"Starting Installshield Wizard '.

Similar Questions

• Lightroom 4.1 installation failure. InstallShield Wizard was interrupted

  Have tried to install Lightroom 4.1 twice now. Towards the end the InstallShield Wizard of Adobe Photoshop Lightroom 4.1 seems to have reported "the wizard was interrupted before Adobe Photoshop Lightroom 4.1 could be completely installed." Your system has not changed. "I have LR 4.0 installed successfully. On Win7 Ultimate. Any ideas please?

  Post edited by: Digital.Geoff. I mentioned earlier the virtual keyboard of Windows but, on reflection, it was a "red herring." If the virtual keyboard /was/ associated with the InstallShield dialog box as it would have appeared /after/ dialog box appears, not before, so it is impossible that who would have interrupted the installation.

  I had installation problems in the past and have now resolved by disabling the anti-virus protection for the duration of the installation procedure (Kaspersky 2012).  Certainly worth a try.  I just installed the latest version of 4.1 on a PC running Windows 7 64 pro.

• How to start the wizard for the Driver NI-VISA development

  IM reading this manual:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4478

  I have labview8.6 on this pc, and I installed the driver NI-VISA 4.6... the manual says:

  "" "" 1. to open the DDW, select Start ' programs ' National Instruments ' VISA ' VISA Driver Developer Wizard.

  but the thing is, the menu of VISA, there are a few documents... There is no VISA Driver Developer Wizard... but I installed the driver NI-VISA 4.6... any ideas?

  In fact this explains the problem. You install DURATION VISA. If you re-run the installation program, you will see the feature tree seems different from that displayed a stone.

  The component you need, driver development Assistant, is in full VISA distribution, which you can download from the link below. The runtime is usually designed for deployed application. The development tools are absent of the runtime and are in the full distribution.

  http://Joule.NI.com/nidu/CDs/view/p/ID/1370/lang/en

• I seem to have a problem with the accessibility, the start-up wizard he show s up and the lens will not close

  I can't stop the Accessibility Wizard, it starts at the start, I don't know how turn off I tried, but always there especially the Magnifier start it will be not just off until she start. I have not need it.how I keep them to start at startup?

  Hello

  I suggest you to see link below and check if it helps.

  Disable accessibility options: http://windows.microsoft.com/en-US/windows-xp/help/turn-off-accessibility-options

  Hope this information is useful.

• Cannot install Nikon View NX 2 software photo, error: installshield Wizard was interrupted before installation could be completed.

  Original title: Installshield installation wizard.

  I try to install the image of Nikon View NX 2 software (or any future software by the way) on a PC with Windows 8. Whenever I make an attempt to install the software, installation is cancelled and I get a message saying that the installation wizard was interrupted before installation could end and try again later. The message provides no further explanation as to why it has been discontinued or what I can do about it. We have only a user on this PC with (to my knowledge) full administrative access. In addition, this computer is fairly new and was bought with windows 8 is already installed. Does anyone know how to fix this?

  Hello

  Try right click on the installer and select properties and then compatibility at the top tab.

  Partial Compatibility Mode check down, and a select previous operating system... whatever that worked on before...

  Sometimes, the problem is in the InstallShield Setup program...

  Sometimes, it can be extracted in a regular folder with a program like 7Zip...

  You can then set the compatibility of the Setup program in the folder...

• No activation in my Start menu Wizard. Where can I find it?

  I need to reactivate my XP Home Edition (in the next 3 days!), but I don't have in my menu start the Activation Assistant.  How/where else can I find?

  Enter the following text in the box run from the start menu:

  %systemroot%\system32\oobe\msoobe.exe /a

  John
  

• How to fix error Code Installshield Wizard 5005

  I installed a new printer from EPSON 410 a year ago.

  Have been away from home for half a year and my printer did print more just the pictures not text.

  I couldn't get it working properly, so I thought that I uninstall and reinstall the printer again.

  BUT I can't get rid of Epson Easy Photo Print.

  I always get an Error Message 5005: (0 x 80070002)

  What can I do to remove the progaram, as every time I try to change/fix or remove it I gt the same message?

  I would like to help, please!

  If you have multiple boot partitions, then change the Windows Partition to be the active partition and see if that solves the problem or backup your data and restore to factory settings, I have seen this problem with corrupt windows. http://appuals.com/best-fix-steps-fix-error-0x80070002/

• First 11 items I install on Surface 3 of my DVD Player Pro.  At the point where the installshield Wizard will begin to install, a box appears that says Adobe Premiere elements 11 - Setup

  I get error 1006.  The volume of a file has changed on the outside so that the opened file is no longer valid.

  This is a new laptop

  Any ideas?

  tadpole of computer

  What operating system is involved?

  What you describe seems to fit the profile of Surface Pro 3 with facilities other than just first 11 elements.

  You have copied the contents of the installation disc on the hard drive of the computer, and then tried to install the program from its present setup.exe file on the hard disk of the computer?

  It works for you?

  RTA

• Conductor of telepresence-Install Wizard starts do not.

