Statement and analytical framework deployed on the application server has failed

Similar Questions

• Standard deployment failed installation foundation services deployed on the application server

  Good day ~

  Let me preface this with I have very limited exposure to Oracle products - thank you for your patience.

  I was busy learning, to install and prepare the Oracle EMP 11.1.2.3 components.

  Environment:

  New installation - I use Oracle Enterprise Performance Management System Standard Deployment Guide and the Guide of Installation and Configuration.

  Windows 2008 R2 - single server for all instances.

  SQL 2008 R2 - on a separate server.

  I started with the deployment guide Standard following all the steps for "installation of the Services of the Foundation" and at the end of the installation, it shows 'Impossible' for these red x products/task and status said Configuration is complete.

  The newspaper that I pointed at by using 'Help' EPM_ORACLE_INSTANCE/diagnostics/logs/config/configtool_summary.log says:

  (10 December 2013 12.48.49 PM): move the Foundation Hyperion [000 min 37sec] [PRE] - pre-configuration

  (10 December 2013 12.48.49 PM): pass [000 min 00 sec] [COM] Hyperion Foundation - the common settings

  (10 December 2013 12.49.48 PM): pass [000 min 58 sec] [COM] Hyperion Foundation - configure Oracle Configuration Manager

  (10 December 2013 12.49.52 PM): move the Foundation Hyperion [000 min 03sec] [DB] - database configuration

  (10 December 2013 12.50.01 PM): pass [000 min 04 sec] [PRE] Provider Services - pre-configuration

  (10 December 2013 12.55.40 PM): pass [005 min 38 sec] [PRE] Performance Management architect - pre-configuration

  (10 December 2013 12.55.41 PM): pass [000 min 00 sec] [REG] Performance Management architect - register with Shared Services

  (10 December 2013 12.55.44 PM): pass [000 min 03sec] [DB] Performance Management architect - database configuration

  (10 December 2013 12.56.15 PM): pass [000 min 30 sec] [VCC] Performance Management architect - configure the server of Dimension

  (10 December 2013 12.56.32 PM): pass [000 min 17 sec] [PRE] Essbase Studio - pre-configuration

  (10 December 2013 12.56.33 PM): pass [000 min 00 sec] [REG] Essbase Studio - register with Shared Services

  (10 December 2013 12.56.38 PM): pass [000 min 04 sec] [DB] Essbase Studio - database configuration

  (10 December 2013 12.56.38 PM): pass [000 min 00 sec] [PRE] calculation Manager - pre-configuration

  (10 December 2013 12.56.38 PM): pass [000 min 00 sec] [REG] calculation Manager - register with Shared Services

  (10 December 2013 12.56.39 PM): pass [000 min 00 sec] [DB] calculation Manager - database Configuration

  (10 December 2013 12.57.39 PM): pass [000 min 59 sec] [PRE] Reporting and analysis - pre-configuration

  (10 December 2013 12.57.40 PM): pass [000 min 00 sec] [REG] Reporting and analysis - register with Shared Services

  (10 December 2013 12.57.47 PM): pass [000 min 07 sec] [DB] Reporting and analysis - database configuration

  (10 December 2013 12.58.14 PM): pass [000 min 27 sec] [FSC] Reporting and analysis - configure the Services Framework

  (10 December 2013 12.58.15 PM): pass [000 min 00 sec] [RMI] Reporting and analysis - configure the Ports of RMI financial statement

  (10 December 2013 12.58.56 PM): failure [000 min 40 sec] [APP] Hyperion Foundation - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Provider Services - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] performance management architect - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] performance management architect - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] calculation Manager - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Reporting and analysis - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Reporting and analysis - deploy to the application server

  (10 December 2013 12.58.56 PM): failure [000 min 00 sec] [APP] Workspace - deploy to the application server

  (10 December 2013 12.59.18 PM): pass [000 min 21 sec] [PRE] financial management - pre-configuration

  (10 December 2013 12.59.28 PM): move financial management [000 min 10 sec] [HDC] - DCOM configuration

  (10 December 2013 01.00.56 PM): move the Foundation Hyperion [001 min 27 sec] [WEB] - configure the Web server

  (10 December 2013 01.00.56 PM): pass [000 min 00 sec] [LWA] Hyperion Foundation - configure a logical address for Web Applications

  (10 December 2013 01.01.41 PM): iron loop [000 min 03sec] [BEW] on the task pane

  Newspapers are vague and I don't know where to go from here. Any ideas?

  Thank you in advance.

  Hello

  Please check if you are able to run Weblogic if you use as a Weblogic application server.

  Because it is the application server that establishes the communication between components.

  Thank you

  Amith

• Deploy to the Application Server is not on a distributed environment

  Hi all
  
  I try to configure the new verion Hyperion 11.1.2.2 on distributed environment, but during the configuration of the calculation to the failed server application manager and get error message like "deploy for Application Server has failed." I don't know what is the problem and how to fix it. I tried to read the log files, but I am not able to undersantd where to watch and to debug this issue.
  
