Stop creating several points by a line
Hello, new to this and for some reason when I go to create a line or shape he keeps creating several end points as a fan for example when using the line, or even multiple of a boxes point etc start... any help? Can't find any content on it.
Sounds like your ~ key is stuck.
Tags: Illustrator
Similar Questions
-
Is it possible to quickly straighten the lines or remove several points in a line
Hi, sorry not too sure how Word of the question.
I'm studying for a master of science in geology and do seismic mapping. For storing my cards I exported the ArcGIS for I can bring together various and also outline maps. Then I exported the GIS maps in illustrator so I could try some of the smooth contours because they are extremely jaggedy due to the nature of the data.
Is there a way to quickly smooth lines or mass delete points that make up the lines?
I ask because I have 30 + cards and each card has perhaps 50lines with each line consisting of currently about 1000 points each...
If I can't find a solution I will probably end up drawing on the shape with the pen tool and smoothing just in this way, as it should be much faster, and then deleting as many points.
Any help much appreciated.
I am currently using Illustrator CS5 and have access to CS4.
Thank you
And if you're good with the rounded tool, the pencil icon drop-down, you might be able to use it to refine the contours as well.
It that they are actually fished segments, then you can select paths and use the brand
Adjustable rounded tool your specifications, but you have ti experimenting wih to see how it works.
Give him a little more work and you get this
-
Divide a line into several points
I see that I can use SDO_LRS. SPLIT_GEOM_SEGMENT to divide a line into one only point (and get 2 lines resulting).
However, someone at - it an idea how can I split a line, at several points, in several segments? I need to do for the number of lines, so a function or procedure would be nice as appropriate.
Thank you
Published by: ronnie-m on April 22, 2013 04:43Sorry for pasting quick and dirty, was a minimum on time and problems with my dev env.
Perhaps still not the best outline but hoping there more explanaition should be ok.
Concerning
Luke
select l.line_id, -- line line_id ROW_NUMBER() OVER (PARTITION BY l.line_id order by l.rowid ) -- optional sub id, to make submains unique in combination with line_id (guess this will be ordered sdo_lrs.CLIP_GEOM_SEGMENT(SDO_LRS.CONVERT_TO_LRS_GEOM(l.geometry ), branch_measure, branch_next_measure, 0.05) -- actual clipping, needs convert to LRS apparently, start end end branch measure from line l, -- rejoin mainly to get the geometry again ( select line_id, -- line_id branch_measure, -- measure of the branches (from CASE WHEN LEAD(branch_measure, 1, 0) OVER (PARTITION BY line_id order by branch_measure) branch_next_measure -- Analytical function LEAD will get the next branch measure form the following ordered records per line_id from ( select a.line_id, -- line_id CASE when -- CASE (assuming branch will touch only at one point) it will be either the start or the endpoint sdo_lrs.find_offset( -- of the branch that will TOUCH, we are checking this based on the offset which one is closest SDO_LRS.CONVERT_TO_LRS_GEOM(a.geometry), -- requires convert to LRS geom sdo_lrs.geom_segment_start_pt(b.geometry), -- if it is neccessary to deal with multiple possibilities we might better use a temp table to evalute better 0.05 -- TOLERANCE (all tolereance should be seen with respect to resolution of the data ) -- IF feasible, let spatial take care of the snapping < sdo_lrs.find_offset( SDO_LRS.CONVERT_TO_LRS_GEOM(a.geometry), sdo_lrs.geom_segment_end_pt(b.geometry), 0.05 ) THEN sdo_lrs.find_measure( SDO_LRS.CONVERT_TO_LRS_GEOM(a.geometry), sdo_lrs.geom_segment_start_pt(b.geometry), 0.05 ) ELSE sdo_lrs.find_measure( SDO_LRS.CONVERT_TO_LRS_GEOM(a.geometry), sdo_lrs.geom_segment_end_pt(b.geometry), 0.05) END branch_measure from line a, line b -- self join using main and branch that touches WHERE sdo_relate(b.geometry, a.geometry, 'mask=TOUCH') = 'TRUE' -- Should be replaceable with sdo_join + self join optimsation AND a.line_type = 'main' AND b.line_type = 'branch' union all -- union all to get the 0 measure (startpoint) in the subquery as the beginning of the first clipping segment select line_id, 0 as branch_measure from line union all -- union all to get the last measure (endpoint) in the subquery as the beginning of the first clipping segment select line_id, sdo_geom.sdo_length(geometry, 0.05) as branch_measure -- maybe better to use actual get measure form lrs endpoint but is the same if no spaecial measure are used from line ) ) b where branch_measure < branch_next_measure -- avoid duplicates (2 branches at same location on main (but also the last + 1 segment with last measure and default value 0 from LEAD and l.line_id = b.line_id -- join on line-id to reuse the geom (or potential other attributes from original lines ; -
Windows 7 not loading no updates fail after trying to create restore point
Hello
Previous similar questions have suggested that this may be related to Google Desktop. You have this installed?
