Stop a loop Codes

Similar Questions

• Stop the loop in the process

  Hello

  Once, I am for another question, desire to learn more about labview and these countless obscure secrets.

  Well my problem seem is a common problem, but I have not found the answer in other topics.
  Here are the levels of my (simpler if you look directly at VI) VI

  1st level, I have an event to bring the action or return to the main Vi
  level 2 (during the measurement process), I have an loo whilep with an event case inside to stop the loop if the process is blocked. but it does not work.

  And to make matters worse I can't press the keys at the start of the measure

  I'm on this problem for 10 hours is not a question asked without thinking, but I am really stuck.

  Thank you

  Firstly, stacking of the structures of the event is going to be tricky, very quickly, so I want to disencourage to do until you are an experienced developer of LV. You are currently a little diving on the "first numbers", which is generally understood as the warnings from the structure of the event.

  The second thing is that I understand that you want to terminate the wait function itself (which represents your external code). This can be done. The reason is simple: LV is just waiting for the code complete. So saying LV to stop his execution will happen as soon as LV "took over". This will happen once the external code is complete.

  You CAN complete the thread using the Windows API, but you should / must restart the entire application of the LV to prevent corruption of memory created by the son put to death (not recommended).

  hope this helps,

  Norbert

• stop the loop inside while loop

  Hi all

  Is there a way to stop a loop within a while loop? Error-free program will stop running when you press the stop button, but I want to while loop continues to run in and only for the loop stops when the condition is met.

  Thank you!

  Hi TayAus 1.

  If you want to run the execution once? Maybe something like below? The code inside the structure of events can only run when the event source is triggered. For example, the code in the digital works only when it detects a change in the numerical value (just an example).

  

  When the button is selected, it should raise the event to stop as shown below:

  

  If you want to create the event source, create the structure of the event > right-click on the frame and select edit events dealing with this... > This should open Edit events.

  The example below is that I put the event source for the change in the value of x and x 2.

  

  So when x or x 2 value is changed, executes the code in the sous-schema event shown below.

  

  Warm greetings,

  Lennard.C

• goes into infinity "tabs" loop when I type any email 'Contact us' button how can I stop the loop?

  goes into infinity "tabs" loop when I type any email 'Contact us' button how can I stop the loop?

  You use a Mac, or you're on another platform?

  Any other use of platforms:

  • Mac: Firefox > Preferences
  • Linux: Edit > Preferences
  • Windows: Firefox > Options

  Press F10, if the menu bar is hidden under Windows and Linux, or use "> Firefox Options/preferences.

  • http://KB.mozillazine.org/File_types_and_download_actions
  • https://support.Mozilla.org/KB/managing+file+types

• How can I stop the error code "security sandbox Violation".

  SecurityError: Error #2060: security sandbox violation: ExternalInterface calling https://z.moatads.com/swf/MessageSenderV2.swf cannot access https://static.skypeassets.com/adserver/AdLoader.html?version=1.66.9.
  at flash.external::ExternalInterface$/_initJS()
  at flash.external::ExternalInterface$/call()
  at MessageSenderV2_fla::MainTimeline/frame1()

  [The update by the moderator topic title should be more descriptive. [Original topic title was: 'How to stop this error code?']

  Download this update.
  
  https://support.Microsoft.com/en-us/KB/3089023

• Always leads when I stop my loop

  Dear all,

  Now, I used OR-6008, when I used case structure of program via the digital output. You can turn on and off. But when I tried to turn it on, then stop button while loop. The light that I connect to is always when I stop my program. How can I turn off which led when I stop my program?

  Thank you

  1. your outter loop is not necessary at all.

  2. you have a lot of duplicate logic.  If you're not over your threshold, of course you will be inferior to her.  If you can do a lot to reduce your logic.

  3 things will make a lot more sense if you convert your DAQ meter data immediately after the DAQ Assistant.

  4. move your writing digital output outside the structure of the case.  Also allow the timer to influence the case which is called.  In this way, you can tell the exit to go simply false when your stop the loop condition is met.

  5. as you collect only 1 analog value at a time, change your chart to a graph.  A graph has a history built into it, which I'm sure you would like to have.

  

• lets stop the loop parralle notification

  Hello

  Everyone

  I created several loops producer/connsumer.

  A loop producer is business event that hold value control change of FP and then send queue consumer loop (solenoid)

  The other separate producer loop is to NEITHER 9213 display Temp data, I use another loop of consumer to acquire the data of NI9213

  I don't know if I can use notification to stop the two pairs of earrings.

  I hope that when I click on stop the whole process in PF button, then, the True value is sent to the notification. The NI 9213 producer loop then get this message to stop the loop. Now, stop process only control solenoid buttonhole since this button is in the structure of the event.

  I tried the notification. When I put wait notification NI 9213 looping, this loopkeep wait any notification and doesnot monitor temporary data

  Thank you

  
  

• FPGA code will stop when the code RT

  I developed a FPGA code to manage a piece of hardware. It's the installer to read some default Panel control configuration values and then sit there constantly respond to signals input and output signal.  The bitfile FPGA is written in flash to load FPGA memory and starts almost immediately. So far, everything is good.

