Similar Questions

• vmrun - error: the specified service provider was not found.

  Hello

  I installed vmware server 2 on Gentoo 2008.0.

  Installed versions:

  VMware-server 2.0.1.156745 - r3

  VMware-modules 1.0.0.24

  VMware vix 1.6.2.156745 - r2

  Everything works fine from a remote machine, but if I want to start a virtual machine in the console via vmrun, I get this error message:

  Error: The specified service provider was not found

  Any suggestions how I can fix this problem?

  The problems seem to stem from the fact that you don't have the "vix.libdir" parameter in your global configuration file. Usually, it is located in/etc/vmware/config by the presence of a line like:

  vix.libdir = "/opt/vmware/vix/lib"
  

  If you add to that, vmrun needs to start working.

• the settings have not been saved for the iphone because it was not found

  the settings have not been saved for my iPhone 5 because it was not found

  Nappys wrote:

  the settings have not been saved for my iPhone 5 because it was not found

  OK thank you very much for sharing your question vague.

• Model for the form field option is not found

  Hello - when I tested the echosign function I was able to implement a model of form field that I could then apply to a future document so that I didn't have to recreate all the fields if I replaced a page or change the text under.  Now I am an annual subscriber, I don't think this feature.  Any ideas?

  Hello Emily,.

  The trial version does not have the ability to create the layer of form field model and if you went to the same enterprise-level plan, then the feature would still be there, but if you upgraded your account to 'Send for Signature', then he has that.

  -Usman

• URL of the Web Service, LV2013 vs LV2012 length limits

  (* CROSS POST: http://lavag.org/topic/18435-web-service-url-length-limits-lv2013-vs-lv2012/ *)

  (* Please answer in this forum.  I scored the other thread for responses here. *)

  A that someone noticed a reduction in the limit on the length of the URL for the Web Services between the versions of LV 2012 and 2013?

  Under LV2012, a RESTful web service seems to accept URLS with lengths at least as long as 4096 characters.  With LV2013, the maximum length of URL seems to be 511 characters for RESTful web services as the project item. Unfortunately for me the project, I have converted just travel on this issue. My goal with posting this request here is my understanding of this limitation before deciding the best way to modify my code.  Certainly using POST instead of GET with a long URL is an option, but again, I am looking to understand the change in limitation before choosing a solution.

  To illustrate, I enclose three projects for the most part identical, demonstrating the issue.  In each case, the project contains a webservice consisting of a single VI, 'ComputeLength', which takes a string as an input parameter and that returns the length of the string.  The three projects are the following.

  1 LV2012 RESTful WebService.

  2 LV2013 RESTful WebService.

  3 LV2013 article project web service.

  The web service contains a single VI.  For the relaxing examples, the web service is started by selecting deploy menu of right-click Build specification.  For the example of project item, the web service is started by selecting start in right click menu position of work/WebService. The use of this example is shown with the following URL:

  (Note that the port is 8080 for both relaxing examples and 8001 for the project web service point if used in debug mode, which is the default value for the statement above.)

  http://localhost: 8080/webservice/computelength? string = 1234567890

  And the output looks like this.

  Workaround.  Apparently from 2013 of LV, there is a default limit of 512 to the length of the URL.  The default limit can be overridden as described below.

  Martin

  He is Brian in the technique of applications for National Instruments. I am following up about the 511 character limit in your Web Service HTTP request after the port number. After some research, I realized that the problem is related to a web site by default, the setting of the server called "LimitUri", which limits the maximum length of a URL. The default is 512 characters long that's why we are seeing this problem.

  There are several ways to modify the URL length limit depending on how you use your web service. If you publish the web service using the Application Web Server can change "C:\Program Files (x 86) \National WebServer\NIWebAppServer.conf" and add "LimitUri 4096" at the end of the file without the quotes.

  If you run the Debug Web server simply by clicking start on the web service, and then change "C:\Program Files (x 86) \National 2013\resource\webserver\niwsdebugserver.conf" and add "LimitUri 4096" at the end of the file without the quotes.

• Is it possible to use a Type of personalized content for the REST service operation messages?

  I try to POST to the third party, documentum of EMC, REST service using service broker in 8.53 peopletools integration operations. Unfortunately, the third party only accepts a content type of 'application/vnd.emc.documentum+json', which I could not send PeopleSoft and use a message definition at the same time.

  In my service operation, if I do NOT fill the request message I can POST to the URI with the such custom content type defined in the property page of the connector in the routing. I have not found a way to do it and also present JSON content on demand, since there is no message associated with the operation. Is it possible to include in this type of message content without using a request message?

  If I DO not fill the request message I can't POST successfully because the message content-type of "application/json" gets passed as the content-type instead of the value in the property page of the connector from the routing. Is it possible to change the content type during the use of a message definition?

  Thank you

  Paul

  Hi Paul - you can turn on tracing by using the on demand connection as follows:

  1. on the routing set detail header and detail "journal".

  2. Main Menu > PeopleTools > Integration Broker > Service Operations Monitor > Administration > control installation Options

  -Enable logging of the bridge

  -On the registration of demand = 5 (to enable detailed logging)

  Note: On request connection only works for the outgoing synchronous Services. In this case, we should be fine. You will find the by transaction log file on your gateway web server... / applications/peoplesoft/PSIGW.war/WEB-INF/.

  I did it for one of the REST service operations my test (I'm on 8.52.22). I have my content type of message the value application/json to the operation of the service page. On the routing page, I added a connector property content-type=application/vnd.emc.documentum+json.

  Here are the results on the integration gateway logs:

  Message-ID:<-.................@nowhere>

  MIME-Version: 1.0

  Content-Type: multipart/related; Boundary = "Integration_Server_MIME_Boundary."

