Stop the Service Console and shell scripts

Similar Questions

• separate the vlan for the service console and vkernel

  Hi all

  I need to restructure my environment uat and dev, keeping both under vcenter even. I run the machine with 4 NICs (currently using 2 each for sc + vk & vm port with eather channel gp). The reason behind this is that we have stored separately (using nfs) in uat and dev segment to be used by the servers (virtual and physical) in the respective segment. I'll take 2 clusters as uat and dev. wanted to help the same regardeing

  • wanted to know if I can get my service console and vmkernel running on VLANs separate as shown below
    • UAT cluster
      • SC - 10.10.11.x
      • VK - 10.10.12.x
    • dev cluster
      • SC - 10.10.11.x
      • VK - 10.10.50.x

  kindly let me know for further information on above, any other suggestion on above will be useful

  Yes your SC and VMkernel networks running on different VLANS will work - it is a best practice.

• Change the id vlan of the Service Console and now can't connect

  Hello

  My ESX 3.5 server was with a Service Console PG and a PG VMotion on vSwitch0. There are 2 physical NIC assigned to the vSwitch, which are transmitted to the 2 physical network switches.

  Guys id assigned netoeking vlan 200 to 2 ports on the 2 natachasery physical switches is connected. In the VI client, if I change the properties of vSwitch0-> Console of Service and the value of the vlan 200, I completely lose connectivity to the host. I can't ping the IP address SC longer. I have a keyboard/screen connected to the host and when I connect to the SC, I can't ping the default gateway of the SC or whatever it is.

  I used esxcfg-vswitch to set of the SC vlan id 0 (all) and bingo!, I can speak to the host again and he can talk. The network guys arrure me, they put the vlan id = 200 on the OK physical switch ports. So what goes wrong?

  FWIW, we also have an ESX4 from same host configured the host to 3.5 and it communicates very well. It's the SC a vlan = 200 and issued for the same physical switches.

  George.

  the switch port config are not the same between the hosts of working and non-working.  See http://kb.vmware.com/kb/1003806 for example config

• Service console and VM kernel port group Question

  I have the separate subnet of installation for the service console and the port the kernel VM group. Currently, I plan to install the software iSCSI adapter to connect the LUN. Is there something else I need to do to configure?

  It is said that if the console VM kernel and service are in separate groups of port.

  Usually I use a different physical network for iSCSI.

  But if you only have two network adapters is not applicable.

  Don't forget the vmkernel interface used for iSCSI is in the same logical network and same VLAN as your iSCSI target.

  I need to create a service console more, I do not have it?

  With ESX 3.x, you need a SC for iSCSI (or routing rules).

  With ESX 4.x is not necessary.

  André

• ESX 3.5: copy files using the service console from a network share to the esx host data store

  Hello

  I wonder. Is there a command that I can run the service console that would allow me to copy a file from a network share on the data store on the esx host?

  Eric

  If sharing is a Windows, you can also use smbclient within the service console and ride sharing.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• the system configuration not saved during the last stop on the service console error

  Hello

  I m getting this msg of error on the service console

  the system configuration not saved during the last stop on the service console error

  but when I tried to run some commands s troubleshoot mode according to the vmware esxcfg-boot - b, esxcfg-boot - p I got an error message like

  bad interprator usr permission denied

  I guess you follow this KB: http://kb.vmware.com/kb/1002503

  But seems like you have file system errors.

  Try to restart your system in init 1

  Then use fsck command to check your ext3 file system (remember that the file systems are not in use and use the - f option).

  André

• Limit the software and Services that run in the Service Console in ESXi 4.0?

  How to limit the software and Services running in the Services Console in ESXi 4.0?

  Hello.

  There is no Service in ESXi Console, and it is not really a lot of apps for ESXi either. Policy and/or limited access is the best way to limit these things.

  Good luck!

• public network for virtual machines, private storage and the service console?

  Hello

  So far I had a pretty small facility with 2 servers with 4 physical network adapters each running ESX 3.5, a small box of EqualLogic SAN to shared storage and a few virtual machines on our network of regular reinforcement, routed, not on a private.   The network config was really simple.  I just put everything on real IP addresses on our network of building.

  Now I want to move the SAN and the traffic on a private service console network, but I don't know how to do this.

