Stop questions, error task host is running and giving orders to the programs.
Original title: interference of the task host?
When I close my computer that he told me that the task host is running and controls giving programs or something like that. It's really interfere with the performance of my laptop. Can you help me?
Hello
2. What is the exact error message that you receive?
There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2
http://support.Microsoft.com/kb/975777/en-us
http://Windows.Microsoft.com/en-us/Windows7/view-CPU-utilization-and-other-performance-information
http://Windows.Microsoft.com/en-us/Windows7/see-details-about-your-computers-performance-using-Task-Manager
Tags: Windows
Similar Questions
-
Task Manager, regedit, run and command prompt are all disabled on my computer.
Task Manager, regedit, run and command prompt are all disabled on my computer. Is it possible to fix it because it allows to launch on a network?
Hello(1) have tried to start in Safe Mode, Mode safe with network...?(2) remember to make changes to the computer before the question?See the methods mentioned below and check if that helps.Method 1:To start the computer in safe mode with networking
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=trueScan your computer for Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2:How to remove a computer virus?
http://Windows.Microsoft.com/en-us/Windows7/how-do-i-remove-a-computer-virusSee also:Microsoft Security Essentials
http://Windows.Microsoft.com/en-us/Windows/products/security-essentialsHope this information helps. -
I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?
You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.
Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.
Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro
Gene
-
Original title: I get a box indicating the dell support center has stopped working and microsoft has closed the program in order to seek a solution, then nothing happens, and the box comes up again and again?
I get a box on screen telling me that the dell Center support has stopped working, and microsoft has completed the program to check the solution
It happens every 5 minutes but never comes up with a solution
Hello
Refer to this article and follow the steps to help solve this problem.
Dell Support Center has stopped working error appears
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832 -
my pc CPU fan runs very strongly & the processor running at 100% for all the programs I opened. DO NOT KNOW IF IT IS A VIRUS IN THE PC WAS WORKING FINE A FEW DAYS AGO. How can I solve this issue?
Hello
You did changes to the computer before this problem?
Step 1: Check if the problem persists in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
Understanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
Procedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427I would also refer the below article which may be useful.
The CPU utilization reaches 100 percent when you run programs after you install Windows XP Service Pack 2
http://support.Microsoft.com/kb/890582 -
Dw20.exe is running and take 50% of the time CPU
Dw20.exe is running and takes 50% of the time CPU when no other program (user) is running on my computer vista laptop. Is this normal? I wonder if it's one of the reasons why my computer was slow.
Hi ykxx,
Welcome to the Microsoft Answers site!
First of all, you can try to access the link, the link below and try to disable the Application Error Reporting tool
Description of the Windows error reporting tool (Dw20.exe)
http://support.Microsoft.com/kb/841477
Method 2: you can try to create a new user account and check if you can solve the problem.
To create a new user profile, follow the steps:
1. open user accounts by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
2. click on Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3. click on create a new account.
4 type the name that you want to assign to the user account, click an account type, and then click create an account.
If you are able to resolve the problem and then copy files to the new user account
For more information, you can consult the following link to resolve the damaged user account:
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Method 3: you can also check the following link and run a security scan online on your computer to remove the infections of viruses on the system.
http://OneCare.live.com/site/en-us/default.htm
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I was working in adobe muse, and suddenly I close the program. UID error: 5956. As I can get it back what worked? Do not hit to save my work. Help, please
If you say 'no' to recovery, all changes made since the last Save will be lost.
The error appearing on the launch, during recovery, says something so bad when you are already working with Muse and rather than saving a problem in your Muse .muse file set up an error message and stop.
If you do not already revived and selected 'no' to recovery, we are able to recover manually you are unsaved work and fix the problem in the unsaved changes that is causing the error.
Please send us the .muse file and the folder "Recovery" at "~/Library/Preferences/com.adobe.AdobeMuseCC.2015.0/Local Store" at [email protected] as well as a link to this topic for the context. If files are larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing.
-
Whenever I try to open or run all I get - choose the program you want to use to open this file and its default Adobe Acrobat and he always answers this file type is not supported. I can't open anything on my desktop, tried to reinstall Java, and even in my computer it asks me to choose a program to open it. Help! I don't know what is happening!
* original title - try to refresh, to run or install anything whatsoever, and it will not open executable files.*
Hi LisaPisani,
(1) did you the latest changes on the computer?
(2) when was the last time it was working fine?
Method 1
See the Microsoft article below and try the steps mentioned, check if it helps.
How to change or choose the program that starts when you double-click a file in Windows XP
http://support.Microsoft.com/kb/307859
Method 2
If the previous step fails then I would suggest that you perform the system restore point when it worked very well and check if it helps.
How to restore Windows XP to a previous state
-
Security
I need to put in place the security of the laptop running finance and don't know the programs and the finest details of it. I need to buy, sell and subscribe. I need to use programs such as paypal also.You have antivirus installed? If this isn't the case, I would install Microsoft Security Essentials (MSE) for you antivirus protection.
http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
Windows 7 is really quite safe as is and does not need a lot of work to ensure. There are a few FixIt who can put in place and ensure that it is set using the recommended security settings.
http://support.Microsoft.com/mats/windows_security_diagnostic/en-us
http://support.Microsoft.com/mats/Malware_Prevention/en-us
http://support.Microsoft.com/mats/ie_performance_and_safety/en-us
Just run the fix it is and install MSE and you should be sure resonably.
-
Issue. I have CS5 on Windows desktop 8.1 which I'm unable to update due to the repeated download error (no error number). I uninstalled and reinstalled CS5 but the same error occurs. I have same CS5 on Windows 7 laptop which seems to be up-to-date. What is the problem please?
