Atuhentication failed for release forms

Similar Questions

• put db failed for "cannot allocate memory".

  Hi exports BDB.

  
  

  I met a problem that put the db failed for "cannot allocate memory". From cmd shell "ps", consumption of memory app was not high, it seemed that just BDB can not allocate memory. Here are my questions:

  (1) if use get db or slider with DBT indicator 0, where BDB will allocate memory? (DB cache?)

  (2) I put in cache 16 MB by db_env-> set_cachesize, there are about 10 databases in the environment, it means all the cache 16 MB part 10 db or each has 16 MB cache?

  (3) if there is no memory leak in the app, what would be the possible reasons for "cannot allocate memory"? How I debug this?

  (4) a database in the application has about 100 k records each about 500 bytes data, this database must be walked several times by the cursor. If use DBT indicator 0, will free the memory allocated by the cursor immediately after the cursor close? How much memory would be allocated during the crossing of the database?

  (5) cache is multi-threaded safe? If one thread changes the memory allocated by the BDB using cusror get with DBT indicator 0, other threads bed dirty data possibly?

  BRS,

  Min

  Hi Min,

  The error "Cannot allocate memory" can be caused by using a lot of resources, whereas you allocate spaces for them in advance, resources include locks, mutexes, etc.

  (1) the memory will be allocated heap if you have not defined a function alloc.

  (2) all databases in an environment share the same cache (16 m here).

  (3) as mentioned, the error can be switch to the allocation of lock, mutex, and other resources. You need get the exact location where the error occurs.

  (4) I think that you asked the question on the DBT indicator 0. The memory will be allocated from the default heap and be linked to the cursor. It's transitional, which means that it can be overwritten by the next HBD-> get and released until the cursor closes. More information can be found here:

  https://forums.Oracle.com/thread/2560134

  The simple description of the program, the error seems to be caused by not enough definition of locks and lock objects. Page latch is usually used by Berkeley DB, and if you enable the locking subsystem, by default each page will be locked until the cursor closes. If your database has a lot of pages, then several locks and lock objects are needed, so set the number before opening environment, since the number (1000) default may not be sufficient in this case.

  To avoid setting so many locks and locking of objects, you can try the DB-> set_lk_exclusive, because it hangs on the database instead of pages.

  Another way is to restructure your program to divide operations both in number of sliders/transactions and begin the next curor/transaction after previous finishes. And if you use only the sliders to make so many read operations, you can also evaluate a level of isolation as DB_READ_COMMITTED instead of the default level, and it can avoid divide.

  This thread can help you on this:

  https://forums.Oracle.com/thread/2557981

  5 data from HBDS-> get flagged 0 failed with the cache. Cache is thread-safe to provide write atomicity. If you care about the consistency of your program in environment multi-threads, you must turn on locking and transaction subsystems.

  Kind regards

  Winter, Oracle Berkeley DB

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Upper limit for MaxCells forms of data

  Hi all.
  
  I wonder, if there is an upper limit for MaxCells forms of data. If I decide for you as being equal to 25000 or more, a form fails and returns this error:
  
  Error number:-2147467259
  Error description: unspecified error
  Source: msxml6.dll
  Page with error:/hfm/data/webformgenerated.asp
  
  Thanks in advance for the answers.

  Take a look in the guide of the administrator under the management of metadata--> setting the parameters of the Application.

  There, it says that you must enter-1 to an unlimited size. This is for version 11.1.2.3 Administrator's guide, so maybe check with your current version as well.

  Good luck

  Lukas

• AddNode cmd failed for the secondary node: internal error of AAM - agent could not start. : unknown error HA

  I'm testing paths to upgrade to vSphere ESX 3.5 update 4 on an IBM BladeCenter with 2 hs21 xm Server blades; I am going through several problems, and the last is the one mentioned in the subject of this thread.

  In this scenario, I've upgraded successfully vCenter then I took all the virtual machines on a single host esx 3.5, I removed the other host in the cluster, and then vcenter, then I did a new install of vSphere, I reconnected it the host to the cluster then I did all the procedure with the second node. In the end, I have two installed vSphere hosts but I had to disable my cluster HA always been, I get this error when I try to configure HA agents on the hosts, but I must say that the DRS ok works.

  In the release notes for vSphere, in the section known issues, I can read:

  "Upgrade of an ESX/ESXi 3.x host an ESX/ESXi 4.0 host results in a successful upgrade, but VMware HA reconfiguration may fail.

  When using vCenter Update Manager 4.0 to upgrade an ESX/ESXi 3.x ESX/ESXi 4.0 host, if the host part of an AP or DRS cluster, the update succeeds and the host is reconnected to vCenter Server, but HA reconfiguration may fail. The following error message in the summary of the host tab: HA agent has an error: cmd addnode failed for the main node: internal error of AAM - agent could not be started. : HA unknown error.

  Solution: manually reconfigure HA by right-clicking on the host and select Reconfigure for VMware HA. »

  The problem is that of workaround does not work for me, so I was wondering if someone, is once again able to help me with this problem.

  Thanks in advance for your support.

  Hi Caddo,

  I had the same problem with one of my hosts.  It was resolved after disabling HA on the cluster and enabling again.

  Mirko

• Patch 2 for release 1 MRS.?  Where is he?

