Static/OSPF Redistribution fails for specific Routes
Hello
I have an ASA which is redistribution of static routes in OSPF with a standard access list and a roadmap (seq 10). For the most part, it works very well, however I have a problem where some networks will not redistribute.
I have a network summary, 172.16.0.0/16 which is redistributed. Another network 172.16.1.0/24 will not redistribute. Other networks like 10.0.0.0/24 will redistribute without any problem.
I tried to add a list of prefixes to the Roadmap (seq 5) as a test, with 172.16.1.0/24 as the only authorized route, but there is no change.
When I look into the ospf on the peer OSPF (Nexus 5 k) database, the synthetic route is present, but the more specific route is not.
I do not use any route filtering and no route-maps / ACL / prefix lists are set to deny.
Is there a reason that the ASA redistribute a more specific route in OSPF?
Thank you
Hello!
Share your config of ASA, its IP routing table and content LSDB please. In general, if you have redistributed summary, the specific routes referred to in this summary are not required to be redistributed and/or announced.
Tags: Cisco Network
Similar Questions
-
Static of recording fails for use with DG broker
Don't know what I'm doing wrong, but I'm not able to get the static record for use with DG broker.
Any ideas appreciated. Thank you Michael.
Oracle@arrow:hawklas:/U01/app/Oracle/product/11.2.0/dbhome_1/network/admin
$ cat listener.ora
LISTENER_LAS =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = tcp)(HOST=arrow) (PORT = 1530)(SEND_BUF_SIZE=32767) (RECV_BUF_SIZE = 32767))
)
)
)
SID_LIST_LISTENER_LAS =
(SID_LIST =
(SID_DESC =
(SDU = 32767)
(GLOBAL_NAME = hawklas_DGMGRL.localdomain)
(SID_NAME = hawklas)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(ENVS=/u01/app/oracle/product/11.2.0/dbhome_1)
)
(SID_DESC =
(SDU = 32767)
(GLOBAL_NAME = foo2)
(SID_NAME = foo2)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
)
)
##########
LISTENER_SAN =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = tcp)(HOST=arrow) (PORT = 1531)(SEND_BUF_SIZE=32767) (RECV_BUF_SIZE = 32767))
)
)
)
SID_LIST_LISTENER_SAN =
(SID_LIST =
(SID_DESC =
(SDU = 32767)
(GLOBAL_NAME = hawksan_DGMGRL)
(SID_NAME = hawksan)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
)
)
INBOUND_CONNECT_TIMEOUT_LISTENER_LAS = 120
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER_LAS = OFF
DIAG_ADR_ENABLED_LISTENER_LAS = OFF
LOGGING_LISTENER_LAS = WE
TRACE_LEVEL_LISTENER_LAS = OFF
SAVE_CONFIG_ON_STOP_LISTENER_LAS = TRUE
ADMIN_RESTRICTIONS_LISTENER_LAS = WE
INBOUND_CONNECT_TIMEOUT_LISTENER_SAN = 120
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER_SAN = OFF
DIAG_ADR_ENABLED_LISTENER_SAN = OFF
LOGGING_LISTENER_SAN = WE
TRACE_LEVEL_LISTENER_SAN = OFF
SAVE_CONFIG_ON_STOP_LISTENER_SAN = TRUE
Oracle@arrow:hawklas:/U01/app/Oracle/product/11.2.0/dbhome_1/network/admin
$ lsnrctl start listener_las
LSNRCTL for Linux: Version 11.2.0.4.0 - Production on January 15, 2016 16:29:16
Copyright (c) 1991, 2013, Oracle. All rights reserved.
From /u01/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 11.2.0.4.0 - Production
System settings file is /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/11.2.0/dbhome_1/network/log/listener_las.log
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1530))(HOST=arrow.localdomain)))
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=arrow) (PORT = 1530)(SEND_BUF_SIZE=32767) (RECV_BUF_SIZE = 32767)))
STATUS of the LISTENER
------------------------
Alias listener_las
Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production
Start date January 15, 2016 16:29:16
Uptime 0 days 0 h 0 min 0 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/product/11.2.0/dbhome_1/network/log/listener_las.log
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1530))(HOST=arrow.localdomain)))
Summary of services...
