Static command error
What to say and how to solve?
Pix2 (config) # 10.20.7.0 static (inside, vpn) 10.20.7.0 255.255.255.0 0 0
maximum number of connections should be between 0 and 65535
Use: [No] [(internal_if_name, external_if_name)] static
{
[
[No] [(internal_if_name, external_if_name)] static {tcp | udp} {
[
netmask keyword is missing static (inside, vpn) 10.20.7.0 NETMASK 255.255.255.0 10.20.7.0 0 0 Salima Tags: Cisco Security Since October 24, my filters do not work yet. In addition, when you try to delete a message from the Inbox, a window appears which says: "The current operation on"Inbox"has failed. The e-mail server for the account... responded: command error. 12." The message I try to remove the remains in the Inbox. Technical information: Mac OS X Lion 10.7.5, Thunderbird, 24.6.0 and 31.2.0 (error for two versions of Thunderbird). FOUND A SOLUTION. It is a solution, but it does not solve the original problem which seems to be a matter of MS Exchange Server of the 2013CU6 update. All printed on July 20, 2011, but not July 21, 2011, so I did a restore of the system to 17 July 2011 and she removed only a 'Pause' on the printer, but not this following error message: printer says: "command error, treatment" and will print on "restart", or "will it delete what is on the reel-Help? 1) Start > type services.msc Scroll down and click on print spooler Click on stop the service Click Start the Service Close the window Go to control panel > open the Printers folder Right-click on the printer, and then select open The documents are displayed in the queue? If they are, click on the printer and select Cancel all Documents Close the window and restart the system 2) Uninstall the printer software/driver Restart the system and install the software/driver Update driver software My installer of Windows probably corrupted, as it gives the "this installation package cannot be opened. "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package" message during the installation of some programs. I'm now using Windows 7, but the problem has been around for my Vista installation. I am unable to do a clean install of the operating system that didn't record because I bought 7 through the Win741.com agreement. I tried several things, like the safe mode, the command msiexec \regserver (maybe wrongly? "He wouldn't take it without space), and nothing works. I guess I should add that I tried it works as an admin too, given that always gets mentioned - and probably should be. Help? You are welcome to help. To exclude a problem with your user account can you try an another user account with administrator privileges (create one if nessary) and then try to install the applications of this account. Nice day I try to run the following command through ssh racadm set the BIOS. BiosBootSettings.BootMode BIOS and I get the following error ERROR: RAC947: invalid object specified. If I don't have racadm get BIOS. BiosBootSettings.BootMode I can see the current value. I try BIOS, bios, Bios but no luck... Any help? Can you let me know the iDRAC FW version installed on the server. You need to use following command to set the BIOS boot mode. This command attribute value is case-sensitive racadm set the BIOS. BiosBootSettings.BootMode Bios I get "You don't have privileges to run this command" error When I try to watch a video in full screen the error keeps popping up. Or when I try to sign into Skype this error pops up. I searched the web, trying to find a solution to fix this error, but none of them have the same problem as I do. I have only one user on this computer and I am the only admin on it, but this error keeps popping up. Any possible solution, that would help me to fix this error? Hello · Did you do changes on the computer before the show? · What application you are using to view the video? Follow these methods. Method 1: Allow the default administrator on the computer and check. Follow these steps: (a) click Start and type cmd in the start search box. (b) right-click on cmd in the list and click on "run as administrator". (c) type the following command and press ENTER: NET user administrator /active: Yes If it works, then it might be a problem with the damaged user profile. Method 2: Create a new user account and verify. If the problem is resolved in a new user account, and then follow the steps in the article to fix a corrupted user account. Difficulty of a corrupted user profile Reference: user accounts: frequently asked questions execute immediate command