Starter Pack Express with sound
Hello
I'm setting up a starter pack worm 7.2.1 currently I am enrolled in an EX90 and I put a SIP trunk with Server 8,6 CM, I call back and forth (VCS SP <-->Ip phones). My next step is to registerd endpoints from the outside and deal in other areas to my SP. VCS
I have a doubt about how to define the public address. I want to try the best way to define a public address and reach outside of a call to endpoints from the outside. I'll try with portLAN2, but I do not understand why there is no default gateway option. and the only option I see is to use the external line
interface
concerning
Apart from what Zac mentioned. Discover the deployment guides and admin
http://www.Cisco.com/en/us/products/ps11337/tsd_products_support_series_home.html
With regards to routing, you asked, there are a couple of offers to here about it.
Like: https://supportforums.cisco.com/thread/2226253
In short, you can have a default route that points to the internet,
and for your local network add you additional static routes through the CLI.
Please remember useful frequency responses and identify useful or correct answers
and set it if it's an answer!
-->
Tags: Cisco Support
Similar Questions
-
UPDATE to VCSE VCS Starter Pack Express
Hello community support.
just a quick question for the upgrade process. With this key:
Video Communication Server Starter Pack Upgrade to VCS Expressway - TMS, Cisco Jabber Video for TelePresence 100 users CTI-VCSE-SPUPG-K9 TTC2-04
I can add as an option on my VCSESTRTPACK and remove the pack before starter option. After that, I have a VCSE without refueling.
But what of the Jabber user? How did the license provided for me?
Can I install just the touch option even on MSDS and this will add 100 user of Jabber for her? Or do I have to buy a separate license for this?
Thank you for the support :)
From what I found online:
- You can convert the Starter Pack, either a control or highway depending on what part number you use (CTI-VCSC-SPUPG-K9 or CTI-VCSE-SPUPG-K9).
- You will lose the integrated supply management and Jabber video/Movi licenses.
- You will retain licensing additional call that have been purchased on top of the base call licenses.
- You will receive basic application of TMS + 100 licenses video/Movi Jabber.
-
VCS Starter Pack Express 7.0.1 without DOUBLE NIC / Network configuration
Hello community,
can you please explain to me how to put a VCSESTRTPACK to the Internet? Just put the public IP address to the configuration of the Interface? I have just one public IP address, so I NAT? Or is it possible to make it work. I want to register outside, devices on Internet. Some evaluation criteria are behind NAT.
What the routing configuration and deployment of the network?
I'll put the VCSESTARTPACK for the server to register of external endpoints on the internet.
And for internal services use an MCU and the TMS. So I nedd to internal and external communication to my VCSESTARTPACK. Is it possible to connect a VCSC internal in order to increase enrollment?
Thank you
Duplicate messages.
Go here: https://supportforums.cisco.com/discussion/12263321/vcs-starter-pack-exp...
-
How to activate the two IPS on VCS starter pack express
I have the Starter of Cisco Express works with a single IP address using a NAT. This only works inside the LAN. To enable this machine on the internet, I bought the key option to double network interface. I enabled both interfaces, but I don't know how I should configure the two IPS by access from the internet. I tried to activate the static NAT, but it did not work.
There is only a single default gateway and this is where most of the traffic will be released and which should point to the internet router.
If you have addresses of internall more than 'LAN', you can simply add additional routes via the administration console.
As if LAN is connected to LAN2 192.168.150.0/24 and you 192.168.175.0/24 your home and where your laptops
router for tha is 192.168.150.1 you would add that, on the road to xcommand, add the command:
xcommand RouteAdd
*h 'xCommand RouteAdd'
"Adds and configures a new IP route (also known as a static route)."
Address(r): "Specifies an IP address used in conjunction with the prefix length to determine the network to which this route applies."
PrefixLength(r): <1..128> "Specifies the number of bits of the IP address which must match when determining the network to which this route applies. Default: 32"
Gateway(r): "Specifies the IP address of the gateway for this route."
Interface: "Specifies the LAN interface to use for this route. Auto: the VCS will select the most appropriate interface to use. Default: Auto"
for the example given, it would be (user admin via ssh):
xcommand road add an address: 192.168.175.0 LG: gateway interface 24 192.168.150.1: LAN2
But to be honest I'm not sure jabbervideo it works well with the highway espress in
a lan environment double anyway.