Service 'foo2' has 1 instance (s).
Instance 'foo2', status UNKNOWN, has 1 operation for this service...
Service 'hawklas' has 1 instance (s).
Instance of 'hawklas', status UNKNOWN, has 1 operation for this service...
The command completed successfully
Oracle@arrow:hawklas:/U01/app/Oracle/product/11.2.0/dbhome_1/network/admin
$ lsnrctl start listener_san
LSNRCTL for Linux: Version 11.2.0.4.0 - Production on January 15, 2016 16:29:18
Copyright (c) 1991, 2013, Oracle. All rights reserved.
From /u01/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: Please wait...
TNSLSNR for Linux: Version 11.2.0.4.0 - Production
System settings file is /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/11.2.0/dbhome_1/network/log/listener_san.log
Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=arrow.localdomain)))
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=arrow) (PORT = 1531)(SEND_BUF_SIZE=32767) (RECV_BUF_SIZE = 32767)))
STATUS of the LISTENER
------------------------
Alias listener_san
Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production
Start date January 15, 2016 16:29:18
Uptime 0 days 0 h 0 min 0 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/product/11.2.0/dbhome_1/network/log/listener_san.log
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1531))(HOST=arrow.localdomain)))
Summary of services...
Service 'hawksan' has 1 instance (s).
Instance of 'hawksan', status UNKNOWN, has 1 operation for this service...
The command completed successfully
Oracle@arrow:hawklas:/U01/app/Oracle/product/11.2.0/dbhome_1/network/admin
$
SID_LIST_LISTENER_SAN =
(SID_LIST =
(SID_DESC =
(SDU = 32767)
(GLOBAL_NAME = hawksan_DGMGRL)
(SID_NAME = hawksan)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
)
)
Please change GLOBAL_NAME to GLOBAL_DBNAME and then reload the listener. It should be like GLOBAL_DBNAME and GLOBAL_NAME not.
GLOBAL_DBNAME identifies the database service. Rename has nothing to do in the listener.ora file.
GLOBAL_DBNAME = hawksan_DGMGRL
-Jonathan Rolland
-
Recompose unique feedback fails for specific pool
Hi '.
I cannot reconstruct machines in a specifik pool. The works of this composer for the pool, if I delete not attributed vm, new ones are created.
I'm looking for in C:\ProgramData\VMware\View Composer\Logs, but no error is detected.
Pointers in what look?
http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2001021 <-this isn't the error.
Thanks in advance
I find that when something goes wrong with a Redial (mistake or not) its usually because of something be messed up in the ADAM and composer DBs
I use ADSI edit and check the virtual machine against what you see in Admin mode and clean the DB.
Use this link if you have not already and let us know if this helps--> http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1008658
-
Setting up IP static to some Ports on the router.
On a v4.3 can BEFSR41 I configure static IP for specific to the rear ports. For example, Port 1 (at the back of the router) = 192.168.100.20, Port 2 = 192.168.100.21, etc.. I don't want to set static IP on the PC connect, but I want to know that the PC at channel 1 is 192.168.100.20. Computers can be changed often then it may be easier to force an IP address to the computer to the router and leave the set PC to DHCP. I hope someone understands what I'm asking. Thank you.
On your router, you cannot assign a static/fixed IP for a specific port, static ip must be assigned on your PC...
-
For this preface, I use the server in a lab environment and trying to set up my own VPN L2TP/IPSec. I opened the UDP 500 and 1701 TCP ports on my router for the interface of the primary server where is the VPN. It is on a Comcast connection consumer where other applications such as Arma 3 servers dedicated and IIS have worked.
