HP PhotoSmart C310a market and stop button does not work.

Similar Questions

• Why push button and stop button does not work in the structure of the casing and buckle my VI? (code attached)

  I am a beginner. I'm trying to create a simple VI only switches beetween two types of signals like sine and triangle when someone press on the push button and at the same time, save the data in the file to my desktop. I also have a stop button which no longer record data.  Here are my questions and dproblems:

  1. when I press the button, it does not the true and false in the structure of the case so that I can see the triangle wave stops and begins the sine waveform table.

  2 when I press the stop button, I want the program still running, but the process of writing data in time the loop stops. I don't mind if the graph of the wave stops too but it would be better for the user to see the wave form is running, but the data will stop recording.

  3. Although the condition of the loop did not accept the local variable for the stop button inside the loop or within the structure of the case, so I put the button outside all the loops and the structure.  (I know that this is a problem, I do not know how to use a single button several times in a single code. The local variable did not work the world premiere? I have to?)

  4. the data file it creates hase a lot of lines and columns. I expect a time column and a column of mixed signals based on the push button amplititude this user press every time.  I did that with the acquisition of data and a sensor, it automatically gives me the voltage and time in a column. I tried 2D and 1 d and it has not changed anything.

  Thank you for your help

  

  

  Like you said, you read only your entries at the beginning, then whatever value they had before you hit run is worth to be seen by the rest of the code. Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.

  

  Simple code goes like this:

  • Containing the main code of while loop
    • Inside of the whole loop is all user interaction code or modify the code entry
    • Stop the terminal loop is attached to stop certain criteria or user selection of a stop button
  • Loop initialization above all if necessary
  • Closing referrals and communications, etc after all loop

  It's very simple code. If you want to watch in more advanced architectures that are scalable, Google "LabVIEW State Machine" or "LabVIEW producer consumer."

  If you are just starting, you should do a free training have the capabilities of LabVIEW.

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Satellite P20: Fn + F5 and TV-button does not work

  Satellite P20, keyboard of Windows XP SP2 problem.
  When I press Fn + F5, the computer does not show that earlier the different display options. TV button does not work also. I can change the different views with my nVidia Display Driver.

  My keyboard is OK, there is no dust or liquids. I have the latest update of the BIOS and Windows XP Service Pack 2. What program controls the functions of the keyboard in this case?

  How do I fix this problem?

  Hello

  Of course, you have deleted something or preinstalled on your own operating system. Without Toshiba has designed tools and utilities, it won't work. I put t know exactly which of them are to do this, but please try to install keys Dritek easy button util. /Sticky V1.008, E - key utility and Toshiba Hotkey Utility.

  I hope this will help. If this isn't the case, please write again.

• HP Photosmart all-in-one scan button does not work - Windows 7

  "After you have reinstalled C4750 all-in-one software on my desk, I am constant flashes of" Windows configuration... TryApp ".

  In addition, the printer Scan to PC button does more work. Scans can only be initiated from PC. It would seem that the scan key is not associated with an application to launch the activity.

  Advice on corrective action to both questions would be welcome.

  Hi cliffview,.

  Welcome to the HP Forums!

  I see that your photosmart is not scanning.

  Please let this first message error/loading, so that you can tell me exactly what he said.

  Can analyze you successfully since the HP Solution Center?

  Also what the printer said when trying to scan to the computer?

  Hope to hear back and thank you for posting.

• Bookmarks are missing and "back" button does not work.

  Suddenly, the back button doesn't work after upgrade to the latest version of Firefox, does not have the 'star' of the Bookmarks button and all my favorites are missing.

  This forum software that you have posted here with Firefox 12.0, not the latest version of Firefox 21.0. Another PC than the one you post on?

  If it's the same PC, see this:
  
  https://support.Mozilla.org/en-us/KB/websites-say-Firefox-outdated-or-incompatible#w_firefox-is-showing-the-wrong-user-agent

• Accessibility of the FN and Support Button does not work

  Hello

  If like many others, I also have problem with the support of the key. ECO button does nothing, as well as wifi and one button next to him who previously opened the toshiba bulletin board.
  I suspect that the problem is CCleaner which I put some Toshiba applications do not start at startup.

  Also if I press the FN button is not pop up the menu at the top of the screen even if I always change with her brightness level.

  Someone knows how to solve this problem WITHOUT restoring the system because I've done a few days back... :/

  Can you please tell us what laptop you have and that you always use the original pre-installed OS that you got with your laptop?

  In any case to get it works try once again this:

  Press Windows key + R > write MSCONFIG and click OK > click on the Startup tab and click enable all > OK.
  Restart your laptop and test functionality.

• OfficeJet 4630: brand new officejet 4630 with the problem of black ink and ok button does not work

  Hello! Today, I bought a new printer, officejet 4630 and it included ink cartridges in the box.

  ISET it upward as the sheet in the box said. After I had filled in date etc, I put in the ink (and Yes, remember to check it was compatible and take the Ribbon), then this message showed on the screen and still doesn't work:

  "Problem of ink cartridges. The following ink cartridges need to be replaced"and a black dot.