  Right now I use 2 NETWORK cards on each server:

  vmnic0 is configured on vSwitch0 and has the network of the VM on it that all my use of VMS to talk to the outside world, and it also has the Service Console that uses Virtual Center and I use ssh to it.

  vmnic1 is configured on vSwitch1 and a VMKernel Port and also a Service Console Port for iSCSI Software to talk to my SAN.  (never been clear on why both are needed to talk to the SAN, but doctors say they are)

  My plan is to set up a vSwitch2 and bind it to vmnic2 and implemented a VMKernel Port and the Service Console Port for software iSCSI on the 10.x.x.x network, set up my new (larger) SAN box on the 10.x.x.x network and simply use Storage vMotion to move virtual machines to the new storage space.  As soon as I did this, I would like to not use the Service Console on vSwitch2 and not a Console Service at all on vSwitch0.  Is it possible to delete the one on vSwitch0 and just use a new vSwitch2 for Virtual Center and ssh access?

  So my proposed configuration would be:

  vSwitch0: VM network only, used by the VM guests for oriented public access network, no construction of Network Service Console, linked to vmnic0

  vSwitch1: superfluous once I do storage vMotion of everything on my old SAN, will eventually remove and pair vmnic 1 with vmnic0, linked to vmnic1

  vSwitch2: VMKernel and Service Console on the network 10.x.x.x, used to access the new SAN, used by Virtual Center to access the ESX, used to SSH in to ESX on private network, associated vmnic2

  If it works?

  Thank you.

  Hello

  VMkernel ports cannot live on the same subnet. So if you have 3 vmkernel ports say: vMotion, iSCSI and NFS. You really need 3 subnets. 1 for each vmkernel port.

  Otherwise how does he know all send properly?

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• Adding user to access the Service Console via Putty

  Hi guys

  I'm quite new to the world of Vmware, so please exuse me if I look trivial.

  Basically, I want to create a user in order to access the service through PuTTY console.

  I tried with the root , but it says access denied. I have read the forums and I know that I need to create a new user, and then get to KNOW, but could you please tell me how and where I can create this user as I can only find Permissions tab for ESX1 (our esx server). What I need to for this to the service console physially enter the sever room or can I create this user using one of my domain accounts for VIC 2.5

  If I can do or could you please guide me further

  Also is it possible to use the service of the VIC, if so how.

  I would be very grateful if you could give me an answer for what I send the vizionsupport logs from the console using some of the linux (vmware controls), I think that I can do that by logging in on the ESX Server service console.

  Concerning

  Rucky

  To add a newuser you would do the following in the console of the ESX host.

  useradd username (where username is the name of the user account)

  passwd username (This will prompt you for the password for the user)

  Now this user must be able to connect via SSH

  You can then run su - (you will be prompted for the root password) that will put you in a root shell

  Also, you could edit/etc/ssh/sshd_config (using vi or nano)

  and change the following line

  Of

  PermitRootLogin not

  TO

  PermitRootLogin Yes

  type of service sshd restart (you should do this in the console) this will then allow you to ssh to the system as root.

• AppleScript and shell scripts

  I'm on Mac OS X 10.11.2 and have problems with AppleScript and shell scripting.

  The following script is a cutting of a larger project:

  Tell application "Finder".

  the value the_MePath (path for me)

  the value the_MeCont (the_MePath container) as string

  tell the end

  the value of the_MeCont (text 1 thru-2) the_MeContShell

  -normally isn't here!

  the value the_MePara (the_MeCont & "STH - C Para WAV_48k_24.txt")

  the value the_Parameters (opening for access file the_MePara with permission to write)

  write ("WAV\r24\r48000\r48k\r") the_Parameters

  Close access the_Parameters

  -normally isn't here!

  -destined to be there!

  -the value the_MePara (shell script 'find' & city form the_MeContShell POSIX path & "-iname" "Para STH - C *'")

  the value the_Parameters (opening for access file the_MePara)

  the value the_ParaList (read the the_MePara file)

  Close access the_Parameters

  paragraph 1 of the value userFormat the_ParaList

  paragraph 2 of the the_ParaList the value userBitDepth

  paragraph 3 of the the_ParaList the value userSampleRate

  paragraph 4 of the the_ParaList the value shortSampleRate

  The lines between the "-normally isn't there!"-lines fills a file in the directory of the AppleScript with the data.

  So now the file is there.

  If I remove these lines and enable the line below "-intended to be here! ', the shell should find this file.