The RRAS role to run based on this tutorial: http://www.thomasmaurer.ch/2014/01/how-to-install-vpn-on-windows-server-2012-r2/ I have only strayed from it using DHCP forwarding instead of a static pool of IP as my router is running a DHCP server, and if I understand correctly, the router must give IP addresses of the internal IP pool which I use for everything else. I also use the PSK authentication rather than be based certificate. For the authentication of users I have MS-CHAP-V2 and CHAP enabled; I connect from the remote device with an account on that I created on the server for the purpose of this VPN I know RRAS connections are allowed.When the connection I get error 789: L2TP connection attempt failed because the security layer detected a processing error during initial negotiations with the remote computer. From what I've seen, this can be fixed by checking that the two ends of the connection are not behind a NAT (not an option), verification of the PSK (already done) and certificates (not applicable). If there is a way to solve this problem that would be great, but my server will always be behind a NAT firewall because the router is one, and the modem becomes one if several devices are connected to him without a router between the two.
This issue is beyond the scope of this site and must be placed on Technet or MSDN -
Always load balancing algorithms "static mapping vSwitch port for Teddy adapter?
I'm looking for a LBT for my move to 10 G ethernet and see this KB
It is said
"""
In vSphere 4.0, there are three strategies:
- Route based on the originating Virtual Port ID
- Function hash IP route
- Route in function interference source to the MAC
These three policies provide a static mapping of vSwitch for Teddy adapter port.
"""
I always thought that IP hash would allow a virtual machine to use more than one bear, so she sent to several IP addresses, am I wrong or the Ko?
Tom
Maybe it is not described as clearly as it could be. However, the traffic of a VM (IP address) to a specific target (IP address) is always sent over the same bear. That's what the article described as static.
Since you are looking to balance the load. Have you already taken a glance to vSphere 4.1. It offers "focused on the burden of reunification." Maybe you want to read http://blogs.vmware.com/performance/2010/12/vmware-load-based-teaming-lbt-performance-.html for details and performance.
André
-
How can I find out the password for my router, I missed place
I want to add another computer to use though, I can't find the password for my router. Is it possible to find it on one of my other computers.
Except if you have really tightened down on the security of your router, adding another computer should be a simple to plug it. In any case, most routers can be reset by default (including the password) by pressing the button of reset for about 10 seconds. As you do not have the brand or the model of router in your post, all I can recommend is for more specific information, you should go to your router manufacturer's website and download the manual for your make and model of router and follow the instructions.
HTH,
JW -
END point URL for the routing service BSE says not FOUND
Hi all
For services of routing in BSE, the WSDL link opens the fine, but the link to endpoint URI for the routing service fails with the message below the message. When I invoke the WSDL with SOAP UI, I'll be back the same error message. I tried to bounce the server, but no help. I also noticed that this slide ESB_Projects Directory gives error 404 on any browser.
Then, when I click below url for all the routing service
http:// < hostname >: < port > /Event/ < systemName > / < serviceGroupName > /AddressStandardizeRS
I get the error in the browser - below
Not found
The URL /event/ requested < the system name > / < group name > / < Routing Service name > was not found on this server.
-
Catalog object privilege validation failed for the user.
Hello
I'm getting following error after adding HTML tags in 11g dashboard.
How to set privileges?... Kindly let me know. Thank you.
The error massage:
Catalog object privilege validation failed for path/users/User1/_portal/page 1 user.
Currently you do not have sufficient privileges to save a report page or dashboard that contains the HTML markup. Dashboard contains HTML tags customized for static text.Hi user,
Go to settings-> directors-> Manage privileges-> "answers".
Here you can see - 'Save content with HTML markup' next to it, you will see "presentation server administrators.
Click on it and change it to "Everyone."And save the changes. Restart the BI Services now, you can add the content and it will not error messages appear.
Thank you.
