State of error / of 0xc0000056

Similar Questions

• W3 - 810 driver Power State failure error (BSOD)

  I have a W3-810 Iconia I've upgraded to Windows 8.1 and Windows 10. During a recent update to the 2016 office, I had a blue screen and an error message that a failure of State driver had taken place and the computer needed to restart. After a few moments, the computer restarted and I was able to complete the installation of Office 2016. I remember getting this error during upgrade to Windows 10. Recently, while watching a YouTube video, the Tablet locked up and I got the blue screen again, with the same "Driver Power State Failure" error again. I check the Device Manager and noticed that in the "system devices" all of the "Intel platform dynamics and thermal framework (DPTF)" associates pilots had yellow flags indicating that the drivers did not work properly. When I tried to update the drivers I get a message that the latest drivers are installed.

  Someone at - it recommendations to solve this problem? Should I uninstalled all the drivers DPTF and reinstall? Thank you.

  Update: I drove all DPTF drivers in back to version 6.2.9200.30457 Device Manager and then restarted the computer. I tested the computer to see if I could cause a BSOD pilot State failure occurred earlier today and it does not happen again. I hope that this solves the problem. Thank you.

• Disabled user account control, when try to turn on the States of error message "you don't have the appropriate permissions to perform this action.

  Disabled user account control, when try to turn on the States of error message "you don't have the appropriate permissions to perform this action.

  What type of account selected for this account you upward?

  And your administrator account is now or not?

  go in Start > Control Panel > user accounts see what is written under your username.

• That means the State of error / of 0xC000185?

  Hello

  I am running Windows Vista with 3 GB of RAM.
  It was working perfectly fine until I had the LCD screen of my laptop screen replaced.

  Now, the system start and all programs start also is loading properly.

  But when I click on anything either (start icon, Windows Explorer, etc.), the system becomes extremely slow and unresponsive.
  After about 2 minutes of waiting, he throws the following popup: -.

  -------------------------------------------------------------------------------------------------------------------------

  The instruction at 0x724D49E7 referenced memory at 0x6BA80D30. The required data has not been placed
  in memory because of an error of e state / of 0xc0000185.
  Click OK to terminate the program
  -------------------------------------------------------------------------------------------------------------------------
  I want to know if this i/o error is because of my newly replaced LCD screen and what it means in general.

  If you can shed light in how it can be fixed, it would be maybe great.
  Reformatting my system is not an option (but that's what my hardware vendor suggested).

  Kind regards
  Amit

  //
  MessageId: STATUS_IO_DEVICE_ERROR
  //
  MessageText:
  //
  The I/O device reported an error of e/s.
  //
  #define STATUS_IO_DEVICE_ERROR ((NTSTATUS) 0xC0000185L)

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution. You can also right-click and choose Details for more information. Post these details here.

  To see if any recent system change caused it

  In Control Panel (and select Classic discovered in the left pane) choose Administrative Tools and then choose reliability and performance monitor and choose the monitoring tools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date (scroll left to see earlier dates). See if your plant has started to happen after you installed or uninstalled something.

   
  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   
  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  If the results are transferred to the startup time events logs chkdsk, then the results are probably in the following file c:\Bootex.log. This file is removed when the results are placed in the event logs.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

   

   

• Installation of stata Fatal error

  I use a version of windows 7 and I tried to install the software Stata 11. I could not install and the message is "installation ended prematurely because of a fatal error. Help, please

  See that program/support site

  http://www.Stata.com/support/FAQs/Windows/

• Session state protection error

  Hello

  I get an error on the browser Internet Explorer (doesn't happen in chrome), which States "Session State protection violation: this can be caused by manually editing the protected page P11_NEW_FLAG point." If you don't know what caused this error, contact the administrator of the application for assistance. Contact your administrator for the application. "

  
  

  I don't know why this error because the element P11_NEW_FLAG is NOT protected at all. Here's the security properties are attributed to him:

  
  

  
  

  

  It has a readonly condition associated with him making it readonly based on some logic PL SQL.

  I don't know where to start debugging? What can be the root cause?

  Thank you

  Sunil Bhatia

  Hi Sunil Bhatia,

  Sunil Bhatia wrote:

  Hi mohamed,.