  The cartridges were brand new and came in the same area as the printer.

  I tried a reset (taking the power cord, wait 60 s etc) I saw in the Hp support you need to press 'ok' to get rid of the message before restarting. I can't press ok. It sounds right. I press any button.

  Suggestions? Of course, I can try it with a new cartridge, but to pay $20 for a new cartridge, when it was included in the box and should work is not correct.

  Hi @Candykuma,

  Welcome to the HP Forums!

  I understand that you ar get the error, the "problem of ink cartridges. The following ink cartridges need to be replaced"with your black cartridge on your printer HP Officejet 4630. I am pleased to address this error of cartridge for you!

  Please, try the steps in this guide, a "missing cartridge", 'cartridge problem,' or 'not compatible ink cartridges' Message error for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  If this guide does not solve your problem, please Contact HPtelephone support for further assistance, as the ink cartridges are under warranty. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• Stop button does not work.

  Hello. How to stop the vi by using the button on the front? I tried to use stop button inside while loop but when vi is running, and if I press the button on the front of the vi will not stop. I have to stop manually. My vi have two structures of the event. I even tried to leave buton. The button remains pressed, but vi is stopDoes the program wait until both executed for the button stop working.

  I have attatched different variation of vi.

  Thank you.

  You need only a structure of the event in your program.  Add an event to it press the button exit and stop your loop with the same.

  Delete the sequence structure.  It is not necessary.

  Move your init function VISA outside the while loop because you only need to do once.

  Move the VISA close outside the while loop.  You only need to do once.

  NEVER use the Labview output function.

• Send and reset buttons does not work on the contact form

  Hey, I use Flash CS3 and ActionScript 2. I created a simple contact page, inside a clip (because I got fading), I put the script in the main timeline, so not inside the animation, but the buttons send and reset may not respond. I checked the instance names and spellings are correct, here is the script I use:

  contact_tween.send_button.onPress = function() {}

  If (name eq ' ' or subject eq "" or message eq ' ' or by e-mail at eq "") {}

  Stop();

  } else {}

  loadVariablesNum ("form.php", 0, "POST");

  gotoAndPlay (211);

  }

  };

  contact_tween.reset_button.onPress = function() {}

  name ="";

  subject ="";

  message ="";

  email ="";

  };

  so, what I am doing wrong? any help appreciated, thanks.

  PS. contact_tween is the name of the movie I created to fade the page contact and exit.

  If you want to hire me to solve your problems, send email via my website (www.kglad.com).  free help continue the validation of this forum.

• HP 242 G2 model: model of Base HP 242 G2 (f2 and f3) button does not work

  I am not able to adjust the brightness of the screen of my laptop. Please suggest me how can I solve the problem mentioned.
  
  Thank you

  Hello:

  What model Intel processor is has your laptop?

  Have you installed the graphics driver?

• keyboard popping up during the call and previous button does not work...

  Why can't I write during a call? I tried other keyboards, but the result is the same...

  is there a solution?

  You have app smart key? If so, remove or disable the calls.

• the stop button does not respond when I needed to stop a program

  I want my labview program to stop when I press the stop button, but this isn't the case... stop button does not work... I have used a loop in which there is event structure n structures case... I have attached my file... so please help me...

  Hello

  In your code, this can be done by using the new event on "Stop" button when press it it will give a true

  Like this

  

• The plus sign next to my tab stopped working: when I click on it nothing happens. I tried uninstalling and reinstalling and it still does not work.

  The sign + to add a new tab has suddenly stopped to work earlier. I tried uninstalling and reinstalling and it still does not work. What can happen and how to fix it?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Why the STOP button does not stop this vi?

  Hello

  I took an example of Labview 2011 called "soul hollow period-Low Freq 1 Ctr.vi. This example vi measures one period, but, I want to measure the period over and over again, so I put it in a WHILE loop, but the STOP button does not stop at the vi.  Instead, I have to use ABORT to stop the vi...

  How can I stop this vi?

  Dave

  It does not replace the time-out.  The while loop is a separate beast from the meter reading.  You wouldn't want your loop due to always make you miss the error messages, would you?

  Usually just clear the error message of time-out on the counters.

  You get the message twice because the loop runs in fact twice.  The first time the stop button is read as false as soon as the loop begins.  Then you click on it.  At the same time that it takes 10 seconds for the timeout counter to occur - when he does it gives you the error.  Then, the loop runs again.  This time it reads the key stop as true, because you clicked on it during the timeout of 10 seconds of the last loop.

  A time loop allows everything inside to complete execution before the end, then you will have to wait for an another timeout of 10 seconds to occur which produces another error.

  Unless you need a measure of very, very low frequencies I set your time-out to a more reasonable number and simply erase the mistake if it matches 200474.

• Download in the market button does not work!

  Download in the market button does not work! No download by clicking the download button. Enough storage + reboots.

  I just restarted my computer and now I can download.

  Thank you!