[4.0 AI2] Without stopping at the points of stop/does any debugger

Similar Questions

• My windows dvd maker Burns single photo slideshows on dvd and wont burn your movies on DVDs without stop, does not burn even the windows sample videos

  my creation of windows guard dvd stop responding and stops whenm I am trying to burn a video on dvd. the only thing that it will burn is a photo slideshow

  a different view on the same subject, I downloaded the recommended free dvd burner called wondershare and it works fine. I think that one of many tbhe updates of windows, I had since the last time I was able to burn a video dvd, must have corrupted, that of why I wanted to reinstall it but can't find a download on the windows software download for it

  =======================================
  I don't think DVD Maker can be reinstalled, but at least
  you have found a solution.

  If you happen to have Vista Movie Maker 6.0, you can
  disable the filters inside and creating DVDs should be affected.
  Reach... Tools / Options / Compatibility tab.

  See the following link:

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions
  (scroll way the lasf FAQ):
  «What can I do if am having problems with video filters in Windows»
  DVD Maker? »

  See you soon.

• Wallpaper from the point of view does not work on the iPhone 6

  Hello, I tried to set a wallpaper wallpapers apple and camera and my point of view option is disabled. And tried the hard reset and software update.

  

  Make sure that the settings > General > accessibility > reduce Motion is set to Off.

• I bought Adobe Photo and managed to install the App. It shows a black screen Uni without options below the cloud creative logo. Any help?

  I started talking to someone earlier and had to leave before they could help me a lot. I tried to open another cat, and he repeats to me restart my browser, even though I have several times. They said they would leave it as an open ticket, but I can't find any ticket system to respond or interact with.

  My problem has been resolved - I logged on via a different browser adobe support to return to support cat. With their advisor, I had to do a right click on the desktop select "configure switchable graphics" and assign them to "power saving mode" and it worked. When I restarted Adobe CC it worked.

• May not start XP all we see is the arrow on the pointer on our screen... can not restart even in safe mode

  compuer ran great.
  do you have a small email campaign using mailchimp marketing
  everything was going well and next day compuer will not re-start.
  all we see is a blank screen and the arrow on the pointer.
  It does not restart in safe mode. When it goes to safe mode, we see is safe mode on move it left and right and some scrambled words on top. Thank you, Joe

  Joedir,
  Go through this post and make sure that you have tried all the listed items: http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e

  If you still have a problem, then try starting mode safe mode with command prompt and run the following command: chkdsk/r http://support.microsoft.com/kb/315265 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cursor without stopping text when pointed at it scalable

  Failed to stop the rolling when text cursor pointed at it. This works well on other browsers. Using the reset with the disable or enable add them on the scrolling text to stop with the cursor as it should, but once you close Firefox and return that it stops working. Even when the computer is restarted or shut down. I tried to use the restart of Firefox with Add ons disabled and also uninstalled Firefox 27.0.1 and reinstalled without success. The operating system is Mac osx Mavericks.

  John.B
  

  Hi cor - el,.

  Just edited this post. Did post still not working after trying all that was recommended but after restarting the Mac it seems to have come good. I am just hoping it stays like it. Thank you for your help very much appreciated.
  

  John.B

• My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Error 80070020

  windows update

  My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Get an Error 80070020, I am unable to find out exactly what to do. Every day for a few weeks he tries to install the updates and then stops to install but always ends up coming back. Can you help me please?

  Hello

  read thisL

  Windows Update Error 80070020

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070020

  and also see if this helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• The call of a Subvi without stopping the execution of the main thread

  Hello everyone, I have a rather simple demonstration VI, which opens a menu where the user can call a few screws, signal generation, reading and analysis, each contained in a Subvi and with their own front panel and chart controls. The idea is user just click a button and the required Subvi is in charge, I use a structure of the event to ease.

  Problem is, after I opened an option, said Subvi hogs the thread of execution and does not allow for new bodies until it is closed (this is inside a while loop it is so logical, I guess), the queue of events and the next before Panel charges only after that I have stop the Subvi. I would like to be able to simply open the front panels and let them run in parallel, without them in the meantime another at the end, is it possible?

  natasftw is right.