  No, its not hidden item, it's a FLAG (Checkbox) I display on the front end. There are readonly. I debugged and error occurring only when the box is read-only. It automatically creates checksum argument.

  Other settings to watch?

  Thank you

  Sunil Bhatia

  You use the condition parameters of article readonly?

  CheckBox and select items does not in HTML readonly property. ReadOnly checkbox in the case of Oracle APEX is setting the disabled property. Therefore, on presentation of the page it is originally the error of session state protection.

  An easy way to do this is to write a dynamic action (run Javascript) to disable the checkbox if necessary:

  $("#P11_NEW_FLAG").attr("disabled",true);
  

  But write a front page submit dynamic action (run Javascript) to activate elements disabled on the page, so that the layout of the page works fine:

  $("#P11_NEW_FLAG").removeAttr("disabled");
  

  Reference: Apex tips and tricks - an easy way to make read-only items

  I hope this helps!

  Kind regards

  Kiran

• Word key missing in to_number conversion in the SQL statement select error

  ORA-00905: lack keyword for the below SQL statement error. It should be of to_number (m.EQUIP_SUB_CLASS_ID, '9999')
  between 3800 and the 3699 where Clause. Is that what I miss in the SQL below?
  
  

  SELECT  M.EQUIP_NO,M.EQUIP_CLASS_ID, M.EQUIP_DESCR,M.ORG_ID
    from  MAMIS.EQUIP M
   where M.EQUIP_NO in  (  SELECT  M.EQUIP_NO  from  MAMIS.EQUIP M, MAMIS.ORG O 
  where upper(M.ORG_ID) like upper(O.ORG_ID) 
  and length(replace(translate(M.EQUIP_SUB_CLASS_ID, '0123456789', '000000000'), '0')) is null
  and upper(M.fleet_status) like 'ACTIVE'  
  and upper(M.ORG_ID) not like 'NA'  
  and to_number(m.EQUIP_SUB_CLASS_ID , '9999') 
  between 3699 and 3800  )

  Hello

  I don't see obvious errors.

  Whenever you have a problem, please post a full test script that people can run to recreate the problem and test their ideas. Include CREATE TABLE and INSERT statements for all of the tables involved and the results desired from these data. Format your code so people can read and understand.
  See the FAQ forum {message identifier: = 9360002}

  I saw a couple of things you need to know about Oracle, but none of them would cause an error "Missing key word".

  There is no point in using the LIKE operator if you do use wildcards. For example

  upper (M.fleet_status)      like 'ACTIVE'  
  

  is slower than, but otherwise equivalent to

  upper (M.fleet_status)      = 'ACTIVE'  
  

  What are you trying to do here?

  length ( replace ( translate ( M.EQUIP_SUB_CLASS_ID
                              , '0123456789'
                      , '000000000'
                      )
             , '0'
             )
         )               is null
  

  Want to see if m.equip_sub_class_id consists only of numbers, from ' 0 'to 9'?
  If so, you can simply say

  TRANSLATE ( m.equip_sub_class_id
         , 'X0123456789'
         , 'X'
         )          IS NULL
  

  Depending on your front end, you may need a sem, i-colon (;) the end of your query.

• "View Composer agent initialization state random error.

  We use 4.0.1 build-233023 with linked clones with persistent desktop computers and we get "View Composer agent State (6) initialization error: unknown failure (expected 0 seconds)" errors that occur randomly after commissioning.  I've read several articles that indicate to restart the virtual machine will fix that, while it's very embarrassing that it works.

  However, we receive this error on the VMS, after commissioning and users have already connected to the virtual computer.  So if the VM goes to an error state, users get an error indicating that the office is not available!  A restart/reset of the user's virtual machine will correct this, but it would not be feasible.

  A - someone to find a permanent solution to this?

  Thank you very much!

  Food for thought: I removed all the variables unnecessary excesses on the 'Run' button and changed my script to restart to wait 30 seconds to run.  This time, the refresh of the Office were 0 errors (usually I see 1 or 2 with the initial thrust).  Once is not a trend, but I wanted to throw it out there.  The other thing, we've changed is diminished the simultaneous provision to the vCenter server to '1' (just in case this error is caused View Composer have too busy).  I will update if things do not work in the long term with the fixes above.  Thank you!