Otherwise, unless you are certain that the update fails after you have created a restore point, have you tried to disable restoring the system temporarily, then by reactivating it after a reboot?
http://www.nirmaltv.com/2009/03/14/how-to-enable-or-disable-System-Restore-in-Windows-7/
Then try to apply the updates.
-
a table composed of several paintings of orinted line
Hi all
5.6.4 can we create an array consisting of several paintings of orinted line?
If yes how?
Thank you.
You could do a presentation grid each grid point has a table. It wouldn't really be a nested table.
-
Extract the first line containing "critical" or "E-Stop" of the last avalanche of line
Hi all
I'm watching some test systems by analyzing their audit files.
In this case, the platform generates several line 100 files in a specific folder. The code below is to find the last file and extract the contents of the last line of the last file.
Unfortunately, when an error occurs, the main software generates not only one entry, but an avalanche of lines [not a specific quantity of them, depending on how much the alarms are resolved] and I'm now ideas of how I could identify and the contents of the first line containing "Criticism" or "E-Stop" to exit from this avalanche [line avalanche started 22.27].
As an example, the above program is extract the yellow line, while I need information from the blue line.
Any idea on how I can do this?
See you soon,.
You can add this snippet to the top of your existing code. I changed the indicator table to a table so I could highlight the line.
-
help I am trying system restore and it says I have no restore points and will not let me create restore points
* original title - find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting *.Hello
1. what exactly happens when you try to create a system restore point?
2. you receive an error message when you create system restore point?
3. what operating system is installed on the computer?
In the event that you use the Windows 7 operating system you can follow the steps below and check if the problem persists.
Method 1:
Step 1:
Locate the service associated with the restoration of the system or Volume Shadow Copy Service is started after the computer is restarted. This service can be stopped by some viruses as well, so you can try to run a scan of your computer.
To check the service
(a) click Start
(b) in the start search box type Services
(c) click on - RUN as ADMINISTRATOR
Check if the below mentioned services has mentioned State and type start.
Shadow copy volume started Automatic\Manual
Step 2:
Also check the dependency services that are required for the System Restore Service run.
To verify that double-click the service, and click the Dependencies tab.
This service must be started before the restore point is created automatically or manually.
Method 2:
Try disabling the firewall and windows temporarily on the computer security software and then try to create a system restore point and check if that helps.
Follow the articles given below to change the settings for the firewall and security software settings
Understanding Windows Firewall settings
http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings
Firewall: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note:
If you are able to perform the system restore after you disable the security software then you may have to contact the software publisher for the security software by disabling the firewall and security software is a potential threat to the security of the system.
-
Not getting not automatically created restore points
Original title - help with Restore Points
I recently changed the size of my drives C and D using a utility partition.
He stopped the automatic creation of Restore Points. I noticed this because the restore disk cleanup deleting data/shadow copies running did not clearly get out any space on my hard drive. I run Disk Cleanup about every 10 days.I tried to re - turn on this; but I'm not able to do. Here's what I did:Under Task Scheduler, I have a set trigger in place to create a point of restoring daily at 14:00. My computer is sometimes off in the morning.The State of this trigger is activated. This is used to create regular restore points.I disabled the trigger to create a restore at startup a point a couple of years. My system has been the creation of restore points every day with the other Tirgger at 14:00 in Task Scheduler.Question No. 1: Would it be useful to delete and recreate the trigger for 14:00?Question 2: I went into control panel – system and Maintenance – System – the System Protection window and I am able to manually create a restore point.I can see my drives C and D on the list. Maybe I think too much about things and read things correctly; but I feel like it's better to ask this question:* Should I put a check mark next to my D drive or my C drive?I ask this question because the title says in this little window of the System Protection: "create restore automatically on some points:So, does that mean that only check box for drive C indicates a place where the restore point will be created physically ("on drive C"), or it means to a restore point to data on the C drive will be created? Is this clear?Right now I checked C drive and D drive and not on the list. I'm assuming he's asking me which drive I want backed up.(I don't know where the backup restore points are saved/located to go look for them.)I see that the last restore point was when I did it manually. The task scheduled for 14:00 does not appear on the list in this little window. However, when I check the history of Task Scheduler, it shows that the task has been completed.Question 3: Is something wrong with this list? I also check to see if the restore point is created at 14:00 from the task history shows that this has been done?I would appreciate help with this. I put a reminder on my calendar to create restore points manually. But something does not work with my system; and I want to fix it.KenRestore points are made. Yesterday, after posting the original message/questions, I changed the schedule of the trigger to make a restore point. Maybe something jogging in the system in place. (Not exactly a technical term, I know.)