  A high school is a "hole" in your main panel.  You "insert" a separate VI in this 'hole' and then you see the Panel of VI inserted through the hole and mouse clicks through the hole of the Subvi below.

  You will need to run the Subvi separately, even if - by inserting just can't run.

  Aynchronous call will begin a Subvi running and then return to the calling thread with the Subvi running in parallel.

  You can then insert the Subvi in a secondary, or let it have its own window, as you choose.

  There are examples of both techniques.

• PCI-6601 reading pulse without stop the meter

  Hi, the problem seems to be simple, just for the moment that I did not came up with a reasonable solution. I'm programming the meter 6601 for the following using my own routines of driver (in visual studio 2008 C++) for read/write registers. I follow carefully the DDK examples. I started with the example 1 and 4, and it works very well and now I have to somehow come up with the following code:

  1. I use the signal specific to 10 MHZ external H. MAser as input to the meter.

  2. I start the meter with arm software and am constantly read the values of the counter.

  3. I want everything just to read a single pulse (1PPS) and make the absolute time of the counter in time synchronization UTC. He should simply give me the meter reading of the rising edge of the PPS signal but after that it should be possible to read the counter as usual by reading the save save values, so read pps without stopping, nor anything in the registers of meter loading or b, simply give a pulse reading and continue even as 2...

  Any suggestions?

  Hello

  problem solved, but anyway, to all those who might have a similar task, here are the raw extract of what I've done (code names and function are similar to the DDK, but has nothing to do with the DDK)

  Sub yourclass::yourppscountfunction()
  {

  m_stopPPS = false;
   
  first reset internal values
  card1. Write_G01_Joint_Reset_Register_G0Reset(); reset the counter 0
  card1. G0_Reset_Registers_Values (); Reset internal values
  Disarm
  card1. Write_G0_Command_Register_Disarm (true);
  load the initial value of 0
  card1. Write_G0_Load_A_Register (0x00000000); counter should start with 0
  card1. Write_G0_Command_Register_G0_Load (); tells to load the initial counter of a register value
  Set the source to time external base
  card1. Write_G0_Input_SelectRegister_SourceSellect (1);
  Select the axis dedicated to door sellect (default value in this case, PFI_38)
  card1. Write_G0_Input_SelectRegister_GateSellect (1);
  card1. Write_G0_Mode_Register_Gating_Mode (2); rising edge Gate
  card1. WriteIO_Config_Reg_Pin36_Select_out(); Configure the PFI_36 PIN to drive the output
  card1. Write_G0_Mode_Register_Output_Mode (1); We're out the TC, connect to a counter2 to count the animated buttons
  Configure the PFI_36 PIN to drive the output (not made here)
  card1. Write_G0_Mode_Register_Trigger_Mode_For_Edge_Gate (3); Gate not used to start or stop
  card1. Write_G1_Command_Register_Synchronized_Gate (true);
  card1. Write_G0_Command_Register_Up_Down (1); counting direction up
   
  card1. Write_G0_DMA_Config_Register_DMA_Enable (true);
  card1. Write_G0_DMA_Config_Register_DMA_Int_Enable (true);
   
  arm the meter
  card1. Write_G0_Command_Register_Disarm (false);
  card1. Write_G0_Command_Register_Arm (true);
  WRITE THE COUNTER VALUES
    
  card1. G0_Write_Mode_Registers();
  card1. G0_Write_G0_Input_Sellect_Registers();
  card1. G0_Write_G0_DMA_Config_Registers();
  card1. G0_Write_Command_Registers();
  while(!m_stopPPS)
  {
  PeekAndPump();
  now loop to see if measures available PPS, if yes, read them and display
  If (card1. Read_DMA_Status_Register_G0_DRQ_Status()) //if that something saved
  {
  unsigned long int counterValue1.
    
  int HWSaveorSWSave;
  HWSaveorSWSave = card1. Read_DMA_Status_Register_G0_DMA_Readbank();
  if(HWSaveorSWSave==1)
  {
  counterValue1 = card1. Read_Save_Register();
  m_editPPSreading = counterValue1 * 1.E-7;
  }
  on the other
  {
  counterValue1 = card1. Read_HW_Save_Register();
  m_editPPSreading = counterValue1 * 1.E-7;
  }

