Stop 'reasons' R2 2012 Windows

Similar Questions

• An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

  An error occurred while the suspension the 2012 Windows R2 VMS on ESX 5.1 update 1 and ESXi5.0 Udpate3. Can someone help me what is the reason for that and how to fix this?

  This issue has been resolved with the article below

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2015181

• Reattach the EqualLogic iSCSI for 2012 Windows volumes

  Hello

  We use EqualLogic, Windows 2008R2, HIT and initiator iSCSI access volumes. Now I'm re - install OS to Windows 2012. All materials, IP addresses, volumes, host name will be the same on the new operating system. BONES of some changes. Will it be the right way to remap the iSCSI volumes to the new operating system:

  1. on windows 2008 R2 take the volume offline in the disk management console.
  2. disconnect "Discovered targets" in the Windows iSCSI initiator.
  3 collect volumes offline in Manager Dell EqualLogic Group (to restore the connections).
  4. the new 2012 Windows Installer 4.5 HIT and set (is this version of the correct software for Windows 2012?)
  5 activate the volumes in the Dell EqualLogic Group Manager.
  6. Discovery target and connect to targets.
  7 collect volumes online in the OS disk management console.

  These steps are correct?
  Are they all necessary?
  Is a correct software 4.5 for windows 2012 HIT?

  Thank you

  Re: connections.  Are you referring to the iSCSI to table sessions?   If so, those are dynamic.  When you stop they will disappear.

  If everything is the same, so technically Yes.  Shutdown, you can reload and bring it to the top.

• Satellite C70D-B-307 - brightness keys stopped working after migration Windows 10

  The brightness keys have stopped working after migration Windows 8.1 to Windows 10 (Satellite C70D-B-307).

  How did solve you this?

• Help! Window 2008 server R2 and R2 2012 window server time synchronize the difference

  Hello Sir/Madam,

  Help! I have a pair of window Server 2008 R2 and a pair of window Server R2 2012, who are the synchronization of time to one destination.

  After that time synchronization is successful, the window Server 2008 R2 clocks are still 1 second faster than those in the 2012 window servers.

  Is there anyone who got the same problem as me?

  Thank you.

  Kind regards
  Samuel

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Original title: licenses

  Hello

  I installed Windows server 2012 standard R2 and for Windows server 2012 ROK Standard license 2CPU/VM.

  Windows has not activated this license.

  Fact R2 support Windows standard server 2012 (Windows server 2012 ROK Standard 2CPU/VM) license?

  Thanks in advance!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Microsoft has stopped issuing licenses for windows 2008R2 Enterprise edition?

  Please specify if Microsoft has stopped issuing licenses for windows 2008 R2 64-bit Enterprise edition.

  Kind regards

  Aravind.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How stop the downloads duplicate Windows Live Photo?

  How can I stop duplicate in my windows live photos? Is there a setting for this? I'm so sick of deleting photo after photo! Thank you very much.

  Hi brandyhutton,

  Thanks for posting your question in the Microsoft answers Forum. For any questions about Windows Live Photo Gallery, please visit the Community Windows Live Photo Gallery.

• Recently Windows XP stopped recording previously sizes windows and go back to a default size.

  Original title: XP recording does not previously window size or view

  Recently, XP stopped recording sizes previously windows.  They always come back to a default size and position when opened.  Also, I always pass to the 'Détails' mode and it comes down to "Icons" when the re-opening a window.

  I lost a dll? or is there a way to get this back to the way it was?
  Thank you

  Hello

  You can open the window to the desired size and close the window by clicking on file, then close.

  Next time, when you open the window, you should remember that the windows of size when it was closed the last time.

  For more information, see the article:

  To resize an open window

• 7 error "Paris 7.2.241.1enRegInstaller.exe of work and has been closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Original title - 7.2.241.1enRegInstaller.exe

  Hello.

  Today, JUST after I "Set Windows to update," twice, I got the disconcerting message:

  "Paris 7.2.241.1enRegInstaller.exe of working and was closed".