Reward points and close the response unit to help others with the same question :)
-
Atuhentication failed for release forms
Hello
I m using OS RHEL 4 and Oracle apps 12.0.6
I m running a report, a printed order form order
When executing this report I get these errors
Your help is appreciated
Kind regards
Milan ROUGIER
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Check out FNDCPOPP competitor Manager: December 13, 2010 19:49:13
Check out FNDCPOPP competitor Manager: December 13, 2010 19:49:15
Check out FNDCPOPP competitor Manager: December 13, 2010 19:49:16
Check out FNDCPOPP competitor Manager: December 13, 2010 19:49:17
Check out FNDCPOPP competitor Manager: December 13, 2010 19:49:18
End of session monitor process: December 13, 2010 19:49:26
Deal monitor session started: December 13, 2010 19:50:56
CONC-SM TNS FAIL
Call to PingProcess failed for DebugSvc
CONC-SM TNS FAIL
Call to StopProcess failed for DebugSvc
CONC-SM TNS FAIL
Call to PingProcess failed for FNDOPP
CONC-SM TNS FAIL
Call to StopProcess failed for FNDOPP
CONC-SM TNS FAIL
Call to PingProcess failed for FNDOPP
CONC-SM TNS FAIL
Call to StopProcess failed for FNDOPP
CONC-SM TNS FAIL
Call to PingProcess failed for FNDOPP
-------------------------------------------------
[12/13/10 19:49:36] [main] From service GSF with simultaneous process id is 969228.
[12/13/10 19:49:36] [main] Initialization parameters:
oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads = 5
[12/13/10 19:49:36] [Thread-26] Wire service commissioning.
[12/13/10 19:49:36] [Thread-27] Wire service commissioning.
[13/12/10 20:00:37] [OPPServiceThread1] Post-processing application 988423.
[13/12/10 20:00:38] [969228:RT988423] The execution of the actions of post-processing for request 988423.
[13/12/10 20:00:40] [969228:RT988423] From XML Publisher postprocessing action.
[13/12/10 20:00:40] [969228:RT988423]
Model code: IDFCPO
Model app: IN.
Language: en
Territory: U.S.
Output type: PDF
[121310_080043223] [] [EXCEPTION] [DEBUG] - set preferences PreferenceStore-
[121310_080043223] [] [EXCEPTION] [DEBUG] - environment variables stored in EnvironmentStore-
[121310_080043223] [[EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.] LOW]:-[1]
[121310_080043223] [] [EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]: [0]
[121310_080043224] [] [EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]: [300]
[121310_080043224] [] [EXCEPTION] [DEBUG] [NLS_CHARACTERSET]: [US7ASCII]
[121310_080043224] [] [EXCEPTION] [DEBUG] [RESP_APPL_ID]:-[1]
[121310_080043224] [] [EXCEPTION] [DEBUG] [NLS_LANGUAGE]: [AMERICAN]
[121310_080043224] [] [EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]: [1]
[121310_080043224] [] [EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]: [2]
[121310_080043225] [] [EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]: [.,]
[121310_080043225] [] [EXCEPTION] [DEBUG]
[APPS_JDBC_URL]: [jdbc:oracle:thin: @(DESCRIPTION = (ADDRESS_LIST = (LOAD_BALANCE = YES) (FAILOVER = YES) (ADDRESS = ()]
Protocol = TCP)(Host=appstest.) [((IDFC.com)(port=1606))) (CONNECT_DATA = (SID = dev1)))]
[121310_080043225] [] [EXCEPTION] [DEBUG] [RESP_ID]:-[1]
[121310_080043225] [] [EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]: [500]
