STATIC

Similar Questions

• Instructions for managing macs w ARD on the internet (no static IP address)

  Please excuse me if it's asked all the time, but I searched and can not find detailed instructions for this.

  I need to manage more than one Mac, on connections to the internet, the devices will not be on the static IP, they will constantly be moving around.

  All the videos I have found online seem to show how to connect and manage Macs on LANs w ARD.

  Details:

  ARD v3.8

  All Mac on El Capitan

  Very appreciated for any help!

  This question is not particularly related to Apple Remote Desktop; for ARD.  This is a configuration of generic firewall and networking question, so good enough instructions for your specific firewall will work here, as long as the firewall can redirect ports - port TCP 5900, in this case - or if your particular firewall has a VPN - Firewall Server average range and high-end frequently - or if you can implement a VPN server behind your firewall and configure the firewall to forward the VPN protocols (different ports) and ports necessary for the particular VPN.

  In general...  I would suggest three ways...   1: set up your firewall to port before port TCP 5900 to the client target.   Maybe TCP 5988.   Or set up a VPN server in your firewall and connect to that and use ARD via a VPN.    If you want to access more than one system on the target network, you will need to either use a range of ports to forward to specific systems behind your firewall and happens to be a problem with many customers - I don't know immediately off-hand if the ARD client allows even to select different target ports - or to set up and move to a VPN.    2: creation and configuration of the VPN server in the firewall allows access to all systems on your network target - a VPN connection makes your local system as it is directly connected to the target network.  3: If you have the VPN server running on a target system and accessible through the firewall port forwarding, this target system must always be available, and all VPN traffic is routed through this system.   It is more complex and can also be a bit difficult to set up.

  If you directly expose ARD ports to the Internet via port forwarding, you'll want to either restrict the available source IP ports (to reduce the magnitude of the attackers), and you'll want to be very careful about passwords on target systems.   Ports of the ARD are detected very fluent, and several people and botnets will attempt to access the system password-baited; trying to guess the users and passwords on the target system.   Once attackers have a login and a password, they will then try to spread throughout the rest of the network.  (It's part of why I prefer to use virtual private networks).

  Sierra of MacOS support PPTP VPN, so I wouldn't go with any configuration of VPN that you considered it.   I'd probably use L2TP/IPsec, because the customer is generally available in most of the other operating systems, Mac OS and iOS.

  There is information available on the network ports used by Apple devices.   If you enable VPN port forwarding, there are discussions on the ports and protocols required to according to VPN you use posted around the ' net and not all firewalls is particularly good to port-forwarding, the protocols and ports VPN. "  Low-end older firewalls and firewalls tend to have problems here.

  To locate on the networks of the target systems, you get to use dynamic DNS from client devices or other means to identify the public IP address that is associated with the target customer.   If customers are roaming on disparate networks and not simply roaming IP addresses on their private networks (these addresses can be fixed through DHCP configurations, too) and if you don't have access to intermediate firewalls, then you will probably have to rethink the entire approach, unfortunately.    Connection to mobile systems distance arbitrary is not especially it is possible, he must do something on the client that "tags" or "ad" its network metadata to your own server from tracking client or server monitoring of some other entity (for example messages to the DNS servers used by the dynamic DNS providers), or the management connection must be initiated from the client.    ARD does not support these mechanisms.   Discussions here can get pretty complex, too--in terms of network configuration, both in terms of security for the clients and servers.

  There are a few related discussions this general topic in the forums. See here, here, here, here or here.

• Airport Extreme - static IP configuration question

  Question: AT & T has us on a range of public static IP address xx.xx.xxx.33 - 38 (six addresses). I already put in place with the gateway, subnet. But I need the Airport Extreme to provide more than just 6 addresses to support all of our devices. Is this possible and if yes, how I have set up?

  Attempted solutions: I tried to expand the DHCP range manually in the settings of the utility. I changed it to 10.0.214.33 - 38 (which was the default range) to 10.0.214.30 - 39 to see if this helped more devices, but she did not.

  Help, please! Our business leaders are coming and I need to have this resolved.

  Thank you

  -bo

  The key is that Apple routers are designed for general public use. They don't have many options when it comes to commercial applications. You better get a router that provides these additional features. I recommend that you consider the research in routers of professional level provided by Cisco (or similar) for this purpose.

