StationGlobal.ini corrupted file

Similar Questions

• Corrupted files. Are related to unsuccessful attempts to download SP2?

  Hello! I tried to download SP2 without success. I ran the SFC scan and, including the results for you to see. There are several corrupted files that could not be repaired, and I don't know what to do next. Any suggestions? These files are associated with the failure of the SP2 download?

  2009-07-14 13:02:28, CSI Info 0000013 c [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-07-14 13:02:35, CSI Info 0000013e [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-07-14 13:02:35, info CSI 00000142 [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted

  2009-07-14 13:05:29, info CSI 00000196 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2009-07-14 13:05:30, CSI Info 0000019a [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-07-14 13:05:30, CSI Info 0000019e [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted

  Free help with Service Packs:

  	If you have problems to install a service pack, Microsoft is here to help, for free. Microsoft provides free support on any issue you have with the installation of service packs. For more information, please visit the support site for Windows Vista Service Pack. Installation Windows Vista Service Pack support

  See you soon. Mick Murphy - Microsoft partner

• went to the command and put in findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt to find the corrupted file and nothing happened

  I had a problem with my laptop. I let a friend use it and she got a virus. The screen is black. She took it to get fixed. When she returned I couldn't open some files. (Always have this problem with some files) my shortcut icons are no longer there. Then I get this message on the Catalyst Control Center does not work. In any case, I did a scan and he told me that I had corrupted in my cbs log files so I tried to do the command findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt to find the corrupted file and nothing happened. Help!

  Hello

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  It might also be a good idea to updare drivers network - NETWORK card (wired) and WiFi (wireless)
  by checing at the site of the manufacturer of the system/card mother and/or sites of the manufacturer of the real device.
  Methods for manual update of driver at the end of this response.

  --------------------------------------------------------------------------------------
  --------------------------------------------------------------------------------------

  For settings.ini as this article sets out the question may be totally ignored.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets
  for the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
  http://support.Microsoft.com/kb/947595

  -----------------------------------------------------------------------------------------------------------------------------

  These errors only are in the settings.ini for the sidebar and are not a serious problem by all means.

  Close the sidebar for that.

  Something else for the settings.ini - run AutoRuns and look at the entries SideBar Gadget - y at - it
  all pointing to is no longer present as temp files or uninstalled gadgets or not running?
  Those who will reflect the "yellow icons" on the left side and the files/folders will not exist. If so just
  Click on it and delete - Reboot. This may correct the errors that you see.

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  -------------------------------

  Another process to try is to remove everything except a gadget - everything what you think is the most simple, that you use.
  Maybe the calendar. Then RESTART - use another simple gadget, and delete the first class used
  -RESTART again. See if that helps.

  Rarely, the error causing the problem with the sidebar and not not affect the system in general.

  The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets to
  the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
  http://support.Microsoft.com/kb/947595

  -------------------------------

  Another method to try with the SideBar works does not is to copy the Settings.ini to another folder and
  and then delete - then start sidebar.

  --------------------------------

  For tcpmon.ini and settings.ini:

  You can also try to restore any copy of a Vista DVD (even 32 or 64 bit however).

  Access files on your Vista installation DVD
  http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html

  How to extract system files missing from the DVD of Windows 7/Vista.
  http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/

  ===================================================
  ===================================================

  Also update your drivers: (WiFi (wireless), NIC (Wired) and others as required)

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Desktop.ini corrupted

  Ran/scannow SF and in the report, it said my desktop.ini is corrupt and could not be repaired.  The best answer that I needed, I get a clean desktop.ini file from another computer, but I can't.  Any ideas how to solve this problem or where the web can I go and get own desktop.ini running Windows 7

  No I have never had a clear answer to my question. I have however discovered that they are many in my records of more than 80, desktop.ini scattered in my c: drive.  I also discovered that the KB3022345 update is probably the cause of the problem, the problem being the SFC/scannow showing corrupt files found where these files are not really corrupt.  See the link for more information about this update.

  http://www.InfoWorld.com/article/2922324/Microsoft-Windows/Windows-usage-Tracker-patch-KB-3022345-triggers-sys-file-corruption-which-SFC-is-unable-to-fix.html

  The very big problem after running SFC/scannow, it's that he has locked my user profile, I don't have one that I am the only user of this laptop, and so when I connect my desktop disappeared, came back to the default, and a message appears at the bottom left saying it can not load the user profile and system uses the user profile by default in place.  I had a * to find solution to this problem and how to fix it but finally was able to do so after trying all the other suggestions, the only one that worked made a few small changes in the registry that knowing how even a small mistake can really mess up your system, I followed the well written directions and everything is back to normal.