  Hi all

  So I try to get an instance of telepresence driver running in my environment.  I have deployed the .ova 3.0.2 and 2.4.1 on different ESX hosts, but whatever the version or host when the device initializes and I connect with the user by default and password it just goes straight to the # prompt.  I am never prompted with the Setup Wizard.

  Someone at - it suggestions?  Y at - it a command to start the Wizard manually?

  If you get a sign # and not prompt for configuration wizard, it looks that you are logged as root.  Can you provide a screenshot to check?

  You must sign in with the username "admin" and password "TANDBERG" If that's all new deployment.

• vCenter Converter: Installshield Error 1335 data1.cab P2V Wizard

  I'm installing vCenter Converter v4.3 (P2V) on a Windows XP SP3 computer.

  The installation process fails with:

  "Error 1335: Cabinet file data1.cab required for this installation is damaged and cannot be used.".

  This is an error of Installshield Wizard.

  I checked the Md5 of the file installation (VMware converter-all-4.3.0 - 292238.exe) and it is correct.

  I used a copy of the installer on another computer Windows XP SP3, and installed correctly.

  I tried the following unsuccesully, the same error occurs each time:

  1 / /Unregister and then/regserver MSIEXEC

  2 / deleted MSI. DLL, MSIEXEC. DLL, MSIHND. DLL and re-installed the latest Installer Microsoft MSI v4.5.

  3 / delete C:\Program Files\Common InstallShield

  4 / implemented a fix registry CAB file.

  5 / rebooted the PC in a minimum configuration (MSCONFIG to disable all services by default, no provision of the automatic launch at system startup, but)

  6. completely uninstalled antivirus, firewall

  7 / made sure the path of the destination folder is short (ex. C:\VMC)

  Any suggestions please let me know.

  Randy

  during extraction worked among other files, you should find an MSI - you can doubleclick as MSI

• InstallShield interrupted when you try to install a program - 4 Help - on Vista Business 64-bit

  I tried to reinstall 4 contribute from a file downloaded from Adobe. Whenever I try to install, I get a message saying that the "InstallShield Wizard has been interrupted and the program was not installed.  Please try again. "I deleted the folder InstallShield to start over, but I still get the same error message. I am doing this on a laptop with Vista for businesses. I tried to download the file and install it on my desktop running on XP, and installed without problem.

  The problem, it's just on my laptop with Vista.  I tried to install with my disabled antivirus software, but has always failed.

  I was on the phone with Adobe technical support, and so far they cannot understand it, although they say that contribute 4 is not supported on 64-bit Vista.  I find this strange because I ran Contribute on this notebook since July and only had problems recently (where the need to uninstall and reintall - who is at the beginning of my InstallShield problems).

  Any suggestions?  I'm no expert, but I can follow simple instructions.
  Thank you!

  Hi Donlas,

  Welcome to the Microsoft Answers site.

  1. make sure that you have full administrative privileges on your computer

  2. of course no other applications (including antivirus software), facilities or processes are running in the background. A clean boot helps eliminate software conflicts. The following link has steps showing how to perform the clean boot. http://support.Microsoft.com/kb/929135

  (1) perform the clean boot

  i. Click Start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  II. in the general tab, click Selective startup.

  III. under Selective startup, clear the check box load startup items.

  IV. click the Services tab, select the hide all Microsoft Services check box and then click Disable all.

  v. click OK.

  VI. When you are prompted, click on restart.

  VII. after the computer starts, check if the problem is resolved.

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135 .

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (i) click Start, type msconfig.exe in the start search box and press ENTER. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  (II) on the general tab, click the Normal startup option, and then click OK

  3. check that two instances of the configuration are not running.

  a. press Ctrl + Alt + Delete.

  b. Select the Task Manager.

  c. Select the processes tab.

  d. search for _INSXXXX._MP. Where XXXX are numbers. If there are two similar (they are not the same) treats those currently running, select and click on end process.

  e. Select Yes to the dialog box implementation task manager warning.

  4 run the installation locally by copying the files to be installed on your local hard drive.

  a. browser using Windows Explorer to the location the installation files. For example, if the installation is on a CD, go to the CD-ROM drive.

  b. copy the contents of the installation location.

  c. temporarily paste them into a directory on the local hard drive. For example, the desktop computer.

  d. run the install, setup.exe or install.exe file.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to start the installation of Adobe Captivate 3

  
  When I try to install Adobe Captivate 3, the first windows installation program "title: Adobe Captivate 3 - Setup" is the "Welcome to the InstallShield Wizard for Adobe Captivate 3" have two choices:
  -Then or
  -Cancel.
  If we click on the next button, the same windows appear, again and again, the only thing we can do is cancel the installation. I don't have any error message.
  
  PC configuration:
  We use Windows XP Pro SP2 French (I already try with an English version).
  Adobe Flash Player 9
  I try on a new installation of Windows Vista (on a new HP) and have the same problem.
  Try the demo version of Captivate 3 and with the original CD same problem.
  
  Thanks for your help.
  
  
  
  

  We found the problem.

  The "locale" prevent installation to start properly.
  (We use a version in French of Windows XP Pro with 'Regional framework' value 'English - Canada')
  If place us "English - us" installation can be completed without error.

