Do not read the cd copy control emi on pc!

Similar Questions

• Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "coul

  Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].

  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "couldn't copy file at the location requested.  Help, please!

  Your use of the word "files" (in the plural) still makes me believe that you have not checked the permissions on the folder that is appropriate (in the singular).

  You must determine the Destination of the Lightroom Import dialog window Panel and see which folder Lightroom is really tr6ing to copy photos in (which may have been accidentally changed and is not what you may have used in the past) and change the permissions to write to this folder.

• Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd

  OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
  This cannot be a hardware problem, it must be the software should not it?
  Can anyone help?
  Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
  Unfortunately the computer is just out of warranty

  Hi Robert,.

  Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.

  I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.

  Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.

  Kind regards

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• Adobe Lightroom will not read the raw files

  I have a Nikon D3000 I was shooting in raw and using lightroom 3 for about 3 or 4 months, he has always worked very well, but today when I tried to download some pictures, he said that he could not read the files. I uninstalled then reinstalled lightroom and downloaded an update, but it still doesn't work. I don't know what to do to make it work, any ideas would be greatly appreciated.

  mbearden12 wrote:

  How would I copied the files from camera/card on hard disc using the Finder? I have not tried a different usb cable and yet, I do not understand why it suddenly stopped working.

  Connect photo/card reader to your computer and drag image files into a temporary folder (or your desktop).

  A cable/card reader/port can go wrong from one hour to the next, so you have to find the root of your problem using any other material.

  Beat

• Cross-origin request blocked: the same political origin does not read the remote resource

  while trying to perform the CORS get request I get this error:
  Cross-origin request blocked: the same political origin does not read the remote resource
  In chrome it works fine.
  I'm using firfox version 29

  A good place to ask for advice on web development is the forum mozillaZine 'Web Standards Development/evangelism'.

  • http://forums.mozillazine.org/viewforum.php?f=25

  Aid to this forum are better informed on issues related to web development.
  
  You must register on mozillaZine forum site to post in this forum.

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• I have a MacBook, and itunes does not read the cd, the track or album titles.

  I have a MacBook Pro and when I try to import a music CD into my iTunes library, iTunes not read the album or track titles.  I've seen other messages on re - install iTunes, problems with Gracenote and be connected to the internet.  My computer is connected to the internet and Gracenote is still not read the CD.  Is there a solution for this other than to manually enter the tracks on the album and track names?

  It is a commercially available original CD?

• Re: Satellite P500 of USA - can not read the local DVD

  Hello

  Sorry to appear such a luddite acquired but this laptop great USA from eBay.
  User manual appears to indicate that the player is going to adapt to the locality of the drives I want to play.

  Not had any luck with playback at all to this day, the error message 'not compatible' etc., any guy of suggestions?

  See you soon,.
  Michael

  Hi mate

  I think that the portable player s (optical disc) DVD region is set in the United States and therefore you can not read the DVD released for the European market.

  To resolve this problem, you must change the option of DVD region 2 region.

  My computer-> drive CD / DVD-> properties-> Hardware tab-> choose the CD drive / DVD-> properties-> DVD region

  Notes; You can change this settings ONLY 4 times. After that the parameters is no longer editable.

• CD player does not read the series Satellite A recovery CD

  Hello

  I have a laptop my father gave to me and I need to restore it before using it for me because it works very slowly.
  I have the restore cd but I have problems with the cd player.
  It does not read some CDs, but it will not read the cd recovery so its as if it is not there.

  Is it possible to restore it without the cd? I'm not very super-friendly up with computers, so please simplify if possible.

  Any help would be appreciated.

  Thank you

  Claire.

  You can try to boot from the original CD of Microsoft Windows.
  Check if this CD is readable.

  Then you can download the drivers from Toshiba from the European driver Toshiba page and could install the drivers

  A few words about the CD drive problem, it seems that the goal of readers can calibrate in the right position and therefore some CD or DVD is not readable
  In most cases, the CD/DVD drive should be replaced to solve these problems

  See you soon

• iPhone 6 does NOT read the SIM cad

  Suddenly after serving more than a year our 6 Iphone does NOT read the sim card. Area of the sim card from the iPhone 6 to our iphone 6 plus the card works well. And the sim card in the iPhone 6plus does NOT register in the iphone 6. So I guess that it is a mistake in the iPhone 6. We think the 'operator' menu item is generally absent in the iPhone 6. Anyone in the community has a solution this problem of reading.  The two IPhones are updated to IOS 9.2. Thank you

  my best bet would be the connector which connects with the sim tray is default

• Satellite A40-231: SD-R6112 will not read the DVDs I burned

  I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

  Hello

  @Magnus:
  Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
  In addition, this burning program did you use?
  I use Nero. Form is the program better combustion and I never had a problem.
  What you need to do is to test several DVDs. not all media work on the disc.

• Microsoft Outlook 2016 "could not read the calendar. Unknown error.

  iCloud version 5.1 Windows last 10 develop Outlook 2016 Dell XPS8300

  iCloud moved very well and without error messages. iCloud Contacts and reminders are OK, but when I access iCloud calendar I get this message: "could not read the calendar. Unknown error'

  Three facilities on other similar configuration PCs were flawless with every feature works perfectly.

  Have reinstalled Office 365 and iCloud 5.1 on affected PC several times with the same error when access iCloud calendar.

  Corrections and troubleshooting suggestions are most appreciated.

  Surprisingly, all that was necessary to solve this problem was to select the iCloud in 2016 Outlook tab and press the button refresh!

• Account Internet preferences system does not recognize the password for my AOL account... and so mail does not read the email in my AOL account

  Account preferences Internet system does not recognize the password for my AOL (Internet) account... and so Mail does not read the email in my AOL account

  Mail asking me to "Enter your password for [my AOL account] in Internet accounts."

  When I enter my password Internet accounts says it is "Impossible to verify the account name or password."

  iMac (24 inch, early 2009)

  Processor clocked at 2.66 GHz Intel Core 2 Duo

  Memory 8 GB 1067 MHz DDR3

  OS X 10.11.1 (B 15, 42) El Capitan

  Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.

  The problems of Keychain - see post of khati

• I can not read the mail or cannot send mail can help me

  Hello

  I have account hotmail for 12 years, I don't have to face the problem like this. when I connect to my e-mail hotmail id it will open a session and I can not read the mail or I Unable to send mail or I can't delete the mail. pls tell me what to do a possible side help you pls tell me

  Hi romain kumar_803,.

  Thanks for posting your question in the Microsoft answers Forum. Your question it will be better answered in Forum Windows Live Hotmail. Please repost your question here.