Still holding image stabilization!

Similar Questions

• Image stabilization (still images) are no longer available on the camera 2.0?

  Can't seem to find him after the update, and other users have also reported the same. Why it was deleted?

  Or does that mean that there is no need for default, the Z5 already has a mechanism of stabilization (closed loop actuator) hardware implemented?

  Someone from Sony can confirm?

  There is no option for the stabilizer of image for photos in the new user interface of the camera application. Instead, the image stabilizer is always on.

• 18-55mm of an old XTi lens: need to upgrade for image stabilization?

  I have a lens EFS 18-55 m supplied with an old Canon Rebel XTi (from 2006?) I'm looking to upgrade to a new body, but I don't know if I have to / should upgrade the goal too.

  My main concern is this old lens has image stabilization, or if the new lenses are much better image stabilization (enough to justify an upgrade to a new lens.) Anyone know?

  Thanks in advance!

  The reason IS is valuable on this focal length is, it is so slow that anyone holding going to need all the help they can get.  They are OK for light of day but go inside and a slow lens needs help.

  I would buy the new version of the EF-S 18-55mm STM with IS.  Especially in the kit as it is a good deal.  Not only a goal faster when we focus, the optics are better, too.

• Camileo S10 camera does not remember the setting of the image stabilizer

  Hello reader Forum,.

  Is it normal that my Camileo S10 camera does not remember setting image stabilizer?
  I use mostly the 720px setting and stabilizing on but after that the camera is off the stabilizer is off again.

  Greetzz... Ben

  Hello

  This could be possible.
  I remember that the focus does not work if the stabilization has been activated
  So maybe it of the intent of the manufacturer that the stabilizer would be disabled again.

  Welcome them

• XA - 25 Image stabilization

  Is it possible to have the image on all the time stabilization.  I use Powered IS.  I have the camera on a tripod at the top of a long vertical column.  On high zoom just shoots touch stirs the camera image.  It's great when IS turned on, wish it could always be on.  Is this possible?

  Thanks for any help.

  Don

  Hi dedxa25 and VideoGeek.

  Thanks to all of you for posting.

  After a period of time without motion detection, Image Stabilizer will stop.  There isn't a way, I can find which affect permanently the Image Stabilizer to.  Since I use the powers Powered IS the Image Stabilizer for a short, but long enough time to make the transition, you can use the assigned button, that you have set to power the EAST just before removing the camcorder tripod.

• My sliders in CC are very slow and not even sliding at all still holding show my setting. And my crop is also slow and freezes even what I do!

  My sliders are very slow and not even sliding at all still holding show my setting. And my crop is also slow and freezes even what I do, I need help it is too slow to change this way!

  Hi lakenm,

  Please turn off the GPU in the Lightroom preferences

  Steps to follow:

  Go to preferences

  Click the performance tab

  Uncheck the GPU

  Restart the Lightroom

  Let us know if it helps.

  Kind regards

  ~ Mohit

• Export without loss after Warp nouvis Image stabilization

  I apply image stabilization, then I want to make and re-import for correcting the colors and others. To speed up performance, due to the

  nature of the process of Image Stabilazation makes slow of course.

  The source file is saved with a helmet Cam Replay XD 1080 (model HD) .mov

  Basically I want to export the video with just the 'stabilizer chain', with possibility to reimport

  However, default lossless is out showing as AVI...

  I know how to change the format setting.

  However, I saw a video where when the guy did, she kept the .mov format, and it was not obliged to .avi.

  And anyway I go, the size of the resulting file is large enough.

  Is this normal?

  The default output on Windows module is an AVI file without compression. The default on Mac OS is a MOV file with compression without loss of Animation. Either of them will give you a huge file, since one is uncomprssed and one is only slightly compressed.

  more information here:

  http://forums.Adobe.com/thread/684381

• How to use ken burns in a still video image?

  I have a video clip. I move the playhead to a point in the clip and split the clip. I then do a freeze frame of the end of the first part of the split clip. This is where I met my problem. During the reading of the judgment on image, I want to zoom in on a region of the freeze frame, for example a face in a crowd, I want to stay zoomed in for a period of time and then zoom out to full frame, and then continue with the rest of the split image.  How can I do this? I tried to use Ken Burns but could not do work, I could zoom in but not hold the zoom, then zoom back.  Thank you.

  To do this, use three consecutive copies of the still image.  Implement effect of the Ken Burn to the still picture to zoom in.  Now add a copy of this clip and reverse images of beginning and end of the Ken Burns effect by clicking on the double arrows in the Style far right button (see screenshot).

  

  Now add a copy of a clip between the two clips and adjust the large frame of Ken Burns while she superimposes one smaller.  This gives you the extended break.  Adjust the length of the three clips and you're done.

  Geoff.