  None of the available options, provided by AirPort Extreme, will be able to satisfy your needs network entirely.

  For example, you can use the network > router Mode to 'DHCP' option only This would use a public ISP IP addresses for the base station and to distribute the five for customers... other required network, but you will not be able to use this setting to distribute IP addresses private network customers remaining, as this option disables the service NAT on the base station.

  Will on the other hand, using the NAT and DHCP option would take care to provide for the remaining machines, private addresses but allow only one device is accessible with a public IP address by placing the appliance in a DMZ. Apple calls this a "default host".

• After update 10.11.6 (15G 31) electric guitar Garageband has static fort

  Hi all...

  Not sure if it's my audio interface or the recent software update to blame, but this morning, I used my electric guitar with garageband perfectly without any problems. After that, I installed the 10.11.6 (15G 31) put day and after that, electric guitar Garageband a humming noise entry very loud as very intense static. My audio interface is Scarlett Solo that does not any drivers only, it connects via USB and works. If this update wouldn't have happened I could have blamed the device, also the microphone input works fine it's just the presets for electric that give me the question.

  Anyone else have problems with electric guitar in Garage band after this update?

  Thanks in advance for your time

  problem solved. Apparently the fact that the update and the time where the question arose where it's just one of those unfortunate coincidences. It turns out it's the guitar cable. I replaced the cable and everything is back to normal.

• A split screen device would hold the part of the static web page and allow you to scroll through the rest, it is possible?

  I would like to be able to hold part of a static web page while scrolling down, more often if you follow a tutorial on the screen for setting something with 8.1, (unusual).
  This feature would be similar to what office programs such as excel.
  Is it feasible, or if I should open the same web page in several windows?

  See if it still works.
  https://addons.Mozilla.org/en-us/Firefox/addon/split-pannel/

• Version 29: Address bar is filled with static icons to Firefox. Impossible to type the URL in the address bar.

  I have never seen anything like this before and can't find a solution in support or in a general Google search.

  We have a user who has an address bar has filed with the static icons in Firefox (there's a screenshot if there is no way to predict that). If the user clicks on them, they aren't going anywhere (they shouldn't be here anyway, no?). This user is unable to type in the address bar, either. Not sure if there was an auto-update to version 29 of the next day or not, but Firefox has been uninstalled a sweet version of installed 29 - reasoning that he could be an installation problem. The question remains. This user is not having the same problem with Chrome. Have not tried to breed with another browser on that machine. Have not heard complaints from other users in the Office using version 29.

  Is there a setting being ignored with version 29? Is this a bug? Should we try to install version 28 and see if it's a question of versioning, or maybe something else? Try to eliminate possible problems and move to the next set of solutions.

  Thank you

  Hello Wudumaer, other users have reported that this error can be caused by third-party extensions like Icon RSS 1.0.6...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Static Fort at random

  Hello

  I use

  Mid 2014 Macbook Pro retina 15'

  Always work off OS X 10.9.5

  Logic Pro X 10.2.2

  IO: Avid Fast Track Duo

  KRK Rokit 5 and low KRK subwoofer

  So whenever I use logical just to do everything which, in perhaps the second time all my audio coming out turns into a (very) large static/white noise; stronger than I can even turn my USB interface. Nothing shows through the master or any other track specifically and as long as I keep logic open all the other audio (from ITunes) will be also distorted white noise. Whenever I bounce things this white noise never arose.

  I checked the Avid knowledge base and I was directed to update my drivers... which unfortunately did not work. I have increased my IO buffer size all the way upward as well. The only other thing to note is that whenever I stop the track of the logic of the game, I can hear signals the reverb or the liberation of several instruments creeping, as usual, but distorted.

  The only way for me to give it a temporary solution is to stop logic and then reopen logical and all is well, for another hour or two. I only heard one or two people on other external forums having this same problem which were never fixed to my knowledge, or have been fixed by increasing the size of the buffer. This is not only boring but very dangerous for my audition. Several times on different accounts, I hear my ears don't ring only after a half a second of this static. Any help would be appreciated.

  Thank you

  Kalebh

  I don't know why he made this terrible sound but try uninstalling logic and the update to the new OS X. reinstall logic and try again.

