Stick model of configuration the same on many devices simultaneously
Hello
We have 100 + Cisco switches in our environment and we want to stick the radius server configuration model (which would be the same for all switches) on all switches. I would have a few automation rather than telnet in appliances one by one by one and paste the config. Is it possible to reach my goal?
ARO
Ramirez
A few solutions:
-Kiwi CatTools
http://www.kiwisyslog.com/Kiwi-CatTools-features-and-benefits/
-If you have Linux skills you could write a custom in rancid script to get configuration changes:
http://www.shrubbery.NET/rancid/
-You can write a custom in EEM script
http://forums.Cisco.com/eForum/servlet/EEM?page=main
Please do not forget to note all messages that are useful
Tags: Cisco Security
Similar Questions
-
This problem occurs on one of the workstations Dell 790 10. All the Dells are configured the same, and all have the same version of Wordperfect installed. It's the only workstation that will not print a document WP. MS Office 2010 products have no problem with printing on this machine. We have tried several things to solve the problem - reinstall WP, change compatibility mode, modify the user accounts on this computer, test printing documents of WP on other similar work positions (with no problems), etc. Any advice or assistance would be greatly appreciated. Really, we do not want to rebuild this box.
Thank you
Bill
Hi Bill,
Thanks for posting your query in Microsoft Community.
I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.
I suggest you try the steps from the following link:
000003546 - resolution of the printing problems with WordPerfect®
http://Corel.force.com/index/articles/en_US/Master_Article/754014-troubleshooting-printing-problems-with-WordPerfectImportant: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7
If the problem persists, then I suggest you to post in support of corel.
http://Corel.force.com/support?lang=en_USHope this information is helpful and let us know if you need more assistance. We will be happy to help.
-
I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.All the 4 sticks of RAM are the same brand and compatible with my motherboard.I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.I got a few BSOD - 0 x 00000109 - errors that I work.I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.These memtest errors concern the bars invisible RAM or the work those?Any ideas as to what should I do next?See you soon!Data sheet:
Windows 7 Home Premium 64-bit
Intel Core i7-3820 @ 3.6 GHz
ASUS P9X79
GeForce GTX 650
Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4Thanks Joel,
I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.So that's one mystery solved at least.I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.Thanks again.Nick -
Hello
I have adobe lightroom cc 2016 and I'm having the hardest time export photos, especially those where I use adjustment brushes and have look the same on all devices, my man book retna I will edit to look how I want, but for example when I look at the same image on the desktop mac dessu I can see all the adjustment brushes I used to darken
on the 2 pictures below
the first is what I see, its all uniformly dark and when I look on another device, according to me, which is depicted in the second photo
(I have more exposed the second to show what I mean)
I do not know what device who's going to be watching this post, but I hope you can help!
Thank you! don't know what to do
To ensure maximum viewing compatibility make sure you set the colorspace of the export in sRGB as below:
-
Is it possible to configure the same user for 500 systems that run under XP & Win7?
Hello
About 500 systems are run under Windows XP & Windows7, is it possible to use the same user for all 500 systems?
Hi SupportRI,
Windows Live family safety is no longer manages the accounts of children using Windows Live ID Windows Live ID on behalf of the child is essentially used for the feature of managing contacts (restrictions on the use of Hotmail and Messenger). Currently, parental control can manage Windows users; However, if you have already configured a Windows Live ID account before the update, it will be always available. You can see the thread below for more information.
Where is the function of the safety Contact family management?
If you intend to use Windows Live Family Safety for all users of 500 to restrict the Internet connection, please note that parental control does not restrict the Internet and Web sites. You also have the option in the list of content filtering Web to apply the rules to all users under the Family Safety.
For more information on how you can install Windows Live Family Safety, please visit the link below.
Protect your kids with parental controls
Thank you!
-
Configure the ACS 5.1 device to connect to the AD
Pls advise.
This is a new installation. I had to configure the ACS to connect to the ad to authenticate users and retrieve user information for the group as a result of step mapping.
Go to the users and identity stores > external identity stores > Active Directory and enter the domain name
appoint and give a name of user and password which will allow to connect to the domain. Then, click Test connection to validate join them the domain.
I got successful connection test. But when I click on save changes. I got error.
How has the problem been resolved?
Best regards
Boonkiat
It can be many things.
DCs how do you have in your area? They are all accessible by the ACS?
You return the SRV records for your ad?
-
BlackBerry Z30 two BBs bearing the same names of device
I had a Z10and I replaced it with a Z30. When I made the switch I saved the Z10 and then the Z30 and transferred all my data. address book, email, pictures, etc. In the process of link Blackberry gave my new Z30 the same device as the Z10 name. This wasn't a problem until a few weeks before when I reactivated the Z10 for my wife to use. Now they both have the same device name. How can I change one of them without screwing all the parameters, etc.
intrigued,
Pat
I assume that you mean the name you give the camera. And I guess that link assigns a name if you do not enter a unit. To consult me, look at settings > on > device name.
So, if I am followed, remove or delete the link Z10, change the name of the device and add it to the link with the new name.
In addition, if you do not, you should do a wipe of the Z10 security and implemented with BBID your wife. And be familiar with BlackBerry protect against theft, first of all, if it applies. http://support.BlackBerry.com/kb/articleDetail?ArticleNumber=000036737
-
1 model for all the links of pseudo-device
Hello group, this should be an easy question, but I'm stumpped for some reason any. While trying to keep my style sheet, organized and as small as possible, I want to have a style for all the events of a hyperlink in a specific. class. I thought I could do this by creating simply 1 style .class {a} and who would be the appearance of all the States of this hyperlink.
Basically I don't want my style sheet stretch downwards when having the same exact style for different binding events properties. I just have 1 style all States active, hover effects, etc., but I don't know how the style should look:
I tried and has some variants beside her, but nothing has done what I wanted.
. Class a: link: hover: visited: active: visited: hover {}
do-family: Arial, Helvetica, without serif.
do-size: 8pt;
color: #003366;
padding-top: 5px;
padding-right: 5px;
padding-bottom: 0px;
padding-left: 5px;
text-decoration: none;
}
Any help is greatly appreciated.This:
> .class a: link: hover: visited: active: visited: hover {}
must be:
. Class a: link, .class a: .class visited, a: hover, .class a: active {}
and providing your HTML looks like this:
-Darrel
-
If it does not mail patterns e, is Muse license model flexible enough to allow custom design ADJUSTABLE?
Reactive Adobe Muse CC 2015 is now online. Please install the update of CC > Apps.
What's new: news summary
Release notes: https://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html
Delicate design:
Adobe help Muse | Create responsive Web sites
Adobe help Muse | Responsive web design in Adobe Muse
Adobe help Muse | Migrate existing Adobe Muse Web sites to answer
Tutorials
To get started with Adobe Muse (replaces how to make a website with Adobe Muse (coffee of Katie)):
- https://helpx.adobe.com/muse/how-to/create-responsive-website.html
Create a sensitive webpage with Adobe Muse:
- https://helpx.adobe.com/muse/how-to/responsive-web-design.html (more detailed features RWD of Muse demo)
Thank you
Sanjit
-
How to map the same tag of the element with a different value in BI Publisher rtf model.
Hello
I have an xml file with the same name in the < tag > element and I do not know how to associate the same < tag > element to different string in the document rtf template attribute.
For example: "' Eswitch <number > is repeated in this xml file, when I am mapping this element to the document rtf with a different string, I have same value 'D00002 ' . I should get values D00002 and DMR00002.
< document >
< TitleBlock >
< number > D00002 < / number >
< itemType > Document < / itemType >
< lifecyclePhase > preliminary < / lifecyclePhase >
< description > gtedgg < / description >
< shippableItem > n < / shippableItem > < / cartridge > < / Document >
< DMR >
< TitleBlock >
< number > DMR00002 < / number >
< itemType > DMR < / itemType >
< lifecyclePhase > preliminary < / lifecyclePhase >
test nomenclature model bom1 < description > < / description >
< POS > < value > Test < / value > < / POS >
< shippableItem > n < / shippableItem > < / cartridge > < / DMR >
< / AgileData >
I followed steps below for map document model rtf with the same tag xml with a different value.
1. install Office word 2013.
2 BI Publisher for desktop software installed. It will add a BI Publisher plugin to the word document.
3. with the help of desktop publisher BI, created a model of document rtf file.
4 imported the document rtf template example xml file.
The data is loaded successfully.
5 tires model rtf field symbol to map the tags to xml to rtf document attributes element.
7 saved the document in PDF format.
Thank you
Please mark it correct so that it is useful for others to find the solution to a similar request.
-
Error of tunneling traffic to 2 networks on the same link?
Hi all
Here is my list of current access to bring up my VPN tunnel. Everything works fine with it, but I have several networks from the source router. How to encrypt traffic from the same source router going to the same router by peers. Do I have to create a different ACL or can just add another license to the current ACL statement?
INT_Traffic extended IP access list
IP address 172.16.0.0 allow 0.0.255.255 172.17.0.0 0.0.255.255Can I change the ACL above to this? Every time I add the second permit States below, I get the error below.
INT_Traffic extended IP access list
IP address 172.16.0.0 allow 0.0.255.255 172.17.0.0 0.0.255.255ip permit 172.30.3.0 0.0.0.255 172.30.3.0 ip 0.0.255 or permit 172.16.0.0 0.0.255.255 172.30.4.0 0.0.0.255
peer networks peer Destination source.
