Computer HP laptop 1045dx-M6 won't recognize hard drive

Similar Questions

• Inspiron 1721 won't recognize hard drive

  I replaced new hard drives with virgins, but I cannot now reinstall Vista from the DVD of resettlement because no disk is considered.

  I updated the BIOS to the latest version available, but still no joy.

  I took on the readers and, using an external HARD drive port, can be accessed from another PC, so I am sure that there are no problems with the discs themselves.

  I tried the Paragon Suite 2010, but even this cannot 'see' readers, so I deduce that it is a problem with this model of Dell.

  I would be grateful for any advice.

  Thank you

  Dave

  This system uses an AMD chipset - you probably need the RAID AMD drivers

  support.AMD.com/.../raid_windows.aspx

• I have a computer laptop envy m7-k111dx and the hard drive has gone bad

  I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles

  Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• My laptop Windows XP think my external hard drive is defective.

  My laptop Windows XP think my external hard drive is defective.  It works fine on my desktop PC.  Having the same problem with my USB and my printer all on the same laptop.  All are USB devices that work fine on my desktop PC.  My external mouse and my digital camera are also connected by USB, and they work well on both computers.  Before this week, all the devices worked fine on both computers.  The resolution of the problems of the Device Manager was of no help.  What bad past and how to fix it?

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. what exactly happens when you connect devices to the laptop? You get the error message?
  4. have you tried to connect to USB ports and check?

  Step 1: Plug these devices and then try to run the fix it tool article.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: You can also try the steps outlined in the article below and check out them.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• How to reinstall Vista (using the HP recovery disk) to my laptop HP that has a new hard drive

  The hard drive failed on my HP laptop.  I bought a new hard drive (not HP) and loaded the HP recovery disks, but a screen will appear that says it is not compatible.  Can I use this new hard drive, or should I buy a hard drive for HP?

  I looked at a few tech forums and from what I can tell, HP crashes their system you can't use hard disks of third parties.  To make a third hard drive to work (depending on the online forums), you will need to bring a technician certified in HP in order to run a utility of DMI (?) and "tattoo" the hard drive for HP use (estimated at close to $45).
  I can't find a technician certified in HP in my area and Geek Squad said that they can do it more... my laptop is now an expensive paper weight, or there at - it another option (short of spending hundreds of dollars on the purchase of a new Vista + MS Office license)?

  Hello

  posters have reported problems with the use of a replacement hard drive not HP, etc.

  as you say you know the answer to your problem buy a new hard drive from HP and then reinstall using their recovery disks

  If you have problems with the HP recovery process, contact the manufacturer

  It's their recovery process not microsofts

  HP support

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  HP support forums

  http://h30434.www3.HP.com/

• Hello. Hard drive of my computer totally crashed & I had to wipe my hard drive. I wasn't able to log out of my apps for the creation of clouds which my wife has 2 licenses for us. Can someone please explain the process to re download these apps please

  Hello. Hard drive of my computer totally crashed & I had to wipe my hard drive. I wasn't able to log out of my apps for the creation of clouds which my wife has 2 licenses for us. Can someone please explain the process to re download these apps please? Thank you..

  Hello

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• How can I load my CS5 on my new laptop that does not have a hard drive?

  How can I load my CS5 on my new laptop that does not have a hard drive?

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• HP laptop Pavilion 11-e110nr: upgrade disk HARD drive computer disk SSD for HP Pavilion laptop 11-e110nr

  Hi, I want to spend my hard drive to drive SDS to my laptop HP Pavilion 11 - e110nr Notebook PC, I want to use for this SDS to do:

  My question is: my computer supports this SSD?

  Yes. It's not really hard to do. See pp. 41 and 42 of the manual here:

  Repair manuals

  After back with other questions. The question will be how migrate you files and software. We can help with that, if you need it.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion laptop laptop 15-au20nl: adding a 2nd hard drive to computer Pavilion 15 laptop-au20nl

  Hi, I just picked a new Pavilion to the-20nl and I need to add a second hdd for my personal files for the existing SSD.