  Then I layered on the code of RT (cRIO-9075) system that opens a reference FPGA to the FPGA façade and allows me to follow a few indicators and change configuration settings and cause the configuration settings is changed be used by the FPGA.   So far, it seems to work too when I run the RT code interactively (eventually there will be an interface for a host system).

  The problem occurs when the code RT is ordered to stop. If you stop the RT code also, the judgment of the FPGA code and I will not stop the FPGA code. The RT code does not all calls to order the FPGA code to stop execution. When the RT code is stopped, the only thing she does in regards the link to the FPGA is to close the reference FPGA VI which was opened when the RT code was started.

  What should I do to cause the code FPGA to continue to operate as the RT code is started and stopped?

  I have to wait that I return to the office tomorrow to test this, but I think that this link has the answer to my problem.

  http://lavag.org/topic/16412-confusion-regarding-FPGA-Deployment/#entry100294

  It is said: "close FPGA VI reference. If you right click you have an option to close or by default close and reset. This means the VI FPGA is reset (read aborted in standard LV talking) when we close the reference. »

• How can I stop all loop with number completely?

  Hello

  I want to stop any loop in a specific State. It's a part of my project.

  for example, I want to stop everything in a loop after that the i is 12. I can do, but the problem is that any new from 0 after the i is 12. I want to campletely the stop after the i = 12 I ever change

  I am attaching a photo to delete.

  Thank you very much.

  
  

• How to stop a loop "for".

  Hello

  Do you know how I can stop a loop for? because when I click on the stop switch on my front, the VI didn't stop and continue to perform the loop.

  If you have a newer version of LabVIEW, you can right click on your loop For and show the terminal stop.  This will allow you to stop the execution of the loop For the earlier that you would otherwise based on the N or the number of items in an array of automatic indexation.

• Pavilion G6 power on password forgotten by my friend, just trying to help him. stop the 66158175 code

  Pavilion G6 power on password forgotten by my friend, just trying to help him. stop the 66158175 code

  Hello

  Try to enter: 79830171

  Kind regards

  DP - K

• stop the 52601487 code

  stop the 52601487 code

  Hello

  Enter: 43769409

  Kind regards

  DP - K

• Stop fieldChange loops

  I use a FieldChangeListener on two fields, and when one of the two fields are changed by the user, the other field is updated by the program.

  For example, I want a change of user to the first field to update the second field and stop.

  A change of user for the second field should update the first field and stop.

  How can I keep it from looping automatically from one to the other?

  Is there a way to determine if the second field is get updated because:

  (1) the first field has been changed by the user or

  (2) the second field has been changed by the user?

  I tried to check if (FieldChangeListener.PROGRAMMATIC), but it is always true.

  Thank you...

  Thanks for the interest.  I found a solution.

  I had two fields (think payment and amount).  Given that the price of the order of the day is fixed, I could change the amount I pay (payment) and the amount I would receive would update.  Or I could change the amount I want to buy and update the payment.

  The problem I had was that because these two areas were controlled by the listener of domain change, as soon as it would automatically update the other, an infinite loop would begin.

  I solved it by creating a new Boolean variable that I set to false by default.

  I check this variable in the fieldChanged method and if it is true, I put it to false and back.

  When the field is changed, I immediately put the new variable to false to stop the loop.

  Here is an excerpt:

  boolean changeLoop = false;        
  
  public void fieldChanged(Field field, int context) {
  
      if (changeLoop) {
          changeLoop = false;
          return;
      }
      if (field instanceof BitmapField) {
          changeLoop = true;
          payment = pricField.getDouble() * quantity.getDouble();
          paymentField.setText(toString(payment);
      }
      if (field instanceof BasicEditField) {
          changeLoop = true;
          payment = Double.parseDouble(paymentField.getText());
          quantity = payment / pricField.getDouble();
          quantityField.setDouble(quantity);
      }
  }
  

• You can stop a looping in 9 Captivate OAM?

  Greetings,

  I have a project in 9 Captivate that uses animations created in Adobe animate, through OAM import. They are very simple, more animations in a picture revealed by an animated mask.

  On the last picture of the project Animate, I inserted a "this.stop ()"; action. In my export settings, I deselected 'chronology of the loop.

  OAM imports fine and plays, but it loop forever. I find not a setting to 9 Captivate to stop a loop to occur.

  Someone has ideas how to stop the animation from a loop?

  Thank you.

  OK, I solved the problem.

  All I did was correct in Adobe animate. And things worked as it should in Captivate 9... a point. Even if I had updated the Adobe files animate OAM, I continued to see the old files in Captivate.

  The problem lies in 'Update library items' Captivate 9. With the files of the OAM, 'The library updated Elements' does not work. It does not update the items. The only way to update a file OAM in Captivate 9 is to remove it from the library and import it back.

  I'd say it is a bug and get a frustrating.

• Stop a loop on a timeline

  Hello. I'm a newbie and have learned Flash pro CS5. I understand how to stop the loop of a total chronology. However, I have problems with that. I created a motion tween on the text that fades in and out and the stars around the words that "twinkle." I want to stop the closure of the txt, while the stars continue to loop (and twinkle). Can be seen at www.tayzach.com.au. I hope someone can help. Thank you!!!

  Create the stars as a separate movieclip and places in the timeline.  In this way the movieclip star will keep looping while animating text stops.