As with a vcs - c / e deployment you have the model of the internal and external with vcs
different hosts where he tries to get funding and then depending on who gets the data
for the record. It may be that in any case only get you external IP of the vcs-e.
I would therefore simply deploy a DMZ where the outside and inside can reach the starterpack with
the same address or even external ip using a NAT that is hosted in LAN1 put directly on a public ip address in a dmz...
-
Profile C40 with VCS Starter Pack Expressway system
Hello guys,.
Customer not want options like Firewall and the Conference (MCU 5300) crossing.
But as this is a small script (there around 2 profile C40 + 2 SX20 10 video Jabber), I found that it will be interesting using VCS Starter Pack Expressway. He's no more than 50 records or 25 route calls as shown in the data sheet 'support '.
I took a look at the topis here and also some documents and say that C40/SX20 are not supported for the supply, but since the SIP/h.323 support, calls should work perfectly.
No doubt: that the client will lose in terms of features or benefits without the support of this commissioning endpoints?
It would be a pain in the neck to enter the SX20 or C40 to VCS Starterpack expressway?
http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11305/ps11315/ps11337/data_sheet_c78-697075.html
Thank you!
Alan
Olá Alan, respenderei em inglês para fica na don't base dados, mas design sao best respondidas send any video Business forum.
About your 3 points, depends on:
(1) even if you deploy the TMS, endpoint will try to get the directory using HTTP/HTTPS connection. If the endpoints are outside / internet, it may be refused by security reasons.
(2) you can always configure auth on the StarterPack VCS to auth against the local database. At the endpoints configured manually, you can enter the identification information.
(3) you can configure the bandwidth on VC (subareas or pipes) configuration control or limit directly to each endpoint
The SX/MX/EX/C series can register the StarPack using a direct connection (h.323/SIP) or behind the FW/NAT using H.460.18/19 or assent. They can local Auth VCS DB. Be aware that the VCS S is usually installed in an external DMZ or directly with a public IP address. In this case, if you have 2 x SX to the internal network and the VCS at the DMZ (with NAT in the middle), all media will be hollow VCS, even if the two SX are on the same subnet.
PS: Be careful where to include the VCS. If you use NAT on the VCS, basic network license need double.
It will be useful.
Concerning
Elter
-
i ' v bought netbook with WIN 7 Starter pack. What to do for the installation of Ms Office
I ' v bought my first netbook (lenovo s205 mini) with windows 7 starter pack.
- How to install other things like desktop 03 or 07 & some other essentials windows?
- Also inform all other i ' v of things to do to make look & work better...
- I'm a great one of 7 has as snipping tool, sticky note all n... pls help me how to customize all the other n things also...
- Pls help me as soon as possible...
I ' v bought my first netbook (lenovo s205 mini) with windows 7 starter pack.
- How to install other things like desktop 03 or 07 & some other essentials windows?
Go to a computer with a CD or DVD drive
Insert your Office 2007 CD in the drive
Insert a USB key or an external hard drive with enough space (1-2 GB)
Click Start > computer (or computer if the computer is running Windows XP)
Open the Office 2007 disk (Browse)
Press Ctrl + A on your keyboard to select all files on the disk (if the computer is running Windows XP, click Edit > select all, then click on Edit again and copy or if its Windows 7/Vista, click on organize > select all, then click on organize > copy)
Return to the computer or workstation
Open the USB key or external storage device
Right-click in the storage device
Click new > folder
Give it a name
Open it
Press Ctrl + V on your keyboard to paste all the files on the disk to this folder (if the computer is running Windows XP, click Edit > paste, or if its Windows 7/Vista, click on organize > paste)
Close all windows
Eject the storage device
Carry it to the Netbook, insert it into an available USB port
Open the folder on the storage device the copy of Microsoft Office copy you
Run the file setup.exe on the disk
Proceed with the installation of Microsoft Office.
----------------------------
You can download Windows Essentials to:
http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-home
http://techingiteasy.WordPress.com/2009/02/28/installing-Windows-Live-Essentials/
- Also inform all other i ' v of things to do to make look & work better...
If you want features such as Aero Glass and the ability to change the background screen and themes, you need to upgrade to a higher edition like Windows 7 Home Premium:
Microsoft Windows 7 Anytime Upgrade [Starter to Home Premium]
- I'm a great one of 7 has as snipping tool, sticky note all n... pls help me how to customize all the other n things also...
