How to restore the connection to my HP 4500wireless printer? (Windows Vista)

Similar Questions

• How to restore the D drive without having to reinstall Windows Vista?

  Original title: reload drive D

  I was deleting files in the E drive and eveything inadvertainly demolished in the D drive.  Player D can be restored without reloading Vista?

  Hello gdlawson1,

  It is a question better directed to HP.  They would be in a better position to tell you if this is possible.

  Best regards

  Matthew_Ha

• How to restore the connection wireless internet?

  Impossible to establish a WiFi Internet connection.

  
  

  Laptop can only connect via LAN. Connection Wi - Fi deleted while surfing online. don't know how to restore the connection.

  
  

  
  

  Hi WeiShangSing,

  To set up a wireless connection on Windows 7 computer, I suggest you to refer to section of the online help and check if it helps.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-CA/Windows/setting-wireless-network#1TC=Windows-7

  If you use a wireless router, you can also see this link for help:

  http://Windows.Microsoft.com/en-CA/Windows/set-up-wireless-router#set-up-wireless-router=Windows-7

  If you are having problems with the connection Wireless to the computer please answer back with error message. If you need help, I'll be happy to help you.

• How to use the scanner Canon of my computer with Windows Vista?

  How to use the Canon Scanner of my Toshiba with Windows Vista computer? Need help, tq.

  How to use the Canon Scanner

  http://www.ehow.com/how_5796443_use-Canon-flatbed-scanner.html

  I would propose Canon Support and the knowledge base for information and manuals

  http://www.USA.Canon.com/Cusa/consumer/standard_display/support

• How to restore the task on a HP Pavilion with Windows 7 bar?

  How to restore the task on ahp pavillion w/windows7 bar

  children was lost when I went online, it was gone help me

  The usual reason is that they getting by 'auto-hide '. Re it appears automatically when you run the cursor right down to the lower edge of the screen. You can then make a right click, left click 'Properties', then uncheck hide automatically.

• How to restore acer 5315 back to factory without cd Windows vista settings

  How to restore a computer Acer 5315 back to factory without cd to run windows vista

  We cannot tell you to do something on your computer or do not do.

  People come here and ask for advice, and we give it if we can.

  It is your choice as to if you follow these tips or not.

  We take no responsibility for the information provided.

  Acer makes your computer.

  I gave you advice from Acer.

  As you are concerned, here is a link to community Acer where you can ask them:

  http://community.Acer.com/T5/Acer-community/CT-p/en?profile.language=en&stoprd=true

  See you soon.

• How to activate the plug ins for WPM 11 on Windows Vista Home Premium 32 bit OS? __

  Cannot read dvd OMP. DVD will not auto play and got an error msg stating that the plug-ins have been disabled.  How to activate the plug ins?  I can't reinstall/repair WPM 11 under Vista.  I tried to update without success.  I ran sfc / scannow and there are no errors, found no errors or corrupted files.  Please indicate how do 11 WPM version 11.6002.18065 not work on my Vista Home Premium 32 bit OS! plug-ins have been disabled in 11 OMP

  I have installed a codec pack k - lite with no luck!

  Hi kikstart2,
   
  For the CD/DVD drive problem, try the following steps.
  1. visit the following Web site, click the "Run now" button and follow the instructions in the wizard to run the tool: http://support.microsoft.com/gp/cd_dvd_drive_problems
  2. once the tool is running, restart the computer.
  3. Insert the CD / DVD and check if it works very well.
   
  NOTE: There is no option to repair/reinstall Windows Media Player on Windows Vista.
   
  If the problem persists, restore the computer to an earlier time when everything worked well. To do this, try the following steps.
  1. Click Start, type system restore in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. click on choose a different restore point and then click Next.
  3. click on a date on which the issue moved not.
  4. click on next.
  5. click on finish.
  6. check if everything works well.
   
  For more information see what is system restore?
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How to download the update of platform 971644 for a windows vista operating system?

  I am installing messenger in my cimopputer and asks me to update the system with service pack 2, update 971644 platform. When I download it, it pops up a message saying "' this isn't System1 my the sytem", "

  Can you advise me on what to do?

  Hello

  1. What is the full and exact error message?
  2. what Messenger you trying to install?
  3. from which site did you download it?
  4. which version of windows vista are you using?
  5. don't you try to install the update through windows update?

  Please see the Sub articles that might help you in the installation of these updates.
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  Description of the update for Windows Server 2008 platform and Platform for Windows Vista update
  http://support.Microsoft.com/kb/971644

• How to restore the connection of the unit Editor?

  I found a typo in name of the editor, so I changed it in the Administration of the OS.  After the server rebooted, I can connect is no longer in the Administration of the unit.  I get database error messages when I try to log in.  The Subscriber is used as primary right now.

  So I guess I need to reload the machine completely.  My question is once I start the installation process and bring this machine on the line, will all the information from the Subscriber database or is there something I need to do when installing to get there.  I really don't want to recreate everything that is there, even if these units have not gone into production yet.

  There is also no backup because it is not in production.   I know that during the installation, I wonder if this is the first server in the cluster, don't I answer No. Although ultimately I want this server to be again the editor?

  Thank you, any help is greatly appreciated.

  Seth

  Well, if you want to go on the road to recharge then is the way to do it:

  (1) judgment of the Subscriber.

