Startup Repair runs whenever I turn on my laptop. Why?

Similar Questions

• Whenever I turn on my laptop the first thing he tells me is that Pamke.exe has stopped working.

  Original title: pamke.exe

  Whenever I turn on my laptop the first thing he tells me is that Pamke.exe has stopped working. Can someone tell me please, what the heck is trunosc? I googled but no dice. Is there something wrong with my laptop? How can I fix? I'm kind of a perfectionist, and I'm tired of seeing it every day. Any help would be greatly appreciated. Thank you.

  Hello

  1. When did you start to question?

  2 did you recent hardware or changes to the software of the system?

  Method 1:

  You can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  You can also read the following article to run the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Whenever I turn on my laptop, a Dial-up "connection" window appears in the middle of my screen asking me to "select the server you want to connect.

  Original title: Dial-up connection

  Whenever I turn on my laptop, a Dial-up "connection" window appears in the middle of my screen asking me to "select the server you want to connect," even if I'm already connected to the Internet...  How can I get rid of the popup window?  All my updates are installed.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Search for the issue in the clean boot state.
  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

• Whenever I turn on my laptop screen is upside down. How can I fix?

  Whenever I turn on my laptop screen is upside down. How can I fix?

  Hello

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right-click on empty office rotation - graphics options.

• Whenever I turn on my laptop, the system time is the same as when I stop it, how to fix

  Hello

  I have HP DV6 - 2130ca. I recently had a bug that were not work my quick commands. A support forum, I got to know that if I take my batteries for laptops and power and press the power for 30 seconds he'll fix it. Well, he got the problem solved but since then I am having a problem.

  Whenever I turn on my laptop, time is the same as when I stopped him. For example, if I 'Shut Down' or 'Sleep' at 2: 00 and turn it on, to 17:00, the time would still be 14:00 on laptop.  I tried Googling and found a lot of answers slightly different questions on several support forums by using the Task Scheduler to schedule a task to update time only every 5 min etc, but that did not work.

  If I update manually time using time settings Internet, set time until I turned off my laptop or put it to sleep.

  Please help me. Thanks in advance :)

  Hello
  Thanks for your reply.
  The box is already checked and checking windows files took about 15-20 minutes to complete but "Resource Protection Windows not found any breach of integrity"

  Another way to solve my problem? BTW, I tried to search google for solutions, do something else planned and edited another, but not luck...

  Thanks in advance

  Hello

  Have a look here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/how-to-fix-incorrect-file-timedate/1823408f-B0AC-4CAF-a5f4-81242f0d4f74

  Step 3 and 4 could be an easy first try!

  Try the answer here! See if that helps!

  This article may also be useful

  http://www.thewindowsclub.com/Windows-time-service-not-working-synchronization-fails-error

• Whenever I turn on my laptop windows8 he said installation update

  Original title: diane

  everytime I turn on my laptop windows8 he says install update sometimes up to 150 then after about45 minutes, it changers and said could not update so come back back that takes at least another 46 minutes and nothing, I won't let me on until all this is done can someone help

  Make sure you have the windows update service active

• my laptop keeps popping up the bus enumerator Markou whenever I turn on my laptop. I tried to fix the problem w / without success.

  It's annoying, I tried to install without success.  Pop - up said that it would turn off my computer.   This notebook is a gift from my brother last week.

  I want to just pop up to stop appearing.  I'm not very computer savvy and don't want to mess up my new computer.  My laptop that is running Windows XP 64-bit

  If you Novatel Wireless devices, see about updating its drivers. As said by Kosh, look in Device Manager for any indication of missing or damaged device drivers and update.

  Note:

  I suspect that your brother had once a Novatel wireless modem attached, so ask him.

• Whenever I turn on my laptop, the internet is disabled.

  I do not understand why everytime I open my lap top, internet is disabled.  Is it because of my j.4?

  Hi the big J,

  1. When did you start to question?

  2. did you of recent changes on the system?

  3. you receive messages or error codes?

  Step 1:

  You can check if the problem occurs in safe mode with network.

  Startup options (including safe mode)

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with networking, you can try to perform a clean boot and check...

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After you resolve the problem, see the section on boot link to reset the computer to start as usual.

  Step 3:

  You can also temporarily disable third-party security software and firewalls installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• Processor/fan continues to run even after turning off the laptop

  I'm using Inspiron 15 3542

  I've updated my OS to Windows 10, but sometimes will not stop the fan from the processor/even after discontinuation of the laptop (as well as the display goes off)! The fan continues and continues. And after this laptop won't turn on even! I have to open the battery, and then it lights up!

  I downloaded almost all the software required for my laptop dell for Windows 10 x 64 software download through bit.