error Hello I try to run the following command. He failed with an error. I could not understand how to fix the error. Help, please Immediate EXECUTION 'select ' AR',' HZ_CUST_ACCOUNTS', COUNT (*), SUM (DECODE (org_id, 123, 1.0)), SUM (DECODE (org_id, 191, 1, 171, 1.0)), Sum (decode(org_id,7436,1,0)), SUM (DECODE (org_id, 124, 1.0)), SUM (DECODE (org_id, 189, 217, 1, 1.0)), SUM (DECODE (org_id, 125, 1.0)), SUM (DECODE (org_id, 1297, 1, 1299, 1, 1301, 1, 1303, 1, 1305, 1, 0)); SUM (DECODE (org_id, 187, 1, 214, 1.0)), SUM (DECODE (org_id, 43, 1.0)), SUM (DECODE (org_id, 1307, 1, 1309, 1, 1311, 1, 1313, 1, 1315, 1,)) 1317, 1, 1593, 1, 1595, 1, 0)); SUM (DECODE (org_id, 1800, 1.0)); SUM (DECODE (org_id, 2690, 1.0)); 0 OF ' HZ_CUST_ACCOUNTS Why are you cursor in a loop and insert into this loop? Why do you commit all 100 lines? Why the AUTONOMOUS_TRANSACTION? What of your transactional consistency? And I hope that the EXCEPTIONS WHEN of OTHER NULL runs always commented. You seem to be breaking almost all the rules of good PL/SQL. Take a step back and consider using an INSERT... SELECT IN rather than a loop. Hi, the following command runs okay and is successful, but I get the error/warning below. I know it's gross, but it works well and I would like to clean it with a bit of help if possible. Can someone advise/spot the problem please? Many greetings and thanks in advance Steve Order {foreach ($Name in $newVmList) $taskTab [(nouvelle-VM-nom $Name-modèle $modelVm-ResourcePool $ResourcePool-Datastore (Get-DatastoreCluster-nom $dscluster) - OSCustomizationSpec $customspec - whatif - RunAsync).] ID = $Name } ERROR: Index operation has failed; evaluated to null array index. C:\tmp\newvm02.ps1:35 tank: 10 + $taskTab [< < < < (new-VM-name $Name - model $modelVm - ResourcePool $ResourcePool - Datastore (Get-DatastoreCluster-name] $dscluster) OSCustomizationSpec - $customspec - whatif - RunAsync). ID] = $Name + CategoryInfo: InvalidOperation: (System.Collections.Hashtable:Hashtable)], RuntimeException + FullyQualifiedErrorId: NullArrayIndex I noticed that you still hooks in there, the Add method must only in parentheses. It uses 2 parameters; the key and the value. And get rid of the WhatIf switch, otherwise there will be no code. Like this $taskTab.Add ((nouvelle-VM-nom $Name-modèle $modelVm-ResourcePool $ResourcePool-Datastore (Get-DatastoreCluster-nom $dscluster) - OSCustomizationSpec $customspec - RunAsync).) ID, $Name) Hello Please help me in this matter. Get the same error when I clone every time. I clone a database with rman backup EBS. Restoration finished and when I try to change the name of DB using the NEST am getting an error. After that trying to open the database get error and it successfully opened before executing the command NEST when I open the database with resetlogs. but after running command NEST when I open error below is tried very hard but could not able to find the solution. Please help me in this. Error: ORA-01103: name "TESTDBA" in the control of the database file is not 'UAT '. Kind regards. T.A Hello Please see: Solving the problems of RAC RapidClone for Oracle Applications R12 (Doc ID 1303962.1) Section: Configure the primary Oracle Home HTH! Thank you & Best regards Printing on print command errors Installed the new office and connected my old HP Laserjet 4 L parallel to USB cable. Printer is displayed by default in the Panel and will do a test print to the printer. When you try to print a document, it displays the document by mistake in the control panel. Hi Mike,. Thanks for choosing Windows and thank you for providing an opportunity to help you. According to the description, you have problems with printing. 1. what operating system is installed on the computer? 2. you are trying to print online or offline document? 3. What is the format of this document? 