You must upgrade to Home Premium for the capture tool. Click Start, type: Notes
- Pls help me as soon as possible...
-
VCS Starter Pack in a datacenter (fixed Behinde NAT)
Hi guys,.
We have a server express telepresence VCS starter pack and it worked very well in our dataline E2 Office but now after moving to a data center there is a problem with saving a customer Movi of VCS on the Internet.
The server installation is now this: VCS Starter pack firewall/Touter - Internet - Movi
The VCS is connected to the local network (internal data center network with an interface and static is using a NAT to the Internet with a router)
all ports are open in the firewall (incoming and outgoing)
And here are the settings in the VCs:
Default credentials - authentication - Check policy
By default, subzone - authentication policy - threat as authenticated
Also, here is the log of the attempt to save Movi from the public network (Internet):
26 Dec 14:11:21
"" "" "" TVCS: event = "Message sent" Service ="SIP" Src - ip = "10.29.10.43" Src-port ="5061" Dst - ip = "41.130.193.41" Dst-port ="59519" Protocol = "TLS" Num-bytes ="426" Level = "4" elements UTCTime = '2011-12-26 12:11:21, 714"
26 Dec 14:11:21
"" "" "TVCS: event ="responded"Service ="SIP"Src - ip ="10.29.10.43"Src-port ="5061"Dst - ip ="41.130.193.41"Dst-port ="59519"Protocol ="TLS"method ="FOLLOW"to ="sip: [email protected] / * /"code-response ="404"Level ="3"elements UTCTime ='2011-12-26 12:11:21, 714"
26 Dec 14:11:21
"" "" "TVCS: event ="application received"Service ="SIP"Src - ip ="41.130.193.41"Src-port ="59519"Dst - ip ="10.29.10.43"Dst-port ="5061"Protocol ="TLS"method ="SUBSCRIBE"Request-URI = 'sip: [email protected] / * /" Level = "3" elements UTCTime ='2011-12-26 12:11:21, 712"
26 Dec 14:11:21
"" "" "" TVCS: event = "Message received" Service ="SIP" Src - ip = "41.130.193.41" Src-port ="59519" Dst - ip = "10.29.10.43" Dst-port ="5061" Protocol = "TLS" Num-bytes ="998" Level = "4" elements UTCTime = '2011-12-26 12:11:21, 712"
26 Dec 14:11:21
"" "" "" TVCS: event = "Message sent" Service ="SIP" Src - ip = "10.29.10.43" Src-port ="5061" Dst - ip = "41.130.193.41" Dst-port ="59519" Protocol = "TLS" Num-bytes ="587" Level = "4" elements UTCTime = '2011-12-26 12:11:21, 643"
26 Dec 14:11:21
"" "" "TVCS: event ="responded"Service ="SIP"Src - ip ="10.29.10.43"Src-port ="5061"Dst - ip ="41.130.193.41"Dst-port ="59519"Protocol ="TLS"method ="FOLLOW"to ="sip: [email protected] / * /"code-response ="407"Level ="3"elements UTCTime ='2011-12-26 12:11:21, 643"
26 Dec 14:11:21
"" "" "TVCS: event ="application received"Service ="SIP"Src - ip ="41.130.193.41"Src-port ="59519"Dst - ip ="10.29.10.43"Dst-port ="5061"Protocol ="TLS"method ="SUBSCRIBE"Request-URI = 'sip: [email protected] / * /" Level = "3" elements UTCTime ='2011-12-26 12:11:21, 642"
26 Dec 14:11:21
"" "" "" TVCS: event = "Message received" Service ="SIP" Src - ip = "41.130.193.41" Src-port ="59519" Dst - ip = "10.29.10.43" Dst-port ="5061" Protocol = "TLS" Num-bytes ="661" Level = "4" elements UTCTime = '2011-12-26 12:11:21, 642"
Can someone help me understand why this happens?
Hi houari,.
There are several threads on this forum which explains the requirements for the deployment of a VCS in a private DMZ, you can find by searching for "VCS static NAT".
In short, when you deploy the VCS-E in a statically NAT'ed environment, it is necessary to have the option "Dual network interfaces" key on the VCS - E, this key unlocks the static NAT functionality of the VCS-E.