  Maybe we can replace "English - Canada" (or your specific parameters) after installation
  was completed.

  So good luck to you french friends!

• How do I start bluetooth on Satellite M40-184

  Hello
  I bought a new Satellite M40 and I found that I have the Bluetooth Manager, but it does not show me the that Bluetooth at all besides it still gives me the message "Bluetooth device is not ready" even when my bluetooth is turned on! Kindly let me know how to solve this problem, as I have been through the whole pages of starting Instructions and possible help, but nothing seems to work. Thanx

  Imran

  Hello Imran

  It will be interesting to know what unit should be connected to your device (mobile phone, printer). I hope that use you the FN + F8 key combination to activate the Bluetooth connection. If the Bluetooth connection is enabled you can start a wizard and search for other Bluetooth devices.

• Instead of the wizard of recovery HARD drive recovery

  Dear all,

  I would like to re - install the OS on my Satellite Pro T130 laptop without changing the partitions. This is possible with the http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm Recovery Wizard

  However, when I boot my laptop with the Advanced Boot Menu (F8), I think the recovery menu of disk in the System Recovery Options, no recovery Wizard.

  I tried to start this wizard by starting the computer with the button zero (0) at the top, but it did not work. I closed the windows, pushed and held 0, turned on my laptop, when Toshiba logo appeared I sill held the key zero and instead of the Recovery Wizard, open windows.

  I tried at least 10 times and it's getting frustrating.

  I bought this laptop in Hungary in 2010.
  I was wondering that Toshiba offers the two (HDD Recovery + Recovery Wizard) on their laptops or older laptops recovery options came with only HDD Recovery?

  If the start procedure with the zero key does not work, what can I do?

  In addition, I understand the difference between HARD drive recovery and Recovery Wizard is as follows: (please, correct me if I'm wrong)

  HARD drive recovery is re-definition of the manufacturer State which means that it removes all the data in each partition. When you turn on the laptop first time computer, a wizard will appear so you can partition the hard drive. As out-of-box + customization option in the Recovery Wizard.

  Recovery Wizard has three options: out of area (described previously), customization of partitions and recovery without changing the hard drive partitions. I want to use this option, so will not delete all the data of the first partition of the hard disk (drive C). Is no data on other partitions like D, E (etc.) readers.

  Am I wrong?

  Thank you for your answers,

  Kind regards
  Kardos52

  Hello

  According to the specifications of the laptop this Satellite Pro was offered with the version preinstalled Win7 and Windows XP Home edition recovery DVDs. Win7 preloaded includes preinstalled Toshiba recovery disc creator tool so the laptop owner can create recovery (bootable USB key) media which includes the original image of recovery for Win7. This bootable USB key can be used for recovery image installation if there is a problem with the installation of HARD drive recovery.

  As I see you have a problem with the installation of HARD drive recovery, so my question is: did you create this recovery media? You, and you can use it for installing Win7?
  > However, when I boot my laptop with the Advanced Boot Menu (F8), I only find the recovery menu of disk in the System Recovery Options, no recovery Wizard.
  Toshiba HDD Recovery option in the system recovery options will be available if phone has settings to factory only.
  > I tried to start this wizard by starting the computer with the button zero (0) at the top, but it did not work. I closed the windows, pushed and held 0, turned on my laptop, when Toshiba logo appeared I sill held the key zero and instead of the Recovery Wizard, open windows.
  Why don't you use zero to startup? Where did you find the description that you use NRA to launch the installation of HARD drive recovery? I can see in the document validated by Toshiba, you need to use F8 only. When you use F8 and enter advanced startup options is option fix my computer available or not?
  > I asked Toshiba offers the two (HDD Recovery + Recovery Wizard) of the recovery options on their laptops or older laptops with single HDD Recovery?
  All portable Toshiba offered with Win7 preinstalled have Toshiba HDD recovery option but only if they have the factory settings. If the owner of the laptop installation version of the OS option no longer available. In this case, you can install original recovery image using recovery media created.

  From my experience, you should only use the out-of-box option. Be careful with the other options. Recover a custom size partition may lose all the data and recovery image too.

  More important is: you have a recovery (USB or DVD) media or not?

• Want 4500 Scan to computer cannot be configured to start automatically

  In the Envy Series 4500 HP printer Assistant under 'Manage the computer analysis' that one is supposed to be able to click on a checkbox so that the feature is enabled on startup (Windows connect).

  However, on my system, this box does not (cannot be verified) and I have to go and click on the button "Activate" on each session when I want to analyze manually. (Windows 7 Home Premium, 64 bit SP1, HP Pavilion dv7 Notebook PC)

  Is this a known bug or is me live it? Anyone know what might be wrong or wheather it work around, as an alternative way to start the service?

  Kind regards

  Mattias

  .. Finally managed to do work, and the solution was simple. I only had to start the wizard by using 'Run as administrator' (right-click with the mouse on the icon), and then the desired option is clickable.

  Support HP BTW began to ask what version of Windows (by e-mail), I was using - just embarrassing. Well, at least they don't recommend uninstalling all other drivers, wait 30 seconds and reformat the drive.