  This-> UpdateData (FALSE);
  } //if something red

  } //while
  card1. Write_G0_Mode_Register_Gating_Mode (0); gating disabled
  card1. Write_G0_DMA_Config_Register_DMA_Enable (false); Disable dma
  card1. Write_G0_DMA_Config_Register_DMA_Int_Enable (false); Disable interrupts
  card1. G0_Write_G0_DMA_Config_Registers();
  card1. G0_Write_Mode_Registers();

  } //after you might normally read the meter (PPS values are added to playback as UTC offset-> not done here)

  to stop playback PPS and continue as normal counter where the values are simply red of the SW save registers
  Sub yourclass::yourstopppscount()
  {
  m_stopPPS = true;
  }

• Disabling update the configuration file without stopping the VI

  I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

  I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

  I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

  Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

  Thank you very much.

  There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  

• Cannot move or leave the pointer to stop in a place using Microsoft Wireless Mobile Mouse 6000

  Original title:

  I can't find a way to get the mouse move or allow the pointer to stop in place so I can use the keyboard correctly.

  Hello

  1. what version of Windows is installed on the computer?

  2. what program are you using when the mouse starts to jump around?

  3 are you aware of any changes made to the computer, before the show?

  Assuming that you have installed on the Windows 7 computer, follow these steps.

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Check out the following link.

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  See also,

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  I hope this helps.

• Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello
  Try this:
  http://support.Microsoft.com/kb/306318
  b Eddie

• Clean shutdown for EqualLogic PS6100 without stopping the host/iSCSI initiator

  In fact, I've known the procedure on how to stop the Equallogic PS storage. But I have a question as well as the procedure.

  Do you really need to stop the iSCSI initiator or the host connected to the storage before you shut down the storage controller?

  Because we move the Equallogic box on the rack on the other. I just want to stop the Equallogic without stopping the hosts.

  Hello

  The hosts are connected to some other storage that you want to keep as you move the table EQL?  If you stop the storage, it is similar to pulling on a hard drive in its operation.  Most of the time nothing bad will happen.  But all entries that did not allow the storage is lost.   For applications such as SQL or Exchange is not something you want.

  If you need to keep the server up, stop all applications accessing the volumes, then disconnect all EQL volumes first, and then stop the EQL table.  Will be served waiting for the written word.

  Kind regards

  Don

• How to change the mouse setting to stop automatically by selecting a video on youtube when the pointer over video

  whenever I leave the pointer over a video for more than a few seconds without moving, it automatically selects the video and go to the page with the video ready to play

  Click the Start button and click Control Panel.

  Click ease of access Center,

  Then make the mouse easier to use,

  

• APEX 4.2 by aligning the number of the point Stop and Start Grid Layout

  My APEX application is moving from 4.0 to 4.2.  I have a problem with alignment (justified left margin) of Stop and Start Grid Layout of items that have a border around them.  Earlier, I had a problem with the border itself not appearing is not in the application of 4.2.  I managed to solve that with a workaround by adding inline code in the CSS of the page section: #P23_OFFICE_START_TBL {width: 682; border: 1px solid #369; margin: 5px;}. This has created the border I needed, but there are 2 Stop and Start Grid Layout products that are indented and not in line with the previous line border.  I tried a number of different things, but none of them have worked.  This seems to be a very simple matter to fix, but I'm having a difficult time.

  I tried to put the item in a different grid, which corrected the indentation, but then I lost the border around the element.  It seems that the CSS code above does not work on the new grid.  I also tried to set attributes such as margin-left: 5px; float: left; Clear: left; float: left in the CSS code, but that didn't work, too.

  Any suggestions?

  Thank you

  Ajay K

  I deleted and added the points Stop and Start Grid Layout not lining up properly.  It worked.  Apparently, the upgrade from 4.0 to 4.2 did not handle/convert these elements correctly.  Deleting and adding their backs has solved the problem.