Status of messy score in several hard drives

Similar Questions

• Dell Precision 690 workstation several hard drives

  I have a Dell Precision 690 and I am trying to connect the hard drives in the right order. The documentation says they must go into the HARD drive marked locations on the motherboard, but they do not work. The only slots that work are the SATA slots. I tested five SATA drives but I can only get three to work on three SATA slots instead of four locations of HARD drive and slot extra SATA as the book said to do.

  I tried which helps the controller under the BIOS: has no significance if it is enabled or disabled. I determined that AHCI is unable to be activated, it must be ATA.

  In the end, I need to have five total drives. Four in the slots in the HARD drive and the other in the SATA slot. (Which will be for operating system 1 SATA and SAS RAID 4). I realize that the HDD_0, 1, 2, 3 locations are to use SAS/SATA but I can't take too much work.

  In addition, I don't ' know if this is important or not, but he has Windows XP Professional x 64. BIOS A05 and I know an update is A08, I did do that yet though.

  Anywhere I can find that material assistance would be much appreciated.

  -E.Avalon (help).

  Yes, there are three ports labeled SATA (0,1,2) and four ports labeled as HARD drive (0,1,2,3). The manual says to connect hard drives in HARD drive ports, then in the SATA ports. The first two SATA ports are for additional optical drives and the last port is used for a fifth hard drive.

  I got in touch with several people in technical assistance from Dell and eventually find the right driver to install.

  Because I don't have the OEM disc that came with the computer, I was doing a new installation of a Windows disc. I needed F6 (third party drivers) to activate the HARD disk ports until the installation has taken place. (And honestly I don't remember what the file was immediately.)

  The AHCI could not be activated because the discs I have are Serial ATA disks and in the BIOS, there is a choice between ATA and AHCI.

  The problem is solved and I feel like I could do a test on this computer and become a technician for her.

  -E.Avalon

• Windows 7 seems to have unexplained memory use high after a scan of viruses of several hard drives.

  My computer:

  • 6 GB of installed memory, normal use is about 1.5 GB
  • 3 hard disks of the computer (OS [Raid 0]. 2 data readers)
  • Windows 7 64 bit

  Problem:

  • After analysis the entire computer, the use of memory up to 3.5 GB of jumps and stay until the computer is restarted.
  • Research in the Task Manager and resource monitor shows the memory used, but running programs don't add to what be close to 3.5 GB
  • I tested it with AVG and Avira antivirus, and it happens with both. Then he would lead me to believe it's a matter of Windows.

  Troubleshooting:

  • Tried it with several antivirus, same problem with ones I've tried.
  • Scanned just the OS partition without significant increase in memory usage.
  • Scanned two data discs. Memory usage has jumped about 1 GB during the analysis of the first hard drive and another 1 GB when on the second disc. Use of memory are remained high, once the completed scan. Subsequent analyses retains high memory usage.

  Question:

  • What is causing this behavior? Indexing, or is it some sort of memory leak?

  The answer can be found here.

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/50e505cb-00C2-4c86-BF08-e9c926a4982a

• Is it possible to split the Windows 7 on several hard drives?

  Hi all!

  I have a question I asked on for a while and have never found an answer to.

  I use Linux and Windows together and I like the two operating systems, and one thing I LIKE about Linux, it is how it is easy to split on several partitions/hard disks.  If I want to put my/home folder on a different partition of the root folder that is located on a different drive of my Swap and / boot partitions, no problem! In fact, in some ways, it is almost encouraged/forced to make a system like this.

  Now, my question is can I do the same thing during the installation of Windows? (I mean Windows 7, but a response for all versions would be nice, too.) Specifically, can I have my 'Program Files' and the contents of the "Program Files (x 86)" folder exists on another drive and the rest of Windows partitions and have these partitions mounted these subfolders under C:\? The reason why I ask is that I received a Solid State Drive, and I don't want to fill it with all my programs/games that exist in those folders.

  Thanks a lot for the answers you can provide.

  Sincerely,

  Austin

  There are some things you can do with Windows, but not to the same extent as Linux. Read the article below.

  How to pass Windows 7 to a larger hard drive to a smaller SSD drive using Acronis True Image:
  http://www.PAGESTART.com/win7sddatihim05011201.html

  J W Stuart: http://www.pagestart.com

• The reorganization of several hard drives in customers?

