should appear at the bottom.

  Startup.homepage_override_url and startup.homepage_welcome_url

  Double-click on each one and delete the text string. Close and reopen the window to check that it worked.

  As I deleted them both at the same time, I'm not sure who was the culprit. So, I suggest starting by striking first and tests before deleting this one.

• Solitaire T, pls help!... Can no longer start with Bootcamp after increasing the size of the partition with OSX El Capitan

  I hope that this message reaches solitary T and could help me.

  After an attempt to increase the size of my bootcamp partition, I can start is no longer with bootcamp, the same problems that many people lived in El capitan. I tried the instructions of solitary after but I'm stuck with this:

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that it is always disabled.

  I don't know what to do next.

  Would be grateful if I could get any help. Thanks in advance.

  BTW, I ended up remove the new partition created during the process.

  

• MacBook Pro (13-inch, late 2011) taking a long time to start

  Hey everybody,

  I have a Macbook Pro (13 inch, late 2011), which takes a long time so that it starts about 1 min. This should automatically start since I have an SSD. Right? Specs are below:

  2.4 Ghz Intel Core i5 processor

  8GB memory

  Boot disk (my hard drive name)

  Intel HD Graphics 3000 512 MB graphics

  500GB Solid State hard drive

  I reboot mac, remove all items from the startup items, reset the SMC. What else is there to do?

  You have installed TRIM?

  Ciao.

• Skype no longer starts with Windows, no more automatic connection (also very slow start)

  I can't deal with the bug of 'mark as read' but Skype no longer starts with Windows (even though it says that it should in msconfig) and there more no option password/auto login as before to remember. Skype always started automatically before 7.17, and it took a few seconds to start. Now, it takes about 2 minutes to click on the icon to connect. What is the problem with this version? Fortunately I've never known messages in the wrong order-bug.

  I use Windows 8.1.

  The sign of the Auto option should be available in the tools of-> Options-> General settings.

  https://support.Skype.com/en/FAQ/FA12081/how-do-i-sign-in-to-Skype-for-Windows-desktop

• I used numbers for a long time, but only make spreadsheets base.  With the latest updates, I couldn't change my information.  What Miss me?

  I used numbers for a long time, but only make spreadsheets base.  For about a year and with the latest updates, I couldn't change my information.  What Miss me?

  Hi Deb,

  There not really enough information in your message to help you. How things don't work, exactly? Is there any alerts or messages?

  Quinn

• Computer HP laptop 14-d004tx - takes a long time to start whenever I turned it on

  It really bothers me that my new laptop, (just a week) when takes a lot of time before it starts. After the HP logo, it displays a blank page where my cursor can be moved, so he'll stay a very long time so I find myself stopping and then turn on again and again until it finally starts.

  Is this normal? It really takes a lot of my time specially I use my laptop for work. What should do?

  Thank you! I really need help here...

  Hello
  
  Since it is a week it would be better to contact HP in your area & report it.
  
  Meanwhile, a test of full hard disk & memory test by pressing F2 or F10 as soon as you turn on the system and on entering the BIOS, pass-> component test system Diagnostics.

• Open FPGA references change to no. target when compiled with executable in time real start

  Hello again you useful forum fans!  I have a problem that I hope someone can give me a hand with.

  I have a project that has a Windows component and a component of the target in real time, that are running on a hypervisor type NI PXI-8110 system.  Communication both sides between them using shared variables.

  On the real-time side, I have four FPGA targets who are reading and writing various analog and discrete inputs and outputs.  I several periods loops which opens a reference to one of the FPGA targets during the first call, then pass this reference in several subVIs that read and write to panels prior to the FPGA.  The loops the FPGA reference thus made available and reuse it in the next iteration through the shift registers.  Each FPGA target has only a single reference open to him.  One of the loops is using the FPGA reference directly and does not pass it in any subVIs.

  It all works very well in the development environment, I can read and control inputs and outputs FPGAS via the front panel of the application of the side Windows.  It also works very well if I start the game real time in the development environment, and run the code of windows as a stand-alone executable file.

  However, when I compile the code in real-time in an executable startup and deploy it to the target, it does not work.  I enabled debugging on the executable, and when I connect to it via the operation-> debug executable in the menu, I see an arrow broken at execution.  Further investigation shows that each of the four open screw reference FPGA is now empty, the text under them is "no target" and the thread for reference on their part to my first Subvi is broken.  I need your help to understand how to operate as it does in the development environment.

  I followed the instructions of these two knowledge base articles to compile and download the bitfiles FPGA on the FPGA target and execute on start or restart:

  http://digital.NI.com/public.nsf/allkb/39795847AC67296D862575FB0046944F

  http://digital.NI.com/public.nsf/allkb/BC513C2A0DC29C89862574BF0002B0B9?OpenDocument

  Open FPGA reference screw are configured for the FPGA to build specifications that I created for each target in the LabVIEW FPGA project.

  I called technical support, NO phone, and yet were able to determine this one out, so additional "brownie" points if you do!  I would offer you the same no detailed screenshot that I have (I can't give more detailed code out because its owner, unfortunately), but apparently the forum doesn't like my image file, as I can't seem to load.

  Please let me know if you have any ideas regarding what is happening!  I appreciate it.

  Jon,

  I'm always up for the challenge.  Have you tryied recompile the FPGA VI that accesses the RT VI?  I also suggest to try and open the bitfile instead of the FPGA VI.  You run in dynamic mode (this is not a suggestion, it's just a question)? There is no difference if you try to open the FPGA VI reference outside the while loop, then past the reference to use inside the while loop without shift registers, then close the reference to the FPGA VI outside the while loop?

  Let me know if these suggestions makes no difference.