  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Any wisdom or experience with this?  I'm on a 64-bit HP Pavilion older (dv7-1245dx) with this OS JUST-update Windows (Vista Home Premium).

  Thank you.

  GIES W

  The solution has been found just uninstall bing bar, restart the computer, and if you want just bing toolbar to reinstall. This easy solution my system fixed.  Bing has again reminded all my points that I have amassed

• EXPLORER WINDOWS HAS STOPPED WORKING. EXPLORER WINDOWS RESTARTS. RIGHT CLICK

  Have Windows Vista.  When right click on photos, files photo or zip files error message appears: WINDOWS EXPLORER has STOPPED WORKING.  EXPLORER WINDOWS RESTARTS.  This error message also appears when you use the Remove button to delete the photos.  I did a registry cleaner, disk/driver cleaner, catering to a specific date.  I get to the point of confusion when searching for answers.  All opinions on the ShellExView or should I do a clean boot?  Help!

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• bought a brand of DVD cards 2010, but keep getting the message that Hallmark Card Studio 2010 has stopped working a problem casued the program to stop working correctly. Windows will be

  I bought the Hallmark Card Studio 2010, I am operating Vista 64 bit the message I get is that Hallmark Card Studio 2010 has stopped working.  A problem casued the program to stop working correctly.  Windows will close and informs you if a solution is available.  I also downloaded the Windows 7 Upgrade Advisor and I get the same message with it.  It will not work.  All of the suggestions.  Thank you.  Carol M.

  Hello

  • Have you tried the suggestions of Imran M in other post?

  You can view these methods:

  Method 1:

  Temporarily disable UAC and check if the problem persists.

  1. open Control Panel.
  2. under the user account and family settings click on the "add user account / remove."
  3. click on one of the user accounts, for example, you can use the guest account.
  4. in the user account, click on the link "go to the main page of the user account.
  5. under "Make changes to your user account", click on the link "change security settings".
  6. in him "turn User Account Control (UAC) to make your computer more secure" click to deselect the "use User Account Control (UAC) to help protect your computer. Click the Ok button.
  7. you will be asked to restart your computer. Do when you're ready.

  Warning: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:
  I recommend the clean boot and try to run the program.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Cannot install problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

  Original title: program problem caused to stop working correctly. Windows will close the program and notify you if a solution is available.

  On a number of attempts to install programs on my laptop with Vista home premium OS, I get the message, "caused a problem program to stop working correctly.  Windows will close the program and notify you if a solution is available. "The program closes, but I am never notified a solution, and my attempts to solve the problem have not had any positive results.  Among the programs that I tried to install are not important to me, but I really want to install Blackberry Desktop Software.  Everything seems to go well with the installation until suddenly I get this message.

  Hello

  1. what programs are they?
  2. What are they compatible with windows vista?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

  I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)

  After starting my Windows I got these message below

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.256.6
  Locale ID: 2052

  More information about the problem:
  BCCode: a
  BCP1: 00000000
  BCP2: 00000002
  BCP3: 00000001
  BCP4: 82E9837B
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini041011-01.dmp
  C:\Users\TanXR\AppData\Local\Temp\WER-104083-0.SysData.XML
  C:\Users\TanXR\AppData\Local\Temp\WER8B1F.tmp.version.txt

  
  C:\Windows\Minidump\Mini041011-01.dmp

  View your dump using file:
  BlueScreenView v1.32 - seen BSOD (blue screen) crash information stored in the dump files.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  For each accident displayed in the upper pane, you can view the details of the drivers of the devices loaded during the crash in the lower pane. Do a search on google for the drivers to know what device belongs to uninstall, reinstall, or download the latest driver from the manufacturer website.

• NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.

  Message that appears is: -.

  Windows has stopped this device because it has reported problems. (Code 43)

  BB

  Install the latest driver from nVIDIA:

  http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html

  http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/