  Before you open the laptop, I would like to know if it is possible. Did someone just tried?

  Thank you

  Concerning

  Luca

  Hi @LucaV,

  Thanks for getting back to me with the information.

  Please look at pages 32-34 of the Maintenance and Service Guide.

  It has the hard drive part number and instructions to get the HDD and SSD.

  HP has continually enhances and modifies the components of the product. For complete information and up to date on
  supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
  Follow the on-screen instructions.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.  To simply say thank you, click the Thumbs up below!

  Thank you.

• Want TS 17 J140us: Laptop computer only supplies not on after adding 2nd HARD drive

  This laptop has an option for a 2nd HARD drive.

  I installed 2nd HARD drive and the laptop does not light.

  When I remove the 2nd HARD drive it is normal again.

  I'm guesing that a special BIOS change is needed to allow the reader to 2nd.

  Anyone know what is the solution?

  Thanks in advance for your help.

  dgtech

  Success!

  I think it was just plugging in the cable needed to be reinstalled.

  I confirmed that the drve was good with an external cable.

  I made the stop while holding down the SHIFT key.

  Once it did not work.

  Then I took out the cable and put it back making sure to he went in the port exactly how is HDD - 1.

  This time, he appeared in the windows Device Manager. I already made the partition, format, assign the drive letter.

  Everything is good to go now. I'm glad, that I have a lot of storage space on my laptop.

  Thanks for the suggestions, have a nice day.

  dgtech

• DV8-1200CTO does not recognize hard drive 2 TB

  Installed a new hard drive 2 TB. Time 8.1update Windows 64-bit and windows 7 ultimate 64-bit won't recognize the new drive. A disk initialized for mbr on another computer. Disk formatted and reinstalled on laptop. Windows disk management does not display the drive.

  In the second span? Maybe not. Even a notebook of 1.5 TB drive is probably advanced format. There is no other way to fit that amount of data on a 2.5-inch drive. I am frankly surprised that the 1 TB worked

• Installation of Windows no longer recognizes HARD drive

  I use a Toshiba M400 Tablet laptop.

  It came with windows vista business 32 bit.
  Shortly after I bought it (about two years ago) I installed buisness 64bits withuot a problem.
  I tried to install windows 7 RC on it, but does not recognize my hard drive install windows (it gives readers No problem Found).
  I (Hitachi HTS721080G9SA00) hard drive is SATA, and as I've already mentioned it worked perfectly on a previous instillation of windows - no drivers is through their website - they say that the drivers are included on the installation discs.
  I plugged the HARD drive on my desk and that you have installed 7 without problem, but as you can imagine when I put the HARD drive in my laptop it does not (blue screen on startup - modified hardware problem).
  Now, I have tried everything I have - business 32 bit, 64 bit, windows7 32 bit, 64 bit, none can find my HARD drive.
  My bios DOES not recognize my HARD drive and during mode diagnosis finds no errors.
  Can anyone help?

  Hello vurk,.

  Provide us with the exact error message and the error code (if any) and let us know the operating system currently installed on the laptop.

  The best measures possible I can think of without having the error message is:

  1) Perform Startup Repair

  To perform the Startup Repair:

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.
  If you have a Windows Vista installation disc:

  1. Insert the installation disc. 2. Restart your computer. Click the Start button, click the arrow next to the lock button, and then click restart. 3. If you are prompted, press any key to start Windows from the installation disc. Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings 4. Choose your language settings, and then click Next. 5. Click repair your computer. 6. Select the operating system you want to repair, and then click Next. 7. In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

       

  Startup Repair: frequently asked questions:

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx#ex

  1. In WinRE, open a command prompt. To do this, follow these steps:
  1. 1. On the Install Windows screen, select the language to install, time and currency formatand keyboard or input method options and then click Next.
     2. Click repair your computer.
     3. Click the Vista installation you want to repair, and then click Next.

        Note Click load drivers only if you need to load a driver to access a hard drive.