  Hi again.  I'm under VMware 6.5.1 Windows XP host, Linux comments.

  I have several VMware "virtual hard drives" in my comments.

  There seems to be no UI within VMware to establish the order of in that these disks are visible.  When I create and delete records over time, the order gets randomly mixed around.  This causes problems with the start of Linux.

  I can manually edit the GRUB file and fdisk, but it is a pain,

  as it must be repeated for each guest and wonder if there is a

  best way.

  If the VMware UI to edit the comments configuration had a 'Move up' and 'Move down' button for devices, it would be great!  It would be useful to establish the order of hard drives, and other devices such as Ethernet cards.

  As a feature of the wishlist, it would be nice to have a way to specify where each IDE drive appears to.  Main master primary slave, second master, secondary slave.  Similarly, the SCSI drives should allow me set the device ID.

  Yes, there is a current solution for this limitation, which will allow me to rearrange the order in which records are visible in the comments?

  Thank you!

  Josh

  Two ways to Rome...

  through GUI: select the disc in question in the form "Edit virtual hardware" - click on advanced - the value of the scsi0.0 device node. or else - there is a drop-down list for this operations

  by editing the vmx file: adjust the entries in the vmx manually - file make sure you do not change the device for the boot disk node

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Total GB of VM with several hard drives

  Hi all!

  It is probably an easy one.  How can I get the total amount (GB) of hard drive space to a virtual computer with multiple disks.

  I used the following to get the result.

  $harddisk = get-machine virtual vmname | Get-hard drive

  $harddisk.capacitygb

  If the virtual machine has 3 discs to 100GB each output is:

  100

  100

  100

  How can I add the total of each disk and total output?

  Any help is appreciated!

  -Justin

  Use the Measure-Object cmdlet.

  $harddisk | Measure-object-property CapacityGB-sum | Select sum - ExpandProperty

• Several hard drives

  I just got a Dell 2950 III with 6x1TB drives that I intend using virtual machine. What is the best way to put in place so I can enjoy the storage full I availible for VM? Should I go ahead and install ESX then in ESX create extensions? Or do I have to go about it another way?

  And just as an observation. I received that one server at the moment, but our final installation will be actually 2 Dell 2950 III with discs hard 6x1TB.

  And if there is a post somewhere before in this topic I apologize.

  As a first step, you should think about type of load disk in your virtual machines and choose appropriate RAID. Then slice it to LUNS not more than 2 TB each.

  After that ESX or ESXi will create default layout on LUNS that you choose to boot from and automatically creates the VMFS data store on the remaining space. ESX take a few gigabytes for himself.

  All other LUNS will be available for manual creation of data store.

  You can of course check if Xtravirt Virtual SAN is interesting for you, because the ESX servers with BIG local data store is primarily intended for server consolidation.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• How to set up power for several management options hard drives individually

  original title: Power management for several hard drives

  Power management for hard drive in the control panel offer 1 framework that applies to all readers.

  1. assuming that all readers have disabled for inactivity. If one of the disks are requested locally or on the network, will be then just that turn a drive upward or all readers on the spin from the computer to the top?

  2. is it possible to manage power for readers options individually?

  3 - is the feature of power for hard disk management change between XP, Vista and 7?

  Thank you
  Anders MP.

  Hi amps2007,

  Windows XP, Vista and 7 do not support this feature.
  You have to look at 3rd party management of electricity in order to have the Player control you're wanting.
  I hope this helps.

• How to change the hard drive from the slave to master drive?

  Original title: drives hard slave to master, how.

  I try to use an external hard drive carrier to download my data files on my laptop. One worked as a data file. The second and third would not show.
  They can be slaves, so how can I change the masters so that I can download them?

  If the suggestion to use disk management doesn't help you, please explain what you mean by "first' and 'second and third."  You have several hard drives, multiple partitions on a single physical disk, or just several files?

  Also explain in detail the steps you take to 'download' (i.e., transfer) the files to your laptop.

  Status 'Master' and 'slave' is not applicable to your situation.

• MISSING hard drive volumes (D / & f /)

  I got 4 partitions on my hard drive(C, D, E, F). but now I can not find D & F readers 

  Windows displays C & E readers. readers D & f are missing.
  
  also, when I attach my USB, windows displays the USB in the D drive under devices with removable storage

  How can I find the 2 lack of readers back?

  Help, please...!

  Hi John,.