Mar 1 04:18:29.842: IPSEC (sa_request):,.
(Eng. msg key.) Local OUTGOING = 192.168.0.1, 192.168.0.2 = distance.
local_proxy = 172.16.0.0/255.255.0.0/0/0 (type = 4),
remote_proxy = 172.30.4.0/255.255.255.0/0/0 (type = 4),
Protocol = ESP, transform = esp - aes 256 esp-sha-hmac (Tunnel),
lifedur = 3600 s and KB 4608000,
SPI = 0 x 0 (0), id_conn = 0, keysize = 256, flags = 0 x 0
* 04:18:29.850 Mar 1: ISAKMP: set new node 0 to QM_IDLE
* 04:18:29.850 Mar 1: ITS a exceptional applications (102.72.38.92 local port 500, 102.72.38.64 remote port 500)
* 1 Mar 04:18:29.854: ISAKMP: (1001): sitting IDLE. From QM immediately (QM_IDLE)
R2(config-ext-NaCl) #.
* 04:18:29.854 Mar 1: ISAKMP: (1001): start Quick Mode Exchange, M - ID of 623193098
* 04:18:29.858 Mar 1: ISAKMP: (1001): initiator QM gets spi
* 1 Mar 04:18:29.862: ISAKMP: (1001): send package to 192.168.0.2 my_port 500 peer_port 500 (I) QM_IDLE
* 04:18:29.862 Mar 1: ISAKMP: (1001): sending a packet IPv4 IKE.
* 04:18:29.866 Mar 1: ISAKMP: (1001): entrance, node-623193098 = IKE_MESG_INTERNAL, IKE_INIT_QM
* 04:18:29.866 Mar 1: ISAKMP: (1001): former State = new State IKE_QM_READY = IKE_QM_I_QM1
* 04:18:30.422 Mar 1: ISAKMP (0:1001): received packet of 192.168.0.2 dport 500 sport Global 500 (I) QM_IDLE
* 04:18:30.426 Mar 1: ISAKMP: node set-1733728027 to QM_IDLE
* 1 Mar 04:18:30.430: ISAKMP: (1001): HASH payload processing. Message ID =-1733728027
* 1 Mar 04:18:30.430: ISAKMP: (1001): treatment protocol NOTIFIER PROPOSAL_NOT_CHOSEN 3
SPI 2018370628, message ID =-1733728027, his 664824F8 =
* 1 Mar 04:18:30.434: ISAKMP: (1001): delete message spi 2018370628
R2 (config-ext-nacl) #ID =-623193098
* 04:18:30.434 Mar 1: ISAKMP: (1001): node-623193098 error suppression REAL reason "remove larval.
* 04:18:30.434 Mar 1: ISAKMP: (1001): node-1733728027 error suppression FALSE reason 'informational (en) State 1.
* 04:18:30.438 Mar 1: ISAKMP: (1001): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
* 04:18:30.438 Mar 1: ISAKMP: (1001): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETEhostname R2
!
boot-start-marker
boot-end-marker
!
!
No aaa new-model
memory iomem size 5
IP cef
!
!
!
!
no ip domain search
property intellectual auth-proxy max-nodata-& 3
property intellectual admission max-nodata-& 3
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Archives
The config log
hidekeys
!
!
crypto ISAKMP policy 50
BA aes 256
preshared authentication
Group 5
key cisco address 192.168.0.2 crypto ISAKMP xauth No.
!
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac Cisco
!
VPN_MAP 10 ipsec-isakmp crypto map
defined peer 192.168.0.2
game of transformation-Cisco
match address INT_Traffic
!
!
!
!
!
!
!
interface FastEthernet0/0
IP 172.16.0.2 255.255.255.252
automatic duplex
automatic speed
!
interface Serial0/0
the IP 192.168.0.1 255.255.255.252
clock speed of 128000
card crypto VPN_MAP
!
interface FastEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
interface Serial0/1
no ip address
Shutdown
2000000 clock frequency
!
router RIP
version 2
network 172.16.0.0
network 192.168.0.0
No Auto-resume
!
IP forward-Protocol ND
!
!
IP http server
no ip http secure server
!
INT_Traffic extended IP access list
IP address 172.16.0.0 allow 0.0.255.255 172.17.0.0 0.0.255.255
IP address 172.16.0.0 allow 0.0.255.255 172.30.4.0 0.0.0.255
!
!
!
!
!
!
!
control plan
!
!
!
!
!
!
!
!
!
!
Line con 0
exec-timeout 0 0
Synchronous recording
line to 0
line vty 0 4
opening of session
!