Today, I checked the disk cleanup and had much less free space of a few days. I ran clean it point restoration/cliché and cleared space. Then I checked the control panel – system and Maintenance – System – the System Protection window and saw that the restore point the most recent was created today.Then...Question 1: Maybe change the relaxation time makes a difference.Question 2: Place a check mark next to the C drive, which is the drive that you want supported during the restoration.Question 3: Everything is fine with this list. -
Original title: Create Restore Point will create new not a point of restoration after upgrade to Vista Ultimate in Basic
I get the error message. "Mgr. task is damaged or has been tampered with. 0 x 80041321."when I try to create a new restore point manually. But it appears automatically when I do a backup of files and when I planned for it, for in the system settings. How can I fix this problem
HelloThanks for posting your question in the Microsoft Community.I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
Please follow the methods and mark the question below:Method 1:I suggest you try the steps mentioned below.Steps to re-create the Task Scheduler:
a. Click Start; in the start search type regedit.exe and press ENTER.If you receive a consent prompt, click Yes.
b. navigate to the following location.
HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.
c. save the changes and then close the registry editor.
Now check if the Task Scheduler works.WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Method 2:Step 1:I first suggest you to check if the Volume Shadow Copy service is running.a. Click Start, type Services in start search. When the page is open, look for Volume Shadow Copy service.b. right click on the Volume Shadow Copy service (VSS) and check whether it is started.
c. If it is stopped, select start or restart.
Check if you can try to create restore points after starting the service
For more information, see the following link:Step 2:
If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.Disable the antivirus software:
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareImportant note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Step 3:You can also try to remove the job from the location:C:\Windows\System32\Tasks
How to find which task is damaged or altered.a. Click Start; type cmd in the start search. List programs, right-click on cmd and run as administrator.
b. now run the following commandschtasks/query | findstr /i
SearchERROR: The task image is corrupt or has been tampered with.
ERROR: Task cannot be loaded: the task nameFind the name of the task, try deleting the task name, and then try to recreate.See the link below that solves your problem.
a. Click Start, type Task Scheduler in the start search box and then click on Task Scheduler in the list programs.If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
b. the component shares of the Scheduler dialog box, click on create a task and check.
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly. -
RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.
Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.
Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.
Checked VSS, Taskscheduler and other services are runnig
Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen
Solved
It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.
-
How to create several classes of cascade?
Goal: Create the button to start and stop the service.
Situation: One button works.
However, whenever I click on another button, the button does not work.
Question: how to create several classes of cascade?
or something wrong in my code?
Mini code:
Calls a CPP QML.
ApplicationUI::ApplicationUI (bb::cascades:Application * app): QObject (app)
{
QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);CameraWrapper * wrapper = new CameraWrapper();
QML-> setContextProperty ('wrapper', wrapper);
AbstractPane * root = qml->
() createRootObject;
App-> setScene (root);
}And then, QML calls another RPC.
import bb.cascades 1.0
{Page}
{Of container
layout: {DockLayout}
}
Button {}
text: qsTr ("Start")
onClicked: {}
wrapper.startRec ();
}
}
Button {}
text: qsTr ("Stop")
onClicked: {}
wrapper.stopRec ();
}
}
}
}The main CPP:
#include "cam.hpp".
using namespace bb::cascades;
{CameraWrapper::CameraWrapper()}
int CameraWrapper::startRec() {}
This button works.
}
int CameraWrapper::stopRec() {}
This button does not work.
}
The main.hpp
Class CameraWrapper: public QObject
{
Q_OBJECT
public:
CameraWrapper();
Virtual ~ CameraWrapper() {}Q_INVOKABLE
int startRec();
int stopRec();
};Thank you for your attention,
Finally, we use the thread to solve the problem.
Solution:
loopWrapper (void * test) {void *}
CameraWrapper * a = (CameraWrapper *) test;
a-> startRec();
return null;
}setFlagWrapper (void * test) {void *}
CameraWrapper * b = (CameraWrapper *) test;
b-> setFlagFalse)
return null;
}void * CameraWrapper::setFlagFalse (void * arg) {}
exit_application = false;
fprintf (stderr, "Flag changed to false\n");
return arg;
}void CameraWrapper::runLoop() {}
pthread_create (& thread_a, NULL, & loopWrapper, (void *) this);
}void CameraWrapper::runSetFlag() {}
pthread_create (& thread_b, NULL, & setFlagWrapper, (void *) this); -
ILLUSTRATOR - when I change the thickness (outline/stroke) (in points) of text/lines/etc by using the icons of arrow (upwards or downwards), the thickness of the line jumps instantly to 1000 pts. How can I adjust the settings to make this feature work, because I really need in many situations. Thanks in advance!
koenk,
The current pastor of the corrupt file bug/preferences units seems to be:
(1) delete your preferences HERE (close HAVE and press Ctrl + Alt + Shift / Cmd + Option + shift during startup).