[121310_080043225] [] [EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]: [false]
[121310_080043226] [] [EXCEPTION] [DEBUG] [USER_ID]:-[1]
[121310_080043226] [] [EXCEPTION] [DEBUG] [NLS_TERRITORY]: [AMERICA]
[121310_080043226] [] [EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]: [false]
[121310_080043226] [] [EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]: [true]
[121310_080043226] [] [EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]: [DD-MON-RR]
[121310_080043226] [] [EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]: [5]
[121310_080043227] [[EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.] HIGH]:-[1]
[121310_080043227] [] [EXCEPTION] [DEBUG] [NLS_SORT]: [BINARY]
[121310_080043227] [] [EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]: [AMERICAN]
[121310_080043227] [] [EXCEPTION] [DEBUG] [LOGIN_ID]:-[1]
[121310_080043227] [] [EXCEPTION] [DEBUG] - properties stored in the Java System Properties-
[121310_080043227] [] [EXCEPTION] [DEBUG] [APPLTMP]: [u01/DEV1/inst/apps/DEV1_appstest/appltmp]
[121310_080043227] [] [EXCEPTION] [DEBUG] [java.runtime.name]: [Java (TM) 2 Runtime Environment, Standard
Edition]
[121310_080043227] [] [EXCEPTION] [DEBUG]
[sun.boot.library.path]:[u01/DEV1/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386]
[121310_080043228] [] [EXCEPTION] [DEBUG] [java.vm.version]: [1.5.0_08 - b03]
[121310_080043228] [] [EXCEPTION] [DEBUG] [OVERRIDE_DBC]: [true]
[121310_080043228] [] [EXCEPTION] [DEBUG]
[dbcfile]:[u01/DEV1/inst/apps/DEV1_appstest/appl/fnd/12.0.0/secure/DEV1.dbc]
[121310_080043228] [] [EXCEPTION] [DEBUG] [java.vm.vendor]: [Sun Microsystems Inc..]
[121310_080043228] [] [EXCEPTION] [DEBUG] [java.vendor.url]: [http://java.sun.com/]
[121310_080043228] [[EXCEPTION] [DEBUG] [path.separator]]: [[:]
[121310_080043228] [] [EXCEPTION] [DEBUG] [APPLCSF]: [u01/DEV1/inst/apps/DEV1_appstest/papers/appl/conc]
[121310_080043228] [] [EXCEPTION] [DEBUG] [java.vm.name]: [the server VM Java]
[121310_080043229] [] [EXCEPTION] [DEBUG] [file.encoding.pkg]: [sun.io]
[121310_080043229] [] [EXCEPTION] [DEBUG] [user.country]: [US]
[121310_080043229] [] [EXCEPTION] [DEBUG] [sun.os.patch.level]: [unknown]
[121310_080043229] [] [EXCEPTION] [DEBUG] [java.vm.specification.name]: [Java Virtual Machine
Specifications]
[121310_080043229] [] [EXCEPTION] [DEBUG]
[user.dir]:[u01/DEV1/inst/apps/DEV1_appstest/logs/appl/conc/log]
[121310_080043229] [] [EXCEPTION] [DEBUG] [java.runtime.version]: [1.5.0_08 - b03]
[121310_080043229] [] [EXCEPTION] [DEBUG] [CLIENT_PROCESSID]: [14359]
[121310_080043229] [] [EXCEPTION] [DEBUG] [java.awt.graphicsenv]: [sun.awt.X11GraphicsEnvironment]
[121310_080043229] [] [EXCEPTION] [DEBUG]
[java.endorsed.dirs]:[u01/DEV1/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/endorsed]
[121310_080043230] [] [EXCEPTION] [DEBUG] [os.arch]: [i386]
[121310_080043230] [] [EXCEPTION] [DEBUG]
[JTFDBCFILE]:[u01/DEV1/inst/apps/DEV1_appstest/appl/fnd/12.0.0/secure/DEV1.dbc]
[121310_080043230] [] [EXCEPTION] [DEBUG] [java.io.tmpdir]: [tmp]
[121310_080043230] [] [EXCEPTION] [DEBUG] [line.separator]:]
]
[121310_080043230] [] [EXCEPTION] [DEBUG] [java.vm.specification.vendor]: [Sun Microsystems Inc..]
