Still and CC PP

Similar Questions

• Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  Recently introduced an iPhone out of someone and the access code is still and I do not know Apple ID them and I can not get on the phone and do not have access to a computer so what do I do?

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• How to import Final Cut Pro video in still and still get the chapter markers?

  I want to burn a DVD of a Final Cut Pro video.  How can I import in again and still get the chapter markers?

  I imported as a timeline, but the chapter markers do not show

  You also try and put a candle Chevy in a Ford engine?

  As far as I know, there is no interoperability between still (and program from Adobe) and FCP (Apple program)

• His grave suddenly on a DVD player, but in the first, still and WM Player

  Hello

  The sound on the DVD I burned in still suddenly falls to almost inaudible--but only when played on a DVD player! The problem does not occur on a computer (well in the first, still and DVD sounds good on all players like windows media, real player, etc.).

  Drop noise happens in the same place, about 40 seconds in the 1/2 hour video. Then, the sound blasts at full volume for the end credits I inspected the 2 audio tracks in the first and track volumes do not change, nor my knots of volume control in the securities themselves explain the problem.

  Why it would sound good in all applications on a computer, but not on a DVD player... and why the first 40 seconds would sound good on the DVD player?

  I could hear volume of 'regular' dialogue in the left and much softer, but not absent, in the right. I can't guarantee this isn't an artifact on this end.

  I think you have solved the audio problem at first. Looks like you have a stereo audio track from a source who had a microphone in a single channel. Instead of panning, "fill right" (or left, I always have to check myself on this) so that you get the dialogue on both sides.

  I don't think that you dismissed a phase problem. But I suspect that when solve you the problem of the track, your audio will be correct.

• Problem of transition on the stills and titles

  First Pro 1.5

  1 H 52 Min finished video SD

  Videos content SD DV, same settings, same camera, same soundtracks

  All stills max 480 or 720 max with a black layer video below

  All the titles in PP1.5

  Many pieces of music with audio clips native

  Everything went great, all transitions, the stills and the titles look good in the timeline panel. Everything looks good in the single file avi export of PP1.5 as played with windows media.

  As soon as I import the avi in 1.5 still to the author of the DVD, a few transitions between still images or titles get blurred. It happens about 3 random transitions on maybe 50-100 of them. Sometimes a (fade) transition effect is involved, there is sometimes no effect. An example is 2 stills or adjacent titles to each other with the same duration. After the import still watering durations and the second yet or title flashes for less than a second.

  Any ideas? Other than this problem this long and complex video is flawless.

  Thank you

  George

  It is an old chestnut, but only if your version of reminder is lower than CS3.  Uncheck the "Optimize images" in the first sequence (project?) settings and export settings.  Then re-export your first timeline.  Make sure you save it under a different name than the existing exported .avi file.

  -Jeff

  EDIT: In the project settings, optimize stills is the tab of keyframe and rendering.  Ditto for the export parameters.

• Still and transcoding

  I have a few questions about using still to do BluRay discs (Macbook Pro, OS Mavericks). If anyone has answers or ideas, thanks in advance! One question is, I created a project Bluray about a month ago and now I need to burn a bit more BluRay discs. But the project shows not transcoded media. It took more than 24 hours to transcode media (last month), so try to avoid that now. Where the encoding does not store the transcoded files? I looked in the file cache (for this project) and in my library folder (Application Support/Adobe/common), but I can't find anything that resembles transcoded files. And I don't see a way to recreate a link to the transcoded files.

  The second question: I initially transcoded my BluRay files in Apple Compressor, but when I imported these files to encode, they have been marked as non-transcoded. So, I finished the original ProRes file import and leaving again to do the transcoding (which as mentioned above, has been more than 24 hours). But I wonder, why still does not read BluRay as transcoded speced files?

  Thanks again for any help, Alice

  Hi Alice,.

  Is it possible that after burning this first Blu - ray, maybe you didn't SAVE before closing again? Don't know what else he would like to redo the rendering if changed nothing in the build. But like John, I always export it as an IMAGE (.iso file) and then I have my copy of the disc saved on the hard drive.

  Thank you

  The f

• Still and first purchase

  Hello, I want to buy Adobe Premiere and again, how and where? I read somewhere that still is no longer available?

  Once buy Creative Suite 6

  Creative Cloud subscription price and membership plans | Adobe Creative Cloud

  NOTE: If you purchase a subscription of cloud, there are additional steps needed to download and use again... that will stop working if you cancel your subscription

  -More instructions http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html for a subscription

• PC slows to stand still and needs to be restarted

  My PC works normally for about an hour, then it slows down to a possible status quo.  I have to restart to make it back to speed, once again for about an hour.  I tried a F10 recovery at first upward and get an error message "Stop: c0000218 {Registry file failure} the registry cannot load the hive (file): \systemroot\sysstem32\config\securt or its alternative ofr journal.»  It is damaged, missing, or not accessible in writing.  I tried the recovery F10 with the recovery CD and received the same error message.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

• Help with 3.5 hour, 2 video disc with still and Premiere Pro CS6?

  I need to publish a DVD 2 disc set (with menus on both discs), because the final length video in Premiere Pro CS6 is about 3.5 hours. In the past I just sent my large video file to an editor, and they put my file on 2 discs. But now I'll be self-publishing and the need to know what is the best way to create my DVD. I have Encore CS6, but cannot find a way step over the images between two discs. What do I have to split the video into Premiere Pro, then send it to yet? Or export the file in full size/resolution of the PP and it is separated into yet?