4. What is the exact error message you get when you try to print? Answer the questions to help you best. Good day! An array of strange command error Code of the model (from help document): GetNumCtrlArrayItems(ctrlArray, &count);) My Info to user interface: I would define 2 control, here is my Panel arrays and tables My OK button call return code: int CVICALLBACK (int, int control, int event Panel Ok, Here's the problem: I want to change the text in the text box, as defined by the control array, we should call it GetNumCtrlArrayItems (CTRLARRAY, &count);) and GetCtrlArrayItem (CTRLARRAY, i); but, when I click on ok, funtion GetNumCtrlArrayItems back-4. And, I use CTRLARRAY_2 instead of CTRLARRAY, when I click the ok button, the result is like this Who can explain this to me? Is this a bug of Labwindows/CVI 2013? Thank you very much. As you can read in the help, you do not use the name of constant control in this function; Instead, you must call GetCtrlArrayFromResourceID to obtain the handle to be used in the following functions on this component. The error you receive correctly indicates invalid handle. Original title: network Drops randomly: the TCP/IP NetBIOS Helper service was successfully sent a stop control The given reason was: 0 x 40030011 [OS: network connectivity (planned)] Hello 1 have had any changes made on the computer before the show? If you use try Method 1 of the Wi - Fi connection. Method 1: To disable authentication IEEE 802. 1 X, follow these steps: Method 2: Method 3: Windows wireless and wired network connection problems Method 4: Method 5: (a) click Start and type services.msc in the search box. Steps to set the auto services
Hope this information is useful. Hello My script is Inside (LAN) (172.16.x.x) - DMZ (172.29.1.x) I would like to provide access to internal network to the DMZ. In addition to the ACL configuration, I can do this by using the following two methods. What are the advantage\dis advantage of each method static (inside, dmz) 172.16.0.0 172.16.0.0 255.255.0.0 subnet mask OR access-list ip 172.16.0.0 sheep allow 255.255.0.0 172.29.1.0 255.255.255.0 NAT (inside) 0 access-list sheep What is the difference between these two? Hello Function of static and nat (inside) ACL 0 is the same, that is, traffic from inside the demilitarized zone and the opposite would be allowed. The real difference is, when configuring nat (inside) ACL 0, you are really turn off the nat for this traffic engine altogther. Using the static, you disable the nat on the pix engine, turn PIX translations sort of mistakes, as real sense his translation TI. Note: nat (inside) 0 0 0 is different from nat (inside) ACL 0. With ACL option, you can connect the two sector, with only nat (inside) 0 0 its only from the inside to the dmz, dmz inside No. In a moderated network environment, you won't see much difference in terms of performance. It's just depends on condition, you prefer one over the other. I hope that its clear! Thank you Renault Hi James You must apply 3.5.1 Patch 1 or 2 in order to use the incubator. You can get the patch 2 on https://metalink2.oracle.com/metalink/plsql/f?p=200:10:1457180786540529348: Paul I entered "soft secret enable", and now I'm locked up. A question mark after 'enable secret' says I can enter "line". This is not the case, I had to enter 0 or 5, I'm not. I tried If you used "soft secret enable" then soft is your password. It will be used by default 0 (no encrypted password that follows). There is probably a typo when you typed soft because it should work. If there are still questions of password recovery will be your only option to get into the router. I hope it helps. PK I keep trying to update and all these errors reappear. I can't install Microsoft Security Essentials and any update of Windows. I tried to do system Recoery by pressing F11 after reboot, and it does not work either. I'm guessing that something might Acer laptop, Vista is, she can connect wirelessly with my friend modem but my house, she can't, I use the service of Comcast, they checked the modem is fine, they think that the problem of configuration! I'm not computer too, thank you! Ryan (Shih Ch in accordance with in warranty 2 years I had sent request guaranteed 2 years 30 days back, but I can not any confirmation e-mail and how to check my 2 year warranty for laptop B2375dfw administrator privileges I have a Dell B2375dfw all-in-one mono printer. The printer requires me to connect to do several things on the printer itself. This is a printer at home - I wish I could remove the connection. I created a connection with custom menus and other things Problems of performance due to Firewall on Windows 7 So I did a little one of research related to my problem and I could not find anything that describes directly and that solved my problem, so I decided to make my own question in the hope of a response. To put it simply, my computer works very well evSimilar Questions
"I tried to do this: set http://www.under-score.org.uk/pipermail/underscore/2012-October/111875.html and mail.server.default.send_client_info ' to 'false', but it does not work. (true does not work and false does not work).
Thanks for any help.