[121310_080043230] [] [EXCEPTION] [DEBUG] [os.name]: [Linux]
[121310_080043230] [] [EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]: [1]
[121310_080043231] [] [EXCEPTION] [DEBUG] [CPID]: [969228]
[121310_080043231] [] [EXCEPTION] [DEBUG] [sun.jnu.encoding]: [UTF-8]
[121310_080043231] [] [EXCEPTION] [DEBUG] [oracle.apps.fnd.common.Pool.leak.mode]: [stderr: off]
[121310_080043231] [] [EXCEPTION] [DEBUG]
[java.library.path]:[/u01/DEV1/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386/server:/u01/DEV1/apps/tech_
St/10.1.3/appsutil/JDK/JRE/lib/i386:/U01/dev1/apps/tech_st/10.1.3/appsutil/JDK/JRE/... / lib/i386: / u01/DEV1
/Apps/tech_st/10.1.3/lib32:/U01/dev1/apps/tech_st/10.1.3/lib:/U01/dev1/apps/apps_st/appl/CZ/12.0.0/bin:/
U01/dev1/apps/apps_st/appl/IBY/12.0.0/bin:/U01/dev1/apps/apps_st/appl/PON/12.0.0/bin:/U01/dev1/apps/apps
_st/appl/SHT/12.0.0/lib]
[121310_080043231] [] [EXCEPTION] [DEBUG] [java.specification.name]: [Java platform API specification]
[121310_080043231] [] [EXCEPTION] [DEBUG] [java.class.version]: [49.0]
[121310_080043231] [] [EXCEPTION] [DEBUG] [sun.management.compiler]: [HotSpot Server compiler]
[121310_080043231] [] [EXCEPTION] [DEBUG] [queue_appl_id]: [0]
[121310_080043231] [] [EXCEPTION] [DEBUG] [os.version]: [2.6.9 - 22.ELsmp]
[121310_080043232] [] [EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]: [true]
[121310_080043232] [] [EXCEPTION] [DEBUG] [user.home]: [home/applnew]
[121310_080043232] [] [EXCEPTION] [DEBUG] [user.timezone]: [Asia/Calcutta]
[121310_080043232] [] [EXCEPTION] [DEBUG] [java.awt.printerjob]: [sun.print.PSPrinterJob]
[121310_080043232] [] [EXCEPTION] [DEBUG] [file.encoding]: [UTF-8]
[121310_080043232] [] [EXCEPTION] [DEBUG] [java.specification.version]: [1.5]
[121310_080043232] [] [EXCEPTION] [DEBUG] [CACHEMODE]: [PUBLISHED]
[121310_080043232] [] [EXCEPTION] [DEBUG] [conc_queue_id]: [1093]
[121310_080043233] [] [EXCEPTION] [DEBUG]
[java.class.path]:[/u01/DEV1/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/DEV1/apps/tech_st/10.1.3/a
ppsutil/JDK/lib/Tools.jar:/u01/dev1/Apps/tech_st/10.1.3/appsutil/jdk/jre/lib/RT.jar:/u01/dev1/Apps/apps_
St/COMN/Java/lib/appsborg2.zip:/u01/dev1/Apps/apps_st/COMN/java/classes]
[121310_080043233] [] [EXCEPTION] [DEBUG] [user.name]: [applnew]
[121310_080043233] [] [EXCEPTION] [DEBUG]
[DBCFILE]:[u01/DEV1/inst/apps/DEV1_appstest/appl/fnd/12.0.0/secure/DEV1.dbc]
[121310_080043233] [] [EXCEPTION] [DEBUG] [java.vm.specification.version]: [1.0]
[121310_080043233] [EXCEPTION] [DEBUG] [java.home]:[u01/DEV1/apps/tech_st/10.1.3/appsutil/jdk/jre]]
[121310_080043233] [] [EXCEPTION] [DEBUG] [sun.arch.data.model]: [32]
[121310_080043233] [] [EXCEPTION] [DEBUG] [user.language]: [in]
[121310_080043233] [] [EXCEPTION] [DEBUG] [java.specification.vendor]: [Sun Microsystems Inc..]
[121310_080043233] [] [EXCEPTION] [DEBUG] [mode java.vm.info]: [mixed]
[121310_080043234] [] [EXCEPTION] [DEBUG]
[logfile]:[u01/DEV1/inst/apps/DEV1_appstest/logs/appl/conc/log/FNDOPP969228.txt]
[121310_080043234] [] [EXCEPTION] [DEBUG] [java.version]: [1.5.0_08]
[121310_080043234] [] [EXCEPTION] [DEBUG]
[java.ext.dirs]:[u01/DEV1/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/ext]
[121310_080043234] [] [EXCEPTION] [DEBUG]
[sun.boot.class.path]:[/u01/DEV1/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/DEV1/apps/tech_st/
10.1.3/appsutil/JDK/JRE/lib/i18n.jar:/U01/dev1/apps/tech_st/10.1.3/appsutil/JDK/JRE/lib/sunrsasign.jar:/
U01/dev1/apps/tech_st/10.1.3/appsutil/JDK/JRE/lib/JSSE.jar:/U01/dev1/apps/tech_st/10.1.3/appsutil/JDK/Jr
e/lib/JcE.jar:/u01/dev1/Apps/tech_st/10.1.3/appsutil/jdk/jre/lib/charsets.jar:/u01/dev1/Apps/tech_st/10.
1.3/appsutil/JDK/JRE/classes]
[121310_080043234] [] [EXCEPTION] [DEBUG] [java.vendor]: [Sun Microsystems Inc..]
[121310_080043235] [] [EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]: [2]
[121310_080043235] [] [EXCEPTION] [DEBUG] [file.separator]:]
[121310_080043235] [] [EXCEPTION] [DEBUG]
[java.vendor.url.bug]: [http://java.sun.com/cgi-bin/bugreport.cgi]
[121310_080043235] [] [EXCEPTION] [DEBUG] [sun.io.unicode.encoding]: [UnicodeLittle]
[121310_080043235] [] [EXCEPTION] [DEBUG] [sun.cpu.endian]: [little]
[121310_080043236] [] [EXCEPTION] [DEBUG] [APPLOUT]: [out]
[121310_080043236] [] [EXCEPTION] [DEBUG] [sun.cpu.isalist]:]
[13/12/10 20:00:55] [969228:RT988423] Action of post-processing full XML editor.
[13/12/10 20:00:56] [969228:RT988423] Over the actions of post-processing to request 988423.
38 K - > 5687 K (12956 K), dry 0,0046870]
[GC 9271 K - > 5923K (12956K), 0.0064810 begin_of_the_skype_highlighting 0064810]
dry end_of_the_skype_highlighting]
[GC 9507K - > 7319K (12956K), dry 0,0078960]
[GC 10903K - > 7586K (12956K), dry 0,0070510]
[GC 11170K - > 7619K (12956K), dry 0,0036620]
[GC 11203K - > 7721K (12956K), dry 0,0080670]
[GC 11305K - > 7835K (12956K), dry 0,0026180]
[GC 11419K - > 7948K (12956K), dry 0,0022310]
[GC 11532K - > 8057K (12956K), dry 0,0030240]
[GC 11641K - > 8174K (12956K), dry 0,0029540]
[GC 11758K - > 8289K (12956K), dry 0,0029810]
[GC 11873K - > 8401K (12956K), dry 0,0030810]
[GC 11985K - > 8516K (12956K), dry 0,0031500]
[GC 12100K - > 8628K (12956K), dry 0,0029830]
[GC 12212K - > 8739K (12956K), dry 0,0031940]
[GC 12323K - > 8850K (12956K), dry 0,0030670]
[GC 12434K - > 8965K (12956K), dry 0,0032830]
[GC 12549K - > 9076K (12956K), dry 0,0031980]
[GC 12660K - > 9202K (13084K), dry 0,0045150]
[Full GC 9202K - > 5686K (13084K), dry 0,3704950]Salvation;
Check the following note:
Message CONC - SM TNS FAIL appears in the [ID 358223.1] log file managerRespect of
HELIOS -
Is it possible, in messages, the rotation of notifications for specific people or groups of discussion, without disabling notifications for all incoming messages? I sometimes have a lot of messages from my daughter and my phone buzzes away all the time which can be annoying. I don't want to disable notifications entirely or do it on the silence on the other I miss important messages form other people.