You can also find more information in the guide of the VCS for X7.0 Administrator.
Concerning
Andreas
-
Update of the oracle.iam.ui.custom - dev-starter pack
Hello
I created a super-simple library that I added to the oracle.iam.ui.custom - dev-starter pack. However, I'm not sure how to actually deploy such things, and what do you do with regard to get things to work.
That's what I currently have:
-Simple class called EchoUtils that has a method named 'getPing()' - this thing returns 'PONG', and that's all, nothing else.
-Defined the EchoUtils as a backingBean (I wish really is an applicationScoped-bean, but never min now). The configuration is simple:
<> managed-bean
<managed-bean-name>echoUtilsBean< /managed-bean-name>
< managed bean class >com.vegaasen.play.adf.utils.EchoUtils< /managed bean class>
<managed-bean-scope>backingBean< /managed-bean-scope>
< /managed-bean>
I tried to deploy the changes, but I'm just the following error all the time:
javax.faces.validator.ValidatorException: oracle.adf.controller.ControllerException: ADFC-10001: failed to instantiate the class "com.vegaasen.play.adf.utils.EchoUtils".
It matters little if I restart the entire server WebLogic, only the IOM or just to redeploy the package. The error persists throughout all my trials. So what the hell I am doing wrong? This is supposed to be so easy, so I don't understand how I can manage to screw it up .
What about a frustrated guy named Vegard
As my application doesn't have something special, I never saw this error message:
.. more than 74
Caused by: java.lang.UnsupportedClassVersionError: com/vegaasen/game/adf/utils/EchoUtils: version unsupported major.minor 51.0
at java.lang.ClassLoader.defineClass1 (Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)
at java.lang.ClassLoader.defineClass(ClassLoader.java:615)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:343)
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:302)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
... more than 82
.. Which explains everything. Well, then I know that there was nothing wrong with what I've done, it's just that I've compiled with jdk 1.7 stuff, when we IOM running on jdk 1.6.
Bah.
This error arose in the GUI when I accidentally saved my changes to the graphical interface, which was not intended. So my new question is this:
When I try the expression builder, where will the exception logging? I can't find them anywhere :-)
Kind regards
Vegard
-
Windows Media Player does not play with sound .m2ts.
WMP does not play with sound .m2ts. used for, it is no more. I tried the ms fix the thing did not help the cause. What can I do to fix this?
Hello
1. which version of the Windows operating system is installed on your computer?
2 have you made changes on the computer before this problem?
3. what version of Windows Media Player do you use?
4. are you able to play .m2ts files to other players?
5. what exactly happens when you try to play the file?
I suggest you try to install Codecs and see if it helps.
Codecs: Frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
See the following article from Microsoft to check the version of Windows Media Player.
http://support.Microsoft.com/kb/190990
Hope the information is useful.
-
Skype 'problem with sound recorder '.
After working perfectly for months, when I now try to use Skype I get the above message. CD works perfectly all the other its OK. Skype gave me a chapter and verse to uninstall and reinstall Skype without change. I guess the problem is in the web cam that contains the microphone and there is no purple light on that. What can I do else?
After working perfectly for months, when I now try to use Skype I get the above message. CD works perfectly all the other its OK. Skype gave me a chapter and verse to uninstall and reinstall Skype without change. I guess the problem is in the web cam that contains the microphone and there is no purple light on that. What can I do else?
"Problem with sound recorder" suggests that there may be a problem with your input device.
Open Device Manager (right click on my computer > properties > hardware > Device Manager) and search for "imaging devices". Click on the + to expand the category. There is a warning (yellow!)? Right-click and select Properties. Is it the box at low say "use this device (enable)"? If not, do so and click OK.
While still in the Device Manager, click on the + next to "Sound, video controllers and game." Locate the entry of your webcam microphone. There is a warning (yellow!)? Right-click and select Properties. Is it the box at low say "use this device (enable)"? If not, do so and click OK.
Take a look at control panel > sounds and Audio devices
Click on the tab "Audio". What is the default device for sound recording? It should be your webcam; If this is not the case, adjust it using the drop-down list box. Same thing for the "Voice" tab and the default device for voice recording. Be sure to click on the "Apply" or the OK button.