     4. Click command prompt.
  2. At the command prompt, type the following command and press ENTER:
     CHKDSK Player: / r
     
     Note In this command, drive is the drive where you want to install Windows Vista.

     Let us know if it helps.

     Thank you and best regards,
     Abdelouahab

• Drive problem hard dv8000 - does not recognize hard drives

  This is my first post, so please let me know if I did something wrong!

  OK, so the other day, I was working on my dv8000 when he walks just down. I turned it back and instead of properly start he told me that he could not find the operating system. Knowing that the machine was two disks in it, I swapped the primary with secondary school and always got the same result. Then, I went out and bought an external and attached drive Bay hard drive to my office. The disc was bad and kept cycling the heads. I have now bought a new HDD and the laptop is currently configured with the new disk into the main slot and the other original hard dirve I checked and it is good in the second slot. Here's my problem - when I go in the bios that the computer recognizes the two hard disks for boot options, but when I try to load XP from a cd to the laptop, it tells me that there is just no hard drives installed... What don't get me? I checked the disc for errors via the bios and the comeback test passed. I thought about formatting of readers but the bios doesn't have a format feature in what I can say. for all the intense and fine, the bios sees the readers, but the operating system does not work. Any ideas >

  Please help because this is my machine of the company and I can't keep borrowing my wifes laptop, she thinks I'm going to break this one too!

  Thank you.

  "When I try to load XP from a cd to the laptop, he tells me that there is just no hard drives installed... What missing am me?"

  Your cd does not necessarily include the required drivers. The original (MS detail) XP installation cd does not detect the SATA drives. Also some other readers can be detected, including the ATA/IDE standard. If you have your original factory CD, you could try this, it should work. You can try to install another operating system, for example. Ubuntu and see if these disk become visible.

• Windows 7 doesn't recognize hard drive

  I am building two new computers and purchased two licenses OEM Windows 7 Home Premium 64-bit. Two computers use a motherboard BioStar TA890GXB HD, AMD Phenom II X 6 1055 t. CPU, LG GH24 multi-optique player and 4 GB Kingston DDR3 1333 RAM. The first computer was a hard drive Maxtor STM3320620AS of recycling. It had recently been reformatted to NTFS, so essentially start over. The second computer was using a new hard drive Hitachi HD30500IDK.

  From the start of the first computer, I got the screen where I can choose which hard drive to install on, but none are listed. The BIOS is displayed correctly the hard drive. I tried to go to the Advanced section to load the drivers, but it can not find the drivers for the SATA controller. I then followed the advice I found for the search for a solution and I found how to get to the command line. I am able to go on the C: drive. I have re - format the C: drive. After it was over, I tried to go back and it still does not recognize the hard drives. After a while, I gave up and tried to work on the second computer.

  Start the second computer, I got to the screen to choose the hard drive and he identified the Hitachi HD. I managed to install the operating system and everything was exactly what I expected it to be.

  As stated, they are identical, except for the hard drives. I double checked all my connections several times on the first computer, but everything checks very well. It seems strange that I can access the hard disk in the command line and in the BIOS, but it does not recognize the Windows 7 Installer. Any advice in addition to go out and buy a new hard drive?

  How is the drive on your computer configuration, it is the first boot device or the secondary boot device?

  You can try to switch the jumpers around and make a slave and you optical drive master and see if she will be so recognized by Windows 7.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Satellite Pro A10 won't start HARD drive

  I have a Satellite Pro A10 that is not responding. If I have the connected HARD drive I get a ' insert System Disk... "message, I checked the HARD drive with a 2.5" USB connector in another computer and it seems OK.

  The laptop, I cannot change the boot order to select CD-Rom so that I can try the recovery disks. I can't get into the BIOS, but the Boot Priority option is not selectable.

  Any help appreciated.

  Especially this error message appears because the Middle starts not able.
  You insert a boot able CD?

  Try this: connect the computer laptop HARD drive to a USB adapter and try to format the whole HARD drive.
  Then put it in the laptop, insert the bootable CD and try to boot from the drive.
  As mentioned you could press the C button immediately after you start the laptop