You can enable do not disturb on an individual message, but which will shut down the entire conversation if it's a group. This is not the same as activation do not disturb for the phone, which disables all notifications. Open messages, select the message in question, in the upper right, click details and then scroll to the bottom, you should find the switch to do not disturb.
-
I just got a laptop HP ProBook G3 450 with Windows 7 Pro 64 bit. I'm unable to install the Photosmart C410 series software and it fails when checking the system requirements, saying the USB hardware and necessary drivers are not present. I tried with and without a USB cable installed and also tried to disable the security firewall. It fails for the same when USB problem only connected via WiFi. The discoveries of software troubleshooting HP Print and Scan doctor that the software is not fully installed, for example, without help. I can connect to the printer and print a test page using my WiFi network using a web browser, and I managed to install it on two other portable Win7 in the past.
Hello
Click the Start button and type folder in the search bar, then open the Temp folder indicated.
Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
Open the installation folder.
Find the file usbready.exe and rename it to usbready.old.exe
Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
Now follow the installation and check for the difference.
Kind regards
Shlomi -
How to recover or find the network key for a router wireless (Netgear)
Network wireless adapter NIC Ethernet network deviceHow to recover or find the network key for a router wireless (Netgear)
Hi RaymondKramp,
· What version of Windows is installed on your computer?
If you have lost the key to network and not connected to the network, then you can reset the router to factory settings wireless.
If you lost the key network and connected to the network, and then log on to the Web page of the router and get the key.
For more assistance, you can contact Netgear Support:
http://support.NETGEAR.com/app/home
Hope this information helps.
-
Online and automated phone activation fails for XP Home
Activation fails for me for Windows XP Home Edition, after changing a lot of material. Online activation failed. I called the automatic activation phone number where I give them a "ID of Activation" appears on my screen and I like that it is not valid. Microsoft support site sends me to a web page that sends me to a web page that sends me to the first web page.
How do I get this active?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.
(6) explain your question clearly to the support person.
-
Windows Update fails for XP and Office 2003 security updates others are OK. Error message is 0x800F0102.
Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.
Clean boot your PC, and then run Windows Update.
Reset the Windows Update components
Perform operations of KB883825
Maybe you are looking for
-
Satellite Pro 4600 W2k for WinXP - broken graphics update
When you use Win 2000, graphics for Everquest (game online program worked well). After the upgrade to Win XP, the graphics are broken (the pixels don't match). Can not enter the game. We have Trident Cyberblade Graphics Card. How can I make my graphi
-
HOW CONFIGURATED MI SERVIDOR PARA ARRASTRAR ARCHIVOS UN ORDENADOR PC PC
HOW CONFIGURATED MI SERVIDOR PARA ARRASTRAR ARCHIVOS UN ORDENADOR PC PC
-
However, chkdsk finds no problems, so what happens? Checking file system on D:The type of the file system is NTFS.Volume label is A RAID. One of your disks needs to be checked for consistency. Youmay cancel the disk check, but it is strongly recommen
-
BlackBerry Z30 cannot install android apps
I get this message when I try to install any application.
-
Your application BlackBerry PlayBook is BlackBerry 10 ready!
Hey guys,. I just got an e-mail from you "your BlackBerry PlayBook 10 BlackBerry app ready!" I was so happy to hear that my PlayBook apps are ready BB10. I already posted almost 20 apps for BB10! The post includes a code to ask me my reward points. B