Automatic, go to the next slide

Similar Questions

• Stop the slides automatically advance to the next slide

  It seems this would be a common request, but I can't find a solution anywere.
  Captivate automatically moves to the next slide when the previous slide ends. I would like to stop and wait for the user to click on the 'Next' button on the control of playback.
  I don't want to have to add another button 'Next' to each slide. It would be redundant and time consuming. I just want to use the next button in the playback controls. How can I get each slide to stop and take a break?
  
  Is this possible?

  Can I have answered my own question, BUT I would like to know if experts here have a better way to do this...

  Solution: Add a new text button to slide 1. Empty the text on this button. Select the option to make the button "transparent". Then copy the button to the Clipboard. Select all of the slides in the project. Hit the dough.

  All the slides have now a 'hidden' object that stops them. They can click on the next button in the playback controls to move forward at the end of each slide.

• How to make a slideshow w/o it automatically move to the next slide?

  Hello

  I have a collection of photos that I want to "slideshowed". I would like that they expansions of to fill the screen. But I want control over how much time the slide is displayed. I want the control to say 'next' (as opposed to iPhoto moving to x number of seconds). I hope I described what I want.

  My question: is it possible? I know it sounds like something that you would do on PowerPoint, but I don't want to resort to that.

  Any suggestions?

  Thank you!

  You can't, but you can set the value display time of each slide to maximum 27 minutes 10 seconds

  

  or the value of each individual slide of a duration of 59 minutes:

  

  Who would do essentially the same thing as you want and allow you to move to the next slide, or return to the previous slide with the arrow keys on the keyboard manually.

  

• Is there a way to disable automatically go to the next slide?

  I'm working on a project in which a button can be clicked to play a sound, but I want the button to be clicked more than once, without the project progresses to the next slide. I tried to put in invisible buttons to stop the project going forward, but that doesn't work once, all following clicks are the advancement of the project. Is there a way to disable this option?

  Take a look at this movie from YouTube, explaining how to replace the simple action by action standard oneliner to prevent the head from reading to be released:

  http://www.YouTube.com/watch?v=M3nKi-DB6Fw&feature=plcp Sorry, but I cannot use the link button (to have a meaningful text) in Chrome.

  If you prefer reading:

  http://blog.lilybiri.com/why-choose-standard-over-simple-action

  Lilybiri

• When I click on the Accordion widget it goes to the next slide.  I just want to let the 'response' to the show and then go on the following does not slip

  I'm building an Accordion widget with four bars.  When I saw it, and then click the 'question' the 'answer' is displayed for a second but then moves to the next slide and does not give me the time to click on the other bars.

  I compared to another Accordion widget that works fine and the sync settings are the same but works perfectly.  Any suggestions?  Thank you

  Well, I kind of thought to it.  I have 'next' and 'back' buttons on all other slides and when I copied them to all of a sudden it does not automatically go to the next slide.  No idea why, but heck, it works.  Thanks for the comments

• Several boxes click - advance to the next slide, before I want what he

  I have 3 boxes click on a slide. Two click boxes open PDFs and the 3rd is a recognition area, which gets clicked after 2 PDF files have been read.

  

  No matter who click on the box I click first, it automatically advances to the next slide. Boxes of 2 click open pdf file just have the "hand cursor" selected and nothing else (see image). The click of recognition box has the "project to break up what the user clicks on" selected.

  Someone at - it other suggestions, I could try? I use 8 Captivate.

  

  For the PDF file (here I used a URL: you can try this)

  

  Which is triggered by the stopping, click box receipt?

• Stop automatic transition to the new slide

  Hello
  I don't know it's right in front of my face somewhere, but I can't figure out how to stop captivate to automatically proceed to the next slide. I created a video full-motion that spans two slides. After the end of slide 1, it automatically goes to the two slide. I inserted a transparent button, I want the user to click before moving on to slide 2, and he gave to "Go to next slide" action when you click it. Does not work well... Cylinder head moves automatically without having to first click. I don't see anything under properties of the slide for this either.
  
  Any help will be appreciated.

  Welcome to our community, Jason!

  Normally, you stop a slide by inserting an object button or click box. These two objects a pause until the user clicks the slide dead in its tracks. However, if the blade stops or not is your choice. You can disable if you need to. But by default, they take a break.

  See you soon... Rick

• I can't get the move animation to automatically trigger the next slide

  Hello

  New to Keynote. I wonder if there is a way to trigger the next slide to load after doing an animation out, that does not involve having to make an additional click? For now, I have text that moves transition and get him out on click, which then leaves me a blank screen, rather than the transition to the next slide.

  Pointers or help with this would be really appreciated.

  Click the background of the slide from the slide that has the text animation: Inspector > Animations > Transitions:

  the value of the drop of Transition start automatically

  Enter an amout for the delay, if any

• Slide will not automatically advance to the next

  I have a slide that I need to switch to the next slide after the audio and video playback. The audio and video are both set to play automatically when the slide is entered. All my other slides in the project automatically move to the slide following and some of them have audio and video. If I activate the blade PlaySkin is as I want it, which is to play the audio and the video once and then go to the next slide. However, I don't want the PlaySkin in the lesson at all. This lesson is just a quick tutorial and didn't need the skin.

  It was my actions for this slide

  

  When the blade reaches the end of the video, the video will stop, but the audio loops. I don't have the "Loop Audio" active choice. And with only one change the presence of the skin, it works. Is anyway I can fix it so that the blade will automatically to another without going through it have skin?