  Thanks for your help. Andrew

• How to fix or reproject corrupted files

  My operating system is Win 7 x 64 IE9. Recently ran sfc/scannow and found corrupt file "tcpmon.ini". This has to do with the printer and don't know if it is an anomaly and is safe or not. MSE is my stand-alone antivirus that I ran and the results were negative. Also, in my toolbox I SAS, MBAM and TDSS which I ran and these newspapers were negative. Mr. Fixit said that my system is OK. I haven't added new programs and others for a while, and the only thing that has changed is a new mouse.

  The reason why I ran sfc/scannow, it is that I do regularly. Since Windows Resource Protection could not fix nor reproject files I did further research and came across a program called ICE ECC, which claim to repair corrupted files. I downloaded and saved on the desktop and have not implemented. I wanted to know if anyone has any info on this program, and if indeed it repairs the corrupted files. All advice would be appreciated.

  You have a link where you downloaded this utility?

• Firefox hangs out because of norton toolbar - get corrupted files

  Hello

  Recently, Firefox crashes * much * to exit. Sometimes I quickly leave Firefox when I switch to another application, and then a few seconds after the release, the crash reporter will appear.

  I've read elsewhere that it could be caused by the Norton Toolbar. I have the latest version of Firefox 38.0.5 and the Norton Toolbar 2014.7.12.14, and I think they are compatible, but I don't think.

  In addition, I make violations of integrity on my PC Windows 8.1. SFC is display of corrupted files. I was able to set this number, only to return the next day. I understand that a program ending abruptly can cause these corruptions, so I wonder if Firefox is the cause?

  In a world of perfect Mozilla and Norton would work out their differences. For now I have disabled the Norton toolbar, which is not a solution because I need to stay safe as I Browse. I'd rather not spend in IE or Chrome or the other. This isn't a solution.

  Everyone knows about this problem? Does anyone have a solution for my particular case crashing on the release of Firefox?

  Thank you

  MRINTRBL7
  Michael

  Hello. It has been another week. Still no hangs out. I think that uncheck use hardware acceleration has worked.

  MrIntrbl7
  Michael

• Extraction of the installer of Firefox 4.0. EXE failed - corrupt file - what to do now?

  I downloaded this configuration file, and when I tried to run my window of downloads, the extraction failed because it is a corrupted file. Is there another source of this file as well as the other file in the folder Firefox 4.0 English of the United States?

  You try to run Firefox on Windows 98 (not windows 2000 as your user agent claims)? then 3.6 is the highest, you can run on such ancient operating system

• Full Mac, trying to move the library to SET of photos, but there are corrupted files, cannot locate these files and am stuck!

  Mac Tips Please! I bought an EHR to move my entire photo library like 7yr old MacBook is full to the brim and I need to backup my phone as his shattered and needs sending out of fixing!

  Now, it won't save my picture library on DHM (to remove Mac) as some pic (s?) (among the 35000) are corrupt (but I have no idea of who or how many). I tried to restore the library several times, but then it freezes and says it cannot open the library, it can in fact - but not when restoring it.

  I have now to turn my new SMT in another time machine and saved everything on there. Should I try and remove my library on Mac and then restore from time machine? What this will do to my corrupted files? And it is likely to be able to register then EHD?

  Photo, not iPhoto uses...

  Adevice greatly appreciated!