!
endR2 #.
(1) you can not configure the same subnet for the subnet source and destination. Each end of the VPN must be unique. Therefore, you cannot add "ip 172.30.3.0 allow 0.0.0.255 172.30.3.0 0.0.255" to the ACL INT_Traffic.
(2) If you add another row of ACL under INT_Traffic, you also add the same image mirror ACL on the VPN peer device. You can not simply add the ACL on the router, because the other router wouldn't know the newly created ACL, so this will not work.
You can add the following line under INT_Traffic ACL:
IP address 172.16.0.0 allow 0.0.255.255 172.30.4.0 0.0.0.255
But you must also add the image mirror ACL on the device VPN peer as follows:
IP 172.30.4.0 allow 0.0.0.255 172.16.0.0 0.0.255.255
But, Yes, you can add several lines ACL under INT_Traffic if you want to encrypt via the VPN tunnel. Just make sure that the 2 points above.
Hope that helps.
-
using a different material of the same type
Hello
I wrote a code in LabVIEW and data acquisition that I pointed out where the signal will be sent to the and where it will make the acquisition of. I use USB6009.
It turns out that when you use a different USB6009 the program will not work because it has a few other serial numbers. I need to configure the program for EACH DEVICE no matter if the appliance is of the same type?
How about exe? Suppose I want to send a package to someone away who has same device type but of course physically different?
(this is a basic type question but I'm always hard to find answers to my questions generally find manuals and materials to get a good point of departure-> a novice can really get lost)
-
Use the same system recovery disk?
I have exactly the same - HP Pavilion dv6406nr 2 laptops. I ordered the system recovery disk for one, several months ago. Can I use the same disk or do I have to order one especially for the 2nd laptop?
Yes, they will work, if the model numbers are the same.
.
-
Download error - why don't we have several files with the same name?
Since the upgrade to 2015.1 a couple of days, I can't update my site using the feature "only changed files. If I do I get this error, followed by the Muse stops completely.
If I change the upload to 'all files and folders' everything is wonderful, even if it takes an hour to update the entire site rather than the usual 10 minutes. Given that it will only grow of it is I hope it is on the radar of the Adobe + 400 current pages team. What should I do?
Well, I got the error to stop on my own. I downloaded several times with a full scale 'all files' downloading and finally opened the site on my iMac to perform the update it. Same configuration, the same file, even software - after uploading each file one last time on the other machine I can now do a upload "only changed files" to be.
What the hell was that?
-
List of relational models available when the design is open is not true
I use DM 3.3.0.747 and I have a design with 11 relationship models (without logic models) and I'm using version control.
Each relational model has been added, the after another, using the 'import of data dictionary' and then added/committed to svn.
After it was created 11 models, I save and closed the project.
But now when the design file is reopened, the screen "Selectionner select relational models, shows only 7 of 11 models.
Models that do not appear in this list are open regardless of what is selected.
Thus, all relational models are in the project, but it's like the 'Pseudo-index"used by the splash screen when the design is open is obsolete.
The only way to fix it was save as project in another empty folder, but of workaround does not resolve the problem in the folder where the files are versioned.
Suggestions of what might happen, and how I can fix?
He would not re - import the SVN project and tomorrow, when I need to add a new model to get the same problem because I did, and that's what happened again.
Thank you!Hello
You must delete the file dmd_open.xml in the directory of the design. There is a bug and this need to file should be deleted after adding new model relational.
Philippe
Maybe you are looking for
-
I am trying to upload music from my PC to my phone. Any simple way to do this? Did some research online, tried several different ways, need step by step instructions. Thanks for any advice you have.
-
Activation Win Pro 8.1 after formatting drive
Hello We bought HP ProDesk 600 G1, with Win 8.1 Pro license. Users are complaining about slow work, so we've updated with graphics of HP Quadro K200 and SSD. Cloning of Windows OS to SSD disk did not work on, I freshly installed Windows Pro 8.1 on SS
-
Original title: the status message appears on the start page. Message that appears at startup to the top: the component you are trying to use is on a network containing the installation package "status.msi" in the box below. Click OK to try again or
-
Can not remove fonts - application for leave to administrator in Windows Vista
Original title: why did Windows not recognize me as an admin even if I am the only user and 'Administrator' is even named right after my name? I'm having this problem on this Vista laptop that I am now on and on my desktop which has been upgraded to
-
Challenge of Vista with Panasonic VideoCam Suite 2.0
Software of the SDRS26 of my new camcorder Panasonic "VideoCam Suite 2.0" publishes an error during the installation/download tip 62 OS is not supported. The camera shop said that VC Suite Panasonic 2.0 editing software is not supported by Vista. T