  Content-ID: PeopleSoft-internal-Mime-Message

  PeopleSoft-ToolsRelease: 8.52

  -Integration_Server_MIME_Boundary

  Content-Type: text/plain; Charset = UTF-8

  Content-Transfer-Encoding: 8 bit

  Content-ID: IBInfo

  Content-Disposition: inline

  Sync There ... * deleted for security purposes *... ContentSection0text/plainN

  CREATE5000000000000

  -Integration_Server_MIME_Boundary

  Content-Type: text/json

  Content-Transfer-Encoding: 8 bit

  Content-ID: ContentSection0

  Content-Disposition: inline

  username = * collected for security purposes * & password = * deleted for security purposes *.

  -Integration_Server_MIME_Boundary-

  The Content-Type of the delivery is sent as HTTP Connector of the target and the content of the message (text/json) Type property is always persistent (see the text in bold above). You can compare logs between your two scenarios (with and without the message in the POST) and see if you find something interesting.

  I even tried the following code to see if that helps, but I get the same results.

  & MSG. IBInfo.LoadRESTHeaders ();

  / * Adds additional headers not defined on the route * /.

  REM & MSG. IBInfo.ConnectorOverride = True;

  bRet = & MSG. IBInfo.IBConnectorInfo.AddConnectorProperties ("Content-Type", "application/vnd.emc.documentum+json", % Httpentete);

  & RESP = IntBroker.SyncRequest % (&MSG);)

  I'm working on a similar project at this moment where I'm integrating perceptual Nolij Web RESTful API (Document Management System). I had to resort to using a http client base (common of apache) java instead of broker of integration because of the similar frustrations with REST (cookies are lost, unable to deal with raw binary data in a response message, etc.).

  Benefits: Java provides total flexibility.

  Cons: As we are bypassing framework Integration Broker, we need everything (error handlng, logging, etc.) do it ourselves.

• Changed to Comcast modem / gateway of the infinite. Ethernet cable lights are at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to the GREEN?

  Changed the old Comcast to Comcast modem / gateway Infinity with wifi. Ethernet cable lights are lit at both ends, but yellow light flashes on the airport. Diagnosis says not connected, but I have internet service. How to return to a GREEN fixed?

  Whenever you change your network hardware, it's always a good idea to carry out a new round of full power to all your devices. Check out the following Tip of an airport users for more details. Please post back your results.

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• East-redirection of possible connection when the routing service is disabled?

  Possible when connection redirection is the routing service is disabled in win7? I find that this is the case on the following resource monitor. It comes to my ISP. They can redirect my connection like that?

  Hello Newman,

  Thank you for your response.

  I would like to inform you that if any Internet Service provider changes of place, it's legal and it does not affect Internet connectivity.

  Please let us know if you need more help.

  Thank you

• During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't

  During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!

  MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.

  I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled.  Make sure that you use the serial number that ends in 7886.

  If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade.  If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation.  You can contact our team of support directly in Contact with the customer.  You can try to install a web browser, you have not previously used.  It of probably a toolbar or other software applications affect your ability to access the media cat successfully.

  If you are unable to reach our support team, then please check your account information is accurate.  If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.

  I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.

• I need the URL for the default home page so I can put it in my homepage protection, because all I get when I open the browser's "about"white."

  I'm going to hell to get just the URL for the browser/Firefox start page. I just did a recovery image factory and all I get after downloading and installing the Firefox browser a tab that says 'about white." I don't get the URL in the address bar so that I can put this URL in my homepage of protection (I use Advanced System Care ultimate). Once I get this URL and place it in the area of protection of homepage of my security software, I'll be ready to go, because I want to use Firefox as my default browser. I searched the frequently asked questions and asked the question in every way that I know, in English, and there seems to be no one there who can tell me just the URL of the start page. While I do not understand why it is so hard to get, I certainly need and would be grateful for a solution to this problem.

  It is actually called Subject: Home , but the only way to know would be if you were viewing the page and called to the top of the Page Info dialog... who, for future reference you can get using one of these methods:

  • Right click on a box empty page and select View Page Info
  • (menu bar) Tools > Page Info
  • Click on the globe or padlock icon in the address bar > more information

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• How to buy only a few songs, without registering for the new service? It seems compulsory now, and I DON'T want TO.

  How to buy only a few songs, without registering for the new service? It seems compulsory now, and I DON'T want TO. Could someone tell me just for the selection of the menu where I can search for a song by keyword and buy it?

  If it's on your iPad, then go to the app Store in iTunes, you can buy music from there

  If you do not want to use Apple music then turn it off on your iPad via the settings > music > Music Show Apple 'off '.

• Delay (30000 milliseconds) waiting for the SNMP service to communicate.

  When I start the SNMP service in Windows Server 2003 Enterprise 64-bit (SP2), the event ID 7009 (Timeout (30000 milliseconds) waiting for the SNMP service to communicate.), kindly help me to solve this problem.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Data for the Web service control

  Hello

  I have jdeveloepr User 12.1.3, I WSDL soap, I create the data control for the web service from the WSDL, the problem is when creating data controls the separate parameter that the method, for example, below it is the method that I call the setNotificationAction name and the parameter IN (P_ACTION, P_NOT_ID, P_PASSWORD_ERP, P_TOKEN (, P_USER_ID P_USER_ID_ERP), as below, why the separate parameter that the method?

  Note that I try the binding WSDL SOAP UI and its ok and works as expected.

  

  Resolved by changing the typesList.add (Object.class) at typesList.add (GenericType.class)