  We received the following VMware e-mail:

  http://now.Eloqua.com/e/es.aspx?s=524 & e = EED63317D3724581B89E5B3AB969550A & ELQ = recipientid

  This message indicates that the Patch 2 for 1 update was released in February 2009:

  In February, we released the Patch 2 for 1 update. (Patch 1, published in January, was absorbed in Patch 2). Patch 2 addresses the following questions:

  • Mapping of the inventory screen hangs when SRM protects more than a handful of guests

  • Test and recovery fail for some virtual machines when retrieving multiple ESX clusters, where clusters to access different sets of data warehouses.

  But I'm not able to find this download on the VMware site, nor do I see that it mentioned in this forum. Any suggestions?

  Matthew Evans

  Kraft & Kennedy, Inc.

  360 Lexington Ave.

  New York, NY 10017

  Direct: 212.692.5608

  E-mail: [email protected]

  Hi Matthew,

  you need to connect to the download area SRM even you used initially to download SRM itself and also any SRA I suspect this confuses people because when they sail on page before you download SRM before you click download it seems to me that if you press the download button you download SRM and not patches of SRM. The truth is when you navigate to the download page, you will see a large download table where we have links to not only code SRM, but also fixes the SRA and all MRS. have attached a screenshot that shows you where the patch is.

  hope this helps

  Lee Dilworth

• Is the data stored for the forms also encrypted the passwords?

  I know that the passwords for different Web sites are stored locally in an encrypted file. I would like to know if this is also the case for the form data. Is data stored locally for the forms also encrypted the passwords?

  No, the form data is not encrypted if you save form data in Firefox

  See:

  • AutoFill Forms: https://addons.mozilla.org/firefox/addon/autofill-forms/

• I don't have any contact info for the former owner, what can I do?

  I don't have any contact info for the former owner, what can I do?

  If the iPhone requires an Apple ID and password from the previous owner to unlock: then nothing. Return it to where you bought it and demand a refund. The iPhone doesn't help you.

  Otherwise, you will need to explain why you need the previous owner.

• I want to update to iOS for iPhone form a computer that isn't mine. I do nit want to backup purchases in their itunes library. What should I do?

  I want to update to iOS for iPhone form a computer that isn't mine. I do nit want to backup purchases in their itunes library. What should I do?

  Perhaps you should consider updating Over The Air. Settings > general > software update.

• Photosmart Premium C410: C410 Software Installation fails for not having not supported USB, Win7 Pro

  I just got a laptop HP ProBook G3 450 with Windows 7 Pro 64 bit. I'm unable to install the Photosmart C410 series software and it fails when checking the system requirements, saying the USB hardware and necessary drivers are not present.  I tried with and without a USB cable installed and also tried to disable the security firewall. It fails for the same when USB problem only connected via WiFi. The discoveries of software troubleshooting HP Print and Scan doctor that the software is not fully installed, for example, without help.  I can connect to the printer and print a test page using my WiFi network using a web browser, and I managed to install it on two other portable Win7 in the past.

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• Online and automated phone activation fails for XP Home

  Activation fails for me for Windows XP Home Edition, after changing a lot of material. Online activation failed. I called the automatic activation phone number where I give them a "ID of Activation" appears on my screen and I like that it is not valid. Microsoft support site sends me to a web page that sends me to a web page that sends me to the first web page.

  How do I get this active?

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

• Windows Update fails for XP and Office 2003 security updates others are OK. Error message is 0x800F0102.

  Windows Update fails for XP and Office 2003 security updates others are OK. Error message is 0x800F0102.

  Ref: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-code-0x800f0102/eefc1d5a-2f89-4676-82fb-1d76debbd13f

  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

• Windows update fails for KB2661637; KB2647516 and KB2660465

  Windows update fails for KB2661637; KB2647516 and KB2660465 - I ran MicrosoftFixit.wu.Run and get the same results.   Help, please... thnx

  Hi SparkySA,

  Follow the steps in the article.

  Cannot install Windows updates

  You cannot install some programs or updates

• Could not open the zone alarm file:Validation failed for c\windows\system32\zpeng25.dll.

  All of a sudden I can't activate my zone alarm service, because I gives me a message that the Validation failed for c\windows\system32\zpeng25.dll.  After you receive this message, I ran software to fix registry errors, but that has not fixed the problem.  I am able to follow the explicit instructions so careful instructions are given.  Thank you for your help.

  Do Zone Alarm support say when contact you? What responses did you get when you posted in their forums?
  http://forums.ZoneAlarm.com/index.php

• X 3500 HNAP call to the device failed for an unknown reason.

  During the installation process Cisco Connect X 3500 briefly to connect to internet (can surf the net very briefly in this window) but when he arrives at the end of the installation it saying unsuccessful then restarts.  Is there a way to manually connect just using the address IP is a browser?

  Error code: 82BD0305

  Error description: year HNAP call to the device failed for an unknown reason.

  Model name: loading...

  Model number: X 3500

  Serial number: unknown

  Firmware version: loading...

  Operating system: Windows 7 SP 1

  Software version: 1.4.12340.0

  Connection type (WAN): loading...

  (LAN) IP address: loading...

  (WAN) IP address: loading...

  The computer IP address: 192.168.1.103

  Found!  At the bottom of the Cisco Connect program window is a link to configure manually via a web browser.