Printing on print command errors

Similar Questions

• printer says: "command error, processing" and will print on "restart", or "will it delete what is on the reel-Help?

  All printed on July 20, 2011, but not July 21, 2011, so I did a restore of the system to 17 July 2011 and she removed only a 'Pause' on the printer, but not this following error message: printer says: "command error, treatment" and will print on "restart", or "will it delete what is on the reel-Help?

  1)

  Start > type services.msc

  Scroll down and click on print spooler

  Click on stop the service

  Click Start the Service

  Close the window

  Go to control panel > open the Printers folder

  Right-click on the printer, and then select open

  The documents are displayed in the queue?  If they are, click on the printer and select Cancel all Documents

  Close the window and restart the system

  2)

  Uninstall the printer software/driver

  Restart the system and install the software/driver

  Update driver software

• Print a Word 2013 file in PDF format, which prints the PDF, but when printing the PDF gereated on a laser printer, an error occurs: Error: invalidfont Offending Command: see battery :)

  I was wondering if anyone had a problem with printing PDF error codes that caused Word to Acrobat Pro Xi 2013. I converted fonts to local installation to common font - Arial, and the same error occurs.

  Help!

  Problem has been resolved the Konica Minolta C552 internal software had to be updated!

• Print Preview error: the selected printer could not be found.

  I get this error when trying to get a glimpse of an email in Thunderbird vs 24.

  Yes, in fact, it works with the Print command in Thunderbird.

  It is in Thunderbird 24.6

• Oxooooo6ba print spooler error

  Just added printer to new computer

  Hello

  Check with the manufacturer of the printer for drivers updated, their support and forums for known
  questions.

  --------------------------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the)
  machine for the most recent driver).

  Check Mr. Fixits here and if you must use other methods to go back and try them
  again thereafter.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  Start-up services - type in the search - box found at the top of the list - made right click on - RUN AS ADMIN

  Check the default settings of spooler print and dependencies and their dependencies
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  Check all the default service settings - reset ALL services back to default values
  http://www.blackviper.com/WinVista/servicecfg.htm

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Print Spoller error

  My printer had disappeared.  When I try to go to the Add Printer Wizard, I get the following error message:

  Operation could not be performed. The print spooler service is not running.
  This error occurs because the spooler service has not been started or has stopped working.

  I tried to manually restart the print under Adminitrative tools spooler: Service: print spooler and I get the following error:
  Error 1068: The despendency service or group could start.

  I tried to run Fix It Microsoft, and he can't come up with a solution.

  Any suggestions?

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the)
  machine for the most recent driver).

  Check Mr. Fixits here and if you must use other methods to go back and try again
  thereafter.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.

  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• 0x800706b9 print spooler error

  I have a 8.1 Microsoft Windows and a HP Desktop 2512.

  My computer no longer recognises my printer. I keep receiveing an error of 0x800706b9 print spooler

  I tried the net start spooler command, but that has failed. What to do next? Help, please!

  Hey @crod57,

  Welcome to the Forums of HP Support!

  I understand that you are no longer able to print from your computer Windows 8.1 for the all-in-one printer HP Deskjet 2512 as your computer reports a 'print spooler error: 0x800706b9'. I would like to help you today with the resolution of this error of print spooler. Now, just so you know, the print spooler is a feature of your operating system. It is integrated with your Windows computer. Essentially, it's the printing system built into your computer. Printers rely on the print spooler works to print. The spooler is not specific to HP. So, I will be able to offer you a few steps of standard troubleshooting on the computer. However, if the problem persists you may need to talk with Microsoft Product Support or your computer manufacturer to solve this problem of operating system. That being said, can I please have you follow the steps below to resolve this issue.

  Step 1: Check print spooler:

  1. Open your screen to Start by clicking the Windows button on the lower left side of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. In the start screen, type run
  3. Click Run to launch the run dialogue box
  4. In the run box, type services.msc and click OK
  5. When the Services window opens scroll down until you see the print spooler
  6. Click Print Spooler once just to highlight
  7. If you Start in the upper left corner that indicates that your print spooler is actually stopped (not good). But we will leave that for now.
  8. If you stop or restart in the upper left corner, this indicates that your print spooler is actually started. Please click on stop to stop the service momentarily.
  9. Reduce this window which will allow us to come back here

  Step 2: Check the spooler folder:

  1. Reopen your splash screen
  2. Computertype. Click on the computer (or on This PC) when it fills so
  3. In the computer window, select your Drive C
  4. Click on Windows
  5. Click on System32
  6. Click on the reel
  7. Click PRINTERS. You can get permissions to a warning, just continue beyond that.
  8. PRINTERS of the folder must be empty. If there is no file here, they are corrupt print jobs. Right click on anything in that folder and 'delete' files.
  9. Close the PRINTERS folder

  Step 3: Start Spooler and audit dependencies:

  1 open the Services window we previously minimized

  2. click on print spooler to highlight

  3. click on Start in the upper left corner

  4. If you get an error message please take note of this

  5. If the print spooler starts successfully you will see "stop and restart" as your options at the top left

  6. then, double left click on print spooler. A print spooler properties window is now open. Click the connection tab at the top. Can you please make sure that it is set to Local System account and make sure that the check box is selected to "Allow the Service to interact with desktop".

