Stop automatic transition to the new slide

Similar Questions

• Stop the slides automatically advance to the next slide

  It seems this would be a common request, but I can't find a solution anywere.
  Captivate automatically moves to the next slide when the previous slide ends. I would like to stop and wait for the user to click on the 'Next' button on the control of playback.
  I don't want to have to add another button 'Next' to each slide. It would be redundant and time consuming. I just want to use the next button in the playback controls. How can I get each slide to stop and take a break?
  
  Is this possible?

  Can I have answered my own question, BUT I would like to know if experts here have a better way to do this...

  Solution: Add a new text button to slide 1. Empty the text on this button. Select the option to make the button "transparent". Then copy the button to the Clipboard. Select all of the slides in the project. Hit the dough.

  All the slides have now a 'hidden' object that stops them. They can click on the next button in the playback controls to move forward at the end of each slide.

• My PC (Windows 7), will automatically connect to the new networks unknown wireless is in the range. I want to stop it.

  I found a variety of positions that describe how to disable the "connect automatically" option for a specific network you connected to in the past (via 'manage wireless networks), for example:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-to-disable-auto-wireless-connect-in-Windows-7/52d33896-F356-4F9F-8390-79a686900cab
  http://checit.SCU.edu.au/index.php/FAQ/387
  They do not resolve my problem because my computer connects automatically on * new, unknown * networks that I've never connected to the front (and also, even after it connects to these networks, they do not appear in the list under 'Manage wireless networks').
  Apparently, it set to the default behavior to automatically connect to the new network he meets, and I need that to turn off. Thank you.
   

  Hi Michael,

  I suggest you to perform the steps mentioned by "Steve Winograd replied on November 6, 2009"of a similar discussion.

  Wi-wired connections on the same computer, Windows 7.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wired-and-wireless-connections-on-the-same-Windows/ee40d9a6-297b-46D4-b5c8-db57d927b62e

  If the problem persists, I suggest to uninstall and reinstall the wireless card to reset all wireless connections.

  Hope this information helps. Response with status so that we can help you.

• Automatic return to the previous slide

  Hello

  It's probably very basic and I just never had to do so patient with the question.  I have a 'menu' slide in which the user can click on one of several areas of click to go to another slide.  Once they are on the new slide, I would come back automatically to the menu slide without the user clicking on something.  This can be done?  I use CP4.

  Thanks in advance for your help.  You are great!

  Gary

  On the properties of the slide, search where you can specify the action on Exit. Set it to go to the slide, and then select your menu drag in the drop-down list.

  This means that when the slide ends play it will automatically switch to the menu slide.

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Automatic, go to the next slide

  None of my slides now automatically go to the next at the end of the timer.  Why would it be? Having buttons to move forward and back stop this function?

  I see my mistake, I had to pause until the user clicks.

• No automatic updates with the new motherboard. The adjusted settings as advised by your article, restarted the computer - nothing. Downloaded new copy, same problem.

  I get a notification that there is a new update for Firefox and click on it, but the computer is unable to connect to the server and download (if not internet connection works perfectly). I downloaded a new copy and the problem was not solved. I went to your site and set the parameters as indicated by your article, restarted the computer and it is still impossible to have an automatic update as before. (Before the change of the motherboard on the computer of authorized service everything worked fine).

  Try to remove FF from your pc and then it re-download the new version.

• When I've just updated to version 4.0.1 I have lost previous, next, reload and stop as well as the new acting extremely "wonky"?

  I upgraded to 4.0.1 a few days ago. no problem to do the update, download the new version. but it seems to be missing some things (reload and 'stop' buttons) on my new version as well as to have some non-functional things (' buttons next and previous ""). I'm not able to create links or hyperlinks to websites that I've been able to create in before this new version. That's just what I know of who is "wobbly", who knows what else is not in my version, or is not functional?

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  See also:

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Transition to the new laptop computer lost all the previous laptop changes

  Hello

  I just got a new laptop and have connected my hard drive to start using Lightroom, but when I load it into lightroom there is no retouching, sides etc it's just the raw file?

  can I transfer through the changes in the old laptop?

  I used Lightroom Cc on the old laptop so

  see you soon

  You must copy your catalog file original from your old computer to the new computer and use it. By default, LR stores all changes in catalog file. So if you copy the file from the old computer to the new computer catalog and you started a new catalog on the new computer any changes that you made on the old computer are lost.

  Around this is to check the option in the settings of the catalog to the changes of automatic writing to XMP. With this option checked LR creates an XMP file for 99% of the RAW images or writes the changes to a specific place in the file of the actual image for DNG, JPG, TIF and PSD files.