  PS: I searched the forum google/checked, and the solution I found was to download Intel Management Engine. I did download and install it, but the problem seems to stay...

  Kindly help and thanks in advance!

  Sorry for the double post!

  Found a solution: https://www.dell.com/support/home/in/en/indhs1/Drivers/DriversDetails?driverId=NFY3D&fileId=3497768106&osCode=WT64A&productCode=inspiron-15-3542-laptop&languageCode=EN&categoryId=FW

  I have installed, be informed after several tests

• Hi whenever I turn on my laptop I have a blue screen and a search of disc it says verification system fat 32 file and then when its finished, it begins to freeze how do I fix this, you can

  everything on the internet

  I'm not sure that "everything on the internet" has to do with your topic, but it looks like your hard drive is dying.

  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it. MS - MVP - Elephant Boy computers - don't panic!

• startup repair problem.

  I have an acer aspire 5920 equipped Windows vista and only recently, it has had problems with the start up. whenever I turn on the laptop Startup Repair guard arise and checks the system for problems. After a few minutes its says "windows cannot repair this computer automatically" and "If you have recently attached a device to this computer, like camera or portable music player, remove it and then restart your computer...". "When I cliquerai finish it again the whole process.
  I tried running on safe reboot of the last good configuration mode. and it starts repairing appears again.
  Help, please. Thank you.

  As the system restore does not work, try this:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If this fails, the Acer Recovery Options:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  See you soon.

  Mick Murphy - Microsoft partner

• Loop continues with the Startup Repair tool

  Whenever I turn on my laptop (Dell Studio 17 which is using Windows Vista), it executes the Startup Repair and then says it can't find any solution to my problem so I click on finish and it stops. It never gets past that point. This problem has come completely out of the blue!  I have nothing connected to the USB ports, and I recently downloaded software or updates.

  The details of the problem are:

  Problem event name: StartupRepairV2

  Signature of the problem 01: AutoFailover

  "' 02: 6.0.6001.18000.6.0.6001.180000

  ««03: 2»»

  "'04: 65537.

  "' 05: unknown.

  «"06: CorruptFile»»

  ««07: 3221226021»»

  "" 08: 3

  «' 09: WrpRepair»»

  ""10: 1168.

  If there is a solution in which I lose any of my files, it would be greatly appreciated!

  Thank you

  I suggest you start troubleshooting with the following diagnostic tests.  They will save you a lot of time and grief if there is a hardware failure, and you have records on site in case you need it in the future:

  H/W Diagnostics:
  Please start by running the diagnostics bootable hardware:
  http://www.carrona.org/memdiag.html (read the details at the link)
  http://www.carrona.org/hddiag.html (read the details at the link)

  Post back with the results of the tests and we'll go from there. -John ( http://www.carrona.org/index.html )

• Satellite C650-17Z: (new!) startup repair problem

  A few weeks ago, I used the Toshiba restore disk to fix my laptop to its original state. However, I have now faced a similar problem. I have shut down prematurely on startup 'Starting Windows' screen, which then caused the Startup Repair to launch when I rebooted my laptop a few hours later.

  What could be the results if the startup repair does not fix anything, since there is no set system restore points.

  Hello

  Wait a second time: your ad is a bit confusing

  This means every time on starting Windows screen, the computer stops and the next time you get message startup repair or what exactly?

  Hmm, what other programs and drivers that you installed after recover installation?

  You can start Windows in safe mode?

• Vista constantly crashes whenever I turn on Satellite A300

  Hello

  I have a Satellite A300 and every month or so I have the problem that Vista freezes constantly whenever I turn on the laptop.

  I made 2 HARD drive Recovories who have always allowed the fault, but this time, when I tried a restore from the HARD drive, the system told me that "HDD1 not found, cannot perform recovery".

  Don't know what is happening, I also seem to have a snoring constant fan going.

  Any advice?

  Thank you.

  Hello

  For me it sounds like that, it could be a HARD drive problem because recovery tells you he can find a disk of the t

  Have you checked your hard disks to find errors? You can do this with a special tool, for example Drive Fitness Test.
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  I have good experience with this test program to check this! It s freeware and easy to use.

  Welcome them

• Windows 8.1 Bluetooth MIcrosoft Wireless Notebook Presenter Mouse 8000 not connected whenever I turned on the PC

  I have windows installed 8.1 and since I did it whenever I turned on the laptop Dell Bluetooth mouse not connect I need to remove it and pair it again.

  Before the upgrade to windows windows 8.1 8 it was working properly.

  What can I do?

  It worked well. The difficult thing was to remove all drivers before installing new.

  Thank you