  My Hyperion environment view as one below: -.
  
  1. I used Microsoft VMWARE to build my Enviornment Hyperion
  2 - I created 1 Server 2003 domain window and 4 clients in this domain. (All these systems have windows 2003 server is installed). I have the name given to each client server i.e. system A system B, System C system D
  3. I installed SQL 2005 and created data bases for all components of Hyperion that is Shared services, Manager of calculation, epma on a system
  5. I have installed and configured the services foundation and weblogic server on a system b. (in this system, I have installed and configured the SSP, weblogic, workspace and able to deployed application server on the same system)
  6. on a system, I am able to complete installation for hyperion Performance Management architect and Manager of calculation and be able to complete all the type of configuration for these two, but as soon as the system tries to configure all associated with the SERVER APPLICATION services that it fails to configure. On a configuration system summary page shows everything is configured, but APPLICATION SERVER says FAILED written on a red colored letters.
  
  I explored the log files and found that calculation Manager server application doesn't have to be deployed or to be deployed on the application server is not...
  
  Since then, I don't know where to look and how to debug this issue, I ask all friends of hyperion to help and guide me to debug as I tried to install this product since last Friday and still no out put...
  
  I'll be really grateful if someone sharing his wisdom to help me...
  
  Thanks to all in advance...
  
  Thank you
  Safi

  Have you installed on the machine of the Foundation as well as the machine that they will be deployed in all web applications on WebLogic.

  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• R & A deploy to the application server fails for 11.1.2.3 analysis (Web)

  I installed 11.1.2.3 on a Windows 2008 R2 server. When configuring, deploying application server breaks down Reporting and analysis. The most funny thing is during Setup it says finished with a "tick". When I touched the Panel of the tasks once again it tells me the application server deployment failed. There are no entries in the stderr configTool. It is the Application Web Java Analysis Web that has not deployed. Has anyone seen this in the latest version?
  
  Thank you
  Ted.
  
  Published by: Teddd on June 6, 2013 14:18

  The safest option is to always retrieve all available parts never type you questions like that, I trust never theory you need to some parts.

  In fact you get points to solve your own questions, I can see the concept to provide the answer but surely you cannot assign points.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• REP-51002 link to the report server has failed 12 c forms

  Hi all

  I call report forms 12 c but my error report server name is rep_wls_reports_kalpataru started successfully see image.

  

  

  REP-51002 bind to the rep_wls_reports_kalpataru Server report failed in 12 c

  Run the code in the report button

  ----------------------

  DECLARE

  PARALIST paramlist;

  n number;

  p_file_name varchar2 (200);

  BEGIN

  P_FILE_NAME: ='C:\Oracle\Middleware\Oracle_Home\reports\'|| the user | "Employee" | ". PDF ";

  paralist: = Get_Parameter_List ('param_list_main');

  IF id_null (paralist) THEN

  PARALIST: = CREATE_PARAMETER_LIST ('param_list_main');

  ON THE OTHER

  Destroy_Parameter_List (paralist);

  PARALIST: = CREATE_PARAMETER_LIST ('param_list_main');

  END IF;

  ADD_PARAMETER (PARALIST, 'P_DEPT_NO', TEXT_PARAMETER,: DEPT.) DEPTNO);

  Report_Print (p_file_name, 'PDF', 'EMPLOYEE.rdf', PARALIST);

  Destroy_Parameter_List (paralist);

  END;

  How to print report

  -----------------------

  PROCEDURE Report_Print (p_file_name varchar2, varchar2, varchar2, p_paramlist paramlist p_report_filename p_desformat) IS

  rep_id report_object;

  v_rep varchar2 (100);

  v_report_server varchar2 (100);

  v_report_path varchar2 (100);

  v_servlet_url varchar2 (500);

  v_job_id varchar2 (100);

  BEGIN

  v_report_server: = 'rep_wls_reports_kalpataru ';

  v_report_path: = 'C:\Oracle\Middleware\Oracle_Home\reports ';

  v_servlet_url: = '127.0.0.1:7779/reports/rwservlet ';

  rep_id: = find_report_object ('report1');

  set_report_object_property (rep_id, REPORT_SERVER, v_report_server);

  set_report_object_property (rep_id, REPORT_EXECUTION_MODE, batch);

  set_report_object_property (rep_id, REPORT_COMM_MODE, SYNCHRONOUS);

  set_report_object_property (rep_id, REPORT_DESTYPE, file);

  set_report_object_property (rep_id, REPORT_DESFORMAT, p_desformat);

  set_report_object_property (rep_id, REPORT_FILENAME, v_report_path |) » \'|| p_report_filename);

  set_report_object_property (rep_id, REPORT_DESNAME, p_file_name);

  v_rep: = run_report_object (rep_id, p_paramlist);

  V_JOB_ID: = SUBSTR (V_REP, INSTR (V_REP, '_',-1)+1);

  web.show_document ("http://'||") v_servlet_url | ' /getjobid' | V_JOB_ID, "_blank");

  END;

  Please someone guide me to solve this problem.