  But now turning on this option will not help. You need your original catalog from the old computer. Or go back to the old computer with the external hard drive connected and turn on this option.

• Is there a way to disable automatically go to the next slide?

  I'm working on a project in which a button can be clicked to play a sound, but I want the button to be clicked more than once, without the project progresses to the next slide. I tried to put in invisible buttons to stop the project going forward, but that doesn't work once, all following clicks are the advancement of the project. Is there a way to disable this option?

  Take a look at this movie from YouTube, explaining how to replace the simple action by action standard oneliner to prevent the head from reading to be released:

  http://www.YouTube.com/watch?v=M3nKi-DB6Fw&feature=plcp Sorry, but I cannot use the link button (to have a meaningful text) in Chrome.

  If you prefer reading:

  http://blog.lilybiri.com/why-choose-standard-over-simple-action

  Lilybiri

• Best method to copy the audio project to the new slide?

  Captivate v5.5

  I have a project composed of slides.

  Each slide has its own audio.

  I need to update the project (resizing and editing slide images), but the audio does not need to be changed.

  Rather than recording the narration for each slide again once, I intend to copy the audio for each slide of the old (export) project to the new project (import). Audio slide 1 of the former gets attached to the slide 1 of the project new etc.

  Suggestions as to how best to do so taking into account, I have several slides each with their own audio and I make sure that I am attaching the right audio file to the new version of the slide, it was copied from.

  Thanks in advance,

  Noel

  Hi Noel,

  Can only explain what would be my method in this case. All the audio clips can be found in the library, but they have a very descriptive name. I identify and change the name (if they must go on the same slide number, simply put the number of the slide inside). Then in the new project I open the former as an external library (file, import, external library) and drag audio clips to slides that are appropriate. External libraries are so little known, but I use them all the time (have a set of functions frequently used in the files in separate project that I only use external libraries)

  Lilybiri

  PS just see the official answer from the staff, but please, rename your clips there as well or you will not be able to identify them. In the original file, you can watch the clip in the library of each slide

• Embed the video does not stop when moving to the next slide...

  Hello

  I have a swf file that has 10 slides.

  2 blades have video integrated inside. His works well when I look at continlusly and better bandwidth, but when I tried on lower bandwidth then the video takes time to appear. On average while when clicked on the next slide to ignore the video, overlapping sound happens.

  So what are the best way to stop the previous video of the slide with voice so overcome that problem.

  Please let me know.

  Thank you

  Jonathan morsa

  Have you tried using Insert > FLV or F4V option to see if it works differently to you regarding audio turn off when you switch to the next slide in the file?

  Insofar as the loading time of your videos, try adjusting your project to a higher percentage preloader, for example 50% or more.  However, in general, I would say that you don't place video files even moderately heavy on the slides to the beginning of your project.

• Stop adding sites to the new tab page

  Before installing the update, when I opened a new tab only the best 4 sites that I pinned would be present. After all other sites in my history make their appearance on the new tab page, and I had to delete them manually. How can I prevent NEW sites from popping up and just keep the 4 I want?

  What is the setting for the rows and columns?

  • Browser.newtabpage.Columns
  • Browser.newtabpage.Rows

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• I would like to know WHAT WTF Firefox automatically updated for the new POS 31 worm?

  I did NOT authorize this, FF is set on alert me on a more recent version, NOT UPDATED AUTO - magically!

  I specifically use an older version of maintaining a set of plug-ins and Add-ons that are more compatible with your flavor of worm #7653 the frickin ' week!

  Now, I have to waste an hour of my life this ugly POS UNINSTALLING designed for mobile phones and tablets and re - INSTALL my old favorite version that is compatible with my plug-ins.

  Thank you very much! NOT!

  The feedback option did not work, needless to say that FF has made me sad...

  What are the plugins and extensions that do not work with Firefox 31? Not that I can correct necessarily, but maybe I can get something to the top.

  When it comes to appearance, you've probably seen: How to make the new look of Firefox as the old Firefox.

• Impossible to make the transition to the new synchronization

  I'm moving to a new hard drive after mine died. I don't have my Synch firefox pass code thingy though none where he Add. What can I do? It's REALLY annoying me to hell.

  Can anyone help? I obviously can't UN-sync the old so one... what should I do?

  The new synchronization in entirely separate from the older version of Sync and uses different servers, so if you want to retrieve or otherwise access the data from an old account of synchronization, then you will have to install an older version of Firefox and then updating Firefox again to the 29.0.1 version.