• iPhone 7 restore from iCloud still holding

  Hello, I have a new iPhone 7. Recently, I had saved my old iPhone 6 and wanted to restore the new iPhone 7 of my backup. I started the process of restoring the day I got my phone and it of been two weeks and is apparently still restore. I often have my phone on and loading and very good WiFi connection, but the restoration has not yet completed. I have some new updates to iOs which must be installed but that cannot be done until the restoration is complete. What should I do? When I look at my phone, it seems that I'm not missing any information. Any suggestions?

  He says that it restores from a backup on your lock screen, is thus that which is telling you that he has not finished?

  You have the ability to stop the restore process when you go to settings > iCloud > Backup? If so, then stop it. It could be an application that has not been fully downloaded, or other media that has not yet downloaded. I got my iPhone do that once in a while and like you, could see nothing which has not been restored. Maybe it's stuck saying it restore even if it's really over. A restore of backup should not take more than a few hours at most.

  If you do not see a way to stop the restore, then reset your unit: hold the home and power buttons at the same time and continue to hold until the Apple appears (up to 30 seconds). Once the reset is complete, the lock screen is displayed.

  See you soon,.

  GB

• Image stabilization creates warpy images! All the patches?

  I need to stabilize the movement of the real/frame image - but when I use Image stablilisation picks it up

  on any movement "within the image' (i.e. a tree blowing in the foreground) which gives a very nervous effect of deformation.

  Any way around this?

  Thanks in advance!

  FCPX v.10.0.4

  V.10.7.5 Mac OS x (on iMAC)

  WWhich type stabilization do you use? Try out the other.

• FS7K lens Image stabilization

  Received my KIt FS7K Thursday here in the United Kingdom.

  First of all, let me give you a profile of use of the previous video Sony:

  Currently I still own both the Sony HVR - Z5 (using Atomos) and Sony HXR - NX5 - my market spent was of videos on the site. Have all two large x 20 G lenses with IS excellent for the operation at hand. What residual movement at hand could often be stabilized using Adobe 5.5 and 2014 CC AE Stabilsing - no probem. I'm a fan of the 'pocket' more of 20 years, dating back to the early days of broadcasting in English

  What I see in my test of the FS7K shots is much more "shake". In fact I would say the lens SELP28135G gives me NO stabilization even if I chose the option "camera > Steadyshot > Steadyshot.» "Steadyshot Active" option which, in my experience in previous products, is 'more aggressive' is not selectable.

  I can confirm that the 'Otptical Steady Shot' switch on the lens all is market' '.

  Formats and codecs I test: HD 1920 x 1080 50 p and 50i as my previous experiences - not yet disappeared to test the 4K again.

  What gives? We expect the firmware updates?

  The Steadyshot indicator in the viewfinder, not necessarily told you the truth! This is why you must turn it on whenever you turn on. It is my understanding that this issue will be resolved in a next update.

  The asset IS is not compatible with the objective of stock but is compatible with some other Sony lens. Talk to your Sony representative to find out which ones who.

  See you soon,.

  Chris

• 3.0.98 (2.1) issue still holding for text messaging to open

  Recently, I noticed that my phone is now holding still to open the text message, enforcement is not serious if I use the phone app and handcent, they both can take over a minute to open I actually had to touch the screen to prevent of is dark before it could open. I also received each text twice, I restarted the phone and think it may have solved the problem dbl but still slow as hell to open it.

  
  

• still default images

  Hello

  When you always shoot jpg in PE7 they always that 5 moves second.

  So, I change in preferences I want, 5 images, but it does not work. The preferences field accepts 5 images, but it does not change the actual default value.

  Then I closed the program and reopened. He keeps executives 5 setting but still does not change PR7s behavior.

  Help, Andy

  It will not change the already imported photos. It should do so on the new imports.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• I tried to download macOS Sierra for the last hours on my Mac, but it is still holding still to download. Should I download the El Capitan instead? All sites tell me that I should update my Safari.

  I tried to download macOS Sierra on my macbook pro iOS 10 for a few hours and it still has several hours to go. Should I just download the Capitan instead? All sites tell me that I should update my Safari or I wouldn't even through this disorder.

  You must complete the download of Sierra. It is a very large file and will take some time, especially on a slow Internet connection.

  (145165)

• iMovie library moved but still holding the disk space

  I create separate iMovie libraries and record them on an external hard drive so that they take place on my computer drive. When I look into iMovie, all the various events, I had aren't there, so it would seem that save them to the external hard drive was working. However, my storage show a huge amount of space is being taken up by movies! Under "movies" in the Finder, I clicked on "View the contents of the package" for the iMovie library, and it shows all of the projects I have and under each one of them is the original media that I had moved on the external hard drive!

  I am very confused as to why this is happening. The raw images should not be on my computer if I'd put away them!

  They are not under the iMovie library when the program is opened. Should I remove the projects too?

  I'm running iMovie 10.1

  You seem to have copied and not moved.   How exactly did you create and populate the libraries on the external hard drive?

  Geoff.