  And what settings should I use in PP and yet?

  BTW, I'm on Windows 10, so I don't know if I need Quicktime to DVD (cannot install on Windows 10). Thank you!

  Option B WINS.

  What is the length of the program? Don't forget to use 560/minutes or a bitrate calc to fill as many disks as you can for a better quality, no sense given the empty space (unless the program is less than an hour, then it is inevitable).

  Thank you

  Jeff

• Still and surround sound 5.1

  I just finished a project in adobe cs6 first pro and the dynamic link to create a dvd in Encore. The project was carefully mixed in 5.1 surround, but the DVD is released in stereo. I can't figure out what I did wrong. Someone out there who can help? Thank you!

  Brent D

  You cannot use dynamic link with material 5.1. You need a dolby AC3 digital file in the first use of the Surcode encoder and an Mpeg video file. These you can then bring in yet.

• Still and Premiere Pro

  OK, first time with Dynamic Link of the PrP in yet. I burned a DVD and now a few questions. It is a DVD of 11 minutes with no chapters (just from the beginning to the end). It looked very good! (Very good quality).

  1. I now want to make a change or two in first and have effective in yet--just make the change in the first, or what?

  2. I have a menu, but it appears at the beginning of the year - once it is played once. How can I configure it so that it shows at the beginning and go back to the menu at the end?

  3. I don't think that the "end" or "Timeline" is correct, but have no idea how. (I can't help here too useful menu, although I tried to solve it myself). Suggestions?

  4 is there any point in affecting more than 192 to Audio bitrate? I put it to max, 448.

  Thank you

  KDOC

  To TO set the menu in the first game and the end of your movie action. Check this box of the chart.

• How can I remove the cs6 first and still keep for use in CC?

  I'm running a PC with CC.  I had to CS6 first so I can use again to an older project.  How can I remove the CS6 first and keep still (and all CC downloads)?

  Thanks for the help.

  Todd

  In the original version (traditional uninstall), you are given a screen that lets you choose what to uninstall, and then you clear again (if there). If you do not have this option, and then try to uninstall in Windows via Control Panel.

  I just tested and it gives you the screen.

• Whereas the first Pro CC and still

  Hello

  I think buying the first Pro CC but really need to be able to still as I have clients that require more DVDs and Blu - Ray discs. Can someone help me with power out that too please.

  The only way I've seen to do via the download selection CS6 first doesn't seem to be available to me.

  Help.

  Thanks Mark

  When you have a paid first Pro CC subscription, you can install Premiere Pro CS6 and group reminder

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number

  -a of notes on different versions of cloud and step by step on these differences

  -contains information about the separate library download which is necessary

  -CS6 is the last reminder, see here #8 why http://forums.adobe.com/thread/1337952?tstart=0

  Still and 10 Windows https://forums.adobe.com/thread/2015461 use the compatibility mode of Windows 8

  problem/solution to install Encore CS6 https://forums.adobe.com/thread/1934087

• several imported still images (how to change "timing" AND make multiple transitions)

  I imported into project still many pictures resources.  The default for each time seems to be 5.1 seconds.  If I drag them in the timeline, select them all and change the duration, there are gaps between the images... How can I scrunch together easily, OR how change the default duration before I drag them in the timeline?

  Second... If I have all my photos on a timeline can I set the effect of transition on more than two at a time?  I can't put the transition for all of them at once (a different query)

  Thank you, - bill

  I imported into project still many pictures resources.  The default for each time seems to be 5.1 seconds.  If I drag them in the timeline, select them all and change the duration, there are gaps between the images... How can I scrunch together easily, OR how change the default duration before I drag them in the timeline?

  When you have selected your still and used the command of speed/duration, do not forget to check the option 'Edit Ripple, Shifting trailing Clips' in Control Panel. That will remove any empty what space between clips that would be otherwise generated to reduce the duration of your sequences.

  Second... If I have all my photos on a timeline can I set the effect of transition on more than two at a time?  I can't put the transition for all of them at once (a different query)

  Yes, although there are two preliminary steps. First of all, in the effect controls panel, click the button of the flyout (this stack of pancakes with the little downward arrow) or go in Edition > Preferences > general and select the default Transition duration option and change to the desired option. Secondly, in the effect controls panel, select the transition you want and right click and select "Set selected as Default Transition".

  Now, select your clips/still images in the timeline panel and go to the sequence > apply Transitions to the selection by default; the passage you have just configured will apply to all of your clips. Note that, by default, this will add audio transitions as well, if you use combined video/audio clips (probably not a problem in your case that you use still images), but you can hold down the ALT key to select just the video or only the portions audio your clips, if you want only a single transition type or the other. You can also temporarily block tracks where you don't want transitions before using the command.

  Also, given that you work with still images, you don't have to worry about the handles; If you import a still in the first, even if it lasts only a single image, you have an indefinite/infinite amount of images to use for editing and transition. Audio/video clips are a different story, of course...

• Firefox hangs the start of solange and cannot send accident report

  Last night I was browsing the web and ended up having 300 + tabs open, FIrefox started to slow down a lot and no longer meets a couple of times. At the opportunity to close Firefox from the pop up window and choose to close Firefox, unfortunately when I tried to open Firefox again, he crashed and gave me the crash reporter and when I tried to present the report he has encountered a problem and may not send the report. I start Firefox in safe mode and works fine but when I try to restart its crashes with disabled modules still and unable to send the report.

  If you can start Firefox in Safe Mode by holding down the shift/Options button then you can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration