Stop supporting the SOPA and PIPA!

Similar Questions

• SOPA and PIPA

  This is not directly related to the LabVIEW but he wanted everyone to be aware of something that could dramatically change this and all the forums software such as we know them today. I was going to post this on breakpoint , but I wanted more people to see if it please forgive me.

  I read this thread on copyright on the lava and the posted queue Aristos a same scenario frightening about what could happen SOPA becomes law. (This is a link to Wikipedia that will be down in the world later today to protest these laws)

  Basically what is happening now, is that if someone posts the code under copyright on this forum, that person is legally responsible. The copyright owner can sue that person and the order NOR to take down the offending content. This applies to screws, clips, screenshots, etc. If SOPA become law then NOR will inspect any code and determine if it is legally displayed. If someone illegally post another code under copyright of people and someone download it then OR would be legally responsible. It would be more convenient for this forum to exist. Same for any forum that allows attachments.

  Here is a good list of reasons why you should oppose to SOPA and PIPA. What can do you? It is probably fatalist, but I don't have a good feeling about the future.

  36 years ago, I raised my right hand and swore as God as my witness that I will defend the constitution of the States participate.

  The authority to implement and accept the Constitution was derived from the declaration of independence which reads in part;

  When, as part of the events, it becomes necessary for one people to dissolve the political groups which have connected them with another and to assume among the powers of the Earth, the separate and equal station to which the laws of Nature and of the God of Nature entitles them, a decent to the opinions of mankind requires that they should declare the causes which push them to the separation.

  We hold these as obvious truths, that all men are created equal, that they are endowed by their creator certain inalienable rights, that among these are life, liberty and the pursuit of happiness. - that to secure these rights, Governments are set up among men, deriving their just powers from the consent of the governed,--that whenever any form of Government becomes destructive of these ends It is the right of the people to change or abolish it and to institute new Government, its foundations on such principles and organizing its powers in this form, as to them is apparently the most likely to perform their safety and happiness. Prudence, indeed, will impose that established Governments for a long time should not be modified for causes slight and temporary; and accordingly all experience has shown, that humanity is more likely to suffer, while evils are sufferable, rightmost themselves by removing the forms to which they are accustomed. But when a train of abuses and usurpations, pursuing the same subject long manifested a design to reduce them under absolute despotism that is their right, it is their duty, to get rid of this Government and to provide new guards for their future security. -.

  emphesis and font size adjusted by me.

  There is part of me saying that it's time to rise and meet the oath that I swore.

  This sweet lady that I swore to defend is be sullied by those who claim to represent.

  Ben

• Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to install and give the message that it does not support the BONES - and it says unsupported windows vista and we have windows 7

  Try to force the lightroom Installer to run in Windows 7 mode:

  Right-click on the Setup file and select Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

• How to find the version of the AIA and PIP

  Is it possible, where we can find the version of the AIA and PIP installed on a server?
  
  Thank you

  If you open the page of the AIA on http:///AIA browser, you should be able to go to the Configuration tab and display the version.

• my iMac will stop all the time and I have to unplug it to restart

  Sometimes it gets really hot I ever noticed with this mac but I have on my other Macs.

  I ran Etrecheck and here's the report.  Can someone help me please

  
  

  
  

  Description of the problem:

  Shutdown

  EtreCheck version: 2.2 (132)

  Report generated on 30/09/16 13:56

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Material Information: ℹ️

  iMac (20-inch, mid 2007) (checked)

  iMac - model: iMac7, 1

  1 2 GHz Intel Core 2 Duo CPU: 2 strands

  6 GB of RAM expandable

  BANK 0/DIMM0

  2 GB DDR2 SDRAM 667 MHz ok

  BANK 1/DIMM1

  4 GB DDR2 SDRAM 667 MHz ok

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ℹ️

  ATI, RadeonHD2400 - VRAM: 128 MB

  iMac 1680 x 1050

  System software: ℹ️

  OS X 10.10.5 (14F1912) - since the start time: 04:35:15

  Disc information: ℹ️

  Q ST3250820AS disk0: (250,06 GB)

  EFI (disk0s1) < not mounted >: 210 MB

  Untitled (disk0s2) /: 249,20 (Go 47,18 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  USB information: ℹ️

  Built-in ISight from Apple Inc..

  Sunplus Innovation Technology USB to Serial - ATA bridge 252.4 MB

  disk1s1 (disk1s1) < not mounted >: 252 MB

  Computer, Inc. Apple IR receiver.

  Apple Inc. Bluetooth USB host controller.

  Guardian: ℹ️

  Mac App Store and identified developers

  Kernel Extensions: ℹ️

  / System/Library/Extensions

  com [loading]. Cycling74.driver.Soundflower (1.6.7 - 10.7 SDK) [click for support]

  [no charge] com.Nike.sportwatch (1.0.0) [click for support]

  /Users/[redacted]/library/services/ToastIt.service/Contents/MacOS

  [no charge] com.roxio.TDIXController (2.0) [click for support]

  Launch officers: ℹ️

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [click for support]

  [operation] com.nike.nikeplusconnect.plist [click to support]

  [loading] com.oracle.java.Java - Updater.plist [click to support]

  Launch of the demons: ℹ️

  [loading] com.adobe.ARMDC.Communicator.plist [click to support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [click to support]

  [loading] com.adobe.fpsaud.plist [click to support]

  [loading] com.bombich.ccc.plist [click to support]

  [loading] com.oracle.java.Helper - Tool.plist [click to support]

  Elements of user login: ℹ️

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Internet Plug-ins: ℹ️

  FlashPlayer - 10.6: Version: 23.0.0.162 - 10.9 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  AdobePDFViewerNPAPI: Version: 15.017.20053 - 10.11 SDK [click for support]

  AdobePDFViewer: Version: 15.017.20053 - 10.11 SDK [click for support]

  Flash Player: Version: 23.0.0.162 - 10.9 SDK [click for support]

  Default browser: Version: 600 - SDK 10.10

  Silverlight: Version: 5.1.41212.0 - 10.6 SDK [click for support]

  JavaAppletPlugin: Version: Java 8 update 91 build 14 check the version

  The Safari Extensions: ℹ️

  TrafficLight

  Ghostery

  IncognIt VPN switch

  3rd party preference panes: ℹ️

  Flash Player [click for support]

  Java [click for support]

  Time Machine: ℹ️

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Untitled: disc size: 249,20 GB disc used: 202,02 GB

  Destinations:

  LaCie imac [Local]

  Total size: 494,68 GB

  Total number of backups: 14

  An older backup: 2016-09-13 04:29:11 + 0000

  Last backup: 2016-09-22 22:39:28 + 0000

  Backup disk size: too small

  494,68 GB backup size < (disc 202,02 GB X 3)

  By CPU process back to the top: ℹ️

  3% WindowServer

  1% nsurlsessiond (2)

  1% fontd

  1% cloudd

  0% taskgated

  Top of the process of memory: ℹ️

  1.08 GB com.apple.WebKit.WebContent (9)

  508 MB kernel_task

  313 MB Safari

  Mds_stores 129 MB

  Cfprefsd (2) 129 MB

  Virtual memory information: ℹ️

  1.46 GB of free RAM

  Used 4.54 GB RAM

  Used Swap 0 B

  Diagnostic information: ℹ️

  Sep 30, 2016, 09:19:18 test - passed

  September 29, 2016, 09:54:29 /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.preferences.extensio ns.remoteservice_2016 - 09-29-095429_ .crash [deleted]

  September 29, 2016, /Library/Logs/DiagnosticReports/networkd_2016-09-29-052456_[redacted].crash 05:24:56

  Sep 28, 2016, 08:48:21 / Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-09-28-084821_ [redacted].cpu_resource.diag [click for more information]

  Hi there champrider,

  It sounds like your computer guard stop on its own, and the only way you can get it to come is to unplug for a while. If you get some sort of error when the computer restarts, take a look at this article:

  OS X El Capitan: If your Mac restarts and a message

  If this isn't the case, then I suggest starting in safe mode to delete a few caches as well as system-level to check and fix if necessary startup disk.

  OS X El Capitan: start in safe mode

  If the problem persists then I would then reset the SMC on your computer:

  Reset the management system (SCM) controller on your Mac.

  Thank you for using communities of Apple Support.

• InDesign suddenly stopped supporting the properties or methods

  So I feel a little ridiculous to have to ask the question, but it seems that during the night (i.e. between close and turn on my work system), InDesign has abruptly stopped some properties or methods. I had already written a script running using, among others, styleExportTagMaps.add, and epubExportPreferences, they now return the standard ' object does not support the property or method ' error. " I'm under InDesign 5.5 with the object model of 7.5.

  A usage example:

  myPGS_CH.styleExportTagMaps.add({exportType: "EPUB", exportTag: "h1", exportClass: "h1", exportAttributes: ""});
  

  myDocument.epubExportPreferences.includeDocumentMetadata = true;
  

  Guidance as to what could have changed?

  Thanks in advance,

  Julian

  So to answer my own question, for those who might come across the same problem in the future: the problem in what I used glue code, that encrypts the app.scriptpreferences.version 6 - a version that does not support such functions. Just remove this line from your glue code or set it to a newer version to fix the problem.

• where can I find firefox for Windows 10 who support the JavaScript and Norton

  I had problems all this Sunday can not enter in the emails. bankAccounts or facebook because allways firefox41 tell me I need to install and activate JavaScript. I have Windows installed 10. My laptop is 1 year old HP. I also prefer to use Norton. What can I do? Can Andy I find an older version of Firefox in Norwegian?
  Thanks for listening.
  Michele your

  Firefox's JavaScript should be enabled by default. Can you provide more information about the messages that you have found on this subject?

  At the same time, to examine the question of Norton and your language:

  Norton has been a big topic of communication of updates for Firefox via LiveUpdate a few days before each new version of Firefox is available. But that changed with Firefox 41. Due to the change in Firefox (which was originally going to be in 40 Firefox but was delayed at the request of Norton and maybe a few other companies), the toolbar needs major changes and they are still not available yet. Norton issued a statement on this subject: https://support.norton.com/sp/en/us/home/current/solutions/v115161915_EndUserProfile_en_us

  If you want to use an updated version of Firefox that allows to run the current Norton Toolbar, there are another option. You might consider a different variant of Firefox called the Extended Support Release (ESR) for the moment. ESR is designed for businesses that require a cycle time longer between changes to the features, but anyone can run it.

  ESR is currently based on Firefox 38. It will get updates of security over the coming months, but not to get new features, so changes in Firefox 41 concerning the compatibility of the add-on will not be out for a good time.

  Norton is likely to continue to support the ESR until the new update of toolbar. After that, I don't know what they will do because normally they don't take over a small range of versions.

  If you decide to try it, here's how I suggest to install:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 38.3.0esr of https://www.mozilla.org/firefox/organizations/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\Fx41
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\Fx41
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  Success?

  Note: Some plugins can only exist in the old folder. If it is missing something essential, present in these files:

  • \Fx41\Plugins
  • \Fx41\browser\plugins

• Fresh paint supports the tablets and stylus pressure sensitivity?

  I'm going to buy a new computer running Windows 8.1 and I can't wait to try the fresh paint. I have a tablet that can double as a graphics tablet 1024 levels of pressure. I find that not all apps/programs support the Wacom pens or tech screen and I was wondering if the fresh paint supports.

  Thanks for your time!

  Yes it is of course all 1024 on the Surface pressure levels.  Be sure just what tablet you buy has the levels of pressure sensitivity and it will use the fresh paint.

• Mouse randomly stops on the desktop and in Windows 7 x 64 applications.

  (Clean), I installed Windows 7 64 bit on my desktop and have experienced random/the mouse cursor pauses while using the system.  The break is almost as if the system is in heavy CPU mode and then everything catches up.  It happens every minute about and lasts a second or two.

  The mouse is a Logitech MX510 wired (not wireless) USB mouse.   I use the Win7 default mouse driver (as recommended on the site Web of Logitech).

  I tried all of the following conditions:
  -J' kept the Task Manager open to see if it seems to be all rhyme nor reason for applications that are at the top of the CPU usage when the break happens, but have not been able to discern a trend.
  -J' tried several different USB ports, including the external USB hub as well as different ports on the system itself
  -J' stopped my antivirus real-time protection real (Microsoft Security Essentials)
  -J' used both the plain built Win7 in pilot as well as the software Logitech SetPoint (64-bit version)
  -I am at my last revision of the BIOS to my desktop (Dell XPS 710)

  This has no effect on the issue.

  Issues happening with open applications and with nothing else running but the OS (and appropriate background apps).

  Needless to say, idle random mouse is infuriating when you try to use the system for all the ideas are greatly appreciated.

  Thank you!

  I have dealt with this issue for some time and I think I can finally say that it isn't a problem of operating system. Same behavior takes place on MAC, Linux. Also, it is not limited to USB, bluetooth mice have the same issues. What I've found, is that there is a HUGE conflict between wireless devices that share the same 2.4 Ghz band (mouse, keyboards, routers, network cards, etc.).  It is not as noticeable on other devices because there is no visual indication of the problem, but the question is there (see latency).

  From what I can tell (I spit balling here) is too crowded. In simple terms, that's the radio band is too crowded. If you just pull the list of routers in many areas, you will see at least a dozen or more. Try this to humor yourself, start downloading something on a nearby wireless computer and see if the other PC mouse starts to work.

  I hope that that completely on this one cause if I'm right there may be not all patches to come until someone pass the mouse a bunch of diff.