  7. then click on the tab "dependencies". Please check which dependencies are listed. I need to know this if the problem persists when you have completed the steps I provide in this post.

  

  8. click on apply and OK for any changes that you have made the log tab. Close the Services window.

  Once the Print Spooler Service has started successfully, you should be able to access your printer HP Deskjet under devices and printers on your computer folder Windows 8.1. Also, you should be able to print. Can I please have you test the impression at this stage to confirm that the print spooler error has been resolved.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• C7280 all-in-One responds to the print command.

  My HP Photosmart C7280 all-in-one has stopped responding to print commands on my home wireless network with a Macbook Pro.  The C7280 will scan and copy just fine.  A print order blocking Microsoft for Mac software or gets an error message on the Print Manager.  Following the instructions of HP I have reset the printer system and repair the disk (no fixed necessary); Then I need to uninstall and reinstall.  How do I do that?  (The C7280 was purchased in 2008).  Other suggestions?  Thank you!

  This widget could not be displayed.

• Cannot print. Error "the port is not connected.

  Original title: SAMSUNG printer problem

  Hello! I just bought a SAMSUNG ML-1860 Monochrome laser printer. I have a machine from Asus with Winsdows 7 Pro installed in it. I plugged in the printer and it automatically detected and installed the USB drivers throguh. I have isntalled the software from the CD and now when I tried to send a print command, I couldn't print. I get this alert error instead. "The port is not connected. "I check. USB 001. I tried everything I could do, re installation. Checking ports... .and everything. When I restart it suddenly prints this document I wanted before but when I try again, I have the same error. Please help me... :(

  Hello

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Check if that helps.

• HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

  I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
  In the first computer (windows 7) I can print without any problem
  On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
  I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
  Thank you for your advice

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• All of a sudden, I can't print any web page. After the print command, she wants to save it to an XPS file.

  All of a sudden, I can't print any web page. After the print command, he wants me to save a file in XPS, and I can't spend.

  This has happened

  Each time Firefox opened

  Is a few weeks ago

  In the print dialog box, change the selected Microsoft XPS Document Writer printer in your printer you want.

• Incompatible print cartridge error C309g.

  Incompatible print cartridge error C309g. When replacing foul 564 XL (black), now I get this message. The new cartridge works in another printer that uses 564 XL. Went ahead and tried another brand new 564 XL - same message. Have turned printer on and outside. Is there a way to reoot, clean or otherwise set the printer before assuming it's really broken? Other suggestions?

  UPDATE: this has been resolved with a hard reset. I found how to do this in another post (thanks bassergitz!). How to do a hard reset or 'dirty power up': when the printer is on, pull on the power cord to the printer and the wall. After 30 seconds reconnect power to the wall and printer. It will take several minutes to initialize.

• Can I give print command to the printer HP color of LabVIEW 7.1. ?

  Hello..

  Can I give print command to the printer HP color of LabVIEW 7.1. ? I asked where I have to calculate some numbers & print them with fixed text... Is it possible to perform the print command of the LabVIEW 7.1 for HP color printer...? Can someone help me please...?

  Thanks for any help on your part...

  You can probably find a solution using report generation screws you can create a report, insert all the data and text you want and print it on the printer by default or on a named printer. The report generation screws are at the bottom of the palette of programming.

• My computer does not accept the print command.

  My computer does not accept the print command.  He always questions me to save a file, I don't want to save a file.  How can I change this?

  Sherimcfalls,

  1. what operating system is installed on the computer?
  2. the problem occurs with any particular application?

  Method 1
  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2
  Try to set the default printer.

  Change your default printer
  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

• XP Printer Spooler error

  Original title : XP Printer Spooler error - tried

  Hello

  It's my client computer, so I'm not always in front of her, most work at home.  It has a desktop with XP and a HP printer.
  I tried the following:

  http://support.Microsoft.com/kb/810894

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  http://forums.techarena.in/Windows-XP-support/1040367.htm

  I also tried to uninstall the printer, what has not worked and went to the HP website and downloaded the latest driver update and the

  the entire facility was updated too.

  I rebooted several times, all cleaned and everything, I'm stumped.  Any who have suggestions or you know why nothing works?

  Any help would be greatly appreciated!

  Thank you!

  Holly

  Actually, no.  What I was referring to came from http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm .

  Usually, this will do a good job of cleaning of the drivers with Windows 2000 and later versions (not the case with Windows NT 4).

  If the print spooler service is not running, or you want to make sure that there are no remains of printer driver, follow the instructions below, or use the cleanspl.exe of Windows 2000, XP, or 2003 Resource Kit (http://www.microsoft.com/downloads/details.aspx?FamilyID=9d467a69-57ff-4ae7-96ee-b18c4790cffd&DisplayLang=en).  cleanspl.exe Windows 2003 Resource Kit tools works on Windows XP.

  Some information about cleanspl.exe:

  • cleanspl.exe did a very thorough job of cleaning the print spooler stuff, but it does not remove the dependence of the spooler service on the Lexmark service (see Special on Lexmark printer drivers information).

  • You can use it to clean the stuff of spooler on another computer (i.e. remote).

  • When you run it, it asks you if you want to remove things that are actually delivered (and installed by default) with Windows.  In most cases, you need No corresponding guests (you won't remove the Port TCP/IP Standard or BJ language monitor).