  Thank you

  Kellie

  Figured it out! All I had to do was select the video and on the timing tab in the property inspector, change the display for: for the duration of the video. They will then advance to the next slide.

  

• How to go to the next slide during Drag and Drop

  I'm trying to go automatically to the next slide after the user makes a three 'drop zone' drag and drop.

  I see the action on the successes in the Panel. I chose to go to the next slide, but nothing happens after I have test.

  I also put in place the right answers for the drop areas three and thought that could trigger the part of "success."

  but still nothing happens.

  Any thoughts?

  Hi again,

  I understand, but in order to move to the next slide automatically the drag and drop must be introduced. It doesn't matter whether or not you include your drag and drop in a quiz. The option to send automatic drag / move it will include not a quiz, is to check if the answers are correct or not. You can leave to include it in an unchecked quiz.

  Thank you!

• Prevents Adobe Captivate to continue to the next slide

  Hello all and thanks in advance for any answers.

  I've been using Adobe Captivate 4 for a little and believe I don't know what I'm doing, but I'm stumped on this one.

  I'm creating a troubleshooting guide for our users. The blade has a button that calls any javascript to open the network connections window instead of toward it.

  (function runApp() {}
  var shell = new ActiveXObject ("WScript.shell");
  hull. Run ("control.exe ncpa.cpl");
  }

  runApp();
  )

  After they do their check, they have a question that is asked of them with a Yes/No with a jump to slide for each option.

  When they click on the Javascript button, that opens very well and the slide remains now. But if they click the button a second time, the slide automatically goes to the next.

  I updated the slide properties 'No Action' at the exit and I even tried infinite/100 clicks on the java button and slide still goes to the following.

  I even tried to hide a button click on the slide with a "No Action" on the success or failure, nothing helps.

  Is this a bug or am I missing something?

  Thank you again in advance!

  Serge

  Hello

  When you look at the properties of the button, you guarantee that you have unchecked the box for the option "continue playing project"?

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• cfpresentation - manually switch to the next slide

  Hi All-
  
  By creating a slide show with the new cfpresentation/cfpresentationsilde tags, I was wondering if there is a way to let the user to manually navigate to the next slide instead of use the "duration ="value"" attribute in the tag cfpresentationslide (which causes the preso just continue to the next slide after the number of seconds). Anyone know?
  
  I think that this added functionality is ideal for the CF and I'm blowing all repositories PowerPoint presos. I even built a report showing data exchange using the tag cfexchange! Awesome!
  
  Thanks in advance for your help-
  
  Rich

  Hell I have to stop being so lazy...

  After a quick review on the Livedocs for CF8 (which I love btw) the answer to this problem is to define the attribute of automatic reading of the tag cfpresentation on 'no' (or 'false'), which translates as "the user must click the Play button to start the presentation, and click the next button to move to the next slide in the presentation."

  As an added benefit of this feature already-cool-and-be-cooler, this link ( http://www.coldfusiondeveloper.com.au/go/news/by/ray-camden/DE8E6506-C09F-4506-91E4B50AFCB CF9C7 /) talks about how a presentation can be generated, saved to a file, compressed and sent to a user and read WITHOUT CF.

  This opens up many doors...

  Rich

• Why a slide should a double tap to move to the next slide, the others are simple taps

  Hello

  I have 4 slides of film in a keynote presentation.  3 of them, a single tap once begins the next slide.  But I have a slide film which stops, but needs two cocks to move on to the next.  They all look the same transitions and effects (IE, no)

  Any ideas?

  Barry

  The usual culprits are either an object on the slide, visible or invisible, with animation attached, or the slide is duplicated

• Quiz on progression to the next slide after an incorrect answer - Cp9

  Hi just goes Cp8 Cp9, import an existing module created in Cp8. knows a mistake in action/behavior on a quiz question slide. When the wrong answer is sent, presents legend of failure (it's good, same as before); However, the 'click anywhere to continue' behavior does not to the next slide. On the contrary, remains the same quiz question slide and all captions of your comments are deleted. The remains of Submit button. Tested and when the right answer is submitted Everything progresses well.

  Help, please. It is not happened to Cp8. Can't find it anywhere in properties that an adjustment needs to be done.

  Thank you kindly.

  Terri

  There are a few changes in the quizzes. You are on the latest version: 9.0.1.320?

  You can try to recreate something from scratch with the same settings, check if it is due to the upgrade?

  How many attempts do you allow level question? What is the action "after the last attempt?

• Go to the next slide - problem!

  Hello world

  First thing: I'm not an expert in Captivate, but I learn every day to use this great software... so please, be patient

  QUESTION:

  I am trying to generate a course, very small and simple, but I have a problem: when I click on "Preview", I see that each slide appears after the previous. I need to let the user decide when he wants to move forward!
  Example: I have to generate a slide requiring 2 min of reading, but after this time, it is important to stop Auto progression. I chose not to show the progress bar but the problem remains.

  All commands in a standard advanced action will be executed in sequence. If you want to display an image, you need to allow time for the user to see the image before the read head moves to the next slide. If you are on 9 Captivate, you can use the command 'delay next actions. " An easy way that can also be used on previous versions:

  • Create the button with just the simple command continue
  • Start the chronology of the image just after the point of suspension of the button
  • Extend the chronology of the image until the end of the slide (CTRL-E)
  • Estimate how much time the chronology of the image must be.
  • When the playhead is released by the click of a button, the image will appear and playhead moves until the end of the slide, and then go to the next slide