Kind regards
Birgit
Installed the ExQuilla add-on for Microsoft Exchange 31.0.1136
https://addons.Mozilla.org/en-us/Thunderbird/addon/exquilla-Exchange-Web-services/
Restart Thunderbird, and then go to the server settings - create a new account - select ExQuilla and re - create your account. You must also re-create your filters.
In addition, when I try to update Windows install, I get the message error "not enough memory is available to process this command."
Make sure to specify the value according to the type of object.
For more information, see using RACADM.
for (i = 0; i
SetCtrlVal (panelHandle, GetCtrlArrayItem(ctrlArray, i), I have 2%);
void * callbackData, int eventData1, int eventData2)
{
int, temp_control, County;
switch (event)
{
case EVENT_COMMIT:
GetNumCtrlArrayItems(CTRLARRAY_2, &count);)
for (i = 0; i
{
temp_control = GetCtrlArrayItem (CTRLARRAY_2, i);
ResetTextBox (panelHandle, temp_control, "test");
}
break;
}
return 0;
}
2. do you have a wired or wireless network connection?
3. do you get an error message? If Yes, what is the full and exact error message?
Disable authentication IEEE 802. 1 X.
This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.
(a) click Start, type ncpa.cpl, and then press enter.
(b) with the right button of your wireless network connection and then click Properties.
(c) click the wireless networks tab.
(d) under preferred networks, click your wireless network, and then click Properties.
(e) click on the tab authentication, click keyar authentication to enable IEEE 802. 1 X for this network check box, and then click OK twice.
Try the procedure described in the link to create a new network profile.
Create or modify network profiles
http://Windows.Microsoft.com/en-us/Windows7/create-or-modify-network-profiles
If the problem persists, you can try the procedure described in the link and check.
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
If the problem persists, you can try to reset the Internet Protocol.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357
If still the issue remains, control whether or not the service is set to automatic.
(b) search of the computer browser.
(c) series the service to automatic.
b. right-click on the service
c. If the service is stopped , then Start the service
d. Select Properties
e. and in the Startup type , select Automatic.
I use a single JAVA virtual machine for the test with the supplied command cache config, localstorage = true, etc. No idea why I get this message?
com.tangosol.util.AssertionException: poll() is a call blocking and cannot be called on the thread of the Service
[java] 2009-10-13 13:40:49.664/7.719 Oracle Coherence GE 3.5.1/461 <D5> (thread=CommandExecutor:Thread-1, member=1): Recovering unexecuted commands for CommandExecutor Identifier{Context for Main Thread}
[java] (Wrapped: Failed request execution for DistributedCacheWithBackingMapListener service on Member(Id=1, Timestamp=2009-10-13 13:40:44.758, Address=192.168.1.100:8089, MachineId=26980, Location=site:us.oracle.com,machine:jbayer-lap
process:4196)) com.tangosol.util.AssertionException: poll() is a blocking call and cannot be called on the Service thread
[java] at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.tagException(Grid.CDB:36)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onInvokeRequest(DistributedCache.CDB:80)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$InvokeRequest.run(DistributedCache.CDB:1)
[java] at com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheKeyRequest.onReceived(DistributedCacheKeyRequest.CDB:12)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:136)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
[java] at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
[java] at java.lang.Thread.run(Thread.java:619)
[java] Caused by: com.tangosol.util.AssertionException: poll() is a blocking call and cannot be called on the Service thread
[java] at com.tangosol.coherence.Component._assertFailed(Component.CDB:12)
[java] at com.tangosol.coherence.Component._assert(Component.CDB:3)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:4)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:11)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(DistributedCache.CDB:30)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(DistributedCache.CDB:1)
[java] at com.tangosol.util.ConverterCollections$ConverterMap.put(ConverterCollections.java:1541)
[java] at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.put(DistributedCache.CDB:1)
[java] at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
[java] at com.oracle.coherence.patterns.command.internal.CommandExecutor.acceptCommandExecutionRequest(CommandExecutor.java:708)
[java] at com.oracle.coherence.patterns.command.internal.SubmitCommandExecutionRequestProcessor.process(SubmitCommandExecutionRequestProcessor.java:99)
Maybe you are looking for