• How do you define a static IP address on an iPad Pro ethernet connection?

  How do you define a static IP address on an iPad Pro ethernet connection?  I use an ethernet USB adapter connected and lightning for USB adapter and it works very well for DHCP connections.  I'm at my lack of something?

  You can't control these things on an iPad, I'm sorry to tell you that.

• static radio

  My clock radio static was when my Iphone is supported by her even if it is off at all!

  Your charger is on the same circuit that your clock radio and you probably have a problem in the field.

• HP LaserJet Pro P1606dn: How to set up a static ip on the HP LaserJet Pro P1606dn

  How to set static IP on the printer.

  Unfortunatle I can't access the web page of the printer with DHCP.

  Are there any options to achieve this without page EWS?

  I can open the EWS page if I connect the printer via USB to give it a static IP address?

  Welcome @munish259272,

  Thanks to their participation in Forums of HP! I see by your post that you want to configure a static IP address for the printer. I can help you.

  You will need to access the server the printer embedded Web via IP address of the network printer.

  I have provided a document to configure the static IP address, go to Solution 4: assign your printer an IP under Windows: does not maintain connection printer wireless. Do not take into account the title.
  
  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• HP H1W67EA #ABU: static noise in my new laptop computer

  I get a low static sound in my computer hp laptop, also one of the lights on the side of the laptop (seems to be the light of the hard drive) continues to blink on and outside.

  @Laura1989

  Thank you, it works much better. It comes to the support page for this model.

  Drivers & software for computer laptop-15 r101na (ENERGY STAR) - HP

  Also, here is the interview for this series of mobile guide. Inside, you will find other information, such as the locations of the LEDs, to better identify those who may be flashing irregularly.

  HP 15 laptop HP 15 TouchSmart PC Compaq 15 Notebook PC Compaq 15 laptop TouchSmart laptop - Guide Service and maintenance

  Notable static noise still, or is it more when the volume is in place?

  The noise seems to vary depending on what you're doing? (moving the cursor of the mouse, for example)

  Has been present static noise immediately when you first power on the laptop, or was it after using it a bit, or go online?

  There is only the driver on the site of Windows 8.1, but it may be worth put it back.

  Driver Audio Realtek High definition (HD)

  In addition, you should look through the following measures. I realize that you have sound, but many of the steps are still useful for the problems of sound quality.

  No sound from speakers (Windows 8)

  I would like to know if this helps and if not, then please post the answers wonder and I hope, it will point to a solution.

• iPhone has a lot of static noise on the bluetooth with my built-in car phone connection

  Hi all

  I have the new iphone SE and talking with my hands-free kit.

  the other sounds of the game has a lot of static noise and he get to to the point that I do not understand what they say.

  so far, I got iphone 5s connected to this car phone, and it worked fine.

  How can an idea be fixed?

  Thank you

  Sigalit

  Engineering Apple is aware of the problems of the SE has its bluetooth & working on a fix.

• The PC HP Pavilion Sleekbook 15: Blurred and static Audio after update of Windows 10

  I was using Windows 10 quite a few months now with no problems. My sound has been clear until this morning when my computer automatically updated itself. After the update, I noticed that my sound (which worked perfectly fine before the update) was blurred and subdued, with a noise static when the music I listened to hit a higher mark. This had not happened before. Not until I've updated. So far, I checked to see if I need to update something new for my audio device in Device Manager, but I was told that everything is up to date.

  Previously, a few years ago I had a similar problem when updating from Windows 8, but rather my audio is completely out. Waiting to see if something like that happen again. I'm not sure what to do on my audio now, but I'm afraid to uninstall my sound card where I can bring him back despite says he's coming back. In addition, I don't know what to do for my specific product. I've read that many others have had similar problems, so if someone could help me I would be very grateful.

  Thank you in advance.

  Hello

  You can update driver Audio IDT high definition (HD) and check?

  Version 6.10.6425.0

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59802.exe

  Also, I suggest you to disable all the improvements in the properties of speakers and check out. See the steps below:

  1. Press on the key Windows + X.
  2. Click on Control Panel.
  3. Double-click the sound icon and click on speakers.
  4. Click on Properties.
  5. Click the enhancements tab.
  6. Now, click on "disable all sound effects.
  7. Click OK , and then check if the problem persists.

