Step by step Guide V27 DPS and Apple site

Similar Questions

• Steps and distance of duplication of the iphone and Apple Watch

  Hi, I would like to know how to disable back into shape and the movement for enforcement of health on my iphone affects the calculations of distance and stage of Apple Watch. IM turning off this option because I found his duplication my distance and steps. My Apple Watch will cease to use my iPhone's gps location?

  I know health app must analyze the data a prioritize my Apple Watch. Instead, his duplication in the info on my iphone and Apple Watch. Im not using third party applications. I do not fear the deactivation of the fitness and followed by my iphone only if my Apple Watch will receive my iphone gps information when I workout.

  Hello

  Health and fitness of the Apple Watch data, iPhone and all the other sources are grouped within the app to health on the iPhone, which allows to adjust the results to avoid any double counting of data from different sources.

  When several sources are available, the application of health uses a single data source for updating your consolidated data. This source is selected according to the order of priority that you set (or that was created automatically - for example, by default, rank devices Apple above sources third party).

• NB 100 and Windows 7, looking for drivers and step by step guide

  Hello everyone,

  IM thinking about to install Windows7 on my nb 100. But I have a question.

  1. How can I install the dvd version of windows 7 on my nb 100. This Microsoft tool is the right one?
  http://store.Microsoft.com/help/ISO-tool

  2. the Windows Recovery Cd will work, after I format the nb 100?

  3. where can I download the NB100 Windows 7 drivers?

  4. is there perhaps a step & step guide how to install windows 7 on nb 100?

  I would be grateful if you could help me

  Marco

  Hello

  (1) you can install Windows 7 using a Win 7 DVD or you can get an ISO file (image) and could create a bootable DVD or a USB bootable flash drive.
  The NB100 does not use an internal DVD drive. So if you do not want to install Win 7 from DVD then you have to buy an external USB CD/DVD drive. But you can also create a bootable USB key and might install Win 7 of this external USB.

  (2) Yes, it will work. The recovery disk to put the laptop in the same State as on the first day of purchase.

  (3) I think NB100 was created not for Win 7 because it is a netbook.
  Win 7 wouldn't go quite fast, of course, you could install it but the Win 7 needs a lot of material power and remedies like Vista and I guess NB100 is not supported these features powerful CPU or GPU.

  (4) I doubt that this teaching exists. I mean that the Win 7 drivers are not available for NB100. So, how to do an installation guide without no Win 7 drivers? But as mentioned above; You can install it by using the external drive. Win 7 drivers must be collected at your own hand.

• Can someone help me with a step by step guide to add a "clickTAG" button on board animate? I looked everywhere online and can't seem to find anything, thank you.

  Can someone help me with a step by step guide to add a "clickTAG" button on board animate? I looked everywhere online and can't seem to find anything, thank you.

  Here.

  Re: Admins we can get an ad platform-specific sticky for banners of edge?

• is there a step by step guide for Mozilla protection if my 5 year old daughter click on something that could be dangerous for her?

  I need to set up a login for my older daughter of 5 years on our computer, so she only has access to Mozilla, and once on Mozilla that she cannot access inappropriate Web sites. Is there a step by step guide for someone who has never done this before?

  My operating system is Windows 7

  Thank you very much for you help and guidance.

  Respectfully,.

  Derek Mr. Bond

  Hello Derek,
  I understand that you're concerned about your daughter and there is certainly a way to solve this problem.

  1) http://www.qustodio.com/
  This is a free parental control software that offers what you need

  (2) otherwise, you can also try this one: http://www1.k9webprotection.com/

  Best regards, G-Cloud.

• step by step guide to download from a DVD on USB

  step by step guide to download from a DVD on USB

  Hello

   
  You can try the following steps
   
  1. Insert your data DVD in a DVD player. Note: DVD must be a DVD-R or DVD - RW that was created for the storage of files. Cannot copy DVDs manufactured in series with videos or software on them.
  2. open the contents of the DVD by going to the 'Computer' utility and then double-clicking on the DVD. You should see all the data files
   
  3. connect your USB to the computer, and then open it in the same way that you opened your data DVD in the previous step.
   
  4. place the USB window and the disc data side by side. Then highlight the files that you want to copy by left-clicking with your mouse and then dragging the marquee on the icons of file you want.
   
  5 drag the icons highlighted in the window of data DVD to the USB drive window. A box appears stating that a file transfer is in progress. Once this window disappears, the file transfer is complete, and you can disconnect your USB and remove the DVD data disc tray.
   
  You can also try copying the data from the DVD, and then transfer to the USB key.

• Is there a step by step guide to transfer licenses?

  I have a PC that started getting the following message: "windows has detected a hard disk problem. " ‘ Backup your files immediately to prevent the loss of information and then communicate with the production of the computer to determine if you need to repair or replace the disk. " It is very I need a new hard drive and if it is sent to the manufacturer it will have to be re define probably provided the factory." I think I can lose some settings in the registry, etc.
  
  Since the purchase of the PC, I bought Adobe Design Premium, so if I end up with a new hard drive or even a new PC - how can I make sure that I can transfer the software without affecting the permit? Some discussions have conflicting info on disable or deactivate do not first - I would really appreciate a simple step by step guide - would be a good thing if Adobe could issue a permit too!

  Thank you very much in anticipation
  

  Help--> Deactivate in any of these applications now, then just instal software ogical on the new machine. If activation does not work, contact support to reset on the server side. Nothing is more necessary.

  Mylenium

• Cat stepped on the keyboard and on the small screen magnifying.  How do I turn it off.

  My cat stepped on my computer and looks like it has activated a small magnifying screen following my cursor.  How can I disable this thing?