  Brandon

• CQL - incorrect statement query error: select an in > > inputChannel

  Hello
  I am new to the cep of the oracle, I wrote a simple query...
  
  "Select * from inputChannel KEEP 5 EVENTS" but some how it shows the error like.
  
  Invalid statement: "select a certain > > inputChannel RETAIN < < 5 EVENTS.
  Cause: generic syntax error
  Action: The syntax is expected ' [(', as, match_recognize, xmltable, fin de fichier, ' ') "'", ",", where group,]
  seen, order, left, right, score, on, primary token
  
  Any help is greatly appreciated.
  Thank you
  S.Vishal

  You are using EPL and not CQL. EPL is removed. You can try equivalent construct CQL - [LINES [5].

• Help! It drives me crazy. Report CASE (missing operator) statement syntax error

  Hello
  
  Can anyone help with this SQL statement please. It uses a CASE statement but again I get a syntax error (missing operator) error message. The SQL statement runs without the CASE statement, so everything else is fine - it's just when I put the CASE back statement in.
  
  Here is the SQL statement:-
  
  SELECT transactions.ourRef, transactions.transDate, CASE WHEN transactions.transTypeID = 2 THEN transactionDetails.goodsVatable *-1 ELSE transactionDetails.goodsVatable END, transactionDetails.goodsNonVat, transactionDetails.VAT, transactionDetails.grandTotal, clients.clientCode, transTypes.transTypeDesc
  Operations, customers, transactionDetails, transTypes
  WHERE transactions.transID = transactionDetails.transID
  AND transactions.clientID = clients.clientID
  AND transactions.transTypeID = transTypes.transTypeID
  
  TransID = 2 means that it is a credit not instead of a Bill, that's why I want the goods vatable returned as a negative number.
  
  Thanks in advance.
  
  Wez

  Quote:
  .. .the customer wish for me to use a MS Access db

  Too bad that you said that in a first time. I think you can consider using IIF() with access.

  Syntax: IIf (expr, truepart, falsepart)

  SELECT transactions.ourRef,
  transactions.transDate,
  IIf (transactions.transTypeID = 2, transactionDetails.goodsVatable *-1, transactionDetails.goodsVatable).
  transactionDetails.goodsNonVat,
  transactionDetails.VAT,
  transactionDetails.grandTotal,
  clients.clientCode,
  transTypes.transTypeDesc
  Operations, customers, transactionDetails, transTypes
  WHERE transactions.transID = transactionDetails.transID
  AND transactions.clientID = clients.clientID
  AND transactions.transTypeID = transTypes.transTypeID

  Phil

• key not valid for use in a specific State. Error number is from 1603.

  Skype is dead and can not reinstall it. error message of invalid key for use in the specific condition'. " Error number is from 1603. I've seen the solutions posted on this and other sites, but they are rather intimidating for someone not TCE. Skyp/Windows will provide a solution anytime soon? Or is it easier to use alternative.

  M

  Download and run the following program:

  http://community.Skype.com/T5/Windows-desktop-client/upgrade-causes-error-1603/m-p/3667341/highlight...

  RESTART, and then try to reinstall the latest version of Skype.

• SQL Server problem at startup - States of error SQLEVN70. RLL corrupt... How do I uninstall this driver & run Setup again?

  This error appears only in the beginning upward... I can clear the error by pressing close. It does not seem to cause any problems with any of my applications, but it is annoying when I turn on my computer and this error message. Your help would be appreciated if someone can give me the steps to correct this.

  Hello

  The problem is with SQL server, I suggest you to send your request from the link and check.

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• How should I address the following error message? State of error / of Oxc000009c

  error message

  When you get this error message? What are you doing? Also, please provide a description of your computer, its equipment and its recent history, so we can help you. MS - MVP - Elephant Boy computers - don't panic!

• States of error Spooler SubSystem App does not work when I print

  When I try to print anything it either tells me that the Spooler SubSystem App does not work.  How can I fix it.  I have reloaded my printer, but still does the same thing.

  Hello

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Thin State capture error - could not open the WIM file!

  
  

  Either way, error 112 means it runs space. If the error can be:

  1 USB disk is saturated.

  2. the source is corrupted - it usually caused by not enough space for sysprep to completely configure the device for capture.