  If the problem still exists, as a solution, I suggest you uninstall and reinstall the sound drivers in compatibility mode and check if it works for you,. Refer to the steps below:

  Follow the steps to uninstall the audio driver:

  1. Press the Windows key + X key , and then click Device Manager.
  2. Expand 'Audio Video and Game Controllers'.
  3. Right-click on the audio device listed and click on 'Uninstall'.
  4. Select the option to remove the software driver.
  5. Restart the computer after its uninstalled.

  Now download the drivers from the manufacturer's Web site and install it in Windows 8.1 compatibility mode. Follow the steps below to install the drivers in compatibility mode:

  1. Right click on the driver configuration file and click on 'Properties'.
  2. Click on the "compatibility" tab and check the box ' run this program in compatibility mode for "and select operating system Windows 8.1 since the menu drop-down."
  3. Click 'Apply' and click on 'OK' and run the file to install it.

  Hope this helps you...

  Click on Bravo and accept as a Solution if my answer was helpful and answered your question.

  I am an employee of HP!

• Static IP address of WiFi requires the DNS server

  I was able to confirm this on two separate MacBook Pro (various models) the two Yosemite running 10.11.4.

  After assigning a static IP address to the wireless network interface, the MacBook ping to a address beyond the gateway by default unless there is also a DNS server on the wireless interface. I wouldn't need a public IP address ping DNS server.

  For example:

  This method works.

  

  But it does not work:

  

  

  At least I have change the DNS like this:

  

  Then it starts working again.

  I tried to initiate a capture of packets and the MacBook is not even send ping on the wireless interface requests unless there is a static DNS server assigned.

  Can anyone other confirm/deny this behavior for me?

  Thank you

  Rob

  What exactly are you trying to do?

  You try to assign a Mac with a LAN IP address? If so, do it in the router by selecting an IP address on the local network to use with the Mac Machine (MAC address). This assumes that your router is your DHCP server. Otherwise, you need a DNS server that is running on your local network to be able to distribute IP of DHCP addresses.

• Migrate server DHCP static leases

  Hello

  We currently use an old Mac Pro as a DHCP server, use the latest version of server of El Capitan. Now, we want to copy all the static DHCP leases we have implemented (approximately 120 static leases), so that we can put them on another Mac mini, this time takes up half of the leases for a different subnet.

  I know that the DHCP leases, temporary positions, are saved in a file that you can delete to erase the leases, but I have not found where static leases are saved. I know that you can change in the Directory Manager application, but I need to export them somehow, so that we can easily migrate. A Time Machine backup is not an option.

  Thanks in advance!

  See you soon

  Apple's DHCP server configuration file is /etc/bootpd.plist

  The file you're looking for is/etc/bootptab , but it is also possible to set static IP cards in Open Directory itself in the computerssection. If a card is defined in/etc/bootptab it takes precedence over the setting in the Open Directory.

  You can perform the following operations in Terminal.app to get more information

  Man bootpd

  bootptab man

  The file that contains the list of active leases is/var/db/dhcpd_leases

  It's a little ironic that Apple uses the name dhcpd_leases dhcpd is a different program from the competing DHCP server to the bootpd use of Apple program. Bootpd Apple is highly personalized on the original version of the open source to add for example the NetBoot support.

• Built-in microphone for Satellite A350 / 07 h pick up static

  Hi all

  Enough in computer science when it comes to the day-to-day management of a computer, but I'm having big problems with my microphone on my model satellite A350 / 0 H.

  Whenever I try to talk to anyone using Msn, all they can hear is static and a small amount of my voice. I currently the amp microphone 0dbs and it helped a little, but is there anything else I can change levels of?

  I have windows vista 32 bit and really dnt want to buy an external mic!

  Recorded playback of my voice is fundamentally static as well!

  Hello

  To be honest I have never had a problem with the microphone yet so I can't say much on the subject, but in your case I would start with driver updates...
  You need to update the driver for the webcam because the microphone is a part of it and the audio driver. Both can be downloaded here:
  http://EU.computers.Toshiba-Europe.com/ > support & downloads > download drivers

  If it doesn't work you should also update your BIOS. You can find it on the Toshiba site too.

  By the way: the Vista version are you using, is it preinstalled Toshiba or did you do your own installation?