  (2) rebuild the editor, via DVD which will overwrite the hard drive. The DVD comes with the server. Do not try to use the CD "Recovery", just the right until the CD - version CUCM application (everything that sent you).

  (3) before installation of the Subscriber, make sure that you check the synchronization NTP on the (critical) Pub.

  (4) once you have rebuilt Editor, add the Subscriber in the CU Admin as part of the cluster as you normally would. Use the IP address of the server (recommended).

  (5) rebuild DVD subscriber you made to the Publisher. It should be added that the second node in the cluster, so make sure you have DNS and IP connectivity to all resources BEFORE the STEP 2 never happens.

  (6) once the two servers are running, check the ease of maintenance CUC and look at the State of the cluster.

  (7) then go to the CLI on both servers and run 'display tech hosts on the network '. The file/etc/hosts must have a loopback address and the two servers in cluster included in the file.

  (8) do a test on the ad user, check that it replicates to the Sub. Delete it the Sub, make sure that it removes the advertising.

  (9) to test the failover, then test failback on CUC Serviceability and put the editor back as being active.

  (10) you can also check the status of the cluster on both servers in the CLI - see the State of the cluster cuc is the command to do this.

  (11) if all that extracted, download your files to load licenses and make your configurations.

  (12) make sure that configure you DRS backups on a schedule (for two servers) and perform a manual DRS initial backup of both institutions.

  (13) I also recommend that you upgrade both at the last KNOWN for 7.1.3 which is 7.1 SU2 (3B). You can download EAC.

  What about MWI, there is a specific service that allows to MWI work properly. If this service has not started on the Sub for some reason, when it changed, then this is perhaps the cause. Get the servers rebuilt and go from there. Sound good?

  Hailey

  Please note the useful messages!

• How to restore the original partition after reformatting accidentally installing windows 10

  See the problem below. I can not get a USB stick formatted with FAT to be recognized by bootcamp or to download the drivers to continue.

  The problem occurred after that my son wanted to re - install windows 7 after that that he has been upgraded to windows 10 and utilities disk to reformat the drive hard windows installed.

  

  OS X Terminal, you can post the output of

  diskutil list

• Restore the connection opening SKYPE worm of office/desktop icon

  Skype opens automatically instead of going to the login page; How to restore the connection?

  Running Windows 7 with 64 bit

• How to restore the shortcut "run" from the start menu?

  I deleted the shortcut "run" in the start menu & to this topic, I searched but I have not found, how to restore it?

  Note: I am using Windows Vista HomeBasic SP2.

  Thanks ;)

  Right click on the button 'Start '. Click on properties. Click 'Customize... '. "in the tab Menu start put a check mark in the box 'run the command '. Click 'OK' and then 'apply '.

• How to restore the sites previously saved in the taskbar?

  I have remove the list of Favorites Favorites and accidentally deleted the site pinned to the taskbar above. Now my granddaughter is not there to put me straight. Can anyone help me to restore?

  * original title - how to restore the websites to the taskbar as they were before 10:00 this morning *.

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How to restore the old user profile

  I wanted to access some downloaded files that was stored in a temp folder. I did have access to this folder so I changed my folder option to be able to view hidden directories and files. He said that I had to be an administrator to do and I said OK. He then proceeds to change the attributes on thousands of files. In the end, I got is more access to my file and the original files, I became a new person, so to speak. I can manually view my old records, but I want to restore my old user profile, because this new profile is created a lot of problems with previously installed programs. I have two NTUSER. DAT files in my user C:\User\John folder. The dates are when the computer has been initially implemented 16/08/2012 and when the profile changes yesterday 07/02/2013. How to restore the old profile (from 16/08/2012)?

  Thank you

  Johnny

  Hi Johnny,.

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems with the restoration of the old user profile.

  1 have been connected as a standard user?

  2. What are thousands of files you're talking about if you want to have access to the temporary folder?

  This problem can occur because of corruption of the user profile.

  Method 1: delete the new NTUSER. DAT folder and check if it helps.

  Method 2: Perform the System Restore to an earlier date and check if it helps.

  System restore

  Answer to us if you are having problems with the user profile or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• BlackBerry smartphone how to restore the default version device software?

  Hi, I just update my software for device to BlackBerry Handheld Software v4.6.0.477 (EastAsia) BBB that OPTUS. But its totally different with the default version. I can't use Internet via Blackberry web browser using hotspot. It think there should be a lot of wifi and the application of 'download' and 'Instant Messaging' folder are lost! with the default version, when the first time I turn on the handset, there's MSN Messenger, Facebook, Myspace... etc in the folder "Download". Also I can't put more, my "Enterprise activation" required e-mail account, but I just that at the first time I've set up the handset, can I set up mail account everything I love. I'm not a business user. Anyone know how to restore the default device software version? If I can't restore back, anyone knows what version of the device software is better?  or how to fix this?

  BTW: I got my BBB a year ago. This is the first time I try to update the device software.

  Thank you very much!!

  BIS = BlackBerry Internet Service. Here is the OPTUS BIS site

  https://bis.AP.BlackBerry.com/HTML?brand=Optus

  See if you are able to connect to it and try what I suggested. What version of the software do you have on the camera before? You could try downgrading to this version. Different carriers have different versions of the OS, so I can't say what that yours was before the update.