  -You have all four partitions on a hard drive? Or you have several hard drive installed in the computer?

  -Since when are you facing this problem?

  -Don't you make changes before this problem started?

  This can happen if you have several hard drives on your computer and if you lose the connection to one of the hard drive.

  First of all I suggest you to check if you have several hard drives and check the connections.

  You can also go to disk management and check if the hard drive and partitions are recognized in disk management.  To access the management drives follow the steps below:

  1. Click Start.
  2. In the start menu search box type diskmgmt.msc and press ENTER.
  3. In disk management, check the reader connected to the computer and the partitions.

  Post back the result, after checking with the hard disk in disk management and by checking your computer for several hard disks.

  I hope this helps. Post back and let us know the status.

  Thank you and best regards,

  Srinivas R Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to print a list of the contents of a hard drive?

  I have several hard drives, going back 7 years now and I want to sort through them to back up important files.  How can I print a list of the contents of a disc on my iMac that will help me in the archive and help me manage this backup files which are really important on a separate drive?

  You have a lot of paper?

  Download a copy of the text Wrangler, install it, open it and drive to the open application icon

• C670-12 x satellite doesn't recognize any HARD drive

  Hi all

  My Satellite phone (C670 12 x) does not recognize the hard drives (the bios boot). I tried with several hard drives. I was wondering if a Bios update would be useful? Y at - it an update of the Bios Flash boot CD?

  I already tried to convert the Bios on a bootable CD driver / image, but that did not work.

  Thanks in advance,
  Gunther

  I put t think that BIOS update will be helpful. Try to set the BIOS to default settings and check again. If the same thing happens again it can be this HARD drive controller is defective.

• Computer HP laptop 1045dx-M6 won't recognize hard drive

  I have a laptop HP M6-1045dx who has a problem with the recognition of the main hard drive. I tried several hard drives (one of them had windows 7 installed top for the laptop) and none of them are recognized by the laptop. I'll even in the verification of the HP hardware by pressing F2 and it did not recognize. When he did recognize, Windows 7 would freeze and then the blue screen of death. When I want to reactivate the laptop, the hard drive is no longer recognized. It would, in fact, the cable from the hard drive or is - what a card mother garbage? Help, please. Any help is greatly appreciated. Thank you very much.

  Looks like the motherboard, I'm sorry to say.

• his long of high height of 1 sec of the hard drive?

  Toshiba Satellite L40-139.

  I would like to ask if anyone else has experienced: the HARD drive makes strange noise, the noise is a random high pitch 1 long beep second, followed by a clicking noise.

  The HARD drive model is: MK1237GSX DL130M

  Department of Apperently Toshiba HARD drive will not be replied to my question, I wrote 2 times now and got the promise that they would get back to me within 24 hours, which they never do!

  My question is simple: does sound HARD drive is defective?

  So let me to know if someone else has experienced.

  By profession, I am a supporter-IT and I heard several HARD drives about to fail, but I have never heard of this kind of her before.

  With greetings

  JBJ

  Hello

  > Apparently Department Toshiba HARD drive won t my question answer, I wrote 2 times now and got the promise that they would get back to me within 24 hours, which they never do!
  They respond to? As much as I know the Toshiba does not directly e-mails. If someone has a hardware problem, then you will need to contact the ASP in your country.
  It is a usual way to account for certain issues or hardware issues with Notepad.
  So I wonder not if you get no answer

  With regard to the spontaneous tone.
  Well, it's really not easy to say what causes this without any detailed mobile controls.
  Second it looks like that it of not easy to reproduce this beep. Thus, the investigation could be more difficult.

• Question about the use of foil with HARD drive

  Hi all
  Please can someone tell me what a sheet of aluminum covering the hard drive for laptop for?
  I guessed that it's temperature.
  But some information I found says the opposite.

  "
  My Seagate hard drive hot enough during long extensions CD writing/Back Up...
  Everyone recommends the use
  the foil of Food Grade to dissipiate heat?
  In my experience, things hot wraped in paper Aluminium gets cooled quite quickly... »

  My old man was a problem of partition table, I got a new and reluctant to cover it with a sheet.

  What do you think about this?

  Sombatk

  Hello

  I have replaced several hard drives on some laptops but I have never used any further papers of aluminum and I have no problem with the temperature.
  In my opinion, it is not necessary.
  The cooling modules must be able to manage the temperature of the HARD drive.