Hi Peter,.
Please see the updates
Hope that helps!
Kind regards
Sheena
-
I live in a rural area that does not have consistent internet access. questions: what I have to have internet access to work with the ambient light and photoshop or is the program downloaded on my computer while I did not need to be online?
That is, the work programme is located in my computer or is it online?
Thank you.
adobe (and perpetual license) subscription programs are installed on your computer. You need to be online for installation and activation, and then you must be online periodically thereafter.
with a monthly subscription, one time every 30 days is necessary to maintain your activation. for an annual subscription, all 91 days once is enough. These checks online to check your license status.
-
I downloaded the trial version and then I bought the program and bought back the redemption code, but when I run the program it says: you are trial version has expired. When I use the redemption code once again, he said: this code is already in use.
What should I do?
FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?
-
Windows Media Player Movie I can play a movie on a secondary monitor and leave orders on the primary
OT: Windows Media Player Movie
Can I play a movie on a secondary monitor in Windows Media Player and leave orders on the primary?Hi Andy8167,
Yes, you can play the movie on the second moniter. I suggest you to see the following links:
Move windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitorsWork and play better with multiple monitors (applies to Windows Vista)
http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors -
"Stop IMAQ" takes 10 sec to run and consumes 100% of CPU
Hi, I'm calling IMAQ stop to put an end to an acquisition, but it consumes 100% of my CPU and takes 10 sec to complete (all your 100% CPU). In our application, we have start and stop the device regularly, and that's exactly when the user wants the program is interactive, if this delay of 10 seconds is great irritation to them.
My setup is - camera scan online Dalsa Piranha, RT 9 running on a desktop PC (it is compatible according to the test), PCI-1429 cameralink map.
Any help or comments welcome.
Thank you.
Ah, I managed to solve it, but first, here are the answers to your questions:
With the help of Stop and then close or simply close makes no difference. The judgment takes so long that I just used a probe before and after on the cluster of error and with function of probe of 2009 timestamp I could easily see how long it took. For a more detailed analysis of the time I use the United States available with RT timer
Anyway, the way I solved the problem was ensuring that I stop acquisition BEFORE the clock of the camera line is stopped. So stop IMAQ probably wait for the end of the current frame before returning - and if the clock of the line stops at Midway through a framework (as was the case), a timeout of 10 seconds causes probably Stop back later.
The clock of the line is powered by an acquisition of data (via RTSI) card and I simply closed the session to this counter after calling IMAQ stop. Data acquisition interface is not displayed in the example above, as it is coded in an another vi.
Thanks for all the help.
-
XP stopped working - error message mentions rundll32.exe and activation XP
So in the middle of downloading something last night my Avast anti virus kicks and says something about the files looking for suspects. Immediately, I cancelled the download and was 99% sure that I had deleted all the files wrong. This morning, however, when I turned on my laptop computer it wouldn't let me load XP and came up with an error message of not being able to read the license for windows and needed me to activate it. When I click on 'no' my desktop background loads, but nothing happens when I click 'Yes', load of my wallpaper and a box will appear where I presume he was telling me how to activate it, only nothing loaded. I guess that he should be connected to the internet which, for some reason, he did not and I had no access to anything else; No start button, no task manager, Control Panel No.
Luckily my laptop has been implemented with a dual boot in order to start and use the partition with the original OS that came on the laptop (Vista) to access the XP drive. As the error previous message stated rundll32.exe they advised me to replace it and and then scan with Malwarebyte s Anti Malware and removed all infected files that came. But nothing has changed.
Could I have deleted something that is used in conjunction with the rundll32.exe? If Yes, what? And is there anyway to get it back?
I have read similar problems online and advice has been to start the XP cd to repair or reinstall, but how am I wanted to do when I can not load even XP to access the CD drive?
Can anyone help?
Florie
Hi Florieness,
· What is the exact error message that you receive with the error code as appropriate?
· What is the service pack installed on the computer?
· What is the number and the model of the computer?
Try the methods below:
Method 1:
Try to perform the last good configuration on the computer and check if you are able to boot to the desktop. You can check the link for the steps below: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852
Method 2:
If the first method does not work, you can follow the procedure (method 2) from the link below and check off the results: you are prompted to activate Windows XP or Windows Server 2003, each time that you start the computer: http://support.microsoft.com/kb/312295
With regard to:
Samhrutha G S - Microsoft technical support.
Maybe you are looking for
-
Firefox crashes all the time - from "does not" to a complete crash. I've tried safe mode, I tried to reinstall, nothing works. I am now downloading Chrome, unless someone has simple solutions. Ta
-
I use Windows XP SP3... I do not want to install anything until I have a clear answer on downloading Firefox 6.0 without disabling my Norton Toolbar with Identity Safe. If I get the same old answer the live performance updated again and again and jus
-
Keyboard, type the foreign letters
Yesterday my keyboard worked today a few letters type extra charaters when you press. example: y = ' h yp = u [8hn g = yp7gb o = 5o\0 n = [8hn IM currently using keyboard on screen, but that used to help me log in the admin of my computer part. Pleas
-
update not always fail... Windows 7 is what I have not upgraded to 10... need help with update thanks
-
BlackBerry Smartphones new user with a doc go problem
I upgraded my OS to 4.5 on my Curve 8330 and got the docs to go without excel. I set excel as has been stated in one of the threads but now when trying to get HTML put in place I lost the game excel (my incompetence not the HTML process). I tried to