  See you soon

• How to read files torent on windows media player, I downloaded torrent files and wmp says unable to play because he does not support the format and how it has been compressed

  How do I play torrent files and .torrent file to play on wmp extensions, I doown loaded torrent sons and dossier they won't play I get undeclared can not play because it does not support the file or extension or does not know how he formatted or compressed

  Hi tuellahjones,

  I suggest you to update the codecs and check if it helps to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• Want to return to the default color, so I can stop seeing the Green and purple faces borders

  I only had my computer for two months.

  I'm playing with the colors, and now I can't go back to the default colors. I managed to get rid of the purple text, but cannot get rid of the Green faces with everyone, stories in my own personal photos.

  I SEE everywhere is purple and green.

  I took many choices by going to "customization", but all I want is to go back to normal / default. I don't want text and colorful faces!

  I've been in Control Panel > appearance and personalization > personalization.  I don't want this COLOR; I just want what it was when I bought it.

  Thank you, Bill, but the instructions in the link you gave said I must have an administrator account; I don't.

  I called Dell tech support today and this guy couldn't have known what to do after an hour of playing with it remotely. He wanted to send me a label and I could box it upward and send it to them.

  He put me on hold, and I just hung up.

  Then, I took it back where I bought it.  This store asked me to leave it for a week.

  So I went with the computer and sales one of the guys to let me use his computer to get onto a chatroom with their own technical support.  Their tech support guy had me do an uninstall of graphics and then reinstalled.

  It worked. Yay!

• Captivate 8 - I want my slides to stop at the end and wait for a button click advance

  It works when published as HTML5, but NOT as swf.

  (I have these put specific slides on break at the end.  They contain stuff that the user may want to write down).

  Instead, the swf goes to the next slide and THEN stops.  Instead of using the next button, the user must use the button play on the skin.

  Any help would be greatly appreciated!

  I guess you used the on Exit event for a break? In this case the SWF behavior is a normal behavior: the action takes place only after the exit of the slide, so break will be on the first frame of the next slide.

  Why not add a click box, it time for the rest of the slide and it will pause at the last image. And you're talking about a next button? Why not use the interruption of this button to pause the last image (or almost the last image)?

• I want to know the version or the year for which firefox support the decoding and encoding of characters?

  Please provide details of char encoding in firefox

  Those are just broken web pages that are not sending as real characters, but are ignored.

  You can decode the text with this code in the Web Console (Firefox/tools > Web Developer)

  • http://www.chandigarh.amarujala.com/feature/crime-bureau-chd/chandigarh-rape-87/?page=1

  E=document.querySelector(".spl-stryMn > span:nth-child(5) > p:nth-child(1)");
  E.innerHTML=unescape(E.innerHTML);

  • http://Rajasthan.amarujala.com/feature/samachar/sports/sports-special/special-features-on-india-vs-south-africa

  E=document.querySelector("#special_story > span:nth-child(4)");
  E.innerHTML=unescape(E.innerHTML);

  Right click on the text and open the Inspector.
  Right click on the HTML code in the left pane and use the selector Unique copy to copy the selection to the Clipboard and use it as a selector in the above posted JavaScript code.

  • https://developer.Mozilla.org/Tools/Page_Inspector

• Windows Vista Home Prem x 86 has stopped doing the updates and update history disappeared C0000022 error code

  It happened about 10 days ago, and about 2 days ago popped up validation error w / error OxC0000022 code, can not find these codes anywhere. I have a black desktop. This computer was my daughters before she settled in the West, and I know that she had problems with the validation before I remember to tell him something about this, it was a bear, she had to get help from MS to help. But it is very difficult to get in touch with him and I don't want her to think that old dad don't know what hes doing. I installed the virus and malware and a few budget programs the wife play WOW on it but, despite this, it is working long hours. My daughter had updated Automatic, disabled, looks than year and a half she had it when I turned on updates it took several days to catch up.but which was about three months ago. Like I said that happened about 10 days before he gave not me all the problems of the six months that I got it. Any help would be appreciated.

  I installed [anti-virus and anti-malware application?]... My daughter had updated Automatic, off, looks like a year and a half...

  Naughty, naughty girl! See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• howcani stop all the photos and videos of the net appearin in the negative?

  Videos and pictures of the net appear in the negative, it's fixable?

  Can you provide more information, in a program? What program?
  In negative form do you mean negative black and white or appropriate where black is white and white is black?
  They lost all the colors?
  What types of files are they?
  -What happened to all the pictures and videos? or only those of the net?
  It happens at all on the net or just a site?