  Solved the problem by adding a COMPONENT_CONFIG_PATH in the default.env file.

• Statement and analytical framework 11.1.2.2

  Hello

  Recently we have applied the fix 500 (18659116) to 11.1.2.2 servers.  When you see the scope of Reporting and analysis, it was still the old version, all other updates to 500.

  We have EN and Web Analytics.

  

  Versions of the product are always updated and RAF gets rarely updated, have a read of more to life than that...: include the versions of the product in the workspace

  See you soon

  John

• How to find the url of adf application that has been deployed to the glassfish Server? I try but? It is the image of the page.

  Mr President

  This is the page of the glassfish Server

  

  How to find the url of adf application that has been deployed to the glassfish Server? I try but? It is the image of the page.

  

  In the jdev web module are

  [11: 09:38] wrote the Web for F:\backup of AshCMS\AshCMS\ViewController\deploy\AshCMS_ViewController_webapp.war application Module

  [11: 10:33] wrote the Module Enterprise Application to F:\backup of AshCMS\AshCMS\deploy\AshCMS_Project1_AshCMS.ear

  [11: 10:33] Application deployment...

  [11: 14:24] Application deployed successfully.

  [11: 14:24] time to deployment: 8 minutes, 11 seconds

  [11: 14:24]-deployment is complete.  ----

  what url in the browser.

  Concerning

  Mr President.

  I run my application on built-in web logic server and get the url from there

  http://localhost:7101 / ViewController/faces/MainPage

  then simply change the localhost of 7101 to 8081 as below

  http://localhost: 8081, ViewController, faces, MainPage

  and it works

  Concerning

• was on a website and now cannot accrss now because I get a web page saying in the Application Server error ' / '.

  In the Application Server error ' / '.

  I was on a website and now can't accrss now because I get a web page saying in the Application Server error ' / '.

  Hello

  1 have had any changes made to the computer before the show?

  2. which antivirus software do you use?

  3. what Internet Explorer that you are using?

  Method 1:

  Try to disable add-ons in Internet Explorer 9 and check if it helps.

  How to manage add-ons in Internet Explorer 9

  http://Windows.Microsoft.com/en-us/Windows7/how-to-manage-add-ons-in-Internet-Explorer-9

  Method 2:

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

  (Also applies to Internet Explorer 9)

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this information is useful.

• UCCX 10.6 - Error Message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again"

  Hi guys,.

  My client has a solution with UCCX 10.6 and the system presented today, in the morning (08:00 more or less) followed the error message: "the request to open a session in the Unified Cisco CCX application server has expired. Please make sure your system is online and try again." After a minute the system back to work without nothing action. I saw the newspapers MIVR and not identify the possible cause of the problem.

  Can I help me, please

  Thank you

  Wilson

  These newspapers are not in a readable format. Look for something like lost connection

  Concerning

  Deepak

• Whenever I open a creative cloud application adobe (such as Photoshop, Flash, AfterEffects etc.) it takes so long to open, and then after a few seconds, it freezes and I have to close the application ("force quit"). What happens here? Th

  Whenever I open a creative cloud application adobe (such as Photoshop, Flash, AfterEffects etc.) it takes so long to open, and then after a few seconds, it freezes and I have to close the application ("force quit"). What happens here? Thank you

  If it's all programs of cc,

  Uninstall (properly using the uninstall programs) all cc

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud and use the app to install your programs of cc.

  If it's only some programs of cc who are broken, reset their preferences-

  Acrobat: https://forums.adobe.com/thread/1595848?start=0&tstart=0

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  hearing: https://forums.adobe.com/thread/1079494

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InCopy: https://forums.adobe.com/thread/526990

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Hi rogerk94701487,

  Could you please check the event viewer and let me know the path of the defective Module once.

  How to check the event viewer: Photoshop CC 2015 crashing very frequently

  Kind regards

  Tanuj

• I heard that we might try Lightroom for free for 30 days, once I wanted to try it but the download was so long that at the time he was downloading I changed my mind and stopped the download and delete each 'part' of the application. Now, I want to try it

  I heard that we might try Lightroom for free for 30 days, once I wanted to try it but the download was so long that at the time he was downloading I changed my mind and stopped the download and delete each 'part' of the application. I now want to try it finally but it says I can she... Is it possible to understand? I don't want it before trying it...

  Please check: software Adobe to trial has expired at the beginning

• I'm trying to uninstall the primary collection of the creative suite 5, but every time I try to do so, a message appears to close the application of google chrome and even when I close the application, the message continues and I can't uninstall. I tried

  I'm trying to uninstall the primary collection of the creative suite 5, but every time I try to do so, a message appears to close the application of google chrome and even when I close the application, the message continues and I can't uninstall. I already tried to shut down the internet, but the message is still

  Check your task for a chrome process manager.

  or restart your computer and start the uninstallation.

  After uninistalling, clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems