Starting the program or the registry

Similar Questions

• Computer does not start, the registry is damaged. What should I do?

  Original title: I have a computer gateway running vista home. The computer does not start and system repair fixed. The error is the root cause "registry is corrupt. What should I do?

  My system stopped responding and I had to make a hard stop.  When I tried to restart the computer, I had a mistake of lying to start automatically.  Commissioning and repair screen came and did his thing.  He was not able to solve the problem. The end result was an error indicating that the registry has been corrupted.  What should I do to get my computer running again?

  Hi Laurayne,

  You can read the following article and try to boot from the disk Installation of Windows Vista to perform a restore system from Windows Recovery Environment.

  What are the system recovery options in Windows Vista?

• By default the monitors of the printer in the registry missing__

  I have problems with a printer/scanner.  Then, I started to follow all the procedures in your forum on the problems of printer and usb.  I came to the procedure which you enter in the registry underHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors

  the subkeys for the default printer monitors are missing.  How can I restore them?  Not having is not the default printer monitors will prevent from appearing in the box printer/Fax printer?

  The spooler starts very well.  I have WinXP SP3 on my pc. Anti-virus software McAfee with automatic updates of cox.  AMD athlon 2000 + 1.66 ghz, 80 g HD, 2 GB of ram.

  What is a thread?

  Here is the part of the info I'm talking that I copied from one of the forum questions answered, below.

  When you click Start and then click Printers and faxes to try to view your printers, no printers appear. This problem may occur even if you have a printer installed.

  Thirdly, remove the registry entries for the default print monitors

  Remove the print monitor subkeys can be problematic, which can interfere with the printer you want to use. These may have been installed by the installation programs third-party printer. Follow these steps to keep the print monitors and comes with Windows registry entries and remove all others who may ask questions.

  Start the registry editor if it is not open. To do this, click Start, click Run, type regedit in the Open box, and then click OK.

  Search for, and then expand the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\MonitorsView the list of subkeys. It should only be the following subkeys for the default print monitors:

  ·       BJ language monitor

  ·       The local port

  ·       PJL language monitor

  ·       Standard TCP/IP port

  ·       USB Monitor

  If there are any subkeys other than the subkeys listed in step 1, do the following:

  On the file menu, click Export.

  In the file name box, type the name you want to use for this key, such as MonitorsRegkey and then click Save.

  When I looked in the registry, under regedit.exe, monitors default printer in bold above weren't there.  How can I restore them?

  I just wanted to say thank you very much!  That was the problem with my printer does not.  Once I loaded the info above in the registry and restarted the system, my printer has appeared in the box printer/fax and I was able to print a test page.

  Thanks for your help!

  amber6

• When you install Microsoft Streets and Trips 2010 download. He wrote not correctly in the registry. Program does not start.

  I had problems with my version of Streets and Trips 2008 and decided to upgrade. After installing Microsoft Installer, I get the same error message. "the program has not been copied correctly in the registry. Rerun Setup from the same place. »

  Try the procedure suggested Installation problems streets & trips 2010

  If that does not solve the problem with your new streets & trips 2010, tell us what problems you have experienced with your earlier version of streets & trips 2008. Only has the old installation refused to start, or other issues?

  You can look for answers and advice associated with Microsoft Streets & Trips to the forum: http://www.laptopgpsworld.com/microsoft-streets-trips/

• Can not register opimize: when I start computer, a window opens opimize the registry failed

  When I start computer a window opens opimize the registry failed

  Hi Harry,.

  Looks like you have some program registry installed and programmed to run at startup, which does not work.  I suggest we identify and remove the boot and then remove it totally from the system (uninstall).  Registry modification programs are generally risky, rarely do much good, can cause great harm and are not really necessary as Windows does a good job of managing the registry on its own.

  Try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once don't forget to reset your operating system to normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  I hope this helps.

  Good luck!

• Error: "C:\Program Files/reviversoft\Registry Reviver\unins000.msg"is missing." "Fix the problem or get a new copy of the program.

  Original title: cannot start computer

  Cannot start computer

  This response comes and does not let me start the computer (Message missing file 'C:\Program Files/reviversoft\Registry Reviver\unins000.msg "is. Fix the problem or get a new copy of the program) what should I do to get the computer?

  Hi Dan Maarsman,.
   
  -Did you change on your computer before this problem?
  -Do you have any third party registry cleaner program installed on your computer?
   

  Start your computer Safe Mode and check if you can successfully start.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  For more information, see:

  A description of the options to start in Windows XP Mode

• When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

  When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

  C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

  I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

  Any help?

  Hello

  Try the following steps:

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Windows fails to start due to the registry error

  Original title: this is a double whammy.

  My windows XP crashed he keeps coming with the registry cannot load the hive (file0\systemroot\system32\config\software. I know there is a way to solve this problem through the reg change but do not know how. Also, I thought I could get around this by installing windows xp home edition on a different partition. the problem is that I forgot to put it as a dual boot. Now I have the same windows xp on a partition. Fortunately, we're on the C:\ drive and the other on the D:\drive. Help, please. Thank you

  What does 'crashed' mean to you?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  You will see messages like this if the file system is corrupt and XP just cannot play or read the file, then XP stops loading and complains.

  Rarely, it means that the file is really corrupted or missing (unless it happened by human hands).

  Run chkdsk /r from the Recovery Console XP will straighten the file system if nothing else is wrong and that I would always start by chkdsk/r when these types of messages are encountered.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk /r on your hard drives may solve your problem completely.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• HL-DT-ST DVDRAM GSA - T10N ATA Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  My DVD/RW drive stopped responding on my Acer Aspire laptop computer 4510Z I checked the Device Manager which is gives the following error message:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I solve this error so far achieved the following without success:

  -Checked for solutions using the button below the error message
  -Scanned for hardware changes
  -Used Microsoft Automated Troubleshooting Service (SMAT)
  -Created the cdfix.reg file, it has added to the registry and restarted the computer

  I would be so gratefull for any help anyone can offer.

  Darylandgoats

  Hello

  I oddly found the solution to my problem while browsing through the suggestions of SpritX at the following link: http://forums.techarena.in/vista-help/771598.htm

  Here is the solution I implemented and now my drive works perfectly:

  RESOLUTION
  Warning serious problems might occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps: 1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  Be careful it can be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
  3. in the right pane, click UpperFilters, and then click on remove.
  4. click on Yes to confirm the deletion of the UpperFilters registry entry.
  5. in the right pane, click LowerFilters, and then click on remove.
  6. click on Yes to confirm the deletion of the LowerFilters registry entry.
  7. exit the registry editor and then restart the computer.
  Note When you delete the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall all of the programs involved. If the problem persists, contact the program vendor to determine if an update is available for the program.

  For information about how to contact computer software vendors, click the number in the following list to view the article in the Microsoft Knowledge Base:
  65416 (http://support.microsoft.com/kb/65416/) hardware and software contact information, A - K

  60781 (http://support.microsoft.com/kb/60781/) hardware and software details, L.-P.

  60782 (http://support.microsoft.com/kb/60782/) hardware and software contact information, Q - Z

  Thank you!

• Error message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged" and dvd burner does not

  Original title: dvd burner does not work can not load the driver

  I get this message "windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.

  Can someone help me?

  Hi Garry_x,

  1. were you able to use the DVD burner before with no problems?

  2. you remember to make changes to the computer recently?

  This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  You can check out the following link and check for the resolution:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx

  You can also read the following article and check if it helps:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

• Vista does not recognize my dvd ram drive, or a drive__Windows hard usb cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Error message when you open Device Manager and clicking on the dvd player. Drive does not appear in the window 'computer '. Max_devices downloaded, but it couldn't fix the problem.

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Every starts the program

  Open all programs, I get the message next-
  C:\windows\system32\dcginstr32.dll is not designed to run on windows 32 or it contains an error.
  How can I fix this.

  Hello

  Use above message for intense and thorough check for malware.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  ===================================
  ===================================

  If necessary: to determine what type of program is the cause after checking for malware.

  To search for older programs try these:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• What are the security risks by allowing a program to change the registry keys in Windows 7, without knowing what are the changes?

  Original title: security risks by allowing a program to change the registry keys in Windows 7, without knowing what are the changes?

  What are the security risks by allowing a program to change the registry keys in Windows 7, without knowing what are the changes?

  Hello

  If you had made any changes in the registry without taking the backup copy of the registry, then there could be chances that your computer can find themselves in no situation to start and finally end up in the reinstallation of the operating system; This is why it is recommended to take a backup changed in the register of representation.

  Before editing a registry key or subkey, we recommend that you export, or make a backup copy of the key or the subkey. You can save the backup copy to a location that you specify, for example, a folder on your hard drive or a removable storage device. If you make changes that you want to cancel, you can import the backup copy.

  . Are what program you referring?

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Error message: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete" and DVD disc is not recognized.

  Original title: My DVD drive is not recognized, it works physicaly works fine, but the pc does not even detect it exists.

  The error that says: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I did a backup and restored my system to the factory settings. After doing this still dvd was not recognized. I don't know what to do, my computer is new and Security told me that they will restore the pc and try to fix it, I can't risk my documents of the University are the same that has not worked for me before.
  Could someone help me?
  -The pilot is the last in line.
  -The works of reader dvd but the computer is not reading it, it does not even appear on the section 'computer '.
  -J' tried to use a "fix - it" on Microsoft online, but it doesn't work anymore.
  -My OS is Windows 7.
  -A restore factory settings did not work at all.
  Thank you.
  Claudio Nahmad
  Mexico City

  Hi, Claudio Nahmad,.

  This error can occur if the data in the registry for the device and its driver has been corrupted.

  Since you have already done a factory restore, leave, try to uninstall and reinstall the driver CD\DVD and check if it helps.
  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  We can also refer to article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The above links contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry

  You can also try to install Windows updates, including optional updates driver and check if that helps.

  Install Windows updates in Windows 7

  Hope the helps of information.