  Open system preferences > Accesability > Zoom Style.  Set it to full SCREEN.

  

  Ciao.

• difference of initial value of string between the steps in the process and an external instance of LabWindows/CVI

  Hello

  I'm curious to know what I see using TestStand, LabWindows/2013 2013 with regard to initial in TestStand string values when you perform the steps in the process or an external instance of LabWindows/CVI.

  I have a step (CVI) string value that is used to check an array of characters stored in an EEPROM to test.  I pass on the Step.Result.String in the CVI by reference.  I then read the table charater of the EEPROM in the chain (Step.Result.String).  The string is then compared against the limit as specified in the test step breast.

  When I run this test step to perform the steps in the process selected in the popup Configuration of the adapter of LabWindows/CVI, it seems that the memory allocated for the string is filled with null characters.  Which is what I expected.

  When I run this test step to execute the steps in an external instance of LabWindows/CVI iselected of the Configuration of the adapter of LabWindows/CVI popup, it seems that the memory allocated for the string is filled with something else.  That is not what I expected.  For example what I see in the memory, it's the first characher is one byte NULL but the remaining bytes are some other values, as shown below:

  F0 00 AD BA 0D F0 AD BA 0D F0 AD BA 0D AD BA 0D AD BA 0D BA 0D AD F0 F0 F0
  F0 AD BA 0D F0 AD BA 0D F0 AD BA 0D F0 AD 0D AD BA 0D AD BA 0D F0 F0 F0 BA...

  In my code I make sure to write a null character in the following location table charater I just write in the chain so I have no problem with the test is working properly.  I have remove the writing from my code null character and was able to verity that the test passes when executing the steps in the process and fails during execution of the steps in an external instance of LabWindows/CVI.

  The returned string contains what I wrote for her, and then the rest of the string is filled with the values that are in the memory allocated for the string.

  Here's my Question: is this the expected behavior for the original string values in TestStand between both types of stage performances?

  Thank you

  Chris Young

  In general teststand not Initializes the unused portion of the string buffer, so it is expected that the values of the memory after character no endpoint will be different, or even to each call. If you happen to be get zeros after the null terminator which was probably due to random character (i.e. the memory allocated just arrived already having zeros in there) or perhaps a debug setting you use perhaps in the Visual C runtime (if you are debugging the process in visual studio or modify visual C runtime heap parameter). TestStand is not initializaing memory after the null terminator character in both cases (I checked the code).

  -Doug

• My cat stepped on my keyboard and the monitor on the side reoirented. How should I do?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: My cat stepped on my keyboard and reoriented the monitor on the side.  What key press sequence to fix it?

  You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hold down the CTRL + Alt keys and use the arrows to rotate back. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how do I

  After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how to leave it. ?  I try to install 14 items. Anita

  If present, click the ignore button and check.

  No button ignore? If possible, please post a screenshot of the error.

• I am a novice.  I need to know, STEP BY STEP, how to license and buy a picture.  Help, please!

  I am a novice.  I need to know, STEP BY STEP, how to license and buy a picture.  Help, please!

  1: search for your image

  2: click on an image you want

  3: click the link to the image in the license

  Really, that's all there is to it ;-)

• InDesign DPS and iTunes Connect: In - App Purchase will not appear

  Greetings Adobeans,

  first: I'm not a native speaker, so please forgive me my maybe English erronenous.

  My question / problem: the company I have a job publishes a multi-folio-tourguide-app. It is produced with InDesign DPS and the App Builder, published via Folio Producer and should now be sold on iTunes at the Apple iPad, so the publication process leads inevitably to iTunes Connect. We have already launched the multi-folio-app itself as well as a free leaflet as an in-app free and no consumables purchase. The application is now online, downloadable and our first folio works very well - even it stays "waiting for download... I think, the multi-folio-app tells iTunes Connect to get the producer of Folio data, but I don't know the exact details of this operation.

  The next step was to publish a second, in-app purchase price.

  Our efforts were (it might be useful for a solution, I guess):

  -publication of the folio in the producer of Folio (Status: Public - trade).

  -creation of an in-app purchase no consumables to iTunes Connect, using the same ID of product as the producer Folio, folio

  - and tell the download of an update for the entire application, because Apple and Adobe.

  But the folio never appeared in the app. It just the iTunes Connect-menu "Waiting for Upload", as our first, but it will not appear.

  My wisdom as a graphic designer came to an end a long time ago, Apple told us, that they look at these in-app purchases at all and we should ask Adobe for help... and well, aid Services Adobe sent me here.

  So, I would be extremely grateful for any help or lights.

  Greetings from the Germany,

  Der Bäcker Scholz

  You select and submit it?

  

• Auto unlock with Mac OS and Apple Watch

  I know that you need a Mac 2013 or later with Mac OS, a Apple Watch with watch OS 3 and two factor authentication (not two authentication step) to activate this feature, but for some reason, it does not appear in my system preferences.

  Any ideas?

  

  

  Greetings MetallicAsh,

  Thank you for using communities of Apple Support. It seems you want to unlock your Mac with your Apple Watch. Looks like you are already assured of a large number of parameters.
  I recommend reading this article, it explains what the parameters are still needed.
  
  

  Make sure that your devices are configured as follows:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID.
    On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password.
    On your iPhone, open the Apple Watch app, then type the access code.
  • Your Mac has "allow your Apple Watch unlock your Mac" selected in Security & Privacy preferences.
    Choose the Apple menu > System Preferences, click on Privacy & Security, then select the general tab.

  Automatically unlock your Mac with your Apple Watch - Apple Support

  Take care.