(2) ensure that the parameters English (United States) system locale and the decimal point is. (dot/full stop, no, (comma) when the machine is restarted,)
(3) launch HAVE again and see if the subject is cured.
You can see a long discussion here:
-
Does anyone know a shortcut for create/exit points exactly 1 second (or no preset amount) in the source monitor apart?
For example, I want to choose a second clip sections of 5 minutes, but do not want to move the points of entry/exit with the mouse in the hand. Would also be useful to several clips where 1 s/exit points have not been established
Thanks for all the answers!
Go to preferences and on the set of forward/reverse reading pane, for the number of images you want to move the read head (in this case 60, two seconds):
And click OK.
Then put your first marker, then type shift + right arrow to move the playback cursor, the number of images that you entered.
If you type shift + left arrow , it will move the playback cursor backward the number of images.
MtD
-
[4.0 AI2] Without stopping at the points of stop/does any debugger
When running the debugger in SQL Developer is the debugger immediately connects then disconnects after executing the code WITHOUT stopping at breakpoints or the debugger crashes and only what I choose is to end or for a break.
The first question that happens much more frequently. I'm trying to debug a procedure in a package where the there are several breakpoints in the code, including at the beginning. After checking my tables in which the procedure is on before and after running the debugger, I can see that the data has been changed so that the debugger ran through the process and run the code without stopping. I have checked the very simple code where the code of breakpoint was called and had the same result.
IM using 64 bit Win7-
JDK - 1.7.0 day 40
Output:
CHARGE TIME: 329UsersCache.fillIn (time) = 4 ret == null? : true
UsersCache.fillIn (time) = 3 ret is nothing? : true
tableAlias.cardinality () == 0
UsersCache.fillIn (time) = 4 ret is nothing? : true
UsersCache.fillIn (time) = 3 ret is nothing? : true
tableAlias.cardinality () == 0
UsersCache.fillIn (time) = 4 ret is nothing? : true
tableAlias.cardinality () == 0
tableAlias.cardinality () == 0
tableAlias.cardinality () == 0
The debugger output:
Connection to the database layout Pro.
PL/SQL execution: ALTER SESSION SET PLSQL_DEBUG = TRUE
Running PL/SQL: CALL the DBMS_DEBUG_JDWP. CONNECT_TCP (' * ',' *')
Accepted connection of database on the debugger port *.
Running PL/SQL: CALL the DBMS_DEBUG_JDWP. DISCONNECT()
Process is complete.
Disconnecting from the database layout Pro.
Debugger disconnected from the database.
Thanks in advance,
James
Some basic questions.
Have you compiled for debug?
Certainly are breakpoints on lines of code? He has had problems in the past where line numbers are off by one that looks like code is actually a blank line, or a statement. Try several breakpoints on consecutive lines to be sure.You can also set the preference tools | Preferences | Debugger | Start debugging Option to ' get in '. That should be limited to the first executable line.
-
Create several clones at a time
Hello
I want to prepare the number of virtual machines (i.e. clones or pictures) of the gold statue.
I develop my own UI where I'll be selecting one of the images existing gold. I will mention a number of clones that I need. When I click on the button, I'll be citing vSphere appropriate web services API to create clones.
Can someone tell me what do I want to accomplish is feasible or not? Can we create several clones at a time? And that too the use of web services?
Take a look at CloneVM_Task() , you can certainly deploy several clones at the same time, but you probably want it saving 3-4 as it's pretty resource, especially against your storage space.
=========================================================================
William Lam
VMware vExpert 2009
Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/
VMware Code Central - Scripts/code samples for developers and administrators
If you find this information useful, please give points to "correct" or "useful".
Maybe you are looking for
-
I need upgrade of Lion but do not have to install the latest version of El Capitan (10.11.6). How can I upgrade 10.11.3 instead?
-
Re: Question for Toshiba Satellite A100-332 recovery
I want to format and reinstall windows to its plant as its really slow-running state. I do not remember to have a recovery on buying cd and said that I just need to push an F key on boot up, file recovery is on the hard drive. Is this correct?
-
My keepps wireless adapter window line to hit me back it but after a few minutes I connection loose again what is happening
-
I use the fingerprint and the 4-digit lock screen functions on my Z5c. For some reason any, even if I have the option to put 4 digit lock screen, I can slide up and it will unlock. When I go to the Security menu and click on screen lock and enter my
-
Tethering with the Blackberry Bold 9900 blackBerry smartphones
Hello, I just bought the blackberry bold 9900 and asked whether it is possible to share my 3G connection with my iPod 5th generation?Thank youGood bye