Configure the ACS 5.1 device to connect to the AD

Similar Questions

• Qosmio G50-12 q - how to configure the devices connected to the USB mode standby

  Hello

  I wanted to use the PC sleep function.
  I also wanted to as devices that have been extinguished when in stand by.

  Once implemented this function the PC will regularly stand-by, but the device connected by usb are set on fire, any other master type, a device a usb wi.fi, etc.

  Someone told me that maybe some functions in the Bios only are not put in place to do that once entered the booth by the PC off all devices those connected.

  What checks and I have to perform in the configuration PC bios?

  How we in the bios? By pressing the keys on which?

  Thank you

  * valkyrie @ *.

  Please post comments if workaround posted by Akuma helped!

  It would be really appreciated.

• Adding a device:-201401. Make sure that the device is connected?

  I was able to set up my Explorer Measurement & Automation to detect my device (NI cDAQ-9188), but I'm unable to add the device.  The error statement says:

  Add the device failed.  From the device driver error report is as follows:

  Add a device

  -201401

  Recovery of the properties of the network device failed.  Make sure that the device is connected.

  How can I fix this so that I can test my modules e/s?

  DAQmx version: 9.7.5

  Operating system: Windows 7 64-bit

  Initially:

  In the tab network adapters, it reads:

  -No network adapters found

  In the tab of the firmware, it reads:

  -firmware version: 1.1.0f0

  Based on the status of the network configuration tab, I assumed that my problem was related to the network connection.  I have reset my network cards and this seemed to solve my problem.  Thanks for your help.

• Can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.

  I want to use a USB device to connect to the Internet, as my ethernet card is US I can not configure the Ralink dongle and I am referred to in article 871122 on the Microsoft site to activate zero wireless connections.  How to do this please?

  USB to the Internet connection.

  Hello

  It seems that your dongle is not installed properly. try to uninstall and reinstall the software dongle...

• Windows Explorer in Windows 7 restart when the storage device is connected

  Well actually, I have Windows 7 Professional running on my netbook and every time I connect a mass storage device (for example, my phone, external Hard Drive etc), Windows Explorer keeps restarting.

  I have MSE running, and there is no virus in it.

  Anyone can do more about this light? / Thank you

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        You are able to access the data in the device of storage without any problem?

  Follow the steps mentioned below.

   

  Step 1:

  I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the boot options.

  b. Select safe mode from the menu and press ENTER.

  For more information, see the article mentioned below.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  Perform a clean boot and see if the problem is resolved.

  Follow the steps mentioned in the article given below to configure the system to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Step 3:

  I suggest you to scan your system for viruses and malware using a care Microsoft and Microsoft security essentials. Check the links below.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/security_essentials/

  If you think that it is a file that is infected, then I suggest you to quarantine or delete it from the system.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Configuring the ACS server on windows server

  Hello

  I started to prepare my CCNA security and tried to configure AAA using ACS 4.2 on windows server 2003.

  I have configured the router to use the AAA authentication with the laboratory of cbtnuggets from ACS server.

  I checked the accessibility of the ACS server to client router and vice versa and also configuration.

  The problem is I'm not able to authenticate using ACS server, the router uses local authentication and I have no why the router communicates not eith ACS server.

  Help PLZ.

  Configuration of my router from AAA.

  ===============================================

  AAA new-model
  !
  !
  AAA authentication login default group Ganymede + local
  exact AAA authentication login group Ganymede + local
  AAA authorization exec default local

  RADIUS-server host 192.168.1.25 single-connection key ciscoacs--> (192.168.1.25 ACS, the key configured on the ACS server server is also ciscoacs)

  line vty 0 4
  exact connection authentication

  ================================================

  I created a user on ACS server and I believe that when I'm trying to telnet to the router I should use the user name and password configured on the ACS server.

  When I try to use, authentication fails, and also if the router accepts locallly configured user details then I think there was no communication between the router and the other GANYMEDE ACS server + will be used for authentication and if no communication between the router and acs server then only it should be the responsibility of local user

  Please help me.

  reports and activity--> passed authentication

  reports and activity--> failed attempts

  Rating of useful answers is more useful to say "thank you".

• Try to use the feature in Microsoft Streets and Trips GPS, but when my Garmin connection, get an error "device not connected"

  I'm trying to use the GPS feature in Microsoft streets & trips 2011. I connect my Garmin nüvi 40 to a USB port and it says "device not connected" when I click on Configure GPS. The USB ports on my work computer and I connect the GPS and use it to download/download photos and today I updated maps of garmin.com. It was no problem. However, Microsoft streets & trips 2011 is unable to see the GPS device no matter which USB port I use.