  What I get, then, is a mistake:

  "Fehler beim Zugriff auf das Netzwerk." error number - 5000 file "/ users/shared/_AppleScript development/_Archiv Sniplets/STH-C Para WAV_48k_24.txt" to "class fsrf".

  to "open for access file the_MePara.

  Any ideas, anyone?

  Kind regards...

  ... Maik

  Hello

  Remove the end of file before the_MePara.

  the_MePara contains a posix path type path--> "/ users/shared/_AppleScript development/_Archiv Sniplets/STH-C Para WAV_48k_24.txt.

  You can use the file on the path of type HFS --> ' StartupDiskName:Users: shared: _AppleScript development: _Archiv Sniplets:STH - C Para WAV_48k_24.txt.

  Information:

  The script didn't need to open and close the access when the script to read-only.

  Use this line only--> the value the_ParaList to read the_MePara

• Can not stop the Windows Help and Support screen to appear several times

  I tried to us Windows Defender and features WindowTurn on or off programs in vain to stop the Windows Help and Support screen to appear several times offering assistance on everything that I've just selected if it is a selection of function or the word internet. The copy of Vista came with my new Dell laptop. I have another laptop HP with Vista but do not have to go through this on this subject.

  Advice to address this very frustrating situation would be appreciated.

  Hi Maree33,

  Let's run Windows Update and make sure that you have all the latest patches and service packs loaded.  In Internet Explorer click Tools then Windows Update and follow the instructions.

  You can also give a quick call Dell and see if this is a common problem with their OEM version.

  Please let us know the results.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When is unavalible Vista Express Upgrade become when they did stop the service

  When is unavalible Vista Express Upgrade become when they did stop the service

  Hello

  See the comment in the banner here as "do you want to upgrade your PC?

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/anytime-upgrade

  and here:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Anytime-Upgrade-frequently-asked-questions

  Causes and Solutions if Windows Anytime Upgrade does not work
  http://www.brighthub.com/computing/Windows-platform/articles/90426.aspx

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to stop the title bar and border of blinking/flashing in Windows 8 Pro?

  Regardless of what is or is not running. A (desktop) application or a program/process of Windows (File Explorer) and it is just down right annoying when watching TV in Media Center. If the 'window' is not full screen or reduced to a minimum and some downtime on the keyboard or the mouse is detected the 'top' window title bar and border blink and get progressively faster and more annoying. This is the top of the window. Why must he beg for attention? And how it stop! In addition, and I'm not sure that this is relevant, but the mouse pointer has a circle flashing next to her all the time. A judgment that would be nice too.

  I think I found a solution to this title bar and border blinks problem. I have a same problem and experienced looking in msconfig, click on the service tab and hide Microsoft. I would try disabling the brand of computer like HP, Dell, Toshiba, etc. I did for my HP laptop and disable its manufacturer, then restart, and the title bar and border do not Flash. We hope that the work plan.

• Command not found in the service console ESX 4.0 u2

  Hi all

  I have a very simple question.

  I have haven´t access to the service console ESX 4.0 for some time and today I need run commands to verify information on some host bus adapters.

  I logged a user then used 'su root' to switch to the ROOT user.

  I use Putty to connect to the Service Console.

  But when I try to execute the following commands it said "Command Not Found":

  vmkload_mod

  esxcfg-module

  I read VMware KBs, that say to use these commands for this version of ESX, but I can´t do run.

  I think the answer is something very simple, but I can´t find it.

  Anyone have any ideas?

  Thank you

  Mark

  Try this command:

  quo

  as documented in http://kb.vmware.com/kb/1006573

• Adding an IP to the service console more

  Hi team,

  We have a race ESX 4 and the service console has already been configured with an IP address, I would like to add an IP more (another beach) so this service console must be accessible by both intellectual property.

  Now my console IP service is 172.18.111.155 with a subnet mask of 255.255.255.0, GW - 172.18.111.1

  Now, I need to add another IP 172.18.105.45 Beach IE with a subnet mask of 255.255.254.0. GW - 172.18.104.1

  Could you please let me know if possible, if so how can be done.

  Thank you

  Akhi

  Hello

  Next, you create just a new vSwitch with your 2nd service console using the dedicated bear. Marking will be on the side of the physical switch.

  If this host is in a HA Cluster, you may receive warnings about redundancy.

  Seeing that it is your 2nd service console, you can remove these messages. Watch http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004700

  Please allow points for correct answers