Click Start , point to programs , point toAccessories , point to entertainment and then clicksound recorder . That you get error messages when you open or you try to open the sound recorder? If so, please include the entire message, without paraphrase, in your response.
-
Failed to read the videos after the upgrade to Windows XP Service Pack 2 with Service Pack 3.
Original title: I recently updated my windows xp service pack 2 with service pack 3. sound suddenly day now, I can not play videos on my pc. Please help me on this issue.
Windows xp 2002
service pack 3
Intel celeron cpu 2.13 ghz
504 MB of ramHi Karthik,
You receive messages or error codes?
Given that you have upgraded to Windows XP service pack 2 (SP2) to SP3, you can try to upgrade the video card on your system and check.
We can refer to the computer or the device manufacturer's Web site and try to update the drivers.
-
I need a product key, I lost my Windows Vista Starter pack
I need a product key, I lost my Windows Vista Starter pack with HCL laptop with the product id 89571-OEM-7332204-00608
If you reinstall using the manufacturer's recovery media, you should not have a key for Windows
If you try ot turn on Office applications, you must purchase a license.
Your own product key for Windows is on the COA sticker on the case of the machine - or possibly inside the battery compartment.
-
'illegal start of expression' error then you are trying to compile an Extension WebWorks
Hello
I'm trying to compile a simple Extension of work Web to show a Dialog.alert (), just a simple code to start with Extensions WebWorks. The problem is that when I try to compile my code with javac I get many 'illegal start of expression' errors on the scene who has any errors. Here is the log from the console:
Nathan-Camposs-MacBook-Pro:webworks Nathan$ javac -source 1.3 -target 1.3 -deprecation -classpath /Developer/Applications/Eclipse/plugins/net.rim.ejde.componentpack6.0.0_6.0.0.43/components/lib/net_rim_api.jar -sourcepath /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/* /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:15: illegal start of expression public static final String FIELD_ALERT = "alert"; ^ /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:15: illegal start of expression public static final String FIELD_ALERT = "alert"; ^ /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:15: ';' expected public static final String FIELD_ALERT = "alert"; ^ /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:16: illegal start of expression private Alert _callAlert; ^ /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:18: illegal start of expression public AlertScriptable() { ^ /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:18: ';' expected public AlertScriptable() { ^ /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:22: illegal start of expression public Object getField(String name) throws Exception { ^ /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:22: ';' expected public Object getField(String name) throws Exception { ^ /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:22: ';' expected public Object getField(String name) throws Exception { ^ /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:22: not a statement public Object getField(String name) throws Exception { ^ /Users/Nathan/BlackBerry/WebWorksTest/webworks/src/org/webworks/os/interation/AlertScriptable.java:22: ';' expected public Object getField(String name) throws Exception { ^ 11 errors
Any ideas?
Best regards
Nathan Campos
I solved this. I was saying that all inside a constructor.
I'm sorry.
-
Hi guys,.
I have a problem with saving a customer Movi to a VCS Starter pack on the Internet.
My design is the following: Movi - Internet - router - VCS Starter pack (no TMS). The VCS is connected to the local network with a single interface and is static using a NAT to the internet with the cisco router that lies in front of it.