  Anyone know anything about this?

  Any suggestions would be helpful

  Thomas

  Hello

  I would recommend posting your query in the forums of Microsoft streets & trips.

  http://social.Microsoft.com/forums/en-AU/streetsandtrips/threads

  See also:

  Troubleshooting Garmin, DeLorme or other third-party devices with Streets & Trips, MapPoint, or highway

  http://support.Microsoft.com/kb/952607

• How to configure the network device agent

  I added a network device (router) in the new platform, its not to go for all of the alerts in tool Hyperic. How to configure the network device to get information to the Hyperic server. Do we need to do any configuration of SNMP.
  
  Can someone help me please.

  Hi Cyndhya,

  Do you mean you want to see traps SNMP generated by your device network at HQ? To do this, you need to configure one of the agent HQ to receive traps and configure the network device to send the trap to the agent. Once this operation is complete, you should be able to add the device network platform (you must use the agent HQ for the monitoring network device connection).

  Here is the step by step guide:
  http://support.Hyperic.com/display/DOCSHQ30/agent+SNMP+trap+receiver

  Koffi

• Try to configure the usb connections

  Try to configure usb connections:

  I have the version of VMWare Server 1.0.9 156507 installed on a laptop with Wndows XP with the latest service pack installed.  The guest operating system is Vista.

  I cannot see a drive hard usb attached to the laptop.

  VMWare Server help - setting up a USB Port, says I have to select to configure the port of the USP.  There is NOT point in the list, however.  Also, when I select VM & gt; Removable devices, there is nothing there.

  I think that will all users, that would be very plug-and-play at this point.  This has proved to be a frustrating problem.  Any help with this would be greatly appreciated.

  ... There are no. USB controller in the list article, however.  Also, when I select VM > Removable Devices, there's nothing there.

  You must Add a USB controller to the parameters of the virtual machine.  Shut down the virtual machine.  (Not hang).  Then add a USB controller to the virtual machine.

  Note that only supported Server1 USB1.  There were many reports of devices USB2 works do not correctly with Server1.  For more details, see problems using some devices in a Virtual Machine (774) .  Basically, for these instances, you must either disable the USB2 support in the guest OS or use a USB1 hub to slow the USB device.

• Tecra S1: How to configure the connection of modem to dial upward

  Hi all

  Would someone be able to help me how I should configure the modem connection to dial upward, I tried to do it through the connection of the Wizard but it does not dial a number and I have no idea what could be the problem.

  Would be very grateful for help.
  Thanks, Nathan

  Hello

  Do you get any error messages?
  The Connection Wizard is very simple and I don t know what you could do wrong during the installation procedure.

  Hmmm please check the option in the properties of the modem so wait for dial tone before dialing is not checked.
  If everything is ok, try to create switched again and ensure that all parameters are good. Just test everything again.

• On the screen that it says "the proxy server refuses connections" Firefox is configured to use a proxy server refusing connections. The result is no internet.

  the proxy server refuses connections"Firefox is configured to use a proxy server refusing connections. The result is no internet

  You are welcome

• I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

  I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

  Windows: Tools > Options > advanced > network > settings
  OSX: Firefox > Preferences > advanced > network > settings
  Linux: edition > Preferences > advanced > network > settings
  Set your settings to connect to the 'No proxy', if you are not using a proxy.

  Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

• Check if the device is connected

  Hello

  I'm developing an application where the use cDAQ-9174 with modules OR 9401, NI 9205 and NI 9219. I remember the last State, including the setting of the device in the xml file, and channels last parameter is loaded when the application starts. I would like to indicate in the front of TOP VI that the cDAQ and the modules are connected. Let's say by LED commissioning. Y at - there no way how to check if the device is connected by programming?

  Here's how you can check a connected device.

  

• How do I configure the bluetooth device

  Original title: pls help bluetooth & windows XP

  so brought of speakers of wi - fi creative d80 to my pc. I tried to activate bluetooth in downloading drivers. is it true that you can not bluetooth windows xp?

  Hello

  Thanks for posting in Microsoft Community

  I appreciate that you try to configure the Bluetooth device in Windows XP.

  I will definitely help you with this.

  Please follow the steps in the link.

  How to install and configure Bluetooth devices in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883259?WA=wsignin1.0

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.