  What size is the drive?  For Photos, it may be only Mac OS extended (journaled)

  and you can't have photo library on the same amount of time Machine backup

  You can probably clone the library for the EHD with SuperDuper or CarbonCopyCloner or other clone software

  LN

• Unable to downloand and install firefox, corrupted file error

  with or without virus protection, firewall or any security turned on I have download corrupted file. If I leave settings in my regedit I get unauthorized certificate. I had firefox working and silly then me things locked up and stopped so I uninstalled and cant get it back, tried system restore and still bad, checked for viruses and malware and firefox software is what does not work

  I thank you for your help, come and find the problem was with my ISP and my cable modem.

• Download Aurora corrupted file

  I am trying to download the Aurora of Firefox version on my computer and it says corrupted file everytime I try. Please can you fix this

  Thank you

  Hello

  Please try this: https://www.mozilla.org/en-US/firefox/channel/

  I think that generally the file is digitally signed. So, you will need to make sure that the integrity of the file is maintained during the download and after downloading.

• Firefox installs not and showing error 'corrupt file' worm 3.6.3

  When I try to install fiefox 3.6.3 show me Extraction impossible corrupted file

  This has happened

  Each time Firefox opened

  Once downloaded and launched to install

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; Chrome/5.0.307.1 en-US) AppleWebKit/532.9 (KHTML, like Gecko) Safari/532.9

  Here is a direct link to 3.6.3: https://ftp.mozilla.org/pub/mozilla.o.../Firefox%20Setup%203.6.3.exe

  Try to download again the link above, to ensure that you have a clean copy.

• Product recovery does not work on Equim L40 - corrupted files

  I was wondering if someone can help me.

  I've had this laptop for a few months and wanted to do a clean install of the system today and after that on several occasions now she crosses the CD and gets Strawberry where he deals with the new facility and after all away three-quarters through her comes to us in fact say "error: complete failure due to corrupt files.»

  I don't understand how this can be if she tries to re - install the system from the recovery CD.

  Does anyone know how to fix this?

  Hello

  Maybe is the default of restore CD. I think that your neotebook is still under warranty. Go to a Toshiba ASP allow to check the recovery media and if it is fault they replace.

  CU

• Satellite L350: Vista doesn't work anymore - LogonUI.exe - corrupted file

  Security Suite updates on my daughters Toshiba Satellite L350 windows vista the operating system no longer works.
  An error was detected on the system that contains the following message.

  Open a session about UI.exe - corrupted file
  File or directory C/Program ~ 1 / Toshiba/Smart face V is corrupt & unreadable.

  I tried to run a system restore to the last configuration on both computers, but always the same problem exists. I also tried to restore the two laptops to the factory settings, but the system still does not work. I don't have a restore disk as disk Toshiba HARD drive recovery is on the laptop.

  Can someone help me or suggest any way I can fix it both of these laptops. It seems very strange that both of these computers have stopped working at the same time according to windows automatic updates in October 09.

  Thank you Gary

  Hello

  AFAIK the LogonUI.exe is responsible for connecting to the Windows operating system.
  If the exe file is corrupt then you won't be able to connect to the operating system.

  You don t the recovery disk but you have the HARD drive on the second partition recovery this may be your last resort.

  Switch on and press F8. Choose fix my computer.
  Then new window appears offering the option called: HARD drive recovery.

  Choose this option and see if you can start the HDD recovery procedure.

• driver hp laserjet p1006 Downloads Download but corrupt file message when trying to launch installation

  The 64-bit window 7-bit driver downloads download successfully.  Double click on download to start the installation results pilot in the corrupted file error message.  What is the problem?  the file security settings, other?

  Or no download from another browser, or the download link have failed.  The latter generated the message file is corrupt. Extraction failed.  Former computer warns the file is not not a common download and could cause problems (a security message to ignore maybe, but I had such drawn on computer problems this week I can't afford to take the chance) I'll leave this question for now and will be instead of tomorrow's computer service.  Thanks for your help.

• How to find corrupted files and remove them on mac i

  How to find corrupted files and remove them on i mac?  AM currently using OS x EL capitan 10.11.12 Mac said to run slowly and the recent upload did not work until the 3rd attempt.

  Thank you

  You do not have.

  You can run this program and post the results so that we can see what you have installed that could cause your problems.

  http://www.etresoft.com/etrecheck