I am able to record the movi for the vcs client if the movi is connected to the network local lan. The setting on the vcs are simple:
Default credentials - authentication - Check policy
By default, subzone - authentication policy - threat as authenticated
When I try to connect customer movi home (over the internet - without VPN) I get this message:
20 Oct 14:05:45 "" "" "" TVCS: event = "Message sent" Service ="SIP" Src - ip = "X" Src-port ='5060"Dst - ip ="Y"Dst-port ="29284"Protocol ="TCP"Num-bytes ="426"Level ="4"elements UTCTime = '2011-10-20 11:05:45, 349" 20 Oct 14:05:45 "" "" "" "TVCS: event ="responded"Service ="SIP"Src - ip ="X"Src-port ='5060" Dst - ip = "Y" Dst-port ="29284" Protocol = "TCP" method ="FOLLOW"to ="sip: [email protected] / * /" code-response = "404" " Level ="3"elements UTCTime = '2011-10-20 11:05:45, 349" 20 Oct 14:05:45 "" "" "TVCS: event ="application received"Service ="SIP"Src - ip ="Y"Src-port ="29284"Dst - ip ="X"Dst-port ='5060" Protocol = "TCP" method ="SUBSCRIBE" Request-URI = 'sip: [email protected] / * /"Level ="3"elements UTCTime ='2011-10-20 11:05:45, 347" 20 Oct 14:05:45 "" "" "TVCS: event ="Message received"Service ="SIP"Src - ip ="Y"Src-port ="29284"Dst - ip ="X"Dst-port ='5060" Protocol = "TCP" Num-bytes ="987" Level = "4" UTCTime elements = 20 Oct 14:05:43 "" "TVCS: Event =" 20 Oct 14:05:43 "" "" "" "TVCS: event ="responded"Service ="SIP"Src - ip ="10.1.101.10"Src-port ='5060" Dst - ip = "109.166.141.13" Dst-port ="29284" Protocol = "TCP" method ="FOLLOW"to ="sip: [email protected] / * /" code-response = "407" " Level ="3"elements UTCTime = '2011-10-20 11:05:43, 726" 20 Oct 14:05:43 "" "" "TVCS: event ="application received"Service ="SIP"Src - ip ="Y"Src-port ="29284"Dst - ip ="X"Dst-port ='5060" Protocol = "TCP" method ="SUBSCRIBE" Request-URI = 'sip: [email protected] / * /"Level ="3"elements UTCTime ='2011-10-20 11:05:43, 726" I read
Cisco VCS Expressway Starter Pack - Cisco's TelePresence - Cisco VCS X5.1 Deployment Guide and I think I did all right, but because it doesn't work well I have right to sth.
Anyone have any ideaa of newspapers?
Thank you for your help.
A few notes:
* What vcs version do you use? There seems to be something > = 6 X
* check the field: cronus.ro is added as the sip domain and is also implemented announces the field in movi
* Are you sure that your password is correct?
* You can also try to set the default area, sub-area by default (and maybe other areas) of 'treat as authenticated' just to see if you can register
* you have the option "dual interface", should be in your fan
-
VCS Starter Pack - registration failure
I can't save my customer movi in VCS started pack x7.1
It keep ON message display
Connection failed
due to registration failure
If the problem persists contact IT support
Address findme, user account and local database accounts are configured with the same name/password
Default and default area sub-area together to verify the credentials.
I can solve the DNS with the public IP address that is configured in the VCS.
In the Journal, I get this error message on
Sep 15 13:36:01 "" "" "" TVCS: event = "error decoding" Service ="SIP" Src - ip = "219.92.14.189" Src-port ="50943" Dst - ip = "219.92.14.190" Dst-port ="5061" detail = "(no host valid in the URL of)" Protocol ="TLS" Level = "1" elements UTCTime = '2012-09-15 13:36:01, 285" Sep 15 13:35:58 "" "" "" TVCS: event = "error decoding" Service ="SIP" Src - ip = "219.92.14.189" Src-port ="50942" Dst - ip = "219.92.14.190" Dst-port ="5061" detail = "(no host valid in the URL of)" Protocol ="TLS" Level = "1" elements UTCTime = '2012-09-15 13:35:58, 402" Grateful if someone could help.
Thank you
Can ensure you that the FindMe ID for the user understands the SIP domain you use (example below) and repeat the test.
Maybe you are looking for
-
Thinking of adding Airport Extreme for Google Fiber
Hello world. Wanted to start a new question related to Google fiber... slightly different from the issue of Back2Mac earlier. I just Google fiber. House is wired throughout with CAT6. Wired connection works fine. Wireless is great, sometimes, but do
-
Are there adapters for a Satelite A205 IDE?
I just got a blue screen of death and would like to connect the hard drive to my office and fix it rather then send it offshore, but the connection to the hard drive is not a kind of standard.
-
ENVY 15 t-k200: how to find if my 15 t-K200 motherboard supports a backlit keyboard
I HAVE an ENVY 15 t-k200 AND would like TO KNOW HOW TO find OUT IF MY MOTHERBOARD SUPPORT a BACKLIT KEYBOARD
-
When running the few games I get the Error Message "" Name of the game"has stopped working. Please help me this.
-
upgrade from Windows 7 to windows 8 or 8.1
may I ask why the country Malaysia did not support purchase online! my foreign friends help me for the purchase of the 8.1 window, but when I install in Malaysia, its been working anymore... when installing, its always show out "Please check your int